Windows 8 keyboard problem

Similar Questions

• HP G61 windows 7, keyboard problems with

  HP G61 windows 7, problems with - keyboard certain letters will not work. (b, n) Summer great for 14 months - now out of warranty. Any ideas?

  Sorry you have keyboard problems.

  These are only two keys that don't work?

  You can try to uninstall and reinstall the keyboard driver through the Device Manager in Control Panel.

  It is possible, there is a problem with the hardware with the keyboard and the keyboard needs to be replaced.

• keyboard problem - ctrl, alt key Caps and windows does not

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: Hi friends I have serious laptop keyboard problem. Initially, I had a problem as my keyboard as control key function is jammed up. After giving the driver update, it work properply. After a few days at each reboot my system, I need to give the driver update to make my keyboard working properply. After a while when I press BACKSPACE again once he goes back to the same problem as the stuck key then upward. now the keys to my car, control, windows and alt do not work

  Hello
   
  1. What is the number of brand and model of your laptop?
  2. have you contacted the manufacturer of your laptop?
   
  Follow the steps mentioned below.
  Method 1:
   
  Step 1:
   
  Test the keyboard in safe mode and check if the problem persists in safe mode.
   
  Step 2:
   
  If it works in safe mode, perform the clean boot and check. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
   
  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.
   
  Note : follow step 7 to your computer as usual, after the test.
  
  
  Method 2:
  a. check if on-screen keyboard funvtions normally.

  b. If possible, try to connect an external keyboard and check if the problem persists.

   

  If the problem does not persist if could be a hardware problem and suggest you contact the manufacturer of the laptop.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• KEYBOARD PROBLEMS AFTER UPGRADING WINDOWS VISTA

  After update to automatic in windows vista, keyboard on my computer toshiba laptop no longer recognizes Maj characters and produced the capitals only with the caps lock on.  Any ideas on how to solve this problem would be appreciated.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Go to the website of the manufacturer of your laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  And read this info:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Keyboard problems - Windows 7 RTM on Thinkpad x 301

  Greetings,

  The fighting had thereby a few days and haven't seen all the other notes on this subject.

  I installed Win 7 (business) RTM about 3 times - both 32 - and 64-bit and is the version gives me a problem with keyboarding. Basically, if I type REALLY SLOW, all right. But whenever I go back to normal typing speed, I'm getting erratic behavior. Sometimes while I'm typing, the cursor will jump to a place earlier in the same line and insert new text from there, or sometimes it jumps to the line next, or worse yet, I use it via Remote Desktop on my primary computer running Outlook, it will send the message in the middle of a sentence. (A bit annoying...!)

  It's as if I'm hitting certain types of combination, but I was not able to get fairly constant to understand. It could also perhaps be a sort of full buffer problem after - x-strikes. So here's a question - if you have no job, can you confirm that beta Lenovo drivers you have installed?

  I tried a little, and later a clean 64-bit settling without adding anything else yet.

  Other keyboard problem and some missing OSD indicators, I like the performance and ease of use. But if I can't get the keyboard works, I'm back to XP...

  (Note that I test - I reinstalled XP preload, and kbd was fine - is not material)

  Thanks for all the ideas...

  At this point, I REINSTALL ALL the detached (yet pre-release at the time, in late September) did was install drivers and keyboard.  However, I need to agree with poster above - we need Lenovo to specify exactly what drivers are needed and any requirement of installation sequence.   Somehow, I think this is what makes the difference in my case, but I'm still just guess.

  but so far, Win7 on my x 301 now works...

  Good luck to all-

  Anthony

• Satellite Pro C50 keyboard problems - A - 1 L 6

  Hello

  I just bought this new Satellite Pro.

  I have installed all the drivers and updated the bios to the latest version, but I still have the same problem: when I write, many times my keyboard writes double letters (for example, all ten words written keyboard a letter double, as "keybboard").

  I tried also to change the properties of the keypad on the control panel of Windows 8, but nothing has changed.

  I called support, but they just told me that I have to bring my laptop in a helpdesk: but I need my new computer to work, and I wouldn't be happy to lose at least 4 weeks!

  And, support told me that, if the laptop has no hardware problem, I would have to pay for assistance...
  .
  So, this is my first experience and unlucy in the world of Toshiba...
  Is there someone who can give me some advice to solve this problem?
  It may be a problem running on the new laptops, and someone knows how to fix this?

  Thank you very much!

  Hi guys,.

  As far as I know that these similar keyboard problems in the past could be resolved by the BIOS updated.
  I found the new BIOS for Satellite Pro C50 - A
  http://Support1.toshiba-tro.de/Tedd-files2/0/BIOS-20140912105436.zip
  Worth a try

  Another question: If someone has done to test a USB external keyboard?
  In the case where the external USB keyboard would work correctly, this issue isn't associated with BIOS or keyboard controller but probably his keyboard fault internal.

