CC - 10 Windows Photoshop: The monitor profile is defective

Similar Questions

• Error when I launch Photoshop "monitor profile appears defective".

  In recent weeks, I got a popup error message when I open Photoshop that says:

  "DELL E22IOH G2.2 D65" seems to be defective. Please restart your monitor calibration software.

  If I choose the option IGNORE I can go into Photoshop without error. BUT, if I choose to USE ANYWAY I go into Photoshop and the colors are disabled. There is no more white (it is not a pale yellowish color).

  I have not modified settings in my Photoshop recently (why tinker with something when he broke not?). However, this error message does not go away and would like to correct this problem. Someone at - it already known this before? I googled the problem and saw so-called solutions weird but thought that I would go to the pro to get an answer that I can trust.

  If it's important, I use Windows XP.

  Thank you

  I don't know if the system lists the folders under the main folder of color, but I doubt it.  Create a folder called disabled or defective or something, move E2210H. ICM inside, and reboot.

  Expects that your system will return to associate the sRGB color profile of the monitor default, and that should be acceptable to Photoshop.

  -Christmas

• Windows 7 move / resize windows on the monitor power cycle

  I have a new ultimate install W7 on a new PC (AOpen DEX4501 w intel GM45 graphics). I installed the latest graphic drivers Intel 8.15.10.2202 and all the updates of windows relevant.

  It is connected via HDMI to a HD of Grundig Misuro TV. My resolution is set to 1600 x 900, windows recommended resolution is 1920 x 1080, but appears poorly, so I do not use it.

  When Windows is asleep, or I turn off (and then later) the monitor, most of the windows are moved/resized to the top left with the lower right corner to 1024 x 768.

  Firefox, Excel (2003), resize/move, Outlook windows Explorer (2003) do not move/resize.

  I have a screen of Samurize (like Gadget) on the right who someimes is moved to the top left, but not this morning. The windows resize/move also happens when Samurize is not running.

  I found three other entries related to this;

  • http://social.answers.Microsoft.com/forums/en-us/w7desktop/thread/b79d2dbf-F1A6-4850-9dce-75a52fb1e619
  • http://social.answers.Microsoft.com/forums/en-us/w7desktop/thread/ee8540c4-554e-4467-B304-1f5808e3d11b
  • http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/84f41660-1933-4109-9b13-1ea8a1c27be7

  They do not seem to have been resolved for a long time.

  It is a question of monitor Windows power management, can it be fixed please it is very annoying.

  I don't recommend W7 to others with outstanding issues.

  I've found a workaround.
  With the help of Sysinternals ProcessMonitor I found that Windows was accessing the following registry path;
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\GraphicsDrivers\Configuration

  My system has three entrances;
  DELF003YY7707BR0MUL_30_07D7_6A ^ 9A3774EB79DEE3E3E38496CC7DF4D936
  QHD32000001_31_07D6_D5 ^ 63E1ABDD175E7871DCAEB710418A0F75
  SIMULATED_8086_2A42_00000000_00020000_1010100 ^ CDE365D1B3F0942F0CF38BFB8E127AB4

  Each is a tree called '00' two keys are
  PrimSurfSize.cx
  PrimSurfSize.cy

  Under "00" is also another branch called '00' two keys are;
  ActiveSize.cx
  ActiveSize.cy

  The first two configs (IE... DELF00 & QHD3...) the above keys were 1440 x 900.
  While they were not involved.

  The third (SIMULATED...) have been set at 1024 x 768.

  I changed to 1600 x 900 and the problem was solved.

  Further, I changed resolution (via Control Panel) 1920 x 1080, returned the issue of moving/resizing,.
  but the lower right was set at 1600 x 900, IE the SIMULATED... settings.

  If for any reason any of the configs does not set correctly.

  I don't know why there are three configs, I never used a single monitor.

  Hope this helps someone out there...

• I can't create a new user account (Windows 7): the user profile service service has no logon

  I tried to create a new user account, but I get the following error when I try to open a session with him:

  the user profile service service has no logon

  Until I leave than anything more I will add that I activated the hidden administrator account and this is the account I use to create a new standard user account.

