Windows 7 screen fades then goes black, if I touch the touchpad, it turns on, but is once again in 4 minutes?

Similar Questions

• When I open any image in photoshop, it is completely black? When I move the image window it apears and then goes black again. Any help?

  Any help?

  I changed the amount of memory in preferences, performance, which solved!

• Computer laptop HP dv8t-1100, the display lights for thiry seconds about then goes black.

  I have a laptop HP dv8t-1100, the screen lights for thiry seconds approximately and then goes black, I can close the screen and quickly open it up and the screen comes back on?  This is my wife's computer and its in this perpetual loop.  Installed 2nd monitor and it works perfectly, never turns off (unless I turn it off).  I really hope you can help.

  Hello

  1. can you try updating the graphics driver to the latest version?

  For your machine, it is SP51290.

  FTP://ftp.HP.com/pub/SoftPaq/sp51001-51500/sp51290.exe

  2. can you try updating the bios to the latest version?

  For your machine, it is SP49106.
      http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-84660-1&cc=us&DLC=en&LC=en&OS=4063&product=4121367&sw_lang=

• On Windows 7, the screen flashes and goes black. It shows that the display driver has stopped working

  I have premium home edition of windows 7 I had a problem with my display driver. The screen flashes and goes black and then turns back on with a message in the bottom right of the screen that reads «display driver stopped responding, but recovered» It has also closed and restarted windows

  Hello

  First, download and install the drivers from the ATI site, if you have already done so, check the graphics card and cabin temperature by opening. This normally occurs when the temperature is too high. Or if a person has overclocked graphics card.

  Thank you

  Nitin Aswani

• Satellite A100-999 - screen flickers and goes black

  Hi, I have a problem with my Satellite A100-999.

  The screen flickers and then goes black. The works still laptop as I can connect to external monitors, but the laptop monitor are almost entirely black. It's happened before, but a reboot seemed to solve, however, Noah, as soon as the sign of the intel appears at startup, the screen turns off. It is not completely black - you can see the contours of some things on the screen, but it is almost completely black.

  Thanks for your help.

  Hi xiuxiuejar_1,

  HM, if you can still see a picture on the laptop external monitor should be ok and it must be a problem with built-in LCD screen.

  Usually, if the display is it black malfunction in UPS s FL which controls the backlight of the screen, but if the screen flickers, it s the internal LCD display itself

  I guess that your laptop is not under warranty more so I would try exchanging the FL inverter it's a lot cheaper. You can order this FL inverter of an ASP or eBay but is not so easy to replace, because you have to disassemble the laptop monitor.

• Restart computer, windows xp screen came then the screen turned white

  Restart computer, windows xp screen came then the screen turned white

  Hello

  1. have you made changes on the computer recently?
  2. do you get an error at startup of the computer?

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

• Is it possible to put in place a wake-up call to the PC/computer Windows Vista laptop? Then, he can wake up in the morning.

  Is it possible to put in place a wake-up call to the PC/computer Windows Vista laptop? Then, he can wake up in the morning.

  Hello Xltdnbl,

  Thank you for using the Microsoft Windows Vista Forums.  In Windows Vista, there is not a revival on the operating system, but you can add a.  The site below has different types of alarms that can be added.  You can set the alarm to wake up with the sidebar.

  http://Gallery.live.com/liveItemDetail.aspx?Li=354455a7-0b97-42d7-adb1-09aeebee0c46&BT=1

  Please let me know if this was helpful, or if you're still having problems. Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• When starting, my windows xp hangs or crashes when you try to load 'personal settings '. I can't do something, but stop once again on commissioning, she repeats the same actions.

  When starting, my windows xp hangs or crashes when you try to load 'personal settings '. I can't do something, but stop once again on commissioning, she repeats the same actions. What now? Thank you

  Hello

  Disconnect all external devices from the computer and try to restart the computer and check what is happening.

   

  Step 1:

  Try to boot to the desktop in safe mode and check what is happening. Only basic files and drivers needed to run Windows are started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. To start in safe mode follow the link.

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you are able to boot to the desktop in Mode safe, it means that the third-party application prevents the computer from starting in normal mode. To check you can configure the computer to clean start State and then try to boot into normal mode and check what is happening. To set up its own start-up follow the link below.

  http://support.Microsoft.com/kb/310353

  If the problem does not continues when the computer is in the clean start State follow the steps listed to identify which application is causing the problem.

