Windows 7 Installation problems - AutoRun.exe game does nothing

Similar Questions

• Satellite M30X windows 2000 installation problem

  I noticed ribooth has also posted a message with the same problem... but I haven't seen a real answer. The problem: if I try to install Windows 2000 Professional (including SP2) on my satellite M30X-130. The windows 2000 Setup program crashes with a "page in a no fault paged area" in acpi.sys just at the moment where the status in the status bar has been changed from windows 2000. If I press F7 during startup, acpi support is disabled and no page error occurs but the windows 2000 installation hangs on "the first screen" where you should be able to start, stop and? installation. There is no additional hardware installed and I'm unable to partition and format the HD with W2k. If I do it with win98 and create a FAT32 partition and try to install w2k on it I get the same ' page in a no fault paged area "acpi.sys error. Any suggestions to fix this?

  Hello
  Make sure that the system BIOS and other hardware is compatible with Windows 2000.
  This article may also help.

  HOW to: Specify a specific HAL or a third party during the installation of Windows
  http://support.Microsoft.com/?ID=216251

  Good bye

• Windows 7 installation problem Pavilion dv6-6c45eg

  Since I have a free license for windows 7 Professional at home, I decided to install it on my new Pavilion dv6-6c45eg that came with Windows 7 Home Premium.

  The problem is that the installation process stops at the beginning and said something like: "A required CD/DVD drive driver is missing... ", then he gives me the choice to load a driver. I googled a lot since yesterday and there seems to be something related to the SATA driver, however even load the SATA driver installation is not moving forward, after loading the driver it say that no new units have been detected.

  What I tried:

  * Install Windows 7 x 32 and x 64
  * Install from a USB flash drive

  * Install Windows 8 (same problem in Windows 7)

  * Check the SATA in the BIOS (not possible to see or modify on the BIOS F.19)

  * Search for the shortcomings of HD (even changed the HD)

  I'm sure it's something related to a driver, because I also installed Linux (OpenSuse, Fedora and Ubuntu) operating systems and they work fine.
  So, I would appreciate help to solve this problem.
  Thank you very much.

  Marcio

  Hi B Mista, thanks much for your reply, but I finally solved the problem, as described in this link:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/a-required-CDDVD-device-driver-is-missing-USB/61eda679-66cc-4512-B175-d02871394461

  Kind regards

  Marcio

• Windows will not start and automatic repair does nothing

  Hello
  I am on Windows 8 on my desk of game and encountered problems with the start-up. Whenever I try to start the computer, it does this:
  (1) prepare the auto repair

  (2) diagnose your PC
  (3) auto repair couldn't fix your PC
  Whenever I try to click on anything in the advanced options it says I need to sign as an administrator but no accounts are displayed. He then tells me to restart my PC that starts the whole cycle again.
  Is there a solution to this problem? I really prefer NOT wipe the hard drive clean as I already downloaded more than 200 GB of Steam games in the past few months and only have 35 GB per month to redownload the.

  Hi Hazza,

  Thank you for the update.

  When you perform a custom Windows installation, Windows creates a Windows.old folder that contains your previous system files. You can retrieve your personal files from the Windows.old folder and move them to the customized Windows installation.

  You can view the following for more information Microsoft article.

  How to recover files from the Windows.old folder

  It will be useful.

• Windows 7 installation problem - I can not load the disc of windows 7 for

  I can't get windows disk to load 7. I am trying to run the full version on top of XP.
  When I open my computer, always open the D drive then its empty. Any ideas?

  ETA, I try to install the 32 bit one

  I have an answer!

  At least, it worked for me tonight, and I pray it works out for others in this situation.

