Windows 7 move / resize windows on the monitor power cycle

Similar Questions

• Comm port not detected by VISA / MAX after the device power cycle connected

  I have a device communicating via USB virtual comm port. The device and labview program both work very well, most of the time. The program is designed for the automatic connection for the connected equipment. It works perfectly when I unplug and reconnect the USB cable.

  However, if the unit power cycled as the USB cable is connected and the program/vi is running of things go wrong. The device enters a phase of boot loader for a few seconds to the power upward, if labview tries to query the port comm during this phase the comm port is corrupted in some way and is no longer recognized by VISA / NI MAX. However, other programs, hyperterminal, etc device manager can see and communicate with the port when the boot loader is complete. For Labview / NI MAX to see the port I have to physically disconnect the USB cable. The program does not need to be restarted in order to detect the port comm again and, infact, labview is restarted or my compiled program does not solve the problem. Physically disconnect the USB port allows visa / MAX OR see the port is connected.

  It seems to me that there is a problem with VISA where somehow if a device is not correctly identified by VISA during the first attempt it just does not take into account the port until a physical intervention. Is there a way to force VISA to reassess completely all connected comm ports?

  Hello MJanus,

  As far as I know, most of the virtual com ports are not fully supported by VISA so some quirks in its operation are to be expected: http://digital.ni.com/public.nsf/allkb/6E1922B526572CB8862571AA00544057?OpenDocument

  Officially, we do not support the use of com virtual ports, if unfortunately, the feature you have now is probably as good you'll be able to get with this configuration. I know it's not the answer you were hoping to hear and I apologize for the inconvenience, but it is not really possible visa work well with all software virtual com port due to the wide variety of products available.

  Kind regards

• CC - 10 Windows Photoshop: The monitor profile is defective

  Yes so it's my fellow... 100th post in 2 hours, I'm sorry if I'm spamming the forums today but when I think I have fixed this problem I don't have.

  "" So the other day, ran Photoshop and had the "Monitor"BenQ RL2455 ' profile seems to be defective, please run calibration software, etc. etc. Now, for some reason this problem only happens after I installed windows 10 and does not extend to any of my other art programs.

  This pic is an example of this:

  For some reason any PS, he seems to think that whatever it is with a black background turns a darker violet blues but when I view it in paint tool sai, there is almost no problem what so ever:

  Anyone able to help a frustrated student animation here? Fortunately im on break, so this couldn't have come at a better time * cough * sarcasm * cough *, just would like to get this resolved as soon as POSSIBLE, so I can return to work. Honestly, it's a very strong BONE, but this issue is really makes me mental.

  Im running off a BenQ RL2455 with a Nvidia GTX960. I use two monitors, but my left one (that I listed) is my primary monitor.

  You most likely had a defective profile installed via Windows Update. The next time he gets up, disable this particular update, and it will not be displayed again.

  Manufacturer profiles are surprisingly often broken. Why they can't do things is a mystery, but it happens a lot especially with the BenQ, Samsung, LG, Asus, and a few others.

  The real solution is to make a new monitor profile customized with a Stallion like an i1, ColorMunki, etc. of Spyder. If you do not, then replace the profile broke with sRGB IEC61966 - 2.1. It is usually close enough. Do not know Windows 10, but if there is a control panel > color management dialog box, here's how:

  

  Restart Photoshop when done so it can load the new profile at startup.

  You will see this in Photoshop, because PS is the color management and use the profile when displaying. Many the most other applications are not and simply ignore the profile of anyway, so they are not affected.

• My computer freezes for about half a minute after that Windows puts the monitor in standby

  When I leave my computer unattended for a moment and the monitor turns off automatically, after I come back and move the mouse from the computer freezes completely for about 30 seconds, mouse, it will beep and then returns to normal. Each power saving in Power Options disabled, out of the screen turned off after 10 minutes. Also, I noticed that it is not only the monitor. If I use my computer for, say, 15 minutes, everything works fine. But if I leave it for an hour - freeze. It's a notebook based on AMD/ATI (Fujitsu Siemens AMILO Pa 3553). Any ideas?

  I've identified the cause. Concealment of Auto Start menu is causing my problem.

  You can read about it here: http://social.answers.microsoft.com/Forums/en-US/w7performance/thread/33caf0a9-96ec-46b3-9fb3-1b3d61d52ff0

• Windows XP: the monitor screen is pink

  Original title: John Isaacs

  My screen has turned pink. Would it be a bad screen?

  Bad track or show the wrong adapter.  If you connect the monitor to another computer and the screen is pink while the monitor is bad if you connect another monitor well known on your computer and the screen is pink then the graphics card is bad.

  John

• How can I move precisely image in the monitor by using the arrow keys?

  I am currently using first 13 items on my desktop Windows 10. When I use the special effects of culture, I am able to precisely position the top, down, left and right limiters by typing in a decimal percentages. It works very well, especially when you try to manually move the limiter in the monitor by holding down the left mouse button and dragging. Enter the percentage allows the adjustment takes place easily.

