Satellite L300 - Windows does not load

Similar Questions

• Satellite L300 - Windows does not recognize the connected device

  I have Toshiba Satellite L300 series, PSLB8E. It came with a basic version of vista pre-installed window and it was working fine until I decided to update.

  I took it to a computer for an upgrade store to ultimate window.
  This version worked very well for a few weeks until I have received a message on the screen that says: 'I have to get a genuine copy of windows.

  Because ever since I started having problems with my usb ports, my computer couldn't detect something I connect to it (usb, printer, mouse, etc.) he worked with modem only, sometimes it would open my external hard drive but it does not have its drivers.

  I then decided to buy a window 7 home base, but instead of this problem will disappear, that it got worse as my usb ports completely stopped working.

  I tried all the stuff I can think, but nothing has worked. the problem I have is that I don't have the original disc in Windows vista

  Someone please help!

  I agree: installing drivers for Windows 7 is very important to get all devices work correctly. Windows 7 is much better than Vista OS and I don't see any reasons why your L300 Sat should not work properly with this Win 7 OS.

  I recommend you to install the Windows 7 system again by install completely clean.
  After that, download all drivers Toshiba Win 7 of the Toshiba UE driver page.

  Very important are the drivers as value added package, Chip Set Utility, card reader controller, display driver, LAN driver, WLan, Sound Driver, Storage Manager and driver of the touchpad

• Satellite L300-1AS does not load

  Hello

  My laptop has stopped to load the other day, it should Flash it then recharges after that I have nothing! I tried pushing it with a little force it should blink. But now, nothing happens. It's very frustrating. The power supply had been pressed. So I opened the laptop and tried to open. Nothing.

  So I decided to make a new power supply replacement on Ebay. It fit perfectly, it seemed that it would work. But yet again, nothing happens! I have no battery, no lights light up! Same as before, but now with a new power supply.

  Help?

  Thank you
  Dev

  Hey Buddy,

  First before you start a lengthy discussion, what laptop you have exactly?

  You can start with AC/DC adapter only?

  Otherwise I think that it s a hardware malfunction and therefore, you should contact a service provider for help.

• Satellite A215 S6816 won't mode BIOS and Windows does not load

  Hello

  I'm helping a friend to determine what the problem could be on his laptop satellite A215 - S6816 Windows does not load on start up and it says "press F2 for Setup, press F12 for the boot device selection menu" but niether one of these options works no matter what I do.

  I tried them on start up but nothing happens. It will be not just to enter mode BIOS or the menu. It will say please wait or entering the menue, but yet again, nothing happens.
  What else can I try to enter the menu, either to get the system to get windows to load? This could be a motherboard problem? Hard drive problem?

  Thanks in advance.

  Hello

  If you are unable to access the BIOS, or to load the Windows operating system, and then a serious hardware problem is present.
  Eventually he s a motherboard related question that means it could be a faulty motherboard or just a small part of the motherboard as a ROM chip for example.
  I doubt this can be fixed without help the ASP.

  There is thus only one real solution. go to ASP. Guys must verify the simple parts to determine what part is affected.

  Good luck

• Acer Aspire 5610Z Windows does not load... No recovery cd

  I have an Acer Aspire 5610Z Windows does not load, when I use the F10 it comes up says:

  Modify the Windows boot option for: Microsoft Windows Vista

  Path: \windows\system32\winload.exe

  Score: 1

  Drive hard b44bb44b

  [/ noexecute = optin]

  That do I don't know...

  Thank you

  "When I start the laptop, 1 screen 2 times, beebs gives me the whats available in the computer, Press (F1) to resume, or (F2) of the installation.

  I wish that you mentioned the "beeps" in your original question.

  When you start a computer, you will receive a 'beep', which indicates that the motherboard has spent his own self (POST tests. Power on self test))

  'beeps' (plural) normally indicate a hardware problem.

  Read the Information on the links about different codes "beep":

  http://www.computerhope.com/beep.htm

  http://www.pchell.com/hardware/beepcodes.shtml

  Contact the Acer Support if under warranty.

  http://support.Acer.com/us/en/default.aspx

  If it is not under warranty, contact a repair shop, local.

  See you soon.

• Satellite L300 laptop will not load Windows

  I have a model of Satellite L300 number PSLB0A - 00L 022 running windows Vista.

  The problem is that it does not load Windows. It starts ok and I can access the boot manager and the Setup utility and that's it. It stops just loading.
  After studying the problem, I ran a car aptitude test and the result was the error code 0 x 70. After looking at the code I m under the impression that I need to erase the disc. I have no problem with that.