• C50-A283 satellite keyboard problem

  I have a keyboard problem. [Sorry for my bad English.
  My C50-A283 satellite keyboard does not work properly. It will automatically start and back. Some keys don't work not that is 'L', 'I' button does not work. Even using "on the keyboard of the screen" or external keyboard, the result is the same.
  Thank you.
  my laptop has active windows 8 OS

  Hi noor21

  If you have similar issues using internal and external keyboard, then I recommend you to run a recovery process that would fix the laptop back to factory settings.

  After this check, if your BIOS is up to date.

  If the keyboard problem will always appear even if you define the laptop back to factory settings, you must contact the maintainer authorized Toshiba because the keyboard failure may be related to hardware problems.

• Re: Satellite L650 keyboard problem

  Hi, I have a satellite L650. After the initial installation of the operating system, I have a keyboard problem.

  When I press SHIFT @ I get. "

  When I press SHIFT "I get @"

  Most of the SHIFT functions work properly, but there are still a few examples like that.

  I checked the forums and google the problem, in other models there was problems of similar keyboard that have been fixed with a BIOS update.

  The BIOS installed on my machine is 1.6 which seems to be the last. I installed the 32-bit version of windows 7.

  Someone at - there a soloution?

  Hello

  try to choose English (United States) in the language settings:

  http://img51.imageshack.us/img51/9320/Setla.jpg

• F100-NH Pavilion: Pavilion HP KEYBOARD PROBLEM

  Hello world!

  I have a laptop HP Pavilion F100-NH with Win 8.1.

  2 weeks before my keyboard has a problem. I started windows and I couldn't type anything. I removed the keyboard from the Device Manager, and then I restarted > it would be OK.

  But today, I have the same problem. I just removed the keyboard from the device, restarted Manager and nothing happens... And now I don't see the "keyboard" devices more. Strange.

  The hardware itself has a problem, because I can use it during startup. Windows has a problem. How could I solve this problem?

  I tried to reinstall the chipset driver (I thought that this may be a solution), but I couldn't find the chipset driver.

  Thank you for your answer!

  Best regards:

  Csaba

  HI @loscsaba,

  Thank you for your request!

  I understand that once before you have had a problem with the keyboard does not not after scoring in Windows.  You went to the Device Manager, removed the keyboard and rebooted.  The keyboard once again fully functional. Two weeks later the return issue, but repeating the previous steps did not help. After removing the keyboard when you restart, it was no longer listed in Device Manager.  When in Device Manager, if you are looking for a material change the keyboard appear?

  Thinking it might be a chipset driver you went looking for an update, but have been unable to locate one.

  When I searched for your laptop, I get several results.  To get the right pair, please provide your model number. How can I find my model number or product number?

  Here is a link to HP Notebook PC - portable keyboard troubleshooting (Windows 10: 8).  You would also go the HP Support Assistant to help solve this problem?  You can also try running the troubleshooter in Windows Help.

  Please let me know the results.

  Good luck!

  Please consider marking the post helped you overcome your problem with 'Acceptable'. This would allow others who may encounter the same or similar problem to find information with greater ease.

  If you appreciate the help, please click "Thumbs Up icon" below.

• HP 2000-2d29DX laptop PC: keyboard problem

  Hello guys,.

  I have recently encountered problems with my keyboard and touchpad. But first I turn to the most pressing is the keyboard problem. Sometimes, when I booted my computer a few keys alphabet such as r, o, m (seemingly random keys) do not respond. This problem started with my arrow keys but since moved other keys. I tried to reset my PC that did not help much, so I uninstalled the keyboard driver via the thinking Device Manager I easily find a nd downlaoad and install new drivers from HP support or elsewhere. So the problem, I could not find the drivers for my computer, I searched for the last 2 days and I am always unsuccessful and very frustrated, I can't use my keyboard and now I do all my typing via the on screen keyboard, very taxing to say the least. Help, please. Thank you!

  Hi there @Orlando-Okwayo,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that the keyboard does not work on your laptop of HP 2000-2d29DX. You mentioned that some of your keys on keyboard do not respond.

  Please follow these steps in troubleshooting provided:

  • Beginning
  • Search for Device Manager
  • Search results, open Device Manager.
  • Click on display
  • Show hidden devices.
  • Click the arrow next to keyboards.
  • Right click on the name of the keyboard device.
  • Select uninstall.
  • Continue deleting the names of devices in the category keyboards until the feature of all the names have been uninstalled.
  • Restart the laptop twice.

  I found a document of troubleshooting for you to try called Portable keyboard troubleshooting.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated. I looked at your page HP 2000 - 2d29DX Notebook PC (ENERGY STAR) - software and drivers and I don't see any drivers for Windows 10.

