Windows cannot find "helpctr.exe" how find it or replace it?

Similar Questions

• Error - Windows cannot find HELPCTR. EXE, not able to open help and support in Windows XP Edition family.

  Original title: help and support on windows XP Home Edition / ' helpctr.exe no path of the Panel start.

  He is also said to open help and Support, but when I get the file he doesent exsist. I typed the micrsoft directions but it just says: the same thing-Windows cannot find helpctr.exe... then when I try to search in the Middle it says librrary something LONG when I X out the screen goes blank then comes back healthy Windows open a window I have never heard od to type a regrestry or something can someone help me with this question

  Found that I had the same problem here: http://support.microsoft.com/kb/555472

  "To solve the problem, follow these steps:
   
  Go to the Windows registry.
  Navigate to the following registry key:
   
  HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Windows/CurrentVersion/App Paths
   
  -Double-click HELPCTR. EXE.
  Right-click (default) in the right pane, and then click on edit.
   
  Type the following command:
   
  C:\WINDOWS\PCHealth\HelpCtr\Binaries\HelpCtr.exe
   
  Click OK.
  Exit the registry editor and restart Windows XP".

  what I did export this key to work windows XP install and import the reg file for windows failure or you can manually create the key and send it to point to the location of the file if the file is missing then copies the file u do not know if the file differs from the House of Pro but its another option to take if U'r is still stuck.
  Sort my prob was the corruption in the reg for missing file that the hotfix may not work as such. If U still have the problem (cause the post is old) so good luck

• "windows cannot find"helpctr.exe"make sure you typed the name correctly..."

  I did system restore recently to avoid some problems with internet connectivity. Since then, when I click on help and support I get a error message "" windows cannot find ' help ctr.exe. "" Make sure you typed the name correctly and then try again. To search for a start button click on file and then click on search.

  Hello

  You can try the steps of troubleshooting provided in the links below and check if the problem persists.

  Cannot load help and Support Windows

  http://support.Microsoft.com/kb/555472

  You cannot open the help and Support Center in Windows XP

  http://support.Microsoft.com/kb/888018

  Note:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

• How can I fix my msconfig so that the system will work? error: "Windows cannot find 'msconfig'.

  When I go into run and type msconfig, I get the following message.

  "Windows cannot find 'msconfig'. Make sure you typed the name correctly and then try again. to search for a file, click the Start button, and then click search. »

  Only three names came when I ran the search.
  1. msconfig in C:\WINDOWS\Help
  2. MSCONFIG. EXE in C:\WINDOWS\Prefetch
  3 msconfig in C:\WINDOWS\pchealth\helpctr\binaries

  Hello

  Thank you for writing to Microsoft Communities. I understand that you are unable to open msconfig on the computer.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  1. what operating system is installed on your computer?

  2. have there been recent changes to the computer before the show?

   

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Rof the United Nations [System File Checker] SFC scan on the computer that would be a search for system files corrupted on the computer and replace them.

  For Windows 7 and Vista: http://support.Microsoft.com/kb/929833

  For Windows XP: http://support.Microsoft.com/kb/310747

  Method 2:  Also try to scan your computer for the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please follow these recommended steps and post if you still experience the problem.

• Windows cannot find updatetool_cs13_ws_ver2_30_000.exe

  When I run Lenovo System Update (on my Pad T440s thinking), I now get an error message:

  Windows cannot find updatetool_cs13_ws_ver2_30_000.exe

  Indeed, Ccleaner has indicated that the file is missing here:

  C:\ProgramData\Lenovo\SystemUpdate\sessionSE\Repository\fwdphb06\

  This folder contains now only two files, fwdphb06_version.exe and fwdphb06_2_.xml (see below).

  What can I do to fix this error? Is how important it?

  
  

• Windows cannot find C:\Docume~1\owner\Locals~1\Temp\dwm.exe

  I get the following error at startup: Windows cannot find C:\Docume~1\owner\Locals~1\Temp\dwm.exe

  Once I click ok, I get the same error message, but it says it could not load or run it from the registry.

