Windows 7 on DV6-1215SA

Similar Questions

• Pavilion dv6-1215sa screen

  The screen of my HP Pavilion Entertainment PC (Pavilion dv6-1215sa) is cracked. Wanted to order, but I was told of the screen is of two types. Please how to know the type of screen or reference number? Thank you.

  By far, the best way is to simply go ahead and open the housing of the display, remove the existing screen and look at the back of the part number. You will have to remove, in any case. Order the replacement based on the screen manufacturer part number, not the number of the mobile phone model and you will expand your choices and probably find a better price on the replacement.

  Here is the Manual:

  Manual

  This youtube video should be useful:

  http://www.YouTube.com/watch?v=5FDyI-CL7eA

• drivers for windows 7 envy dv6 7210us

  I got my laptop HP dv6-7210us for windows 7 ultimate 64 envy. I have everything works except the SM bus controller and and 2 usb controllers I looked in Device Manager and does not give me much information they are devices on the pci bus hope you can help me with drivers.

  Thanks, fred

  Hello

  Download and install the Chipset driver from the following link.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207

  Kind regards

  DP - K

• NEED DRIVER WINDOWS 8 3000 dv6 6770 m / intel

  Hi, I need a video driver for my

  HP Pavilion dv6-6150sl

  WINDOWS 8

  He has one (ATI 2 gb 6770 m/Intel 3000HD) combination.

  I have tried virtually all the drivers I can find and nothing has worked for me, when hp bring this 8 out windows driver! everyone seems to have the drivers for windows 8 for people to use...

  I tried leshcat drivers, drivers windows 7, no chance, no chance. I can't use my ati card at all, I'm stuck with my intel 3000 which is good enough to use windows itself, but I can not play games and movies 1080 p! Worked perfectly on windows 7:/

  All the help and I will be extremely grateful!

• Cannot change my brightness of the monitor on windows 8.1 DV6

  Hi all

  my note book brightness controls do not work since I upgraded my machine to windows 8.1

  Product name: HP Pavilion dv6 Notebook PC

  8.1 pro 64-bit of Windows

  Product number: A7P25EA #ABV

  Display driver: AMD Radeon HD 6700 M Series and Intel HD Graphics 3000

  AMD Driver version: 14.100.0.0 (17/04/2014)

  Intel driver version: 9.0.0.0 (15/08/2012)

  I started using my laptop on a slightly darker room in the last few days and now its me gives headaches because I can't reduce the brightness.  Any support is much apprreciate

  See you soon

  Kzl

  
  

• I installed windows 8 on dv6-6023tx. HP support Assistant does not work.

  I installed currently windows 8 on my dv6-6023tx, there seems to be a problem with my hp support assistant and there is also an error message saying pc questions firewalla nd spyware does not (I have norton 360).

  Please download the latest HP Support Assistant compatible with Windows 8 from following link:

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58915.exe

  Please provide the full error message.

• Damages and errors: need to recover Windows 7 on dv6-3231nr

  Hello people! Hoping I can get some tips for fixing this laptop - it is a mess!

  I have a laptop dv6-3231nr out of warranty and has a damaged screen. Has been trampled or abandoned. Damage at the bottom left of the screen. I can do some things on the screen when it is running.

  Unforunately it will not display the video on an external monitor using the VGA connection. I also tried the HDMI to view video on my TV and the TV displays the data of 'recovery' as it new, something has been connected, but he could not show the video using this connection as well.

  Laptop starts at the BIOS and the test in BIOS hard drive error checking was able to finish even if I couldn't see what options and errors I had (all I could do was what he finished). Windows does not load and I get a blue screen error message with an error code that I can't completely make out because of damage to the screen and restarting the laptop just after error appears.

  I don't have the original Windows HP recovery disk. I know I could probably order from HP, but I did not how much they cost. I couldn't find a link to order.

  So, what do you think? The laptop likely there internal damage to the motherboard that prevents it from display external video via VGA/HDMI connections or would that be a software problem that would be fixed if I had to recover the operating system? In addition, how the HP Recovery/Windows 7 disc would cost me?

  Thanks in advance for your help.

  You can order your software/driver page HERE recovery media they are usually around $17.

  You can also try the hard drive partition recovery tapping away to the F11 key, immediately after switching on. Not sure if you could get through the options here with visibility of the small screen.

  You can also try the trick HERE by DavidPK burn a dvd of Windows 7. Yet once not sure how well would mean you through a facility complete with retail disk and damaged screen.

• DV6-6c40ca: more than 100 seconds to boot Windows 7 on dv6-6c40ca

  My laptop takes more than 100 seconds to start. It is extremely slow.

  I tried all the latest drivers, reinstall windows, upgrade to 240 GB Intel SSD, dsabling software such as antoviruses, and nothing does not.

  I tried the chipset driver:

  Radeon-Crimson-15.12-SB-SATA-AHCI-win10-WIN8.1-Win7-64bit.exe

  but it did not help.

  I get my measurements from the windows of the values of diagnostic performance in Event Viewer. There is no device in my device manager.

  Can anyone help? I would like to know what the last driver from chipset more up-to-date for this laptop to be used.

