Windows 8 freezes using the WN851ND V1 wireless card

Similar Questions

• Automatically use the wired on wireless LAN connection when using the docking station

  Hey guys!

  I use the my T500 with the Advanced Mini Dock @TheDude recommended in this thread: http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T500-Recommended-Compatible-Docking-Station...

  I had almost a month now, and whenever I anchor my laptop I have to pass the connection wireless switch off hard or using FN + F5 and extinguish this particular radio.

  Is it possible to have the computer automatically choose the wired connection when it is available, otherwise use the wireless radio?

  I use Windows 7 Prof 64 bit.

  Thank you

  c1p0

  ThinkVantage Access Connections (AC) can be configured to do this. Change your location profile and change the order of the adapter associated with this place, for example, order first as Wired and Wireless second.

  When I am connected Wired and I pull the Ethernet cable, AC will switch to using wireless automatically. When I put the Ethernet back in, it starts automatically by using the wired and wireless don't report limited or no connectivity (which means that the switch has occurred). You will have to perhaps set up wireless in AC power options, i.e. disable radio when not in use (I did not sentence again).

  This could be similar to a docking station solution. Mine is without docking station; When I'm at the office and go to a meeting, I pull the wire and have continuity.

  Ideally, the CA should provide a solution. But it may take some fiddling.

• My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse.

  My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse. It runs OSX Mountain Lion (not sure which version) and is a model 27 inches.

  have you tried to change the batteries in the mouse?

• What is a quick way to exit Windows 7 without using the mouse?

  On Windows XP, I could type the window then u and U key to exit.

  On Windows 7 I seem to need the mouse to exit, even if I did stop my setting of the default button.

  In addition, Windows 7 wants to drag me through a few caveats that I've closed everything.

  Sometimes, it's just my email that is open or a file folder, then there is no pending work.

  But I want to just close without the quiz on my understanding of the risks of loss of work, etc..

  I know that some applications such as Norton and Windows update can simply kill all ongoing enforcement programs to restart

  during the installation of updates, so the 'risk' is not worth the constant reading.

  Here are the steps to stop Windows 7 without using the mouse:

  Press Windows (Windows key).
  Release it
  Press the right arrow key
  Press ENTER key

  If you don't want warnings to stop, you can create a shortcut on the desktop with the command-line ' shutdown/f' and assign a key combination.

  See the following link for more shutdown command line options:
  http://www.computerperformance.co.UK/Windows7/windows7_shutdown_command.htm

  Once you create the shortcut icon on the desktop, you right-click on the icon, select Properties. In the shortcut tab, you can assign a key under the shortcut key combination to launch this program.

• How to upgrade a driver automatically in Windows NT by using the batch file

  I use the devcon tool to update a Windows XP driver, but unfortunately it does not support Windows NT. So I'm looking for a similar tool for Windows NT. Does anyone know any tool / or script that would update a driver via file/command line in Windows NT?

  Thank you for taking the time to read the question.

  Hello supportalcon,

  Thank you for the question!

  It is disheartening to know that have problems you with the Windows Driver. As I understand it, you need to update a driver automatically in Windows NT by using the batch file.

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums. You can follow the link to your question:

  http://social.msdn.Microsoft.com/forums/en-us/categories/

  Meet us if you face any problem of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• I use Windows 10 and use the Canon SX20 IS. How to use the function of Photo stich?

  I use Windows 10 and use the Canon SX20 IS. How to use the function of Photo stich?

  Is it possible to get the procedure to use feature stich photo?

  Will be Zoombrowser EX for windows 10 wotk?

  If any expert can guide me... that will be great.

  Hi Sat17,

  Thank you for your inquiry.

  For Windows 8 and beyond, ZoomBrowser EX has been replaced by EX. ImageBrowser

  Your software you will need to updated for Windows 10.

  You can access the software for your camera by clicking here.  Once on our site, scroll down to "Drivers and downloads", then use the drop down menu to choose "8.1 Windows" or "Windows 8.1 (x 64)".»  Your camera software has not been updated for Windows 10, but for Windows 8.1 software will run on your computer.

  To update your software, click the [Select] button to the right, then click on "How to download and install" for installation instructions.

• Mac with bootcamp to format and reinstall windows, can I use the same cd key and product?

  I want to reformat my mac...

  I want to reformat my mac with bootcamp and I want to reinstall windows. can I use the same cd key and product? or do I have to do something with the current activation? Windows will recognize that it is the same computer after I repartition it?