  My question is - if I run the windows Recovery Wizard will be it solve my problem? I will have to re install vista at all? All advice is appreciated!

  Hello Jane and welcome in the Toshiba forum

  After reading your ad, I must say that the best solution and easier for you is to reinstall the operating system via original Toshiba recovery DVD. This DVD contains the operating system, all necessary drivers, specific Toshiba and utility tools. After recovery image installation you will get state out-of-box and clean the preinstalled operating system.

  Yes, this should solve your problem. Please note: when you do it all saved data will be deleted.

  You have some important data saved on your laptop?
  Do not use this disc reinstall Vista and everything should be ok again.

• Satellite P300-28th does not start - windows does not load

  I bought Toshiba P300 28th last week. I spent Vista business successfully in Windows XP Professional with provided Toshiba DVD. Update Windows with Windows Update. After 3 days, laptop turns off suddenly, and because Windows does not start, it in fact does not start.

  When I press the power button / stop, it turns on, shows "Toshiba Leading Innovation" logo image option and "2", "press 12...", and it hangs and stops.
  I tried pressing F2 and F12, nothing happened.

  I can not access the boot menu.

  I put the Toshiba Recovery CD, the hard drive does not work. Recovery disk does not start, despite earlier I remember put boot CD/DVD at the forefront in the Boot Options to Boot Menu.

  I checked everything, power cable, took the battery in and replace after 3 hours, tried to turn on the portable power, without battery cable. Did not help.

  Don't know what to do?

  Your help is very appreciated.

  Hello Fiona

  If you are unable to enter the BIOS (F2) at startup settings there must be some serious hardware problem.
  I recommend to contact your local dealer where you bought this laptop and ask for help, or you can contact Toshiba service provider directly.

  What you have tried to do is good but if laptop doesn t allow you to enter parameters of the BIOS something wrong here, and you need professional help.

• Windows does not load on a Satellite A350 with 500 GB Seagate external HARD drive

  There is a problem with this laptop, A350-043 running Vista Edition Windows Home Premium 64 bit, part number: PSAL6C - 04S 015

  In other words: when it is connected to a 9NK2AL-510 SEAGATE 500 GB SATA DRIVE EXTERNAL USB (s/n: 5QG1YH1E) Windows will not load, it will up to and gel just before the green movement of the bar. If the USB cable is released and handed over in a second, Windows continues to load normally and all is well.

  Otherwise, the operating system will have up to 15 minutes to load. Looking in the BIOS features, there is no option to boot from USB available, so it can not be disabled. I have updated the BIOS of Toshiba to the latest version without any change in this issue.

  I tested and confirmed that the problem persists no matter what USB port is used.
  The external drive is fully functional, and there is no error or problems with it loading Windows. I reported this problem to Seagate so that Toshiba in the hope that a solution can be offered on this, but has not heard back on anything either yet.

  Do you mean that the laptop needs 15 minutes to load the Windows operating system, even if the external HARD disk is not connected?
  It sounds weird, and I doubt that this can be related to any software problem

  First of all, you should check the boot order in the BIOS the USB should be set at the last or last position.
  Second, you should check if the same problem persists even after a fresh install of the OS in some cases, that the start-up procedure could be affected due to the process software and installed background.

  But if the new installation of the operating system is not enough and if the issue persists then I guess a hardware problem (motherboard?) could be the reason for that and, therefore, a technician of the laptop must be contacted!

  That s in my opinion

• Satellite Pro A200 does not load if current enforcement

  Hello

  I have a new Toshiba Satellite Pro A200 on Vista. I have a problem with the power adapter and charge socket.
  It will start and run very well and when turned off will charge the battery of fine food. But when running, the machine automatically runs battery, no network and does not load.

  This means that the battery is sinking and ended up to be recharged so just off the coast.
  When the power supply is removed and then reinserted, it will load for maybe 30 seconds, then stops to load again initially and continues to run on battery.
  At the same time, the blue light of indication on the front of the machine lights up to indicate that the ESA is connected and detected, and on battery defiler on windows in States ' ac connected, not charging battery "-in other words it works of ac and is detected but the machine isn't use to run power supply or load unless it is turned off...

  Can anyone offer a solution?