  BIOS version is F.1C according to HP Support Assistant software. This would be the wrong version?

  I checked the Task Manager frequently and there is no CPU hogs.

  I checked the Device Manager and there are no missing drivers.

  Here's what I discovered. After that uninstall all non updated security windows, my boot time fell to about 35 seconds. I reinstalled the updates in a group of 5, rebooted twice and checked the performance disk to windows Event Viewer log. It was my metric.

  After you have reinstalled all of the updates, my boot time hovered between 25 and 35 seconds.

  What I think has happened, is that if you install both too many updates, something goes wrong. I think that the only solution that I can gather from this is that with some computers, you must install the windows updates in smaller batches. I did have this problem on other computers well. SO there you have it, one more turn to try for everyone that this reading of google searches.

• network controller drivers windows 7, pavilion dv6-6100ax

  I got a HD fail and have had to replace it with another.

  I can also find oem supplied with the laptop recovery disks.

  Managed to install Windows 7 Edition home premium and update all the drivers except one!

  in Device Manager it arrives as a controller network in other devices, said location is bus PCI 3, device 0, function 0

  I went through all the drivers on the HP site and none have contributed to this issue.

  I can't connect to a network or the internet with it atm due to this driver. Using another laptop to download the drivers and research, etc.

  Any advice or assistance would be greatly appreciated.

  Hello:

  My understanding is that your PC comes with a Broadcom wireless network adapter.

  Here is the link for the driver you need for this card.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en

• Fan cooling 90 b on Windows 7 Pavilion dv6-3225dx error

  Hi, I have a HP Pavilion dv6-3225dx, winddws 7 64 bit laptop for over a year and I started to receive a black screen at startup which said cooling fan error 90 b problem.

  The problem started when I was still at school and I had to watch this long movie for an assignment.

  The error would only be the beginning on all 2-3 weeks or so, one or two times, and especially when I turn it night and turn it on again 12 hours the next day later. I tried to update the BIOs from HP support assistant menu, but twice the update failed once it restarts after a update.

  When the laptop starts it starts smoothly without problem, and the fan does not strong when the error screen appears.

  A friend told me it might be dusty inside the fan or the fan needs to be replaced. But I thought I'd ask around on the forum to see if anyone has a solution (maybe something is not installed?)

  the BIO system version is F.29

  Thank you!

  Hello:

  Your friend is correct.

  I would try cleaning first cooling system since it is the best thing to do.

  Unplug the computer and remove the battery.

  Get a can of compressed air at your local office supply store.

  Put a toothpick in the air intake fan and place it between two of the fan so the fan blades don't pinwheel when you spray compressed air, as setting the fan will ruin the bearings.

  Spray the air in two ways - through the socket of the fan and the exhaust fan vents. Do a couple of times until you see no more than dust coming out ducts.

  Failure to remedy the problem then maybe the fan/radiator Assembly will be replaced.

  Looking at the specifications of product for your laptop, it seems that the Fan/Heatsink Assembly you need is

  603690 001.

  Consult the service manual, Chapter 3, page 21 for more information and Chapter 4 for the procedures for removal and replacement.

  http://h10032.www1.HP.com/CTG/manual/c02657339.PDF

• Win 7 (32 bit) Windows Driver HP DV6 - Nr LV837PA #AB4

  Hello

  I have a HP DV6 that was purchased in 2011. However, I misplaced the recovery disc I made and my current HARD drive crash. After you install a new Win7 Home Prem (32 bit), he is invited for a new drivers.

  Grateful if you can give me the link to download the drivers.

  My Dv6 info are here

  HP Pavilion Dv6 Notebook PC

  No. LV837PA #AB4

  Serial number 5CH12014WA

  The system board ID: 1657

  Processor type: Intel Core i-7-2630WM CPU @2.00

  WLAN FCC IDD911230BNHU

  Bluetooth FCC ID: PD911230BNHU

  Hello:

  I tried and here is the link to the page of the driver W7 32-bit for your model...

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=5100596

• USB 3.0 ports will not be detected / working after fresh Windows 7 install (dv6-6184)

  I'm sure that I don't have the right drivers. I installed the Renesas drivers from the HP download page, but they do not solve the issue (so I uninstalled them). Could someone please tell me the right drivers?

  Thank you!

  Hello:

  You want the first file on the page... one who is 53 MB.

• ENVY DV6-7203TU: I lost my original windows, how can I recover?

  Hello
  I bought the hp laptop with windows 8, ENVY DV6-7203TU original,.
  Recently, I had the problem of the usb, I went to the computer repair shop, he removed my original windows and reinstalled some windows 8.1.
  My original genuine windows was 8 which I later upgraded to windows 8.1 is deleted, I have a few new windows installed 8.1 now not on my name, he has also deleted my recovery partition, but somehow, I could find a screenshot of my old genuine cd key and my name on which it is registered.
  
  Now I have the cd - key,
  But when I try to install through windows 8/8.1 installation programs, it says bad cd - key for version retailer etc.
  
  Can someone help me please how can I reinstall my windows genuine 8, if I have the cd key, where can I download the installer of windows 8 oem? where my cd key is considered valid.