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I install Windows Media Player 11 on Dell Dim/3000, I received the message to turn the system restore. How do I do that? Turn on SR, where is the button?

  I install Windows Media Player 11 on Dell Dim/3000, I received the message to turn the system restore. How do I do that?  Turn on SR, where is the button?  How can I enable the system restore?  I want to install Window Media Player 11 and this is the message I received. WMP 11 I need to re install and everything about the need to restore the system to have anyting to install?  I need HELP as soon as POSSIBLE. I'll wait for a response.  I can't play all the music that I recently downloaded.

  I received the message that the system restore is disabled.  How do I turn it on, turn so I can install WMP 11 new or I need to reinstall the latest version of WMP11 again?  Help ASAP, I'll wait for a response.

  Hi AnnieStewart,

  1. What happens when you try to listen to music downloaded in Windows media player 11?
  2. What is the complete error message you receive when installing Windows media player 11?

  See the articles to turn on system restore on the computer.

  How to turn on and off on system restore in Windows XP

  http://support.Microsoft.com/kb/310405

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

• Window 7: Screen fades to black

  My computer is a laptop ASUS with Intel (r) Core i7-2630QM CPU @ 2.00GHz 2.00 GHz

  12.0 GB of RAM

  64-bit operating system

  And of course, running Windows 7.

  Well, then, I have a problem where my screen turns black.

  The computer does not turn off and none of the programs stop working, because I can still hear the audio of them continuing to play, but I can't ctrl + alt + del, tab, or prevent it from happening, I have to do a manual valve to the bottom of the computer. Once or twice it is simply cut to black, but most of the time it fades just for her.

  Then, sometimes, it will start to fade to black, then reduced, but then melted in the black again and stay that way. (Makes Me think THAT it is a screen saver, power booking glitch, but I checked that already, but if you have any other suggestions for this, far to offer).

  It is melted unrelated my battery or power cards, since I already have the game forever when you don't use, etc.

  I thought it had something to do with the graphics card with playing the games, as it is when it first, maybe burn, but it happens when I'm just on the desktop or on the internet too. It seems to be completely random.

  As a potential note which may have caused the it, which I doubt, but he started to happened after I did so it is possible, having had this laptop for almost two years I finally undid the bottom of things to clean dust (there a lot, kind of a surprise, it didn't ignite at any given time.)

  I used a computer dust spray, did not move anything about this, didn't remove anything, I just dusted. Made sure everything was in order and he has closed.

  Other then that, I have NO IDEA what could be causing this.

  Help would be VERY appreciated.

  Hello Pierre,.

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with the black screen of discoloration in the computer.

  I would like to know some more information on this issue to help you better.

  (1) you get an error message while, the screen fades black?

  (2) the particular bland black while, to access the screen application?

  In the meantime, please follow the following suggestions to solve the problem.

  Method 1: You can try to check the below suggestions to shut down the computer.

  Turn off a computer: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/turn-off-computer-FAQ#1TC=Windows-7

  Method 2: If the above does not help then, try to follow the link below to change the power management and see if that helps.

  Change, create, or delete a power plan (scheme)

  http://Windows.Microsoft.com/is-is/Windows/change-create-delete-power-plan-scheme#1TC=Windows-7

  Also refer to:

  Power plans: daycare TLY asked

  http://Windows.Microsoft.com/en-us/Windows/power-plans-FAQ#1TC=Windows-7

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Registry backup
  http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• Splash screen goes to apple then goes black

  I have not used my macbook air 13 "mid-2011 for a while. (It had been set aside, but I finally found it.) I tried to turn it on once it has been reloaded, but I get a grey screen showing the Apple but then I see a glimmer of a line underneath and then it goes black. Is there something I can do?

  It had not last updated the last few systems that I needed to remove stuff to make enough space.

  Fix the charger on the MBA.  Does the LED light up?

  If so, reset the SMC and the NVRAM:

  https://support.Apple.com/en-us/HT201295

  https://support.Apple.com/en-us/HT204063

  Try a safe boot:

  https://support.Apple.com/en-us/HT201262

  A little luck?

  Ciao.

• Satellite L405D-11V - freezes and the screen goes black when you watch the video

  OK, so I have the Toshiba Satellite L405D-11V, I had a breakdown, basically, the computer freezes at any time and the screen would go black, with the fan and lights still ongoing, this could be at the start, or a few hours using the laptop, so I decided to ring Toshiba technology support and they arranged for my laptop to collect and be expelled for repairs.

