Windows does not start and color distortion

Similar Questions

• Virus on Windows, does not start and he said: no operating system or it is corrupt

  Original title: help please

  I have a laptop with windows vista. Apparently, someone in the House caught a virus.  now windows will not start and he said: I have no operating system or it is corrupted. can not even boot in safe mode or anything.  says windows error recovery screen when turned on.  any help is appreciated.

  Hi Lawry206,

  You can try the following steps and check if it helps.

  Method 1: Disconnect external devices attached to the computer and restart to check the issue.

  Method 2:

  Since you are unable to start the computer in safe mode, you try to perform a repair to start the Windows recovery environment (WINRE Mode) and check if it helps to solve the problem.

  You need start from your Installion of Windows Vista disc.

  If startup repair does not help, then try a restore of the system of the WINRE Mode and check.

  You can see the following link for more information.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• What can I do if Windows does not start and system repair will not work

  Original title: pc does not start. blue screen says driver overtaking has a stack buffer and of physical memory dumps. repair of the proven system and also the restoration of the system. still no luck. Help please! Jane.

  Blue screen flashes off pretty quick so cannot read all of it. It says problem can be installed recently ware. don't the have not installed anything. Since regular programs.

  says a malicious attempt can occur. that security essentials update installed.  Windows system repair ran several times and said that he could not fix pc. Just tried restoring the system to the 22/10/11, which said it was successful, but still have the same problem. Don't know what to do now that not that computer savvy!

  Hello

  Did you do changes on the computer before the show?

  Method 1:
  You can disable automatic reboot system Advanced Start Menu fails to capture the error message and check if it helps.

  Method 2:

  You can start the computer in safe mode and check if you are able to start
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 3:
  If you are able to boot into safe mode, then perform a clean boot and check:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

  Method 4:
  You can perform system restore and startup using Windows vista DVD repair.

  What are the system recovery options?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• What should I do if my windows does not start, and the Startup Repair is not help at all

  So today, I went and when I turned on my computer from sleep mode, it was perfectly fine.  I was watching a video, surf on internet and MSN messenger when my computer froze all of a sudden.  I waited for release, but it didn't.  Given that I could not turn off the computer either, I had no choice but to disconnect it from the computer.  However, later, when I tried to restart, the screen would go black after the black loading screen.  Subsequently, it would just restart and startup repair would begin.  I tried to restore Systen and ran several times startup repair.  In addition, it does not even boot mode safe.  Here are the details of the problem for the Startup Repair:
   
  Problem event name: Startup repairV2

  Signature of the problem 01: AutoFailover

  Prob Sig 02: 6.0.6001.18000.6.0.6001.18000

  Prob Sig 03:5

  Prob GIS 04:393220

  Prob Sig 05: NoRootCause

  Prob Sig 06: NoRootCause

  Prob GIS 07:0

  Prob GIS 08: 1

  Prob Sig 09: SystemRestore

  
  Prob GIS 10:0

  OS version: 6.0.6001.2.1.0.256.1
  Local ID: 1033

  Please help me find a way to restart the computer without having to reinstall Windows because I don't have a back-uped none of my files, so I would lose everything...

   
  Thank you
  Jeremy

  Hello

  ·         How have you tried to do system restore?

  I recommend you to restore system using a Windows Vista DVD.

  Here's how:

  To open the Options menu system recovery using a system repair disc or a Windows Vista installation disc

  If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the Windows Vista installation disc or a system repair disc previously.

  To use this method, you need to restart (boot) your computer using the disk.
  1 insert the disc.
  2. restart your computer using the power button on the computer.
  3. If you are prompted, press any key to start Windows from the installation disc.
  If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer.

  4. choose your language settings, and then click Next.
  5. If you are using the Windows installation disc, click on repair your computer.
  6. Select the Windows installation you want to repair, and then click Next.
  7. in the System Recovery Options menu, click a tool to open it.

