Windows error 1073 usually stop or restart

Similar Questions

• Get the message when running Norton - OS file system error (C :), advised stopping and restarting,)

  Original title: what is system problem Partition OS operating system error (C :) file)

  get the message when Norton - OS file system error (C :), recommended stop and restart running, did not help)

  Hi catherinegood,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem? Hope this information is useful.

  This is error occurs when Norton scan, then you can check with Norton and check:

  Check the link for the support of Norton:

  http://securityresponse.Symantec.com/Norton/support/contact/contact.jsp

  http://www.Symantec.com/support/index.jsp

  If you try to run a scan, you can check out the following link and try to download the Microsoft Safety Scanner and analysis complete on your computer and check.

  Note: When you perform the analysis, there are risks of data loss you can take a backup of important data before performing analysis.

  Check out the link:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Hope this information is useful.

• in windows 7 windows live mail can stop and restart when I try to convey whatever it is

  Windows live mail can stop and restart when I try to convey whatever it is

  Hi 428Tom

  For support with Windows Live Mail, please address your question to the forum Live Support from the link below. Thank you.

  http://windowslivehelp.com/

• Recently installed Windows 7 now cannot open any games Big Fish when I try to open the game get error message computer stops and restarts

  Cannot open the computer game stops and restarts

  Check that the Big Fish Games support the site http://bigfishgames.custhelp.com/app/home to see if it's a known issue.  I hope they don't send you here :-)

• Windows Error Reporting service stopped recording of events in the event log, and now when it spawns werfault.exe, the process consumes the CPU until he is killed.

  Windows error reporting service ceased to record events in the event viewer. The last successful entry was 26/03/2010. Since then whenever the service generates Werfault.exe to handle the error, the process seems stuck in a loop of consumer processor, but do nothing. It uses 99% of CPU (80% preferred), is not e/s and number of handles, thread, & working set do not develop.

  Three Windows updates were installed in shortly after the last successful log entry (automatic update is enabled):

  KB915597 def 1.79.702.0 & def 1.79.495.0 both for Windows Defender

  KB980182 for IE 7

  I think that my system is clean, at least Spyware Doctor think it is. I also did some tests Ad-Aware. Windows Defender analyzes every day without error.

  Has anyone else encountered this problem?

  Hi Wannknow,

  It's good information - and thanks for the thanks! You really only need to run an adware or virus (malware) program at the same time. What I would recommend is that you choose an adware program - either "Windows Defender" or "spyware doctor" and disable the other. This can be your root problem, so at this point I turn back on 'report of problems and solutions' and see if you experience the same problem:

  Again, here are the instructions:

  1. open Control Panel. (Press Ctrl-ESC and type 'control' is faster access method).

  2. click on "System and Maintenance" and then click "problem reports and solution."

  3. click on change settings in the left panel of the problem reports and Solutions window.

  4. Select Advanced settings.  In the "for my programs, problem report is: ' select 'off '. Click on CLOSE the

  Hope this helps,

  Steve <> Microsoft partner

• Explore - time error Explorer.exe stops and restarts every few minutes

  Here are the details of «APP CRASH VIEW»

  If you see the problem?