  I got exactly the same problem as you, except that I wanted to replace Vista with a clean install of Windows 7 on a computer of the 32-bit system IE.  But, like you, it just has not been grateful that there is a disc in there after that many 'click' would say tell me to insert a disc or that there was a disk failure.  I have since bought nine from a retailer, and was not very impressed and nor am I impressed by the response from Microsoft about this problem and must send them a letter expressing my displeasure.  Issues such as this must be properly studied and perhaps added to the 'specifications' of the software to warn buyers to potential problems of certain brands or models of PC.  In my opinion be told to get off the USB drive with a process that most of the audience would find almost impossible to understand and follow and with the many added costs of having to buy a portable hard drive, large enough DVD or USB drive is unacceptable, as far as Windows 7 is not an item to purchase low price as it is.

  In any case, this is what worked for me.

  I came to the conclusion that I wasn't going to lose more than £100 and so I have to use a laptop hard drive in order to make the suggested drive of USB and copy the disc on the laptop hard drive.

  I went into 'my computer', inserted the disc and he started his stupid clicking on and was not recognized, but in the list readers on the left side, I dragged all drive "E" (which is my DVD player and where the disc of Windows 7 was) on the USB hard drive.  This does not seem to have an effect, so I click with the right button on the E drive and press "copy" and "Paste" on the USB hard drive.  Now, I'm not sure if there is just a delay between the first process or if it was this process that has worked (as a result, please try both), but suddenly it seemed to 'wake up' the disc and it was recognized instantly and "run setup.exe" appeared in a pop-up and I could finally install Windows 7!  (Please Note - Although the disc began to copy it to the USB, I could have cancelled at any time so didn't need actually portable hard drive for this process - it just seems to 'wake up' when I tried to copy it somewhere else).

  I really hope it works for all those stuck with this problem and would like to hear if it has.

  Another point to note is that during installation, the computer will restart several times, and each time restarted mine, it got stuck on the screen black 'boot from CD' (due to the computer not recognize drive).  It was, fortunately, easy to solved for me to eject the disc and then close it again (leaving the disc, of course).  The rest of the installation was fine.

  Please, please post on here if the works above for one of you who have problems.  I sincerely hope that it is.

• CS4 installation problem: Flash/Dreamweaver/Fireworks does not open

  Hi, I was wondering if someone could help me. I want to install Design premium CS4 on 32-bit Windows Vista. The installation goes by apparently fine, but then when I try to open Dreamweaver, Flash or Fireworks it evokes error message saying

  "The application is not initialilze properly (0xc0150004)" with these details

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: Flash.exe
  Application version: 10.0.0.544
  Application timestamp: 48 c 73089
  Fault Module name: ntdll.dll
  Fault Module Version: 6.0.6002.18005
  Timestamp of Module error: 49e03821
  Exception code: c0150004
  Exception offset: 00009eed
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 2057
  Information additional 1: 9 day 13
  More information 2: 1abee00edb3fc1158f9ad6f44f0f6be8
  Information additional 3: 9 day 13
  Additional information 4: 1abee00edb3fc1158f9ad6f44f0f6be8

  All other programs work fine, it's just who does not even open. I tried to reinstall in all different directions that I can think of, without AV, MS SQL and IIS cut, office with selective startup, you name it and it still has the same problem.

  Can anyone help me with what could be the cause of the problem? don't know if its a problem installation or a problem of windows (a setting or something) but I would really like to have ideas anyone might have.

  Thank you

  Tom

  Oh yes, when I look in install also newspapers, it evokes this error

  ERROR

  Journal of: object

  isRunning {string}: 0

  percentComplete {string}: 100

  message {object}: [object Object]

  Journal of: object

  {string} code: 0

  args {object}: [object Object]

  which I think refers to the installer of freezing when you check the profile of the system during installation, but it seems to go through install well. It also has the following errors.

  ERROR

  The payload with AdobeCode: {35304775-CB5F-101B-A142-83B5468C225C} demanded dependence on:

  Family: InDesign

  ProductName: Adobe InDesign CS4 icon Manager x 64

  MinVersion:

  This dependency is not satisfied, because this payload is x 64 and is not supported on this computer.

  Removing this dependency of the list. Product may work correctly.

