Windows couldn't start T__T...

Similar Questions

• In XP, error at startup 'Windows couldn't start. A recent hardware or software change might be the cause.

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your Windows installation disc and restart your computer.

  2. choose your language settings and thenk click 'next '.
  3. click on "repair your computer".

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Windows\system32\winload.exe

  State 0 xC0000001
  Info: The selected entry could not be loaded because the application is missing or damaged.

  But, instead of file: \Windows\system32\winload.exe I get file: \$Windows.~BT\windows\system32\winload.exe.
  

  Hi imranhussain1979,

  ·         You have made any changes recently?

  ·         When it was working fine?

  ·         You have Windows XP or a later version of Windows?

  Step 1: The error seems to refer to a later version of Windows. Restart the computer and check if the installed operating system.

  Step 2: Try to start the computer in safe mode and check the number.

  Start your computer in safe mode

  Microsoft Windows XP: start the computer in safe mode

   

  Respond with more information so we can help you best.

• Boot Manager Windows couldn't start?

  I have an advent netbook that is not a hard drive. my laptop suddenly stops while I use it and when I turn it on it says that you cannot start Windows. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer. (I CAN'T DO THIS BECAUSE I HAVE NO DISC DRIVE IN MY NETBOOK)
  2. choose your language settings, and then click "next".
  3. click on repair your computer.
  File: \Boot\BCD
  Status: 0xc000014c
  Info: An error occurred trying to read the boot configuration data.
  I'm not a very experienced user and I don't have any idea what to do!
  any help? THIS IS URGENT.

  Hi Emma,

  ·         You have Windows XP or Windows Vista/7?

  Check to see if the following is useful.

  Method 1: Try to start in last good known Configuration and see if you can start very well.

  Using the last good known Configuration - Windows Vista/7

  How to start your computer by using last good known Windows XP Configuration

  Method 2: Note: Check if you have the repair your computer option in the advanced boot menu.

  If you do, perform a startup repair, check to see if it helps. (For Windows Vista/7 only)

  Startup Repair: frequently asked questions - Windows 7

  Startup Repair: frequently asked questions - Windows Vista

  Respond with more information so we can help you best.

• I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it.

  * Original title: reinstalling Windows Vista

  I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it. I restarted my computer, press the F12 key and selected boot from cd/dvd, but the computer still started in windows. My computer is Dell. If there is no solution, it is possible to reinstall windows without using the disc?

  Hello

  Here are the options of relocation:

  How ro reinstall from the Dell recovery partition:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

  Reinstalling the printer Dell supplied disk:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_339949

  ______________________________________________

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Windows Mail just started to duplicate my incoming e-mail messages (perhaps too outgoing). I couldn't find a solution in respect of the aid. Any ideas?

  Windows Mail just started to duplicate my incoming e-mail messages (perhaps too outgoing). I couldn't find a solution in respect of the aid. Any ideas?

  Check that you don't have 2 copies of the account specified under Tools | Accounts.  If this isn't the issue, then its likely the database has been corrupted.  Try to remove your e-mail account, and then compact and repair the database (www.oehelp.com/WMUtil/) and then add your account again.  Also, make sure the antivirus software is not interfering.  See www.oehelp.com/OETips.apsx#3

  Also, my OEX program (www.oehelp.com/OEX/) will remove the duplicate messages.

  Steve

• Windows search service couldn't start. The system does not have the specified path. How can I fix it?

  I'm having a problem where IE takes up to five minutes for a web page.   I see the mistake of follow up in the event viewer:

  Log name: System
  Source: Service Control Manager
  Date: 14/08/2012 21:14:10
  Event ID: 7000
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Owner-PC

  Description:
  The research service Windows could not start because of the following error:
  The system does not have the specified path.

  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event ">"
   
     
      7000
      0
      2
      0
      0
      0 x 80000000000000
     
      391647
     
     
      System
      Owner-PC
     
   
   
      Windows Search
      %%d Ko
   
  

  When I run the program Microsoft FixIt Center I get 3 error messages that do not reach the difficulty.

  ---------------------------------------------------------------------------------------------------------

  (1) Windows Search is crashing or not fixed failing

  Windows Search crashes or breaks down after that that she has started.  In addition, an event ID 7042, 100 or 1000 is logged in the Windows event log, or the Windows Search Service is not running.

  (2) search Windows does not start and gives an error message no fixed

  Windows Search does not search results show and there is an error at startup.  A 3024 or event ID 1006 is logged in the Windows event log, or the Windows Search Service is not running.

  (3) Windows search shows no results not fixed

  Windows Search shows no results.  In addition, an event ID 7040 is logged in the Windows event log, or the Windows Search service is not running.

  ---------------------------------------------------------------------------------------------------------

  Someone at - it solutions?  Oh, I'm running Vista 32 Home SP2

  Thank you

  Hello

  Did you change to the computer?