  Version = 1
  EventType = APPCRASH
  EventTime = 130602829921855470
  ReportType = 2
  Consent = 1
  UploadTime = 130602829922505507
  ReportIdentifier = 31cb36d8-6 a 88-11e4-9df6-7ce9d3c1dbef
  IntegratorReportIdentifier = 31cb36d7-6 a 88-11e4-9df6-7ce9d3c1dbef
  Response.BucketId = 109500920
  Response.BucketTable = 4
  Response.Type = 4
  SIG [0]. Name = name of the Application
  SIG [0]. Value = Explorer.exe
  GIS [1]. Name = Version of the Application
  GIS [1]. Value = 6.1.7601.17567
  GIS [2]. Name = timestamp of the Application
  GIS [2]. Value = 4d672ee4
  GIS [3]. Name = name of the Module fault
  GIS [3]. Value = atiumd64.dll
  GIS [4]. Name = Fault Module Version
  GIS [4]. Value = 9.14.10.926
  GIS [5]. Name = Fault Module Timestamp
  GIS [5]. Value = 50895e0e
  GIS [6]. Name = Exception Code
  GIS [6]. Value = c0000005
  GIS [7]. Name = offset of the Exception
  GIS [7]. Value = 00000000001908db
  DynamicSig [1]. Name = OS Version
  DynamicSig [1]. Value=6.1.7601.2.1.0.256.1
  DynamicSig [2]. Name = locale ID
  DynamicSig [2]. Value = 1033
  DynamicSig [22]. Name = additional Information 1
  DynamicSig [22]. Value = ef3b
  DynamicSig [23]. Name = additional Information 2
  DynamicSig [23]. Value = ef3b56dc8a3b9becb7bfbe92ac0c0072
  DynamicSig [24]. Name = additional Information 3
  DynamicSig [24]. Value = fb3a
  DynamicSig [25]. Name = additional Information 4
  DynamicSig [25]. Value = fb3a61fa1fd0a32aa601dba00fc2a5df
  UI[2]=C:\Windows\Explorer.exe
  UI [3] = Windows Explorer has stopped working
  UI [4] = Windows can search for a solution to the problem online and try to restart the program.
  UI [5] = check online for a solution, and then restart the program
  UI [6] = check online for a solution later and close the program
  UI [7] = close the program
  LoadedModule[0]=C:\Windows\Explorer.EXE
  LoadedModule[1]=C:\Windows\SYSTEM32\ntdll.dll
  LoadedModule[2]=C:\Windows\system32\kernel32.dll
  LoadedModule[3]=C:\Windows\system32\KERNELBASE.dll
  LoadedModule [4] = C:\Program Files\Bitdefender\Bitdefender 2015\Active Virus Control\Avc3_00266_002\avcuf64.dll
  LoadedModule[5]=C:\Windows\system32\ADVAPI32.dll
  LoadedModule[6]=C:\Windows\system32\msvcrt.dll
  LoadedModule[7]=C:\Windows\SYSTEM32\sechost.dll
  LoadedModule[8]=C:\Windows\system32\RPCRT4.dll
  LoadedModule[9]=C:\Windows\system32\GDI32.dll
  LoadedModule[10]=C:\Windows\system32\USER32.dll
  LoadedModule[11]=C:\Windows\system32\LPK.dll
  LoadedModule[12]=C:\Windows\system32\USP10.dll
  LoadedModule[13]=C:\Windows\system32\SHLWAPI.dll
  LoadedModule[14]=C:\Windows\system32\SHELL32.dll
  LoadedModule[15]=C:\Windows\system32\ole32.dll
  LoadedModule[16]=C:\Windows\system32\OLEAUT32.dll
  LoadedModule[17]=C:\Windows\system32\EXPLORERFRAME.dll
  LoadedModule[18]=C:\Windows\system32\DUser.dll
  LoadedModule[19]=C:\Windows\system32\DUI70.dll
  LoadedModule[20]=C:\Windows\system32\IMM32.dll
  LoadedModule[21]=C:\Windows\system32\MSCTF.dll
  LoadedModule[22]=C:\Windows\system32\UxTheme.dll
  LoadedModule[23]=C:\Windows\system32\POWRPROF.dll
  LoadedModule[24]=C:\Windows\system32\SETUPAPI.dll
  LoadedModule[25]=C:\Windows\system32\CFGMGR32.dll
  LoadedModule[26]=C:\Windows\system32\DEVOBJ.dll
  LoadedModule[27]=C:\Windows\system32\dwmapi.dll
  LoadedModule[28]=C:\Windows\system32\slc.dll
  LoadedModule[29]=C:\Windows\WinSxS\amd64_microsoft.windows.gdiplus_6595b64144ccf1df_1.1.7601.18455_none_2b283fd671e9bf4d\gdiplus.dll
  LoadedModule[30]=C:\Windows\system32\Secur32.dll
  LoadedModule [31] = C:\Windows\system32\SSPICLI. DLL
  LoadedModule[32]=C:\Windows\system32\PROPSYS.dll
  LoadedModule[33]=C:\Windows\system32\CRYPTBASE.dll
  LoadedModule[34]=C:\Windows\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_fa396087175ac9ac\comctl32.dll
  LoadedModule[35]=C:\Windows\system32\WindowsCodecs.dll
  LoadedModule[36]=C:\Windows\system32\profapi.dll
  LoadedModule[37]=C:\Windows\system32\apphelp.dll
  LoadedModule[38]=C:\Windows\system32\CLBCatQ.DLL
  LoadedModule[39]=C:\Windows\system32\AcSignIcon.dll