  I want to reformat my mac with bootcamp and I want to reinstall windows. can I use the same cd key and product? or do I have to do something with the current activation? Windows will recognize that it is the same computer after I repartition it?

  If it worked the first time, there is no reason that it will not work the second time on the same computer, as long as the Windows 7 is a full version.

  If this is an upgrade version, you must have the qualifying OS installed and enabled before you upgrade and it will work.

• I can't add a new font, he said that the police is in use, please try again when windows has finished using the font

  I am installing a true type font but keeps popping up with the error: fonts to use and can not be installed, please wait until windows has finished using the font. I have closed all running programs and tried to restart my computer, but it always appears with the same message.

  Hi dillydally01,

  1. did you of recent changes on the computer?

  2. How do you install the fonts on the computer?

  I suggest that you refer the below Microsoft article and try again mentioned step to install fonts in Windows and check if it helps.

  How to install or remove a font in Windows

  http://support.Microsoft.com/kb/314960

• I can't find instructions on setting up or using the keyboard Microsoft Wireless Comfort 1. 0a.

  I can't find instructions on setting up or using the keyboard Microsoft Wireless Comfort 1. 0a.  I GOOGLED it but the only reference I find tells me to go to the download page on the Microsoft Web site for this product.  I went to this site and the only thing it is limited warranty info and Product Guide.  I downloaded the Product Guide, but it only covers the basic information like it do not immerse in water, do not take part and the various regulations of the FCC about the product.  There is no info in this guide on how to configure or use the keyboard AT ALL.  Guidance on how to use this product is probably somewhere?

  The dongle is not plug it into the keyboard, it plugs into the USB port on the computer.  Wireless keyboards is not related to them - think of that.  :-)

  If you are missing parts to the keyboard, I would just buy a new one.  You can buy wired keyboards for as little as $4 these days, wireless are a little more expensive of course.  Personally, I find the wireless keyboards to be a pain because the batteries always come out in one in-opportune times.  YMMV

  Good luck.

• can I reactivate windows 7 by using the ID of the original product after upgrading the hard drive.

  Original title: reactivate Windows 7.

  I want to spend the hard drive on my laptop.

  The question is, when I remove the old hard drive and put a new, obviously, I need to install windows on the new drive system, can I reactivate windows 7 by using the ID of the original product?

  If this is not the case, how can I do?

  Thank you.

  How to pass windows 7 to a new hard drive using Acronis True Image Home 2011:
  A step by step guide on the use of Acronis True Image Home 2011.
  http://www.PAGESTART.com/acronisnewharddrive01.html

  (Note: Acronis is now 2014, but the technique is the same)

  Other Image backup options:

  Acronis True Image 2014 - has a 30 day trial version available, key to test sent to your Email address.
  Note: Initialization of cloning and the road (creating a MBR) are not supported in the trial version.
  For the trial version, the recovery is only available when starting an Acronis Bootable Media CD.
  Install Acronis and then create a bootable media restoration/rescue CD before you start creating your first backup image
  http://www.Acronis.com/homecomputing/products/
  30-day trial: http://www.acronis.com/homecomputing/products/#tryorbuy
  True Image User Guides and documentation:
  http://www.Acronis.com/support/documentation/
  2014 supports XP, Vista, Windows 7, Windows 8 and 8.1

  Paragon
  Free version: http://www.paragon-software.com/home/br-free/
  Guide: http://www.paragon-software.com/home/br-free/download.html
  Home Version $ 39.95: http://www.paragon-software.com/home/brh/
  Support: http://www.paragon-software.com/support/

  Macrium Reflect free
  Free version: http://www.macrium.com/reflectfree.aspx
  (no technical support available for the free version)
  Macrum reflect Standard ($49.99)
  http://www.Macrium.com/personal.aspx
  Suport: http://www.macrium.com/ticket.aspx

  Note: For users who have a Western Digital hard drive, there is a free version of Acronis 2013:
  http://support.wdc.com/product/downloaddetail.asp?Swid=119
  Release notes: http://support.wdc.com/download/notes/ATI_WD_RN_5962.pdf
  Guide users for WD Version: http://support.wdc.com/product/downloaddetail.asp?swid=119&type=userguide&wdc_lang=en

  How to pass windows 7 hard disk nine or greater using the backup and restore of Windows 7
  http://www.PAGESTART.com/win7bckuprstrnhd072610.html

  After you moved to the new drive and are convinced that everything is working Ok, then you can format the drive or temporarily start from the old drive and open a prompt (run as administrator) and quick entry: slmgr /upk and press ENTER.  This allows to uninstall the product key from the old drive.