  However, I was unable to find a similar positioning tool for when I want to move the image in the monitor. The only way I know to move the image currently is holding down the left mouse button and dragging the image. What would be the most direct and intuitive way (for me) to precisely move the image, once you left mouse clicked on the clip to show the white frame with its 8 small white squares, simply hold the CTRL key, and then use the 4 arrows to position the image. However, holding the CTRL key and pressing the keys 4 arrow do not work, or not keeping the Alt key and pressing the key 4 arrow, nor does not hold down Shift Ctrl, shift, or Ctrl Alt Shift For me, it would help greatly to a precise positioning, if I could hold the CTRL key and press the arrow key should be.

  Anyone happen to know how to position an image in the monitor otherwise than by holding down the left mouse button and dragging the image where you want?

  Thank you

  With the clip selected on your calendar, click effects applied on the right side of the interface.

  In the effects Panel, open the path properties. Here you can define the Position and the scale and Rotation of your clip. You can also effects and keyframe animated trajectories.

• AL1716 screen turns black after a few seconds. If I turn the monitor power off & on again, it works - 2s

  The monitor worked fine for a few years, so is no longer under warranty. I was about to throw.

  Then the monitor I bought to replace, was damaged on the way to the group practice site.

  Now, I hope to fix the Acer monitor.

  When the computer starts, and a new screen loads, the monitor it shows for a few seconds. Once the computer on the desktop, if I turn off the monitor and turn it back on, it displays the desktop perfectly for a few seconds.

  The monitor I replaced it with also works very well with the computer. He collided with another device, when the car in front of me stops suddenly and there is a piece missing from the screen in the lower left corner. It looks like modern art in the lower part with some of them white and black and a few vertical lines and horizontal lines. I can continue to use it, since what I need lies in the upper part of the screen. I learned the keyboard command to shut down the computer. The windows key, followed by the right arrow, followed by the Enter key.

  I watched a few videos for repair of monitor on Youtube.

  It seems that the capacitors are the typical element which spoils first.

  So I guess I'll break the front off the monitor and see if the card has the capacitors top of the pop up. I can use capacitors with the same intensity of micro-Farouk and the voltage equal or better than the other monitor.

  I've recently learned step secret beginning of successful welding.

  You must have a clean tip.

  When you clean the tip of the soldering iron, it should have the appearance of copper. If weld does not stick to the point, it is not clean enough. I used a wet sandpaper dry and scoured it. They are sold with a protective coating that must be removed. If it is not removed it clogging the tip.

• Audio elements, first 13 (trial), Samsung Ultrabook NP730U3E with Windows 8.1! The problem: if I transfer a clip in the monitor window to the timeline of the audio disappears

  At the moment I have transfer a scene of the window from the monitor into the timeline, my audio disappears. Monitor play sound in the window. How can I solve this problem?

  The problem is resolved by reinstalling the software.

  Gert

• White on the screen of the monitor

  Most of the games I have installed in the system Windows 7 when I run it starts to a black screen and keep black go forever.

  I do physical reboot by pressing the button. What I notice is the monitor power LED is orange, which means no signal is sent to the monitor. The only game that labour is now the other Left4Death DEMO does not at all. Other games that I have that does not work is FEAR2, CALL OF DUTY 2, HALF LIFE orange box edition. My system is Intel Core2Duo 4 GB of RAM and ATI Radeon 5850 operating system than Windows 7 Ultimate 32 - bit Edition. I try checking the Windows Firewall for the authorized program still not working. Help, please. Thank you

  Hello Yellowcali
  Please write to the Microsoft Forums.

  I suggest you to update the drivers of graphics for Windows 7 on this site:
  http://support.AMD.com/us/gpudownload/pages/index.aspx
  Also check out this link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  It may be useful
  Thanks and greetings
  Support Microsoft-dieng
  Visit our Microsoft answers feedback Forum and let us know what you think
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

• The monitor loses signal after some time

  During the installation of windows vista, the monitor would lose the signal after some time (the screen turns black and does not) while the computer is still on.  I am currently using ATI radeon hd 5750 and I tried to connect two monitors to the video card and it wouldn't work (both monitors loser of the signal)

  Hi PaulYea,

  1. what type of Installation are you trying? It's an upgrade or clean Installtion?

  2. what happens when you connect to the system now?

  If you attempt an upgrade installation, then try the update the video card drivers and check:

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  You can also check out the link to the manufacturer to download the drivers:

  http://support.AMD.com/us/psearch/pages/psearch.aspx?type=2.4.1&product=2.4.1.3.43&ContentType=GPU+download+detail&OSType=Windows+Vista+-+32-bit+Edition&keywords=&items=20

  You can also try running Upgrade Advisor and start the upgrade installation

  Check out the link:

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Note: This also applies to Vista.

  For more information, see the link:

  Solving Windows installation problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Windows-installation-problems

  Hope this information is useful.