  Had the same error, try to run Dreamweaver CS4 on my Dell Studio XPS laptop:

  This sorting me and works fine now:

  2. use the registry (Regedit) editor to locate and expand the following registry key:

  'HKEY_LOCAL_MACHINE\COMPONENTS\DerivedData\Components\ '.

  4. from the long list on the left, remove the following key:

  'x86_microsoft.vc80.mfc_1fc8b3b9a1e18e3b_8.0.50727.762_none_0c178a139ee2a7ed '.

  Then uninstall, reboot, and install

• Satellite Pro 6000: Windows XP installation problem

  Win98SE works well on my Satellite Pro 6000. I put XP on it.
  During commissioning, I see the logo "windows XP pro. But after loading XP, I have no picture.

  Save mode then also does not work, I can't see anything.
  What I've done wrong? It seems that the video driver is missing?
  With the recovery cd is everything works again. (win98se)

  Someone at - it solution to put XP on this laptop?
  Gr. R.

  Hello

  In my opinion, there should be no problem with the use of Windows XP on this unit.
  As far as I know the laptop came with WinXp pro, W2k and Win98SE.
  In this case, all required drivers are available and must be installed in the correct order.
  I assume that the installation and the installation procedure has been authorized. Did you install it on a second partition? You format the HDD to NTFS?

• Windows Update installation problem

  When I turned off my laptop Windows Vista Home Premium, the system entered into mode "install updates". It has been the installation of update 3 of 8 for more than an hour. The display does not turn off and unplug the machine. The disk led is on continuously.

  Do I have a problem? Should what steps I take? Thank you.

  Hi jayalan,

  Welcome to the Microsoft Answers site!

  The updates take time depending on the size of the file. If the update has hung so I suggest you hard reboot the computer and see if you can boot to the desktop. If you can boot to the desktop and then the updates are not installed will appear and which will be installed during the next update.

  Once done with the step above after starting the computer on the desk. I suggest that reset you Windows Update components and perhaps that should take care of the updates. install the updates by selecting two both than some updates system needs to reboot for the changes to take effect.

  Access the link below to reset the Windows Update components automatically.

  http://support.Microsoft.com/kb/971058

  If the computer does not start on the desktop, then I suggest you to start safe mode and see if you can boot to the desktop. Once you are in the office, do a system restore which will take the computer to a time where it was working fine.

  Go to the link below for the procedure to start in Safe Mode and system restore.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Let us know for if you are unable to boot to the desktop or to get help.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows xp installation problems

  Unfortunately I have no error message as such, first of all the toolbar menu bar and start disappeared in an irreversible way, at the same time that no executable programs would work, no sound would not play and only internet browser as well as wading through my folders and files was the only operational things. After an attempt to remedy this situation, I was told (online) to reinstall windows xp, this seemed an idea without danger at the same time, as I did before attaching unrelated problems, however, when reinstalling (or should I say before installation was complete) in one of the many process, the pc would restart and get to the device registration screen , from there, it's been jammed indefinitely, and flashing icons of many colors and forms have appeared and in some cases, replace a word or a number. (placement and Visual icon seem to be completely random)

  I also read (before attempts to reinstall) it could be a malware problems, well that sounded rather difficult for me, as the malware program would not start let alone clean all the above questions. I have redownloaded malwarebytes and again, unsuccessfully, to get any .exe program to initialize even. An error appeared in keeping it (unfortunately silly me, I had not planned this far ahead and has not copied the error name/numbers)

  I have tried many various difficulties through the system recovery and repair, but without success, I know it's not good to go, but any help at all would be greatly appreciated.

  * note * my usb ports are both issues and was not able to get the most recent of my files on an external hard drive etc, I would really like to come out of this with my hard drive in tact.

  Alternatively, you can attach your hard drive as 2nd drive or slave for other PC work and then just copy the data off the coast.

  Because of the strange characters and colors I would always start the recovery console

  Unfortunately it did not work and the same colors and icons appeared at startup boot via the controls proved to be without success either.

  I have yet to try this another recovery disc, I'll try that now, other then that, it seems that it would be a fixed format.