  I suggest you to see the links and check.

  The problems with the search

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-searching

  Improve Windows searches using the index: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/improve-Windows-searches-using-the-index-frequently-asked-questions

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

• Windows could not start HomeGroup Listener

  Windows could not start HomeGroup Listener on. Local computer. For more... the 2147023817 service-specific error code. I also have a problem with the provider of the home group. . I tried almost every thing. .. .i can join the Group of home. Thank you

  Don t think it has something to do with the Toshiba laptop.
  It looks like more because of Microsoft.
  Found this discussion in the Microsoft forum:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/thread/453c3e1d-A980-417C-a6e6-d4c5c1af79a1

  _Someone wrote there: _

  + For those of you who could not startHomeGroup service listener and HomeGroup provider to ensure that these services are started and set to automatic: +.

  +-Function Discovery Provider Host +.
  +-Function Discovery Resource Publication.

  + (Activate in the following order): +.
  +-Peer Networking Identity Manager +.
  +-Peer name resolution protocol.
  +-Peer Networking Grouping +.

  + If these services are disabled this is maybe the reason why you couldn't create a homegroup. +

• I can't install it last update for itunes on my pc. When I try and download it and it's over, he said, "Apple mobile device service couldn't start. Check that you have sufficient privileges to start system services. »

  I already tried uninstalling and reinstalling several times and that does not work, I simply get the same result.

  I start to download, through all the steps and when it is ready to be finished install it says in a pop-up, "Apple mobile device service couldn't start. Check that you have sufficient privileges to start system services. »

  Right-click on the downloaded installer and use run as administrator.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Dual Boot with windows XP Pro with 2 HARD drive, error on secondary windows install: "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check boot path and disk hardware... »

  Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)

  Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.

  My Boot.ini file at this time was:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I looked towards the top of this help page, but for now I'm unlucky:

  http://support.Microsoft.com/kb/314477

  (The next steps I took by throwing from the Windows CD and go into the repair console)

  I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.

  He gave me something like:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).

  I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".

  I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.

  I've also marked the partition on the D: as active (in computer management), but it did not help me.

  I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...

  My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?

  Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx

  Could a clean install two HDD help? I hope I won't have to do...

  Someone has an idea?

  PS: I'm not such an advanced user so I need a solution step by step, thanks!

  Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.

  Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...

  In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).

  In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html

  (except I've had the first installation already done).

  Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.

  EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!

• Windows Vista loop start

  Hello

  I went to a laptop on a field, but was pressed and thus check/didn't know not it is Windows Vista Home Premium. After it is joined to the domain and click the restart now button the laptop restarts. Unfortunately, Windows is not started, instead, goes into a boot loop :(

  Even if I try to press F8 during and after the POST, nothing happens.

  Is there a way I can recover from it without having to reinstall? I have important files that have been supported until as such desperately need to keep?

  One thing that I was wondering was if it is possible to slave the drive to the laptop via a SATA converter USB on another computer and just change (or remove) a file that is the cause?

  Looking forward to your response (s)

  Thank you

  Sie

  Hi Bill

  Thanks for the reply. Unfortunately, none of the solutions were applicable I couldn't the laptop to display different slow startup options or any speed I typed F8.

  Instead, I hit the F10 key and entered the recovery partition. A GUI gave me options to first save the files and then do a reset system by which is reinstalled Vista.

  This solved my problem and the laptop works well again.

  Thanks a lot for your help and advice!

  Concerning

  Sie

• Windows did not start; Status: 0xc000000f

  my windows vista couldn't start, citing the following path of missing or damaged file:

  File: \windows\ststem32\winload.exe

  Status: 0xc000000f

  I then followed the instructions and used the installation cd, chose the time settings and language etc, got for options recovery system and selected the Startup Repair, only to get the message "windows cannot repair this computer automatically.

  Oh, and for some reason any I can not at all in safe mode.

  Hello

  You can check this link and try Method 3:
  http://support.Microsoft.com/kb/927391

• Windows could not start the service on the Local Computer Security Center. Error 1068: The dependency service or group could not start

  I use Windows 7 Home Premium

  My windows Security Center cannot be started. I spent to the Microsoft Management Console and tried to launch security through Services Center, but when I do I get the following message is displayed:

  "Windows failed to start the service on the Local Computer Security Center.

  "Error 1068: the dependency service or group could not start"
  Help, please.
  Thank you.

  Hi Rohit Chettri ,

  (I am not good in English)

  I am trying no operation troubleshooting you mentioned. I have it set for myself.

  I clicked on something related to the denfence in the heart of the action and when I restarted my computer is off almost all services. I couldn't even connect to the internet

  I went to the Configuration System (msconfig)-> services-> active tab all services and restart. After that my computer works normally.