• When my monitor goes to sleep I can't wake him up by clicking on the mouse. I have to restart the computer to see the monitor

  When my monitor goes to sleep I can't wake him up by clicking on the mouse. I have to restart the computer to be able to see the screen.  I tried all turned on and on the screen but when I do it says monitor going to sleep

  I assume you are using a desktop computer you are referring to the monitor going to sleep rather than the course of PC to sleep.

  1 check the monitor power management & the display adapter in Control Panel, Manager of peripheral and during that control you the mouse power management and make sure that it is likely to be used for anything wake up.

  2 in case of failure, then check the monitor & display settings of the adapter to control panel, display.

  3 check manual site or the monitor stand, so the settings recommended.

  4 then check the settings of the Control Panel, power options, change plan settings change advanced power settings.  In particular, if it is a USB mouse, you may disable settings settings USB, USB selective suspend setting.

• I can't move, resize, reduce or close the window of the browser despite everything inside the window still works.

  I don't know which details are necessary, then I'll just charge everything I can think of.

  I use an Asus laptop with windows 7. I've never had a problem with firefox in the past (beyond the usual freezing and some obvious problems with pop-up advertising that are through for the course with firefox since adblocker never does what he says... not really.) Let us be honest.) I use my virus protection Avast, and it is also up to date.

  My problem started about an hour ago when firefox is not responding. The video, I had to play kept going, but I couldn't interact with anything. Assuming that the program froze for the billionth time this week, I restarted, it. This always solved freezing issues in the past. Now, however, firefox doing something again.

  I can access the menus and almost everything on the window itself, with the exception of the minimize/maximize/close buttons, I can't move the window at all and I can't manually resize. I also noticed that although videos will play, I can only click on their buttons if there is another small window on top of firefox. Video controls doesn't appear to like it and when I click on them firefox comes naturally to the front and the video responds with the key I used, but the buttons disappeared again and I can't resume playback without the smaller window at the front back to the buttons display again.

  It's like half of firefox is frozen while the other half is still ongoing in some way.

  I have no themes that could be the cause. Literally no. I only use firefox for things that can no longer be opened in the opera, so I did not need any theme default beyond. Addons only I installed on purpose were adblockers (God knows why. they don't DO nothing.) Although several other things randomly appear to have been installed over time with the help of one thing or another. Various plugins and players and versions of java, that sort of thing. But I have everything (and I mean EVERYTHING) in the menu of the disabled addon.
  I tried to boot in SafeMode (the program, no windows) and the problem is still there except that now it will appear not the menu bar at all unless I press the first ALT and even in this case, it won't let me actually click on anything in the menu bar. When I try the entire bar disappears. I had to close firefox with the Task Manager.
  Restart will fix the problem for about 15 seconds before it comes back.
  Any attempt to update do not have as it says I am already up to date on everything so I don't know what his issue is.

  It is not an urgent issue now because most of what I need to happen on the screen window that I use, but some of my sites have buttons that literally disappear into something else than to full screen and I guess it will be a much larger gene in the coming days.

  Well, nothing is damaged so far. It seems to be itself has for the moment.
  I think that might have done the trick. Thanks for all the help!

• Quickly move the maximized window from one monitor to another

  With Vista, is it possible to move a maximized window from one monitor to the other with a single click or via a keyboard shortcut (instead of having to UN-maximize, drag and re - optimize)?  I can't download and install 3rd party applications to achieve.

  Hello j8mcmurtrey,

  I was unable to find a shortcut to perform the action you want. However, you can have a look through the available shortcuts that you is provided through Windows Vista here.

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Firefox remember its position of the window on my monitors when closing and re-opening.

  Before the latest updates firefox remember the position of the window when he was finally stop. Now, it still load upper left full screen on my first monitor.

  Win7, especially in XP mode because I don't like aero.

  I move Firefox to the monitor I want.
  

  Expand it to full size.
  Take the title bar and knocking it against the top of the screen.
  When the outline appears, let go.

• Keyboard shortcut to move a window between two monitors instead of drag and drop.

  I want a quick way to move a window from one monitor to the other in a double configuration monitor without having to drag the window with the mouse. This is particularly useful for full screen windows since to move, I have to exit full screen, catch them with the mouse and drag them to the other monitor. Ideally, I want something I can do with a keyboard shortcut.

  I don't know if this exists, I couldn't find it in a list of keyboard shortcuts. I think it would be an improvement for anyone to use multiple monitors which has good reason to need do to switch between several programs. Since windows looks at multiple monitors and identifies each in the settings of customization like 1, 2, 3, etc, it would make the most sense for me to have one high and one low. So if I have a window screen 2, I can hit a keyboard shortcut to move it to the same spot on monitor 1 (low) or monitor 3 (upwards).

  Maybe it exists in form some and I don't find it not, but if not I think it would be very useful, especially for anyone doing graphic design or programming work.

  (Also I filled out the form for that matter like windows 7, which is what I use at home, but he put it under the XP forum since that is what the computer I write from is running on.)

  Use the following key combination to switch between screens.

  "Windows key + SHIFT + key.

  Detailed instructions:
  Press in and hold the Windows key and then add and hold down the SHIFT key. While now hold both hit the left or right arrow key to move the current active window left or right.