  J W Stuart: http://www.pagestart.com

• How sleep windows 7/8 using the command line?

  How sleep windows 7/8 using the command line?

  for example:-l is for disconnection, what command should I give to sleep?

  Hello

  Powercfg command-line options
  http://TechNet.Microsoft.com/en-us/library/cc748940 (v = WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows 7 freezes after the password entered

  It is a windows 7 Compaq Presario laptop. It freezes immediately after the entry of the password. It crashes in safe mode as well. When I go to command Mode need me to network mode so I can't run all the tests. The fan had run hard before, but I don't think that is the main question. I could install a new hard drive but I don't have an operating system. I expect to get out of this without spending too much money

  Hello

  Thanks for posting the question on Microsoft Community.

  According to the description, it seems that Windows 7 freezes once the password is entered.

  However, we need more information about the issue to help you better.

  Please help me answer this question.

  Were there any changes made to the computer before the question?

  I have this link which should guide you in the right direction for the freezing of Windows 7.

  Try the steps mentioned in this link and check:

  Crashes Windows or freezes

  http://support.Microsoft.com/kb/2681286

  Note: The Microsoft Safety Scanner expire after 10 days from the date of installation.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. If you have questions more related to Windows feel free to post here at Microsoft Community and we will be happy to help.

• Installation of 8.1 of Windows 8 by using the windows 8.1 image file located on USB

  I want to do the Windows Installation 8.1 do I need key to install the pre-installed Windows 8 windows using the windows 8.1 image file located on USB downloaded from microsoft.

  Hi Lovina,

  We are here to help.

  Installation of Windows 8.1 using the image file is on your key USB can be activated without the product key.

  You can also consider to upgrade your computer to the latest version of Windows, Windows 10. Check out this article for more of Windows features 10

  Please do not hesitate to contact us if you need assistance.

• How much of my computers download Windows 8 Pro using the disc?

  Original title: windows 8

  I bought Windows 8 Pro for $ 39 and also bought the drive... I've downloaded on my desk... my question is how many of my computers can download Windows 8 Pro using the disc? Thank you.

  1 license, 1 computer. You can use the same disc but to update multiple computers if you have additional product keys (licenses).

  How to buy additional keys:

  Press the Windows key + X

  Click System

  Click on see details in the Windows Activation

  Click on the link: buy Windows to another computer

  http://www.Windows.com/buy

  Yes, you may be prompted to go through the installation routine with just the web installer of 5 MB, but you don't actually have to download, simply to purchase and the product key will be presented to you in the Upgrade Wizard (you also a copy is sent to your email address).

• East - the Pavilion 20 it be upgraded to the 5 GHz wireless card?

  The HP Pavilion 20 can be improved to support the 5 GHz wireless card?

  HP Pavilion 20-b010 all-in-One desktop computer
  http://support.HP.com/us-en/document/c03524659

  This computer has an integrated Ralink RT-5390 mini-map PCIe wireless.
  http://www.MediaTek.com/en/products/connectivity/WiFi/PC/PCIe/rt5390/
  This card is the only ONE BAND (2.4 GHz), supporting IEEE 802. 11 b, g and n

  IF you wish for the 5 GHz band,
  THEN BOTH devices must support the new IEEE 802.11ac Standard Dual-Band.

  FIRST, a wireless (WAP) access port or Wireless Router on your home network must be Dual-Band (IEEE 802.11ac).

  IF this equipment is provided (for rent) your provider of wireless Internet (ISP).
  THEN, you will need to work with them for this upgrade (may have fees $$).
  IF you have your wireless router, THEN it must support IEEE 802.11ac for the 5 GHz band.

  SECONDLY, your HP Pavilion 20-b010 all-in-One will require a new (replacement) wireless card and MAY require the replacement of the antenna (dual-band).

  The AC-7260 Intel Dual-Band with Bluetooth 4.0 is a topic highly IEEE 802.11ac compliant PCIe minicards.
  IF you only had previously not supported Bluetooth, THEN this additional feature is a BONUS.
  http://www.Intel.com/content/www/us/en/wireless-products/dual-band-wireless-AC-7260-Bluetooth.html

  UPGRADE and MAINTENANCE GUIDE
  for computer all-in-one HP Pavilion 20-b010
  http://h10032.www1.HP.com/CTG/manual/c03598525.PDF