  I was able to track repairs online via the tracking service and was able to see what they were doing to my laptop, he said that they have ordered a part, it was underway and the repairs are completed.

  However, I got the laptop back today, I turn it on, all right, I start using the cell phone that everything is fine, so I decide to watch a video on youtube, and it freezes again, so I turned off now pressed the power button, hoping he wasn't that a large, I turn back to and load the video once again it freezes and the screen goes black again, after that whenever I am watching a video or a game, it causes the computer to crash and freeze as before the repairs. So there is always a mistake, but I'm not sure what to do

  Its still under warranty, I bought the laptop from the Comet, but I really don't want to send the laptop for repairs again and find it comes back with the same fault, is it interesting sending distributed, maybe see if the comet will replace the laptop as its still less than a year to buy the laptop, or it'll just be useful to save all the hassle and buy a new laptop? If this fault happened to someone else, I could use you some help, and if someone could shed some light regarding what could be bad?

  Thank you

  Hey Buddy,

  You changed something on the configuration after you got your notebook back from repair? You update a driver, or something else?
  What operating system you use on your L405D satellite?

  To be honest it is really hard to say why it happens because technicians test to check if your laptop is running correctly.

  In my opinion you should try to update the display driver. Maybe it's the origin of the problem of s
  If this isn't the case, I recommend installing Windows from Toshiba Recovery disk to restore to factory settings. These parameters are pre-tested by Toshiba and should work.

  If you still have the problem, you must contact the technicians again. I mean you could track the online repair and according to your assignment, everything worked well during repair, so in my opinion he should t be a problem to contact guys exactly.
  Explain your very detailed problem. I think that everything can be clarified then. :)

• Screen goes black when you use the computer - Vista

  Original title: SCREEN GOES BLACK, COMPUTER STILL WORKS. A MESSAGE CAME ON A MIRROR SCREEN, COMPUTER WORKS FINE IN SAFE MODE
  COMPUTER STARTS SOMETIMES, BUT SA SEEMS IF THE NETWORK IS ON THE DISPAY GOES OFF, A MESSAGE CAME ON SCREEN MIRROR, EVERYTHING HAPPENED THIS WEEKEND. DID A FULL VIRUS SCAN, NO PROBLEM, DID SPYBOT AND SOME COOKIES WERE FOUND. vISAT OPERANTING SYSTEM.

  Hello

  If the computer is running in safe mode, then start in safe mode and perform a clean boot to verify if a third party program or service is the cause of the problem.

  Step 1:
  Start your computer in safe modeand try to perform a system restore, safe mode.

  Check out these links for more information about the system restore:
  http://Windows.Microsoft.com/en-us/Windows7/restore-system-files-and-settings  
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Step 2:
  Try to put the system in a clean boot.

  Refer to this article for help:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Steps to perform a clean boot:
  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start your computer in normal mode when you are finished troubleshooting. Followstep 7 of the article mentioned above.

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• screen freezes and goes black

  everything goes well, I can do something on my laptop.untill I stop using the computer and walk 5-10 minutes and then the screen freezes and becomes black. From there I can't hit the power button and start the upward. It becomes really frustrating.

  I have vista Home premium. Please help me.

  Your PC may be incompatible with the mode "Eve":

  1. Open Power Options by clicking on the button start , clicking Control Panel, clicking system and Maintenance and then click Power Options.

  2. On the select a power plan page, click on change settings for the plan under the selected plan.

  3. The parameters of change for the plan of the page, click on change advanced power settings.

  1. Under the Advanced Settings tab, expand sleep, expand sleep after, and then do one of the following:

  2. If you use a laptop, click on battery or plugged in (or both), click the arrow, and then click never.

  • If you are using a desktop computer, click settings, click the arrow and then click never.
                                           de http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-a-computer-frequently-asked-questions

• Satellite U400 monitor starts and then goes black

  At startup and on wake mode "Watch" any spill there usual screens then the screen goes black. Everything can be seen and operated to shine a bright light in the monitor. Everything works perfectly for an external monitor. What could be the problem? How to fix?

  Toshiba Satellite U400 PSU44A-00J00C win XP

  Post edited by: Wildx

  When you use the external monitor and when the OS is fully charged, try to use the FN + F5 key combination to turn on laptop's LCD rear.
  This option is available?
  It work?