• After installing Lightroom 10 CC 2015, Photoshop CC 2015 windows does not start and Illustrator CC 2015 freezes after startup. It look like that the program (or maybe add ons) need to dll of the CC + 2008 with isn't so more recordable in Windows 10

  Has anyone have the same problem and maybe a Solution?

  Hey mksuperplus,

  Please check this link Windows 10 update breaks Microsoft Adobe CC - missing - MSVCR110.dll community for the solution.

  Kind regards

  Nicos

• After installing Windows XP service pack 3, Windows does not start not upward and only able to boot mode safe

  After installation of service pack 3 I try to restart the computer, but I am sent to the screen that allows only "SAFE mode", safe mode with network, etc... Start up.  Windows does not start normally.  Also during the instalation it won't save the backup files msadds... file inetwiz... file inetwiz...

  Hello

  · You receive an error message or error code when you try to start in normal mode?

  · What is the number and the model of the computer?

  Follow the steps below and check, if it helps:

  1 uninstall windows XP service pack 3 from your computer, you can check the link below: how to remove Windows XP Service Pack 3 from your computer: http://support.microsoft.com/kb/950249

  2 start the computer in normal mode, and then install service pack 3 on the computer. Before installing service pack 3 see the link that has steps to take before you install Windows XP Service Pack 3 below: http://support.microsoft.com/kb/950717

• my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem. __

  my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.

  Try to restart your machine and pressing F8 before the spash screen Windows appears.  Choose the option "last last known good configuration".

  If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.

• my windows firewall does not start and I get a erroe code 5, can someone help me

  my windows firewall does not start and I get a erroe code 5, can someone help me

  Hello

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  Method 1.

  To resolve this problem, click the fix button of this article to diagnose and fix common Windows Firewall problems automatically.

  Some services start not in Windows Vista and Windows 7: http://support.microsoft.com/kb/943996

  Method 2.

  Automatically repair the settings of Windows security to secure your PC: http://support.microsoft.com/mats/Malware_Prevention/

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

  For Windows 7: back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I hope this helps.

• Windows does not start at startup

  Hello

  Windows does not start at startup, how? "Safe mode or the other).

  Hello

  Are you able to put the laptop press F8 and choose fix my computer?
  If this is not the case, take your recovery disk and try to reinstall the Windows operating system using the recovery disk!

• Equium M40X: I get to the banner of Toshiba, but Windows does not start

  When I start my 2 year old Toshiba Satellite M40X, I get to the banner of Toshiba, but Windows does not start. I tried using the recovery CD and it does not either.

  Any suggestions as to what could be the problem?

  Hello

  What do you mean with the banner of Toshiba? Did you mean the Toshiba splash screen that appears at the begging of the boot?

  Equium M40X successfully passed this screen?

  If the laptop is unable to switch to the home Toshiba screen then I presume that the BIOS has detected a hardware problem.
  In this case primarily the motherboard fails

  But if the laptop is able to spend the Toshiba start screen, the motherboard must be ok and only a 3rd device malfunction as HARD drive could cause this problem.

  Try to study a little

• drive Windows does not start a cd or dvd. it keep said to incert cd after I insert it

  drive Windows does not start a cd or dvd.  it keep said to incert cd after I insert it.  It can not read the cd or the dvd to start.  I rip, but it tells me to put it on cd.  I made a full recovery but still does not.  I have a Lenovo all-in

  Hi Kenneth,

  1. are you able to read files with another player?

  2 have you made changes to your computer recently?

  3. from when are you facing this problem?

  4. what operating system is installed on the computer?

  I suggest you follow the method and check if it helps.

  Follow the link and check if that helps.

  Your CD or DVD drive cannot read or write media

• Windows does not start after the update...