  Thank you

  That s very strange and I guess that this problem could be linked to the hardware problem.
  Either it's a defective battery or there is something wrong with the electronic power supply on the motherboard.
  In my opinion, there is only one way to know what's wrong some diagnostic tests are needed.
  This test can be performed by a technician of the ASP.
  That is why it s advisable to contact an ASP in your country for audits.

  This is a new laptop and warranty should cover everything!

• Satellite C650 - Windows does not start correctly

  I have a Satellite C650, who does not start, when it lights there are two options, Startup Repair launch which leads to a black screen and mobile arrow, the screen remains like that until you turn it off the button stop (seriously ive left for about 10 hours). The other option is to start windows normally resulting in a blue screen and the laptop restarts itself.

  Help me please, make things worse I can't find the box that it came in which contains the guarantee and recovery disc

  Hey Buddy,

  You can start your laptop in safe mode? This means that if you press the F8 key before Windows starts and you choose Safe mode can you start Windows?

  If this isn't the case I think that it s something wrong with your Windows installation and that's why you need to use the Toshiba Recovery disk to restore to factory settings.

• Satellite A300 PSAG8E does not load

  I have a Toshiba Satalite A300 PSAG8E, which does not load.
  I was given a few days ago by a person stating that he is not working or light - vague details.

  At the reception that he turned on, asked to start windows normally or not, then started absolutely perfect, it powered by the charger, no problem.

  I let him on during some time different tasks.
  I came to him a few days later to find that he had himself set to off.

  I enabled again, how he asked to start windows normally or not. I started normally, and it came on the property.
  Since then I could not to power it on the sector.

  Why not load it now?

  Hi mate

  > Since I could not to power it on the sector.
  > Why didn't he care now?

  I m a bit but confused. What's wrong now? You are not able to feed the device or battery is not charging?

  If you are not able to turn on the unit, then you should try this:
  -Disconnect the battery and AC adapter
  -wait a while (2-3 hours)
  -connect the two parties to laptop and check again

  If your battery does not load:
  Try to update the BIOS and set its default value
  If that does not help, then the battery should be checked
  If the new battery does not solve the problem, then the motherboard must be checked and replaced if necessary.

• When I start my computer I saw a MSI logo and then the screen goes black and Windows does not load.

  original title: HELP ME PLEASE!

  (I am running windows xp) I need help! I tried installin linux ubuntu for netbook 10 on my msi u100, but everything was wrong when my little brother from my FlashDrive from the port, it has been installin linux from. so now when I turn on my computer it will not load windows, it will just have the msi logo and then the screen goes black and it does not load windows xp.

  Netbooks and also most computers these days, do not come with an installation CD. Instead, it has a recovery partition. Assuming that you have not deleted the recovery partition,

  Take a look at this:

  http://randompastime.blogspot.com/2010/02/restoring-MSI-wind-U100-NetBook-to.html

  Hope this helps

  Post back if necessary

  __________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows does not load and displays a black screen when it is connected to the power supply

  Original title - Windows Vista running on my laptop Sony VAIO

  Trying to turn on my laptop using the built in battery nothing happens.  When the laptop is connected to the power supply and turned on Windows does not.  It shows something in the sense that it does not properly off.  It tries to load back to a system restore point before the last stop, but seems to fail again during this process.  All that is displayed is a black screen. Currently the power on light is on, the battery light is on, but the drive activity light is off.

  Yet once again, I switched on the laptop and finally the Startup Repair process is automatically called.  After the display of the bar to attempt repairs, the system has been repaired successfully.  As a result, the I ran my Norton anti-virus, followed by Windows Updatesoftware.

• Windows does not load upward

  My laptop charge, allows to enter my user passsword then everything freezes, it does not load in normal or safe modes,

  I really need to take my registered work it. #

  any suggestions?

  Post edited by: Aaronpjohn02

  Remove the HARD drive and connect it to the PC and others as external one. I hope that you will have access to all the data there.
  Sorry, but if the laptop doesn't start in safe mode I see this as last option.

• Satellite A300-288 does not load the operating system

  Hello everyone.

  Today I turned on my laptop A300 and does not load the operating system. In other words, Toshiba logo appears, the message "Press F2 to enter SETUP", but not in continuity with the boot. Yesterday it worked and did not update the BIOS or something else.

  Someone has an idea? I deleted a both SDRAM and vice versa, to check that the problem wasn't RAM, but no. There is no beep. LED touch 'NumLock' and other, power on and off when I have impulses, so the keyboard responding but by pressing F2 or F12 does nothing.

  Thank you very much for your help.

  Start your laptop with F8 and test if you can start the operating system in safe mode.