  Microsoft has a site where you can download the ISO of Win8.1 images - but it cannot be used for OEM versions - which is what you have.

  Any PC tech with an ounce of intelligence knows that an OEM machine comes preinstalled with an OEM version. So I should be surprised by the huge incompetence of the shop where they "fixed" your PC - but I'm not!  Seems these days, anyone who can be synonymous with PC can open a repair shop - and incalculable damage as a result.

  You have to contact HP for recovery media.  (Very likely), you will have to pay for it, and it is usually about $30 USD - but yours could be different.

  You then starts from (it's probably a DVD or several CDs) and will be reformatted your hard drive, and the operating system reinstalled from scratch with all HP programs and utilities.  Then, you should see what you can do on the registration files and valuable data before you for the restoration.

• NO sound on the upgrade to windows 8

  Help, I have a Pavilion dv6 1215sa (NZ851EA product number and I stupidly upgraded to windows 8 and now I have no sound. looks like what he is sound-all that think it is ok, but just no sound.)

  Windows have looked at my PC and told me to contact HP, and I'm going along in circles.

  Help I want a rear working laptop

  Cloud_Strider wrote:

  @soupy1972,.

  It seems that this device does not support Windows 8 based on the software page and drivers found here.  This means that a driver must be installed for Windows 8 or a driver of Windows 7 in compatibility mode.

  This process has worked for some to find an original driver of Windows 8.

  Otherwise, the Windows 7 driver should be installed in mode of compatibility as shown here.

  ---------------------------------------------------------------------------------------------

  @dc57,.

  I assume that you have the same problem, but for Windows 7 instead.

  It looks like this device might have Realtek or Conexant to the provider of the sound card.

  Visit this page and download the audio driver appropriate.  Download on the system, but do not install it again.

  Browse to the downloaded file.  Run the file and let the complete extraction of the process.  Note where the package was extracted to and cancel the installation, once you have the opportunity.

  Go to the extracted folder (usually c:\swsetup\filename).  Right-click on the setup.exe or Setup for audio driver and select Properties.  Select the Compatibility tab and select compatibility for Vista.  Some users have success by selecting XP on this property window.

  Click apply/ok, and then run setup.exe.

  This should install the audio driver in compatibility mode and give the best chance of success.

  Let me know what happens.

  Thank you very much! It worked! I get a refund for Windows 8, but realize that I couldn't reinstall Windows 7, so am not stuck with a BONE that I don't don't like, but now, thanks to the advice have sound!

• Pavilion dv6-2131el: cant find A309 lack driver pavilion dv6-2131el

  Hello I'm always hawing trouble when reinstalling windows on my dv6-2131el with the search for all drivers.

  Now, I have installed nearly all the drivers almost all of hp.com cos I don't need them all the fingerprints of exp. unlock I didn't need cos I don't haw as hardver instaled on my machine and why is it there yet for me to download when my machine does not have a nwm tho.

  IM houzi to Device Manager is a missing driver named A309 Hardware ID:

  USB\VID_07CA & PID_A309 & REV_0200
  USB\VID_07CA & PID_A309

  If you help me please how resolwe it cos I downloaded it and installed all the drivers from hp.com I also need to use 3DP Chip to install chipset driver intel cos of the hp.com istall wont completely don't know why also.

  and maybe im hawing trouble you can help me on this one too. the habit of my laptop reboot, shutdown, when it off on mode 'sleep' with screen may not wake him and I also tried when reinstalling windows after formatted HARD drive pump and install frash new windows, when the part comes in that needs to be restarted in order to complete the windows instalation does it several times (reboot) every time I need to get out the power cable so it turned off and start him again if he resume the installation. so in all my computer wont stop completely, he can go by his own to shutingdown until the part whne go black screen but the back light is still on as small turned on and he does will not entirely off idk why please help me on this one here. And I tried to pull on the keyboard, touchpad, usb ports, electrical panel of motherboard then I turn and I try to restart or to stop it will not completely disabled... help

  Hello:

  The hardware ID you posted is present in this driver... that this driver is the only one I know.

  [AVerMedia.NTamd64]
  %AVerAF15.DeviceDesc.A309% = AVerAF15.Device, USB\VID_07CA & PID_A309

  See if it works... Download and install this free utility for files.  2nd listed file is 64-bit.

  http://www.7-zip.org/

  After installing 7 - zip, download, save, but do not run the driver file I posted again.

  Right-click on sp45500 and select 7 - zip from the list.

  Have 7-zip extract of: and leave it to decompress the file in its folder.

  Now, once 7-Zip has done this, right click on the A316A, the etc file and run 7 - zip to decompress this file in its folder.

  Then open that folder and right click on the A309_Win7Logo, etc., drop and have extracted 7 - zip this file in a folder.

  Then, open this folder and open the OUTDIR folder and open the folder to Vista x 64.

  Again, do a right click on the Setup file and have 7 - Zip to decompress this file in its folder.

  Now that you have finished with this...

  Go to Device Manager and click on the device USB\VID_07CA & PID_A309, who need the pilot.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and browse to the file sp45500 that 7-Zip created.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart the PC.