  Most of the patches for this issue are due to the fact that delete manually a user account does not remove the registry key that are associated, and you are required to go to the next section of the registry:

  HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\WINDOWS NT\CURRENTVERSION\PROFILELIST

  and delete the key associated with the user account to be deleted.

  This fix IS NOT help, because whenever I try to create a new user, Windows doesn't bother creating a registry key to the new user.  The new user account appears in the account management window.  If I right click ondesktop and select Properties, then the settings , select the Advanced tab and click settingsunder USER PROFILES, the new account appears not here no more.

  It is a huge problem.  I have other people who use this laptop and I don't want to use my login information, or the guest account.  I'm not editing the registry just to make a new account.

  Please tell me there is a fix for this that works.  Windows 7 was not free, and this kind of problem is very frustrating for the premium software.

  Thanks - this is the only tip that help me to find the solution to this problem.

  Two files in the folder C:\Users\Default\AppData\Local\Microsoft\Windows Live could not be copied without administrator privileges.  This caused the connection in the attempt fail for all newly created user accounts.  The files are:

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\Bici1_00.sqm

  and

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm

  I've added the read permission for all users in these two files and retried the logon.  The opening of session proceeded set up initial user and filled perfectly.  Probably, this problem started when I installed Windows Live Messenger which is the only Windows Live application, I installed.

  Other important in your message board was to check the event log which stressed the two files which could not copy.  Otherwise provided in WARNING messages immediately preceded files event log error message indicates that the profile service could not connect.

• Windows XP: the monitor screen is pink

  Original title: John Isaacs

  My screen has turned pink. Would it be a bad screen?

  Bad track or show the wrong adapter.  If you connect the monitor to another computer and the screen is pink while the monitor is bad if you connect another monitor well known on your computer and the screen is pink then the graphics card is bad.

  John

• My computer freezes for about half a minute after that Windows puts the monitor in standby

  When I leave my computer unattended for a moment and the monitor turns off automatically, after I come back and move the mouse from the computer freezes completely for about 30 seconds, mouse, it will beep and then returns to normal. Each power saving in Power Options disabled, out of the screen turned off after 10 minutes. Also, I noticed that it is not only the monitor. If I use my computer for, say, 15 minutes, everything works fine. But if I leave it for an hour - freeze. It's a notebook based on AMD/ATI (Fujitsu Siemens AMILO Pa 3553). Any ideas?

  I've identified the cause. Concealment of Auto Start menu is causing my problem.

  You can read about it here: http://social.answers.microsoft.com/Forums/en-US/w7performance/thread/33caf0a9-96ec-46b3-9fb3-1b3d61d52ff0

• Monitor profile is defective

  Whenever I turn on CS5, I get an error:

  "The monitor"Samsung - Natural Color Pro 1.0 ICM"profile seems to be defective. Please restart your monitor calibration software.

  No other application don't complain about this.

  The screen is a Samsung SyncMaster 226CW

  If I go... Control panels-color management

  I see that there is a profile "Samsung Natural Color Pro 1.0 ICM (by default) of the SM226CWicm file

  It is the ONLY listed profile.

  According to a previous post here... I followed the advice to remove the profile...

  I remove... I'm invited to choose a new profile... .to from the list displayed there are the "Samsung natural color Pro 1.0 ICM".

  I select this one.

  So the next time I start CS... same error message again.

  How can I fix it?

  Before you delete the profile, click the add lower-left button and scroll down a little ways choose the one with the name: IEC6196602.1, filename sRGB: sRGB Color Space Profile.icm

  Then remove the Samsung profile sRGB profile and select set as default.

• Photoshop CS5 always chooses the wrong monitor in dual monitor profile?

  The folklore is that if you go to EDIT/COLOR SETTINGS and open space RGB Working drop down, and then up on the "Monitor RGB" line in what he says is the profile monitor that photoshop is actually to aid.