  In addition, I can not get on the internet on my PC. I can access the internet fine on my laptop through y network.

  I read how to solve the error message, but I can't get on the internet to access programs. Suggestions? I'm so frustrated!

  Thanks in advance!  :)

  Steve Winograd's right - no executables are normally launched from the Temp folder where you specify unless the malware put them there.

  Your system is currently or has been infected and perhaps your detection/removal software clean the folder Temp of the suspicious content but this process does not always boot entry that points to the location/suspicious file, so that each reboot (or login), he wants to run it.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  It is easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem simply remove the startup message.

  I would recommend also you start to search in the register, unless you have a backup because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom, but may not actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
  !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove
  .  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Windows cannot find the pictur error ~ 1.exe

  Windows cannot find pictur ~ 1.exe error, when you click ok then pictur ~ 2.exe cannot be found, and then click ok and imagev ~ 1.exe is not found. Happen sporatically throughout the day and the error messages inspire each other to end up with dozens of the same error message in the task bar. There is no pictur ~ 1.exe in msconfig. You need to determine how to make this error go away, or which is looking for this program, or to all the less determine where it is sought.

  Although I always think you should ask the help of expert antimalware, if you want to dig a little deeper on your own, here are 3 ideas, neither has no guarantee of success:

  1. take a look in the event viewer (start > run > eventvwr > OK) and see if error messages are displayed that give the name of the routine which tries to launch these exe files.

  2. learn to use the process monitor (and, perhaps, Process Explorer).  These are powerful tools, and the learning curve is a bit steep.  I can't help you here.  See the links in the sidebar or the other of the two pages linked above.  You can start by watching the video here.

  3. in association with the use of Process Monitor, create an exe file with the name that appears in your error message and save it in a folder that is in your path (for example, C:\Windows).  You can make a copy of an existing such as Notepad.exe exe file and rename it to picture ~ 1.exe or create an exe of your own by using a tool like ExeScript.  If you get real ambitious, you might learn a little windows script (for example, this tutorial) and have your exe file displays the name of the process that called it (again, to help you with this is beyond my skills).

  If you try one of these ideas and are able to go to the bottom of your problem, please post back with the details so that others (especially me) can learn.

• After download of Internet Explorer 8 I can't open all the icons in the control panel. On display is come information that Windows cannot find 'C\WINDOWS\system32\rundll.32.exe '.

  Dear Sir/Madam,

  Yesterday, I downloaded Microsoft Internet Explorer 8 web from Microsoft Download Center.

  After downloading Microsoft Internet Explorer 8, I can't open any icons in the control panel.

  On display is come information that Windows cannot find 'C\WINDOWS\system32\rundll.32.exe '.

  Help, please. Thanks Gene.

  Thanks Gene.

  Dear: :

  Running sfc/scannow will not replace the missing rundll32.exe file.

  Why you post methods that do not work and will be just wasting time?

  Hove you never even seen this problem before, tried to recreate it so that you can actually see, or have you never really fixed?

  Why you learn not what sfc/scannow does and does not do?

  Here is a simple test to you and all your colleagues in the technical support engineer:

  Rename or delete just your c:\windows\system32\rundll32.exe file is "missing".

  Rename rundll32.exe---> rundll32.xxx

  If you started normally, before you can blink, the 'missing' rundll32.exe file quickly and quietly replace the copy in the dllcache folder.  It is the Protection of Windows file in action and you will see something like this in the Event Viewer log system:

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64002
  Description:
  File replacement was attempted on the protected system file c:\windows\system32\rundll32.exe. This file was restored to the original version to maintain system stability. The file version of the system file is 5.1.2600.5512.

  I beg you to perform this simple test to know how the sfc/scannow:

  Boot your system to Safe Mode or the recovery for the Windows File Protection Console does not run.

  For this example, we will use the system critical file rundll32.exe.

  Rename or delete your c:\windows\system32\rundll32.exe.exe file so the file is now "missing."