  Another option for you would be to restore to a previous Point before this happened. He must put it without losing anything.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• Trying to install a new installation of win xp on a dell insp 700 m. all is well until you are ready to hit enter to select where to load windows. the keyboard freezes and crashes.

  win xp install

  Im trying to install a new install of win xp on a dell insp 700 m. all is well until you are ready to hit enter to select where to load windows. the keyboard freezes and crashes. It worked early, when I hit enter to launch the cd? any ideas? TX marty

  Thank you! I tried what you mentioned, nothing has worked... I plugged a usb keyboard and it works, so I'm starting to believe it could be a motherboard problem. I finally got windows xp pro installed, no conflicts in Device Manager, all the drivers are installed and now running smooth. I removed the keyboard, and re-set, all connections look good, but still not good. the synaptics keyboard works fine and both rt & lft click the buttons. I pulled the ram to inspect it, it's the right speed, ddr2700, and after running for an hour, it was cold to the touch! I'll try to get a new keyboard and replace it, their pretty good work, if still not good it becomes pieces on ebay... lol tx again... Marty

• keyboard problem: @ key appear ", AND" key appear @, too... well

  keyboard problem I use the keyboard to uk vs usa? @ key appear ", AND" key appear @, too... right?

  Hi Ise,

  If you are using a UK keyboard you must ensure that the United Kingdom is selected in the "Region and language" section of the control panel. Open Control Panel and click the language and region. Once the window opens, click the keyboard and languages tab. In the keyboard tab window, click the button of "change of keyboard". In this window check that the English (United Kingdom) is the default language in the "default input language section dialog box. If it is USA then click on the arrow down and change it to the United Kingdom. If UK is not there, then click on the Add button to add this language.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Windows Vista - keyboard does not type a few letters

  Original title: Windows Vista - keyboard

  Original title: salvation

  Some letters don't work when I hold the SHIFT key, what can I do?

  Hello RokurOlsen,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, it seems that you have problems with the keyboard. As I understand it, you cannot type some letters.

  I need to ask you some questions to help you better

  1. What is the brand and model of the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the link and check.

  Type without using the keyboard (on-screen keyboard) (Windows Vista) 

  Answer to us if you are having problems with the keyboard or any other problem of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• I started to develop some keyboard problem checked for all solutions could not.

  I started to develop checked for all the solutions found no keyboard problem. I realized that my net work is tahen above and my files diverted that I get these links of text by people representing miceosoft, promising new computer, employment and they reformatted my windows from vista to 7 and said that my reward .they have to my media my setings channged al and obtained the list of my contacts by sending them the meseges. Send me micro soft web pages which later changed in sofamicro. I'm afraid to use any String with soft micro logo on it .i ned help please, my our user at my items folders and emails al ben reset my key board break some keys and few of them do not work, the poster to the conection USB keyboard device manager there is corruption. Norton report ip who took the relay from my computer... I am the only user of this model as administrator, but the net work listed others that I can't remove, this AI out of this world, al tools that they could use to place these links and ask me click on a such that they were the ms Tech

  I do not understand some of your words.

  • 'stached"--> home?
  • "delwtwd"--> deleted?

  Assuming that I got those right, the answer is not much sense yet.  Take a deep breath, take your time and use simple language with common punctuation.  Type slowly.  Your hands are going faster than your mind and makes it hard to follow.  Don't make things worse by getting over excited.  ;-)

  What I tell you (based on the original post and now this response), this is your best course of action with your horribly hacked and infected system should all erase and start over - disconnecting the network while you do this to your computer.  If you have a USB and there are some select files/folders you want to have no EXECUTABLE in them - copy those turned off.

  You should probably reset each password you have for each account that you have as well – each of them.  Anywhere - Internet, etc.

  You may want to also likely reset everything router you might have that connect you to the Internet if there is a custom configuration - as they have probably your router pirate as well - giving them a back door at least in your network.

  What you have presented I can assume only you have been scammed.  They have probably used something like VNC or TeamViewer and your willingness to participate to take complete control of everything you have on your computer and possibly connected to your network.

  If it is a business network - disconnect your computer it immediately and contact your it Department and let them know what you think.

• Vista slow system and displaying the message "Windows has a problem.

  I feel like a complete NEWB. I'm going on my computer today after two days. My computer starts slowly. More slowly than usual. The first thing I see is this grey screen with a white cursor that is HUGE on this subject. At the same time, I see that it is not fair. Then comes a box asking me which language I want to for the keyboard and so on. And then, "Windows has a problem. It must be understood, then restart. I have this. Wait 5 minutes, and then the computer restarts and everything's all right. However, what on Earth was that and how can I avoid this from happening?
  * original title - >.< >

  He said anything as Startup Repair in the window?

  If that was the case, when you finally stop the computer he could have closed inappropriately, as if there is a power failure, or you did a forced shutdown. So it automatically does a startup repair, looking for anything that did.

  If this is the case you have nothing to fear, because he won't unless something gives him a reason to run.