  Respectfully, that you try many different things absolutely without success. I encourage you strongly to create this live cd, following the instructions on the link in my previous post, recover your files, reformat, re-install and do with it.

  Any method allows you to retrieve your files get and do. You have re-installed windows 10 times since your first post and have been without headaches. It's just my recommendation of course.

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• Python in Windows 7 installation problems

  Hello. I tried to install the Python on my laptop (Windows 7 Pro) language using the Installer MSI Windows x 86 3.2.2 Python from www.python.org. During the installation, I right click and install as an administrator. The command line works very well, but I am unable to get Idle GUI to load. He thinks about it for a few seconds while the blue circle icon appears, then nothing - not even an error message.

  I tried other versions of Python - e.g. ActivePython, with the same result. It does not seem to make a difference, what version of Python that I use. Any help gratefully received!

  Hello
   
  1. you use 32 bit OS or 64 bit one?
  2. What do you mean when you say "I am unable to get Idle GUI to load"? Are you talking about the GUI for the window or the window of the software installation when you try to run it?
   
  Python 2.6 (32-bit and 64-bit version) are compatible Windows 7. It is suggested to install Python 2.6. Please visit the following link for more information. Windows 7 Center compatibility:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=Python&v=Python%20Software%20Foundation&UID=2&l=en&pf=0&PI=0&s=Python&OS=64-bit
   
   
  Method 1: Boot your system in clean boot mode, and then install python 3.2.2. Try now to the KB article to perform the clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/929135
  Note: After you used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.
   
  Method 2: You may need to run the following troubleshooter to install and run Python 3.2.2.
  Open the program compatibility troubleshooting utility:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-program-compatibility-Troubleshooter
   
  It will be useful.

• Roxio Easy Media Creator 9 XE on Windows 7 installation problem

  I have Windows 7 and my software Roxio Easy Media Creator 9 XE do not load. Because Roxio does not more of this software support, can someone tell me how to run.  Or do I now have to buy the latest version of Roxio?

  Many new computers might have some CD burning software packaged with it, you maybe other installed software that you can use?

  You could watch using WMP too.

  How to burn CDs and DVDs in Windows Media Player 12
  http://www.7tutorials.com/how-burn-CDs-and-DVDs-Windows-Media-Player-12

  Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Make older programs in this version of Windows (Windows 7)
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Help with Windows 7 compatibility issues
  http://Windows.Microsoft.com/en-us/Windows7/help/compatibility

  Windows 7 Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  An option of the Virtual Machine can be a solution.

  Windows Virtual PC
  Download Windows XP Mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode (Windows 7 only, but not one of the Home versions) "you are not eligible to download Windows XP Mode. You must have Windows 7 Professional, enterprise or full to run Windows XP Mode."    If you have an old XP CD (or other older Windows CD) available you can simply download the Virtual Machine and spend the XP Mode download.

  This warranty covers the gambit set of VMS in the 'Home' versions if you want to have a look.  Of course you will need a licensed copy of XP to install and run in any of them (except XP Mode).

  VirtualBox is an impressive VM competitor
  http://WindowsSecrets.com/search/?CX=017937947691920082874%3A_ilcm6kdy_y&COF=FORID%3A11&q=VirtualBox+is+an+impressive+VM+contender+&SA=search&advWS=1&advSAN=1&advPages=15

• iMac 27 end of 2012 windows 7 installation problems.

  Dear Apple community.

  First of all I know that the topic was discussed a few more times, but after I tried to follow the instructions and directions and patterns almost everywhere on the net I am a blind spot.

  I have an iMac 27 "end 2012. I managed to install Windows 7 with Bootcamp through a combination of different methods, on line. (downloaded the Bootcamp Support 5.1.5621 software as described in many forums)

  But I am stuck because I always have problems with my UBS3 ports that do not allow my keyboard and graphic tablet to work (I had to uninstall the app in safe mode to return to UB2) and the resolution of the screen that is only 1280 x 720 at the arrow, trash and other stuff that appear distorted.