  A critical file, is it true?  It is on the list of the file 3498 knows the Protection of Windows and SFC files, but now he isn't.

  If Windows File Protection is running, the "missing" file would be quickly and silently replaced (try to rename or delete it in normal mode and it will be quickly and quietly replaced).

  Now, with your file rundll32.exe missing, start in Normal mode and try to use something like control panel to open something like Power Options and you'll see that familiar message:

  Control Panel
  Windows cannot find 'C:\WINDOWS\system32\rundll32.exe '.  Make sure you typed the name correctly and then try again. To search for a file, click the Start button, and then click search.

  Now you have recreated a common problem with the missing file and seen the error of our own eyes.  A Microsoft Support Engineer will usually suggest running sfc/scannow for this kind of problem, but it will not work or help and you can prove it to yourself, and now you have reproduced the error.

  You follow own advice and run sfc/scannow to the end.

  The rundll32.exe is always had disappeared, right?  Did run sfc/scannow replace the missing critical system file?

  How can he be so sfc/scannow is supposed to replace the missing system files?  This is because it is not this that sfc/scannow does.

  Now you know sfc/scannow does not.  He did not replace your missing system file (don't forget to put your rundll32.exe back so you will have a).

  Now, go to c:\windows\system32\dllcache and delete or rename the file rundll32.exe from there - and it will be gone and not replaced automatically because the Windows File Protection does not seem after this record.

  Run sfc/scannow in full again.

  Replace the file rundll32.exe missing in the dllcache folder, since it handles missing files (not the system32 folder) IS the folder that sfc/scannow.

  Now you know sfc/scannow does.

  Do you need help to know too much about the corrupt system files?

  Since most people do not have a genuine XP bootable installation CD, they will not be able to develop a copy of the file that is missing from the installation CD, they have not.

  After some directions on how to replace the file when the user has no XP bootable installation CD authentic and that will be useful to all.

  If you don't know how to say "I don't know how" and I'll help you.

  You want to inform/warn the poster that SP3 is installed that running sfc/scannow will take a long time for the installation of SP3 CD?

  If you do not have a CD with the same Service Pack as your installation (most people don't), the posters are in for a rough and frustrating time.

  Of course this will help with the detachment of the Ministry of Education of the impossible to try things that don't work, but I thought I'd throw it out there for the 100th time.

• I am trying to install a driver for my sound card to a file and I get a message saying that windows cannot find the file acmeauvist.exe. What is the path?

  How can I fix a windows cannot find cmeauvist.exe problem?

  I found the problem. I tried to install it from the zip file, I need to decompress the file and then install it.thanks

• Windows cannot find c:\update.exe. Make sure you typed the name correctly and try again.

  Two days ago at startup only, I started to get the error message "Windows cannot find .exe c:\update.".  Everything seems to work ok and my antivirus is not a virus, its boring and I'd love to delete the message.

  Hello

  These should help you to find and remove this entry.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• I have the Windows cannot find C:\WINDOWS\system32\rundll32.exe problem and I do not have my disk

  I have the Windows cannot find C:\WINDOWS\system32\rundll32.exe problem and I do not have my disk

  Hello

  • When you receive this error message?
  • What were the changes made before the issue started?

  Try the SFC scan on the computer.

  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Error 'Windows cannot find c:\windows\system32\control.exe' when you try to start Control Panel.

  Original title: windows cannot find c:\windows\system32\control.exe

  Using Windows Vista 32-bit SP2. I get the message: windows cannot find c:\windows\system32\control.exe when you try to start Control Panel. I have to solve as soon as POSSIBLE

  Hello

  1. What is the brand and model of the computer?

  2. What is the security software installed on the computer?

  3. have you made changes on the computer recently?

  Method 1.

  Start the computer in safe mode and check.

  Start your computer in safe mode: http://windows.microsoft.com/en-SG/windows-vista/Start-your-computer-in-safe-mode

  If you are able to open in safe mode control panel, and then start the computer in a clean boot state and check.

  Affecting system boot minimum state helps in the identification of third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2.