  In any case thanks a lot Rohit Chettri.

• Windows could not start during windows installation

  Recently, I had a number of issues of windows 7 on my computer with other things and I decided that it would be appropriate to do a complete reinstall of windows 7. I plugged my windows 7 installation cd and went to the installation. I deleted the partition of hard disk OS to remove my broken version earlier Windows 7 and made a new partition to install my new windows 7. I've been installing windows 7 and he said that it might take to restart my computer several times to complete the installation. The problem is that when it restarts, it is not actually proceed with the installation. Instead, it immediately opens a window of windows error recovery in the BIOS. The description is "windows did not start. A recent hardware or software change might be the cause. To solve the problem: 1. Insert your windows installation disc, and then restart your computer. 2. choose your language settings, and then click Next. 3. click on repair your computer. "I then followed the instructions but when I did the repair your computer option, I tried but it says that this startup repair couldn't fix it automatically. I then tried to reboot in safe mode, and he went to the installation screen of windows as if he was about to continue installing windows, but then he said that I was in safe mode and I had to be in normal mode to continue the installation of windows 7. So now, I have only a part of windows 7 is installed.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

• Bootcamp partition Windows will not start since WinUpdate

  I'm working on a MacMini (mid 2011) on which a bootcamp partition has been installed. I had to work on windows update etc...

  So I did update from our wsus server, and then restart Windows, windows no longer starts. There was a line of white underscore flashing on a black screen.

  I tried to see if the Mac partition (10.7) was able to start. It has been altered too, but I was able to reinstall it.

  __

  on windows, I followed these instructions: https://discussions.apple.com/thread/4936761?tstart=0

  To do this, I created a USB bootable key WIN10 (regardless of the Version of the OS in this case), I started on it to access the repair menu. Here, I opened the CMD and had results of the thesis:

  
  x:\sources>cd c:\ 
  
  x:\sources>Bootrec.exe /Fixmbr 
  
  Operation succeed 
  
  x:\sources>Bootrec.exe /FixBoot 
  
  Operation succeed 
  
  x:\sources>Bootrec.exe /RebuildBcd 
  
  Number of windows installation identified : 1 Add the installation to boot list ? : O 
  
  Asked System Device not found. 
  

  I assumed it was due to drivers for windows compatibility. (something like record of $ $WinPEDriver), but no idea how to put them on my bootcamp partition, previously never worked with bootcamp.

  I should also mention, I tried a classic Windows repair, he told me that my windows partition has been locked. I assumed it was a problem of version of bootcamp. I've updated everything on my mac partition, but he found no update for bootcamp. Right now I'm preparing a bootable usb key with both 'iso' and 'windows compatibility modules' activated with bootcamp assistant.

  I don't know when it happens, but now, when I try to boot on my bootcamp partition, there are only blackscreen (not slider more). But also, my screen flashes as if he finally gets the signal just before the black screen.

  I need your help for:

  -Fixed problem starting Windows partition, OR...

  -Give me a way to get the activation key for the license of the installed windows (without starting it (if it exists)), so I can reinstall it correctly.

  Thanks for the kind help and forgive my bad English.

  Please after the release of the following OSX Terminal commands.

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

  What version of Windows?

  DiskPart should be used to clear the readonly attributes.

  Bootrec.exe must be used that on C:, otherwise it is written to X:. CD C:\ should be replaced with C: only if you are on the C: drive.

  If you run Diskpart, please after the release of

  list disk

  partition from the list

  the list volume

• Does not begin with satellite U840-110 - Windows 7 - loop start-up

  Hello

  I have been using a Satellite U840 - 110 portable since dec 2012 on a Windows 7 Home Premium operating system. Recently, the laptop was left in standby for a few days. When I tried to start the computer, it froze at the start. So I forced reboot by pressing the power button. After repeating this for a couple of times, he first showed a blue screen. Then, when the computer has been restarted, he showed a black screen with the following message

  "Windows error recovery".
  Windows could not start. A recent hardware or software change might be the cause.
  ...
  ...
  Run the Startup Repair tool or
  Start windows normally'

  I have tried both these options multiple times and every time at the end of the process, he might come back to these same screen. I also tried to press F8 and used advanced and tried Boot Options "not last know good configuration."

  None of this seems to work and I was not able to load Windows. I don't have a backup of my data and can end up losing a lot of vital information.

  Is there anyway I can solve the problem and get the computer to work again?

  Is it possible to recover data from the hard drive.

  Thanks in advance for the help!

  Is it possible to recover data from the hard drive.

  You can remove the laptop HARD drive and could connect to another computer using USB-to-SATA cart.

  After that, you could insert the HARD disk into the laptop new and could try to perform the Toshiba HDD recovery.
  (F8 - fix my computer - Toshiba-HDD recovery)