  If that's true, then I expect if I run photoshop on my monitor 1 he would show the monitor 1 profile, and if I have PS on Monitor 2 it would show the 2 monitor profile. But in fact, it always shows the monitor profile 1. Naturally, this creates anxiety that PS uses the wrong profile to display my images, because I normally work with the image on the screen 2.

  My configuration: Windows 7 64-bit, PS 12.0.1 x 64. Matrox M9120 graphics card drive two monitors. MANAGEMENT of Windows CONTROL COLOR/PANEL displays a different profile active on each monitor.

  (By running photoshop on a particular monitor, I want to say I run photoshop, drag mode non-plein screen on the desired monitor and close it.) Then I run it again and it starts on this screen (including the start screen)).

  What photographers want to know, that's exactly what photoshop monitor profile used when displaying an image? Where is the answer to this question please?

  The profile associated with this display in the settings of the operating system.

  Photoshop DO fixes for each display separately, using the profiles associated with each screen and correction the same for images that run through several screens.  If you move the window, Photoshop updates the values of color accordingly.  He has done that since Photoshop 5.0.

• How to fix the color profile of the monitor to work in Photoshop

  Hello

  I have a problem with Photoshop on my laptop. When I screenshot of my workplace and paste it into a new file (and repeat the process several times), it looks like the following on my screen: http://imgur.com/5U4j387

  As you can see, with each iteration, the color becomes more yellow-ish. Also, when I take screenshots of websites, they do not show the real colors, but a slight variation.

  On my desktop, it works perfectly: http://imgur.com/V04nOQK

  How can I solve this problem? It's a Photoshop or a display issue?

  Thank you!

  This is normal and expected, unless your monitor profile is be the same as the document profile (e.g. sRGB).

  A screenshot is color monitor, not space color document. RGB values have been converted (by Photoshop, on the fly), they are sent to the monitor. It is the normal color management chain.

  Standard procedure with screenshots is to assign the monitor profile, then convert to sRGB. Then they match.

  Monitor profile is set at the level of the operating system. Photoshop uses any monitor profile sent by the operating system.

• Monitor profile seems to be faulty... Photoshop CC

  I have an AOC 931SWL monitor, it is about 4 years old.  A month ago, I bought a new computer HP Envy, IntelCore 3.4 g CPU, 8 GB of RAM, Nvidia Geforce GT 640 4 GB graphics card.

  I used Photoshop CC without problem until recently operating system Windows 7 Pro update. Since then, I get this error message when I open Photoshop CC "the monitor profile 831W g2.2 D78 seems to be defective please reun of your monitor calibration software" with choice of ignore use anyway. I click on ignore and it's ok, not ok if I click on use anyway.  It is the only program where I get this message. Illustrator, Corel Paintshop, Corel Painter are all ok just to Photoshop.

  I have the original CD that came with the monitor and there the file of the profile on it... 831w. ICM. I also read here in the forum which was suggested to others who have had this same kind of message... but I really need help step by step.  I can replace the current monitor with the original on CD profile and if I where can I find the profile file?

  I really want to be careful, I have some knowledge in computers and enough computer... need help.

  The profiles provided by the manufacturer are notoriously few reliable and often purely and simply defective. The problem is that they are often pushed through Windows Update to unsuspecting users. Avoid them. If you click on "hide this update" the next time it happens he ain't.

  The message of Photoshop means what he says. Choose "Ignore" to throw out and replace it with the default value of Windows, which is sRGB IEC61966 - 2.1. The proper fix is to do a custom profile with a stallion, but if you do not have one he's always better and safer to use sRGB.

  The manual to do this is to go into control panel > color management > devices. Restart Photoshop after that you have changed the profile (to look for the right profile at startup):

  

• Join E-mail from the old profile Windows 10 new profile Windows 10 on same PC

  First profile Windows 10 crapped out. Tech Windows created the new profile and copied everything except the hidden AppData directory. How do I send the old 10 profile Thunderberd windows to the new windows 10 Thunderberd profile?

  you copy the folder of the old folder appdata Thunderb ird to the new.