  I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Method 3.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  I hope this helps.

• Impossible to recover the OS - windows cannot find c:\windows\system32\SYSPREP\WINDVD\b28763aa.exe

  original title; trying to recover using recovery discs auto and am get error as follows:

  towards the end when he goes into "final configuration" the next upward:

  Windows cannot find c:\windows\system32\SYSPREP\WINDVD\b28763aa.exe

  Any ideas how to solve this problem?

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

• Windows cannot find C:\WINDOWS\system32\rundll32.exe error message

  original title: I still need help... help please! Windows cannot find C:\WINDOWS\system32\rundll32.exe

  Hello, I have windows vista and when I try to open certain programs, like Adobe or change the time in the control panel............... etc... the computer says... error loading Rundll specified module could not be found or Windows cannot find C:\WINDOWS\system32\rundll32.exe.   I looked at the website of the doug knoxs, but all the EXE patches are for XP and it would not have worked... im a little stuck... What can I do?

  I tried running a scan in command line but it does not help... affecting its programs to update like spotify and adobe and I can not change the settings of the clock...

  any ideas...

  Thank you
  Ollie

  Hello

  Rundll32 errors can be caused by malware.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

• Error message after you initialize computer error "Windows cannot find C:\Program Files (x 86) \Search Extensions\Client.exe make sure you typed the name correctly and try again.

  After that I turned on my computer, I get this error message... "Windows cannot find C:\Program Files (x 86) \Search Extensions\Client.exe make sure you typed the name correctly and try again."

  It all started October 1, 2014, and I have no idea why.

  I asked windows assistance online, and he said he had something to do with my registry.
  But then there just stop communicating and did not tell me how to solve this problem.

  Y at - it a registry repair tool?

  Also it does not affect my computer that I can tell.

  But I have a problem in which windows cannot detect.

  In the printers and devices window, the icon of my computer has a triangle with an exclamation mark inside error.

  Maybe someone out there not and I'd appreciate any help.

  Hey, mark

  First have you properly uninstalled this program? He was executed at startup of Windows an incorrect uninstall may cause this error may still be registered in MSConfig to start automatically with the computer.

  Did you go to the address specified in Program Files (86) \Search Extensions to see if the file is present or not?

  With a mark of exclamtion in the middle of a yellow triangle indicates that drivers must be updated.

  Right-click on the device with the triangle, select Properties, go to the Hardware tab, select the device with a triangle next to it, select Properties again and select Update driver.

  This should solve the problem, if Windows Update can't find a driver for you, you can always go to the manufacturers website and download it there, however, if the Windows Update does not find it there ' has a chance to the manufacturers Web site may not it as well, in this case, you can open Device Manager right-click the missing material or using outdated drivers, select Properties, go to the Details tab and in the hardware id select menu drop-down property search with id, you receive information about the device and so download the drivers the most up-to-date and appropriate from other reliable sources.

  Thank you

  -Robin

• Windows repeated error "Windows cannot find C:\Users\HP\AppData\Local\Temp\Install_30150\ins_sm.exe".

  Hi all

  I have a Windows 7 pc. Several times a day, an error message appears which States:

  "Windows cannot find C:\Users\HP\AppData\Local\Temp\Install_30150\ins_sm.exe. Make sure you typed the name correctly and then try again. "

  Changes in number (i.e. 30150) to each new error message.

  When I go into the Temp folder I find empty files called Install_30150, Install_21338 etc. I don't really know what makes these records and which try to run an executable file in them and finds that they are empty!

  Could you please help?

  Thank you very much in advance

  Angeliki

  (Moved to programs)

  Hi Elise,.

  The Temp folder in the location you can get the error is temporary. It stores temporary data when you access a Web site or when you download a file. You can delete this folder. Select all the files in the Temp folder and delete it.

  Let us try to check if you are facing this problem because of any third-party application. Attempt to start the clean boot of your computer state. To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Please refer to the section: How to reset the computer to start normally after a boot minimum troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

  Let us know the status of this issue.