  Since I'm on some architecture and 3D modeling programs in Windows I want to ask for help because I don't really know where to look further.

  When I solve the problem, I promise to write here a detailed method to install win7 on iMac late 2012 for those in need.

  Can anyone help me to finally get a solution? Thanks a lot for your time and looking forward to hear that here you.

  Hi Polfus,

  Thank you for using communities Support from Apple! I'm sorry to hear that you are having these problems with your Boot Camp installation. If you continue to have unexpected behavior of port connections and display resolutions in Boot Camp, you can find the troubleshooting steps in the following article useful (my apologies if you've seen elsewhere / fact them):

  If you do not see some Mac functionality if you are using Windows on your Mac - Apple Support

  You can also check that you are running the 64 bit version of Windows 7, as shown here:

  Install Windows 7 and earlier Apple Support on your Mac using Boot Camp -

  Concerning

• Windows XP Installation problem with Windows 7 Starter home

  I was told that I would have no problem of family Windows XP Setup on a new computer comes pre loaded with Windows 7 Starter.

  When I insert the CD with Windows XP, I get the following:

  Run setup.exe

  I click on install Windows XP

  Program is blocked due to compatibility issues.

  Setup cannot continue because the version on the computer is newer than the version on CD.

  Anyone know how to solve this problem and install Windows XP?

  Thank you Don

  Hello

  I understand that you want to install Windows XP on Windows 7 Starter Edition.

  (1) is the retail Windows XP version or OEM version, you are trying to install?

  Unfortunately, this is not possible. As the operating system installed on your computer is newer than the operating system you are trying to install.

  To resolve this problem, you need to do a clean install to install Windows XP, and you try to run Windows 7 Setup, it will not work. So, I suggest you to boot from the XP CD (if necessary, first change the boot order in the BIOS) and follow the instructions for a clean install. It will initially format the drive for you, so make sure you back up everything you don't want to lose to external media first.

  I hope this helps. Try the above steps and get back to us for assistance. We will be happy to help you.

• Windows 7 installation problem: device driver cd/dvd not found___

  I am running Windows XP 32-bit and just bought the Windows 7 Home Premium 64-bit. I ran the update Advisor and I can run the 64-bit version - I'm running a 3gig dual-core rig.
  When I start the computer from the windows disk it says above (job title) after waiting ages in the installation program. It is not also take me to a page to do a clean install, as in windows XP when you went blue screen startup. All I want to do is to format my C drive and install Windows 7 above, but happens as if I want to that I don't have.

  I don't want to format my hard drive to find that Windows 7 does not correctly or the other? Any suggestions? Why what is happening and why can't I just do a clean install - i.e. Delete partition, format partition etc and install Windows 7?

  There are 2 main threads for this issue, which seems to be related to the retail drives (and others):

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/48cdc51e-AFFC-40EC-a0ba-62d37948843c#c96e2c40-5d0a-45df-BF47-a6eff30c5d2b

  And the other is a general discussion thread:

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/c211ce29-8e5c-4A2F-AEEE-fc2a6e62aef5

  I posted a few solutions in the first thread, so I would check everything first.

  Also, can you let me know if your machine is a gateway?

  I hope this helps. If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!

• Update of new Windows 7 installation problems

  Hello

  After windows 10 road test for a few months, I decided that it wasn't going to work for me. So I used my drive of windows 7 to do a new installation, after I formatted the hard drive. I installed the operating system successfully, but when I do the 200 some setting to update and to install as failure 8 and it asks me to restart, I do. After he completes the updates I login and then the screen is black except for the cursor that I can move around. I did that only connected things are a monitor, keyboard and mouse and Ethernet and always have the same question.

  I restarted in safe mode, and I am able to do throughout, on the desktop, no problem. So that being the case I thought I could do a system restore and updates from another chance. Well, I did this 3 times now with no luck. I even downloaded the diagnosis of WindowsUpdate tool and when I run it I get the error code "0 x 80070002.

  I honestly have no idea what to do and have not found help online.

  Restart your computer and wait 30 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm