WIndows 8 driver_power_state_failure bsod

Similar Questions

• DRIVER_POWER_STATE_FAILURE BSOD when running low on battery and out of hibernation

  I have 13 Duo Sony laptop and Windows 8 gives BSOD when it hibernates after critical battery action and I try to turn it on by connecting the power adapter. I suspect a driver is a problem. Can someone identify the driver from the memory dump?

  Here is the address in the dump file: http://sdrv.ms/18jx5ss

  

  Hello

  The attached file of the DMP is to bug checking DRIVER_POWER_STATE_FAILURE (9f) .

  This bug check indicates that the driver is in an inconsistent or invalid power state.

  By default it is failing pci.sys (NT Plug - and - Play PCI enumerator) that is NOT the real cause and is being blamed by something else.

  If we run one! IRP on the 4th parameter of the bug check (IRP address blocked), we get the following:

  [16, 0] 0 fffffa8007f09060 0 fffff88003826c48 00000000-fffff880009869f0
  ERROR: Module load completed but symbols can be loaded for c:\windows\system32\drivers\sptd.sys
  \Driver\pci dxgkrnl! DpiFdoPowerCompletionRoutine
  Args: 00000000 00000000 00000000 00000003
  > [16, 2] e1 0 fffffa8008dbb040 fffff80247fac830-fffffa8017f3af08 00000000 success error cancel pending
  ERROR: The symbol file is not found.  Defaulted to export symbols for igdkmd64.sys -.
  \Driver\igfx nt! PopRequestCompletion
  
  From the above, we can see three things. For me, it is very problematic and we will address as soon as POSSIBLE. However, the other two are small and may not even be a contributing factor, but let's take care of it without worrying.

  c:\windows\system32\drivers\sptd.sys is pass it through the Direct SCSI host - Daemon Tools (BSOD problems with Win 7 and 8 in particular.

  Remove as soon as POSSIBLE with the uninstaller - http://www.duplexsecure.com/en/downloads

  dxgkrnl.sys is the core of DirectX and works hand in hand with next igdkmd64.sys which is Intel Graphics driver.

  Make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.

  Kind regards

  Patrick

• When I start on windows vista a BSOD appears

  When I start on windows vista a BSOD with error code appears: 0x0000007E (0xC0000005, 0 x 82664872, 0x8CF57A68, 0x8CF57764) I recently downloaded and installed an application and thas when the first crash FAILED: I am running windows Vista 32 bit Ram 4 GB any help?

  If you are unable to Windows, try to go to Mode without fail (quickly press F8 just before the Windows splash screen appears.

  Please provide the following information:

  -Zip please the contents of the directory C:\Windows\Minidump

  -Transfer to the public area of a SkyDrive (https://skydrive.live.com) account

  -Post a link here so we can download it.

  and

  -Go to start and type "msinfo32" and press enter

  -When the utility opens, save a copy of it as an .nfo file and another copy in a txt file.

  -Zip them upward and download them to the Public to a SkyDrive (https://skydrive.live.com) account field

  -Post a link here so we can download it.

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  Use SkyDrive to upload collected files:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  Information contained in your post, I can say is corruption of memory (probably a driver), but I need to say why DMP files?

• Driver_power_state_failure BSOD on Asus UX32VD

  Hello

  I have an Asus UX32VD and in recent weeks, is very long to start (about 5 minutes) and also not getting return of mode standby (nothing comes on the screen, so I have to stop and restart). In addition, almost whenever I start it, I have a message DRIVER_POWER_STATE_FAILURE BSOD.

  I looked around a bit here and it seems that this error comes from a wrong driver but I can't find that one is causing my problem. Here is the link to some of the last minidump files: https://onedrive.live.com/redir?resid=CCF16A0A8A102C22! 130 & authkey =! AMrf3QN-WBV4IRU & ithint = the file % 2crar

  Thanks for your help, I can post more information if necessary.

  Thomas

  TH

  These related iaStorA.sys Intel Matrix Storage Manager driver from Intel Corp.  I remove the current driver and install the latest driver available.

• ASUS UX32VD - DRIVER_POWER_STATE_FAILURE BSOD

  Hello

  I get some DRIVER_POWER_STATE_FAILURE BSOD everytime I turn on the laptop. Here are the dmp files, please help. Thank you

  https://www.dropbox.com/sh/tc83j0nngt5zqtq/AAAmGEsswykPhBmvwDX51lXZa

  Jindrich

  I have the pleasure and you too!

  If you are comfortable and feel that your problem has been resolved, I recommend you to mark all messages from my friends who responded to your question as answered so this thread is no longer present as requiring a response.

  Kind regards

  Patrick

• Driver_power_state_failure BSOD (blue screen) on the standby or Hibernate mode in Windows 7

  Hernan

  Please provide a fresh link to the files in your sky drive.

  Updated link to update

  https://SkyDrive.live.com/redir?RESID=ED4FED9E957B3A12! 14574 & authkey =! AMPxu8R-BnisNOE&ithint=folder%2c.xml

• Driver_Power_State_Failure BSoD and ndis.sys

  I know there are many of these failures BSOD posted, but I can't seem to find a solution. BlueScreenView said that this Driver_Power_State_Failure is associated with ndis.sys and ntoskrnl.exe. I put the dump herefile. Any thoughts would be great. I got this crash (twice now) on a computer for deployment on the ground at the edge of a river and is connected to a camera that records continuous underwater video. The videos are written on an external hard drive, and I am on Windows 7. The crash occurred several hours after the start of recordings (15-20 h). A program I use breaks images into files of 3 hours. Thank you.

  Post proposed by the host to the appropriate forum category (Windows / Windows 7/Hardware & drivers for Windows/Windows 7 / Performance & system failures). ***

  Hello

  9F error checking, {3, fffffa800804aa10, fffff800019783d8, fffffa800a6fa1a0}

  Probably caused by: pci.sys

  PCI.sys is a component of Windows which means than anything else he has led astray. Further analysis indicates the b57nd60a.sys driver Broadcom NetXtreme Gigabit Ethernet.

  [IRP_MJ_POWER (16), IRP_MN_SET_POWER (2)]
  E1 0 fffffa8008c1c050 fffff80001f1f210-fffffa8009252180 00000000 success error cancel pending
  \Driver\b57nd60a

  b57nd60a.sys 04/09/2012 Driver Broadcom NetXtreme Gigabit Ethernet.

  As you run a MacBook Pro, you need search updated with Apple and Broadcom drivers.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• After awakening DRIVER_POWER_STATE_FAILURE BSoD

  Hello
  my laptop (Asus s56cb) worked without problem for a year, but now it gives me a lot of problems when waking from sleep. It starts without any problems (other than it now takes ages in time compared to the previous, even after a clean reinstall of windows to boot), but putting the pc to sleep and it wake, it freezes at the lock screen. It then takes me to the BSoD, says that it collects some info (while enumerating the DRIVER_POWER_STATE_FAILURE error) and then restarts.
  I tried everything, since the update or disable drivers one by one, to reinstall windows. I lost all my personal files, settings and programs, but the error persists. This is why I think there must be some sort of hardware failure.
  One thing I noticed is that the built in SSD comes preinstalled with the laptop (I think it's Kingston 24GO), is now showing no upward when scanning for hardware using the Test of the Perfomance. He used to appear, but now it does not work.

  Dump files and pc specifications are attached in the following link:

  https://onedrive.live.com/redir?RESID=AD91C7177F649AAC! 6983 & authkey =! AE60bbdXjpEYBB8 & ithint = % 2cnfo

  IRP is active with 8 batteries 5 is current (= 0xfffffa8008149e50)
  No Mdl: No system don't buffer: wire 00000000: Irp stack trace.
  cmd flg cl device file completion-context
  [0, 0] 0 0 00000000 00000000 00000000 - 00000000

  Args: 00000000 00000000 00000000 00000000
  [0, 0] 0 0 00000000 00000000 00000000 - 00000000

  Args: 00000000 00000000 00000000 00000000
  [0, 0] 0 0 00000000 00000000 00000000 - 00000000

  Args: 00000000 00000000 00000000 00000000
  [0, 0] 0 0 00000000 00000000 00000000 - 00000000

  Args: 00000000 00000000 00000000 00000000
  > [16, 2] e1 0 fffffa800772f060 fffff880015a9360-fffffa8009a175a0 00000000 success error cancel pending
  \Driver\iaStorA CLASSPNP! ClasspPowerUpCompletion
  Args: 00041100 00000001 00000001 00000002
  [16, 2] 0 e1 fffffa8009a17060 fffff880012d6e40 00000000 00000000 success error cancel pending
  \Driver\disc partmgr! PmPowerCompletion
  Args: 00041100 00000001 00000001 00000002
  [16, 2] e1 0 fffffa8009a17b10 fffff801d19302a8-fffffa800814aaf0 00000000 success error cancel pending
  \Driver\partmgr nt! PopRequestCompletion
  Args: 00041100 00000001 00000001 00000002
  [0, 0] 0 0 00000000 00000000 00000000 - fffffa800814aaf0

  Args: 00000000 00000000 00000000 00000000

  Loaded symbol image file: iaStorA.sys
  Image path: \SystemRoot\System32\drivers\iaStorA.sys
  Image name: iaStorA.sys
  Timestamp: Mon Nov 19 15:09:40 2012 (50AA9204)

  Please update the Intel RST (Rapid Storage Technology) drivers

  http://www.ASUS.com/Notebooks_Ultrabooks/K56CB/HelpDesk_Download/

  You should also uninstall what appears to be a partial installation / malfunction of McAfee and replace it with Windows Defender.

  How to uninstall or reinstall supported McAfee products using the consumer products removal tool.

  http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  Update or uninstall Diskeeper.

  Note: I recommend deletion

  Image path: \SystemRoot\system32\DRIVERS\excfs.sys
  Image name: excfs.sys
  Timestamp: Fri Mar 30 15:53:05 2012 (4F760F21)

  excfs.sys: http://SysNative.com/drivers/driver.php?id=excfs.sys

• Dealing with DRIVER_POWER_STATE_FAILURE BSOD

  After playing with some new display monitors, everything has been fine up until a few weeks ago, when I noticed that whenever I want to restart my computer, it would display the restart of the screen for about 10 minutes, then it would display a BSOD with the error being 'DRIVER_POWER_STATE_FAILURE.

  Fortunately, after it seems, the system will re-start very well on its own.

  Dump file:

  http://download1513.mediafire.com/7c4dcdr53qrg/hbru16n6y7i9vzo/040414-38796-01.dmp

  Any help and information on why this happens is greatly appreciated.

  -Ben

  Thank you very much!

  9F, {4, 12 c, fffffa8014fb35c0, fffff80402351810} error checking

  1 = 0x4

  2nd = 12 (time-out in seconds)

  Execute! locks to see what is happening:

  0: kd >! locks
  DUMP OF ALL RESOURCE OBJECTS *.
  KD: Scanning of locks which took place...

  Resource @ nt! IopDeviceTreeLock (0xfffff80400f47600) shared 1-wire owners
  Contention count = 12
  Discussions: fffffa8014fb35c0-01<*>
  KD: Scanning of locks which took place.

  Resource @ nt! PiEngineLock (0xfffff80400f47700) the exclusive property
  Contention count = 44
  NumberOfExclusiveWaiters = 1
  Discussions: fffffa8014fb35c0-01<*>
  Threads waiting on exclusive access:
  fffffa800ed20a00

  0: kd >! thread fffffa8014fb35c0
  WIRE Cid 0004.42f0 Teb fffffa8014fb35c0: 0000000000000000 Win32Thread: 0000000000000000 WAIT: (Executive) core criticism
  Mutant fffffa8009379db8 - owning thread fffffa8014516080
  The IRP list:
      fffffa8013c0d2c0: (0006, 03e8) flags: Mdl 00000000: 00000000
  Borrow not identity
  DeviceMap fffff8a00000c2e0
  Owning process fffffa8008499040 Image: System
  Joint process s/o Image: n/a
  Wait start TickCount 1036025 ticks: 19201 (0:00:05:00.015)
  Context switch count 302 IdealProcessor: 1 NoStackSwap
  Get_user_time 00:00:00.000
  KernelTime 00:00:00.000
  Win32 Start address nt! ExpWorkerThread (0xfffff80400d07160)
  Stack Init fffff880321b1c90 current fffff880321b1040
  Basic fffff880321b2000 limit fffff880321ac000 dial 0
  Priority 15 BasePriority 12 UnusualBoost 0 ForegroundBoost 0 IoPriority 2 PagePriority 5
  Child-SP RetAddr: Args to child: call Site
  fffff880 '321b 1080 fffff804' 00d0c7cb: fffffa80'00000001 00000000'00000000 00000000'00000001 00000000'00000000: nt! KiSwapContext + 0 x 76
  fffff880 '321b11c0 fffff804' 00d0b60f: 00000001' fffff880 '022f12e0 00000000' fffff804 00000000' 00000000 00ca 5412: nt! KiCommitThreadWait + 0x23b
  fffff880 '321b 1280 fffff880' 023b18dd: fffffa80'09379db8 fffff880 ' fffffa80 00000000' 11022100 00000000' 6f6d4400: nt! KeWaitForSingleObject + 0x1cf
  fffff880 '321b 1310 fffff880' 023b7ac5: fffffa80'09379 c 50 fffff880 '321b 1400 fffffa80' 137c0df0 00000000' 00000000: ndis! ndisUnbindProtocol + 0 x 95
  "fffff880 '321b 1430 fffff880' 023b943e: fffffa80 ' 11022101 fffffa80'1103 d 101 fffffa80 ' 110221a 0 fffffa80'1103 020 d: ndis! ndisCloseMiniportBindings + 0 x 225
  fffff880'321b14f0 fffff880'0239 c 940: fffffa80'110221 has 0 fffffa80 '110221-0 fffffa80' 13c0d2c0 fffffa80'11022050: ndis! ndisPnPRemoveDevice + 0x21e
  "fffff880 '321b 1680 fffff880' 0239c6f5: fffffa80 '110221-0 fffffa80 ' 11022050 fffff880' 321b 1760 fffffa80 ' 13c0d200: ndis! ndisPnPRemoveDeviceEx + 0 x 84
  fffff880 '321b16b0 fffff880' 023ab685: fffffa80'13c0d2c0 fffff880 '321b 1720 fffffa80' 110221a 0 00000000 00000000': ndis! ndisPnPIrpSurpriseRemoval + 0 x 109
  "fffff880 '321b16f0 fffff804' 0105b8f7: fffffa80'11022001 fffffa80 ' 11022050 00000000 00000001' fffff880 ' 009aa180: ndis! ndisPnPDispatch + 0x2ee49
  "fffff880'321 b 1750'01177 fffff804 39 d: 00000000 ' 00000017 fffff880 '321b 1819 fffffa80' 0ece6bd0 fffffa80 ' 1103fa10: nt! IopSynchronousCall + 0xc7
  "fffff880 '321b17c0 fffff804' 011775e6: fffff8a0 ' 173883 c 0 00000000'00000088 fffffa80 ' 1103fa10 00000000' 00000000: nt! IopRemoveDevice + 0xd9
  fffff880'321 b 1880'01177501 fffff804: fffffa80'0ece6bd0 00000000 00000000' fffff8a0 '05dbac01 fffff880' b 321, 1930: nt! PnpSurpriseRemoveLockedDeviceNode + 0xaa
  fffff880'321b18d0 fffff804'01177468: 00000000'00000000 00000000'00000000 fffff8a0 '05dbacd0 fffffa80' 0ece6bd0: nt! PnpDeleteLockedDeviceNode + 0x5d
  fffff880 '321b 1910 fffff804' 01176bcb: 00000000 00000000' fffff880 '321b1a70 fffff8a0' 06dfed00 00000000'00000003: nt! PnpDeleteLockedDeviceNodes + 0 x 98
  fffff880 '321b 1970 fffff804' 010062e5: fffff880'321b1b88 00000000 00000000' fffff8a0 ' 16893700 fffff8a0' 00000000: nt! PnpProcessQueryRemoveAndEject + 0x2c3
  fffff880'321b1ae0 fffff804'01069346: fffff8a0 173883 c 0 00000000'00000000 00000000'00000001 00000580'00000000: nt! PnpProcessTargetDeviceEvent + 0x9d
  "fffff880 '321b1b20 fffff804' 00d072a1: fffffa80 '14fb35c0 fffff8a0' 06dfed00 fffff804 ' c 0106905 fffffa80 ' 14126ca 0: nt! PnpDeviceEventWorker + 0x2ea
  fffff880 '321b1b80 fffff804' 00c9bfd9: fffffa80 ' 14a3e630 00000000'00000080 fffff804'00 d 07160 fffffa80 ' 14fb35c0: nt! ExpWorkerThread + 0 x 142
  fffff880 '321b1c10 fffff804' 00d507e6: fffff880'009aa180 fffffa80 '14fb35c0 fffffa80' 08495b 00 fffffa80'08499040: nt! PspSystemThreadStartup + 0 x 59
  fffff880'321b1c60 00000000' 00000000: fffff880 '321b 2000 fffff880' 321ac000 00000000'00000000 00000000'00000000: nt! KiStartSystemThread + 0x16

  We have a list of the IORP and a bit of a more informative text in the stack. We can see some NDIS calls, so this may indicate that we are dealing with something of associated network. The driver Interface specification NDIS (Network) is an application programming interface (API) for network (NIC) interface cards. The NDIS form the logical link control sublayer (LLC), which is the top layer of the OSI (Layer 2) data link layer. Therefore, the NDIS acting as interface between the sublayer Media Access Control (MAC), which is the bottom layer of the data link layer, and the network layer (Layer 3).

  The NDIS is a library of functions often referred to as a "wrapper" that hides the underlying complexity of the NIC hardware and serves as a standard interface for pilots of level 3 network protocol and at the hardware level MAC drivers. Another common LLC is the Data-Link Interface ODI (Open).

  Let's go and take a look at the IRP in the discussion thread:

  0: kd >! fffffa8013c0d2c0 PRI 7
  IRP is active with 3 batteries 3 is current (= 0xfffffa8013c0d420)
  No Mdl: No system buffer only: thread fffffa8014fb35c0: Irp stack trace.
  Flags = 00000000
  ThreadListEntry.Flink = fffffa8014fb3990
  ThreadListEntry.Blink = fffffa8014fb3990
  IoStatus.Status = 00000000
  IoStatus.Information = 00000000
  RequestorMode = 00000000
  Cancel = 00
  CancelIrql = 0
  ApcEnvironment = 00
  UserIosb = fffff880321b1780
  UserEvent = fffff880321b1790
  Overlay.AsynchronousParameters.UserApcRoutine = 00000000
  Overlay.AsynchronousParameters.UserApcContext = 00000000
  Overlay.AllocationSize = 00000000 - 00000000
  CancelRoutine = 00000000
  UserBuffer = 00000000
  & Tail.Overlay.DeviceQueueEntry = fffffa8013c0d338
  Tail.Overlay.Thread = fffffa8014fb35c0
  Tail.Overlay.AuxiliaryBuffer = 00000000
  Tail.Overlay.ListEntry.Flink = 00000000
  Tail.Overlay.ListEntry.Blink = 00000000
  Tail.Overlay.CurrentStackLocation = fffffa8013c0d420
  Tail.Overlay.OriginalFileObject = 00000000
  Tail.Apc = 00000000
  Tail.CompletionKey = 00000000
  cmd flg cl device file completion-context
  [0, 0] 0 0 00000000 00000000 00000000 - 00000000

  Args: 00000000 00000000 00000000 00000000
  [0, 0] 0 0 00000000 00000000 00000000 - 00000000

  Args: 00000000 00000000 00000000 00000000
  > [1B, 17] 0 fffffa8011022050 0 00000000 00000000 - 00000000
  \Driver\vwifimp
  Args: 00000000 00000000 00000000 00000000
  IO to check information:
  No information available - the auditor is probably disabled

  ^^ Microsoft Virtual WiFi Miniport driver.

  We will now go ahead and start! devstack the address pinned to vwifimp.sys:

  0: kd >! devstack fffffa8011022050
  ! DevObj! DrvObj! DevExt ObjectName
  > fffffa8011022050 \Driver\vwifimp fffffa80110221a0 NDMP22
  fffffa801103fa10 \Driver\vwifibus fffffa8011057c40 00000090
  ! DevNode fffffa800ece6bd0:
  DeviceInst is ' {5d624f94-8850-40c3-a3fa-a4fd2080baf3} \vwifimp_wfd\5&2032a077&0&02»
  ServiceName is "vwifimp".

  ^^ Here we see also mention of virtual WiFi Bus driver.

  -------------------

  1. with all this said, please remove and replace Kaspersky with 8 built-in Windows Defender for purposes of troubleshooting Windows temporary, as it is most likely originally NETBIOS conflicts:

  Kaspersky - remove http://support.Kaspersky.com/common/service.aspx?El=1464

  Windows Defender (how put on after the withdrawal)- http://www.eightforums.com/tutorials/21962-Windows-Defender-turn-off-Windows-8-a.html

  2 in your list of drivers loaded, dtsoftbus01.sys figure who is the driver for Daemon Tools. Daemon Tools is a very popular cause of BSOD in 7/8 base systems. Please uninstall Daemon Tools. Alternative imaging programs are: MagicISO, Power ISO, etc.

  Kind regards

  Patrick

• Windows 7 upgrade bsod now every 30 minutes - Tosh P200 BB7

  I have just upgraded to Windows 7 - install went well, but now I get the bsod every 30 minutes approximately. The error messages indicate a problem of kernel and disk error hard - not sure it might be. It charges fine, but then (even if I leave just sitting after reboot) it ' new bsod. Clues? I tried chkdsk but who have not as well.

  Did you do a clean install or upgrade to Vista?

  If Vista is bloated with a lot of applications, some applications/drivers can cause a problem in Win7.

  You may need to reinstall Win7 with a clean install

• Lenovo U310 DRIVER_POWER_STATE_FAILURE BSOD after sleep

  Hello!

  I'm sitting here with my U310 I bought for about 1 year. When I bought Windows 8 has been installed, but through the normal procedures of Windows Update 8.1 for Windows has been installed within a couple of months.

  Due to the fact that I am a COMPUTER professional, I have updated all drivers for a 64-bit version of Windows 8.1 (download all of this site) and everything works as it is supposed to-except for the sleep feature.

  After you put the computer in standby mode, and then tries to raise (raise the screen or press the switch) it starts but freeses before I can enter the password for the user. Then, it takes 2 to 4 minutes before entering a nice BSOD.

  Now, I read all the reviews on this site of support and I understand it's something with the drivers. Just today, I downloaded the latest drivers - installed them - with no luck. Same question.

  The computer is re-installed week last due to some other problems with the hard disk (bad points that are now disabled through chkdsk).

  No errors in the logs of Windows.

  No yellow? in the Device Manager.

  No comments on this will be appresiated - I really HOPE to get an answer from someone.

  Best regards

  Mogens

  Denmark

  
  

• Impossible to reinstall Windows XP error: BSOD STOP: 0X0000007E (0XC0000005, 0XF78DA208, OXF78D9F08)

  Original title: BSOD

  tried to reinstall windows xp bsod STOP: 0X0000007E, (0XC0000005, 0XF78DA208, OXF78D9F08 * pci.sys_address more numbers to several numbers and a date stamp.)

  Hello

  1. How are you trying to install?

  2 do you use a full version Windows Setup disc or the recovery disk?

  3. at what stage of installation you get the error message?

  I suggest you try the steps from the link below and check if it helps.

  http://support.Microsoft.com/kb/330182

  Additional information:

  How to fix a computer that does not start: http://windows.microsoft.com/en-US/windows-xp/help/setup/how-to-fix-computer-that-will-not-start

  Hope this information is useful.

• (0 X 00000003 0X0000009F DRIVER_POWER_STATE_FAILURE BSOD,

  Hello!

  Whenever I try to shut down the computer during the night when I am finished working, it doesn't seem to stop. When I stopped him, he just starts to go through the process, but ultimately a BSOD occurs, which forces me to shut down the computer manually by holding the power button.

  Here, I have attached mini-decharges for three consecutive days that had the same BSOD on shutdown, all the files in the links are the same:

  https://rapidshare.com/files/3053652346/minidumps.rar
  http://www.Filefactory.com/file/c18d1c2/n/minidumps.rar
  http://www.mediafire.com/?60phwhgyabsygmf

  My computer model is Toshiba Satellite x 205-sli2 where it is useful.

  I hope that you will be able to help me with this problem. Thank you!

  Hello

  Results verified BlueScreenView WinDBG / DumpCHK.
  
  The Bug_Check were all 9F CAUSE RTKVHDA.sys, which is the function Realtek (r) High Definition Audio driver.

  9F error checking, {3, 8e46d180, 9429cb30, c64c0188}
  Probably caused by: RTKVHDA.sys
  Nom_image: RTKVHDA.sys
  MODULE_NAME: RTKVHDA

  RTKVHDA.sys dated 28/07/2009 Realtek (r) High Definition Audio Driver to function.

  Loaded symbol image file: RTKVHDA.sys
  Image path: \SystemRoot\system32\drivers\RTKVHDA.sys
  Image name: RTKVHDA.sys
  Timestamp: Kills Jul 28 06:02:38 2009 (4A6EF6EE)

  1. update RealTek Audio Codec driver.

  Driver Realtek HD Audio Codec of USA - right side-
  http://www.Realtek.com/default.aspx

  2.check with Toshiba Support, their drivers and documentation online and ask in their forums
  on the problems known. Look for the updates to the BIOS, chipset of low level drivers and major
  embedded device drivers. Also update all drivers - run DriverView - important separate device
  SEE to hide drivers Microsoft - those without drain update in their name.

  TOSHIBA = BiosVendor
  BiosVersion = V2.10
  BiosReleaseDate = 20/12/2007<- check="" for="" updates="" to="" the="" bios,="" low="" level="" chipset="" drivers,="" and="" the="">
  device embedded and separate drivers.
  TOSHIBA = SystemManufacturer
  SystemProductName = Satellite X 205
  Family = ABCDEFGHIJKLMNOPQRSTUVWXYZ
  SystemVersion = PSPBUU-01900J
  SystemSKU = 012345678912345678912345678
  TOSHIBA = BaseBoardManufacturer

  3 use the other methods in the troubleshooters below.

  ====================================
  ====================================

  Check this KB:

  The shutdown process does not terminate and you receive an error message on a computer that is
  running Windows Vista or Windows Server 2008: "Stop 0x0000009F"
  http://support.Microsoft.com/kb/972109

  ----------------

  You use Roxio or Nero programs? They have been known to cause this problem even
  If they worked well for a long period of time. If so check with their support.

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot BlueScreens - answers top 3 (+ 1 more).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  ----------------------------------------------------------

  References to Vista also apply to Windows 7.

  This "might" be a power problem, even if this isn't the most common cause - in this case
  It seems that the PSU could be the fault.

  9F is probably a driver issue. Security/antivirus/antispware programs can also cause these issues.
  Have you added the recent devices or the updated drivers - don't forget to check in the Windows updates to see
  If a driver has been updated before this happen. This can also be caused by a loose card or cable
  and even a weak power supply.

  This error means that a driver does not properly support the power state. Check in Control Panel - device
  Manager to ensure that the drivers are not stop during sleep - double-click adapter - NETWORK adapter
  and WIFI - healthy and others - tab power management - uncheck allow the computer to turn off.
  Maybe the only has a problem.

  Start - type in the search - find MSCONFIG in top - right, click on – RUN AS ADMIN

  General tab - tick this box start Diagnostic - APPLY / OK - REBOOT

  Try it now. If the computer still blue screens thinks that video driver. Otherwise think the card NETWORK, Wifi, sound, or...
  (and it might still be video interacts with something else). See following message for my
  generic driver update methods.

  BCCode: 9F 0x0000009F<-- read="" this="">
  * 1167.html? order = date http://www.faultwire.com/solutions-fatal_error/Driver-Power-State-Failure-0x0000009F-

  ==========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows Vista 64 BSOD why?

  A computer laptop studio dell with windows vista business 64-bit freezes and screen BSOD about two or three times a month. It is more common during the installation. I downloaded one of the files of dump here: http://rapidshare.com/files/372000871/Mini040410-01.dmp.html

  It has a suite of panda security and no other security software...

  Thank you very much for your answers.

  Hello

  Have you recently added any hardware? Have you updated any drivers just before this started? (Check
  Panel configuration-updates of Windows to see if all drivers have been updated it there all the time it started)
  Main likely culprits are video driver, other great drivers, memory and antivirus/antispyware/security
  products could be at fault as well as reader questions.

  Use the troubleshooter below and refer to the following message to drivers and memory when you get to
  These sections and then back to the resolution of the problems according to the needs.

  -------------------------------------------------------------------------------

  BCCode: 50 0 x 00000050

  Cause

  The BCCode 50 usually occurs after the installation of the installation of a faulty material or failure of
  material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  Solve the problem

  Solve a defective hardware problem: If the material has been added to the system recently, remove it to see
  If the error recurs. If the hardware failure existing, remove or replace the faulty component. You must run
  Diagnostics of material provided by the manufacturer of the system. For more information about these procedures, see the owner
  Manual for your computer.

  Fix a defective system service: Disable the service and confirm that this resolves the error. If so,.
  Contact the manufacturer of the system service on a possible update. If the error occurs during the system
  startup, restart your computer, and then press F8 at the menu character mode that displays the operating system
  choice. In the Windows Advanced Options menu that results, select the last known good Configuration
  option. This option is most effective when a pilot or a service is added at a time.

  Solve a problem of antivirus software: Disable the program and confirm that this resolves the error. If she
  is the case, contact the manufacturer of the program about a possible update.

  Fix a corrupted NTFS volume: Run Chkdsk /f /r to detect and repair disk errors. You must
  Restart the system before the start of the analysis of disk on a system partition. If the SCSI hard disk, check for
  problems between the SCSI controller and the drive.

  Finally, check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the error. Disable the cache in memory of the BIOS might also resolve it.

  BCCode: 50 0 x 00000050<-- read="">
  * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

  ------------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  as information such as error information and STOP codes
  IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do without if needed fail or the Vista DVD command prompt mode
  or Options of recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 7 random BSOD

  You can see my specs system here:

  http://Speccy.Piriform.com/results/1OwYBS1DNyFTxrOXiAe0rzF

  I have also 2 x 1 and 2 x 512 Rams too and 3.0 ghz cpu.

  I downloaded my silent files:

  https://onedrive.live.com/redir?RESID=8713C95A5F5EC95A! 116 & authkey =! AMZRN_QCvduynzs & ithint = % 2cdmp

  in the last month, there was a lot of BSODS. I watched with view blusscreen but a lot of different drivers and the reason, so I'm confused.

  I tried sometimes to add Rams, sometimes tempted to switch the cpu to 3.0

  And drivers updated pc.

  So, what should I do now? I need to fix my windows 7? I want to stay in windows 7, I love home 7.

  And sometimes itrestarted prior to loading office, smtimes before boarding, win 7 animation. So once he said you had to fix it, because there is a defective file, but then I restarted and I cpuld go in my office.

  my files all here

  https://onedrive.live.com/redir?RESID=8713C95A5F5EC95A! 154 & authkey =! AI1rtI2h_5L_Uag & ithint = % 2cdmp

  In this computer I also have xp on different hard drive, when I use it with 2.8 or 3.0 ghz, no BSOD.

  I'm not sure quue my Rams also. I did memtest for a short period.

  I downloaded a driver update software to update my drivers. Maybe it caused. because my pc is very old and I want to be able to use it for a short period.

  You can see my xp BSOD here

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-update/Windows-XP-BSODs-random/079b5d5c-8327-4633-BD0C-d75a650e3df2?TM=1463001224968

  CC

  Please run view driver and download the output as described in the wiki below.  You must have a lot of drivers no MS more than 5, and you do not have a load of nvidia drivers

  To help us solve your problem please run view driver as described in this wiki
  http://answers.Microsoft.com/en-us/Windows/wiki/windows_10-hardware/driver-view-a-very-handy-utility-for-examining-the/312f64dd-0e54-42b7-BF67-19e3993bd2b1?TM=1457084849545