• Audio elements, first 13 (trial), Samsung Ultrabook NP730U3E with Windows 8.1! The problem: if I transfer a clip in the monitor window to the timeline of the audio disappears

  At the moment I have transfer a scene of the window from the monitor into the timeline, my audio disappears. Monitor play sound in the window. How can I solve this problem?

  The problem is resolved by reinstalling the software.

  Gert

• Error message - monitor profile appears to be defective

  Hello world

  I recently bought a Samsung U32D970 (4 k, Adobe RGB). It comes with a monitor profile (U32D970Q - Adobe.icm) that I have configured in Windows Color Management (it's on Windows 7, 64-bit).

  Whenever I start Photoshop (SC 6 or more recent CC) I get a message that the monitor profile seems to be faulty (the English text might be different, I use a German version).

  When I put "AdobeRGB1998.icm" as the Photoshop color profile starts very well.

  I asked Samsung on the profile, they say they have tested and it was fine. I also used "ICCProfileInspector" to take a look on the profile and produces no error message.

  The fundamental difference between the two profiles is a tag called bkpt (blackpoint) that is present in the profile standard and lacking in the monitor profile.

  There are individual differences in profile settings, so I would use one made for the monitor.

  Anyone any idea on how to make it work? And Photoshop is according to the bkpt tag is the reason for the error message?

  Thank you!

  Joerg

  JvanH wrote:

  And again, I think that a huge monitor producer that Samsung should know how to put in place a correct profile!

  Yes, they should, but they don't. It's a huge problem, because these profiles are shipped via Windows Update, so people don't know what hit them. Dell, Asus, Acer, LG - they all make from time to time.

  As for which calibrator, the i1 Display Pro (about $220) is generally regarded as the best and the most accurate market sensor. The ColorMunki Display, little cheaper, essentially uses the same sensor, with a little crippled software. It should do very well however.

  The Spyder is not as bad as their reputation (a reputation they have acquired a few years ago and was then justified)-, but still the products x-rite must be a safer bet.

• How to set the ICC profile in LR to be identical to PS?

  Hey Adobe,

  . Why my images look much more dark and contrasting in LR (4.3) then they do on PS (CS6) where they have much more of the tonal range? I'm looking at side by side on the same screen. I know this has to do with the ICC profiles, but I can't find how you set that in LR. Any help would be appreciated. An example can be found here: http://mikedodd.co.uk/other/temp/Screen%20shot%202013-01-22%20at%2023.06.52.jpg you can see how much better the upper part (PS) image is

  Thank you

  Mike

  This, again, I have the impression is a problem with the monitor profile, and a new calibration is in order.

  Lightroom and Photoshop must display like any profile you send to Photoshop. They are both fully color managed and will convert any profile of the source on the appropriate monitor profile. In Lightroom, the source profile is its internal workspace (linear Prophoto), in Photoshop everything you set in Lr preferences under external editing.

  In this case the PS version is obviously good. But if the monitor profile has a problem may arise in different ways in different applications.

• The monitor loses signal after some time

  During the installation of windows vista, the monitor would lose the signal after some time (the screen turns black and does not) while the computer is still on.  I am currently using ATI radeon hd 5750 and I tried to connect two monitors to the video card and it wouldn't work (both monitors loser of the signal)

  Hi PaulYea,

  1. what type of Installation are you trying? It's an upgrade or clean Installtion?

  2. what happens when you connect to the system now?

  If you attempt an upgrade installation, then try the update the video card drivers and check:

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  You can also check out the link to the manufacturer to download the drivers:

  http://support.AMD.com/us/psearch/pages/psearch.aspx?type=2.4.1&product=2.4.1.3.43&ContentType=GPU+download+detail&OSType=Windows+Vista+-+32-bit+Edition&keywords=&items=20

  You can also try running Upgrade Advisor and start the upgrade installation

  Check out the link:

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Note: This also applies to Vista.

  For more information, see the link:

  Solving Windows installation problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Windows-installation-problems

  Hope this information is useful.