  Hope someone can help with this,

  I just installed the update sp1 for my computer for Windows Vista Premium Home dir all installed with no problems, but when I restarted my pc, Windows wouldn't start. The only thing that is on display is a black screen with Windows Error Recovery on top, then he said "Windows does not start. A recent hardware or software change might be the cause. I tried to restart it in different ways, but nothing. Then he said: I have to insert my OS drive to try to fix, but that's not even start. Everyone knows about this problem? This has happened right after that I installed the update...

  L.Butler,
  Are you able to boot from your Vista DVD or recovery partion and run the Startup Repair tool?  If you do not have a Vista disc so make sure that your computer is configured to boot from the CD drive before booting from the hard drive.  Once you start with support for Vista select the "Repair your computer" option and first run "Startup Repair".  If that is not correct the problem then boot with Vista support and select the option "System Restore" and choose a date prior to the update install.
  Once you are able to boot normally again, then I suggest that you are looking for virus\malware.  SP1 was released in April 2008.  So if you install earlier means there may be other problems on your system.  If you have a backup of your current personal data then I recommend to do a clean restore to install\factory.  Then immediately install antivirus software, and then do all Windows updates before installing other software. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• IdeaPad Y530: windows does not start after that laptop went to sleep mode.

  Hello

  More great frustration in my life have laptop brand new, this for me.

  After that the laptop goes into mode 'sleep', I'm not able to go back to Windows. All light are there and watch as usual, but there is no Lenovo Welcome logo or any other sign of normal behavior. I can turn it off by holding the button market / stop, but when I turn back the problem is still there. Windows does not start.

  I was able to go back to Windows that day after leaving just laptop without any power and battery.

  I called Lenovo and they suggested to disable the standby modes use put into hibernation. I did it. When the screen saver started, something went wrong, computer got froze and I had to restart, but then again, black screen and no reaction.

  Anyone have any ideas?

  Thanks for the reply.

  That's what I end up doing. OnKeyrecover does not work either so what spoke on the phone with Lenovo. Then he is gone now for repair.

• My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM.

  My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM. It is said it can be repaired by using the original installation CD, but we do not have. Any ideas please?

  The file is missing or corrupt is one of your files in the system registry.

  By far, the best way to recover from this is to go to another computer and create a free Hirens Boot CD.
  Download Hirens: <> http://www.hirensbootcd.org/download/ > (link at the bottom of the icon of the disk)
  Hirens CD burning <> http://www.hirensbootcd.org/burning/ >

  Once you create the CD, and then start your system of problem with this CD.  In the first window, select "Mini Windows XP" and wait for the system to start.  When it starts, go to the Hirens Boot CD menu and select
  Register-> Registry Restore Wizard.
  then follow the prompts.  This wizard will return a copy of your registry database from backups that are stored with your system restore points.  After the restoration, stop, remove the CD and restart.

  When you start your system, it is recommended to perform a system restore operation to ensure the consistency of your system
  "How to restore Windows XP to a previous state"
     <>http://support.Microsoft.com/kb/306084 >

  Also, this error is almost always accompanied, if not caused, the corruption of the file system.  Also a good idea to perform a check disk (chkdsk) operation with the option "repair".
  "How to perform disk error in Windows XP check"
     <>http://support.Microsoft.com/kb/315265 >

  The hard way to get back is covered in the following Microsoft KB article, but if you have installed a large number of service packs for your installation of XP, I don't give you many chances to get past part 1. (And there's also an installation CD to access the Recovery Console)

  "How do I recover from a corrupted registry that prevents Windows XP boot"
    <>http://support.Microsoft.com/kb/307545 >

  HTH,
  JW

• Windows does not start successfully - only in safe mode.

  I have a 3200 HP with XP Home Edition. Windows starts only in Mode safe when I download Service Pack 3. Is there a way to fix this without doing a complete restore of the system.  I've been running without SP3 because I knew of this issue. Recently, it has been downloaded and now Windows does not start successfully.  Only in Safe Mode.   When I discovered this problem, I was able to fix it, but can't remember if it was fixed without doing a complete restore of the system and starting over.

  Required reading:

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c01457284