  LoadedModule[40]=C:\Windows\system32\mfc100u.dll
  LoadedModule[41]=C:\Windows\system32\MSVCR100.dll
  LoadedModule[42]=C:\Windows\system32\MSIMG32.dll
  LoadedModule [43] = C:\Windows\system32\MFC100ENU. DLL
  LoadedModule[44]=C:\Windows\system32\EhStorShell.dll
  LoadedModule [45] = C:\Program Files (x86)\Google\Drive\googledrivesync64.dll
  LoadedModule [46] = C:\Windows\system32\PSAPI. DLL
  LoadedModule[47]=C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_08e61857a83bc251\MSVCP90.dll
  LoadedModule[48]=C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_08e61857a83bc251\MSVCR90.dll
  LoadedModule [49] = C:\PROGRA~1\MICROS~2\Office14\GROOVEEX. DLL
  LoadedModule[50]=C:\Windows\WinSxS\amd64_microsoft.vc90.atl_1fc8b3b9a1e18e3b_9.0.30729.6161_none_0a1fd3a3a768b895\ATL90. DLL
  LoadedModule[51]=C:\PROGRA~1\COMMON~1\MICROS~1\OFFICE14\Cultures\office.odf
  LoadedModule[52]=C:\PROGRA~1\MICROS~2\Office14\1033\GrooveIntlResource.dll
  LoadedModule[53]=C:\Windows\system32\IconCodecService.dll
  LoadedModule[54]=C:\Windows\system32\CRYPTSP.dll
  LoadedModule[55]=C:\Windows\system32\rsaenh.dll
  LoadedModule[56]=C:\Windows\system32\RpcRtRemote.dll
  LoadedModule[57]=C:\Windows\system32\SndVolSSO.DLL
  LoadedModule [58] = C:\Windows\system32\HID. DLL
  LoadedModule[59]=C:\Windows\System32\MMDevApi.dll
  LoadedModule[60]=C:\Windows\system32\timedate.cpl
  LoadedModule [61] = to C:\Windows\system32\ATL. DLL
  LoadedModule[62]=C:\Windows\system32\actxprxy.dll
  LoadedModule[63]=C:\Windows\system32\ntmarta.dll
  LoadedModule[64]=C:\Windows\system32\WLDAP32.dll
  LoadedModule[65]=C:\Windows\System32\shdocvw.dll
  LoadedModule[66]=C:\Windows\system32\LINKINFO.dll
  LoadedModule[67]=C:\Windows\system32\USERENV.dll
  LoadedModule[68]=C:\Windows\System32\gameux.dll
  LoadedModule[69]=C:\Windows\System32\XmlLite.dll
  LoadedModule[70]=C:\Windows\system32\CRYPT32.dll
  LoadedModule[71]=C:\Windows\system32\MSASN1.dll
  LoadedModule[72]=C:\Windows\System32\wer.dll
  LoadedModule[73]=C:\Windows\System32\shacct.dll
  LoadedModule[74]=C:\Windows\system32\SAMLIB.dll
  LoadedModule[75]=C:\Windows\system32\samcli.dll
  LoadedModule[76]=C:\Windows\system32\netutils.dll
  LoadedModule[77]=C:\Windows\system32\msiltcfg.dll
  LoadedModule[78]=C:\Windows\system32\VERSION.dll
  LoadedModule[79]=C:\Windows\system32\msi.dll
  LoadedModule[80]=C:\Windows\system32\MsftEdit.dll
  LoadedModule[81]=C:\Windows\system32\msls31.dll
  LoadedModule [82] = c: Files\microsoft shared\ink\tiptsf.dll
  LoadedModule[83]=C:\Windows\system32\authui.dll
  LoadedModule[84]=C:\Windows\system32\CRYPTUI.dll
  LoadedModule[85]=C:\Windows\system32\WINSTA.dll
  LoadedModule[86]=C:\Windows\system32\NetworkExplorer.dll
  LoadedModule[87]=C:\Windows\System32\msxml3.dll
  LoadedModule[88]=C:\Windows\system32\urlmon.dll
  LoadedModule[89]=C:\Windows\system32\api-ms-win-downlevel-ole32-l1-1-0.dll
  LoadedModule[90]=C:\Windows\system32\api-ms-win-downlevel-shlwapi-l1-1-0.dll
  LoadedModule[91]=C:\Windows\system32\api-ms-win-downlevel-advapi32-l1-1-0.dll
  LoadedModule[92]=C:\Windows\system32\api-ms-win-downlevel-user32-l1-1-0.dll
  LoadedModule[93]=C:\Windows\system32\api-ms-win-downlevel-version-l1-1-0.dll
  LoadedModule[94]=C:\Windows\system32\api-ms-win-downlevel-normaliz-l1-1-0.dll
  LoadedModule [95] = C:\Windows\system32\normaliz. DLL
  LoadedModule[96]=C:\Windows\system32\iertutil.dll
  LoadedModule[97]=C:\Windows\system32\WININET.dll
  LoadedModule[98]=C:\Windows\system32\api-ms-win-downlevel-shlwapi-l2-1-0.dll
  LoadedModule[99]=C:\Windows\system32\api-ms-win-downlevel-advapi32-l2-1-0.dll
  LoadedModule [100] = C:\Program Files\Autodesk\Autodesk Sync\RealDwg\AcSignCore16.dll
  LoadedModule[101]=C:\Windows\system32\WS2_32.dll
  LoadedModule[102]=C:\Windows\system32\NSI.dll
  LoadedModule[103]=C:\Windows\system32\MSVCP100.dll
  LoadedModule[104]=C:\Windows\system32\ntshrui.dll
  LoadedModule[105]=C:\Windows\system32\srvcli.dll
  LoadedModule[106]=C:\Windows\system32\cscapi.dll
  LoadedModule[107]=C:\Windows\system32\msutb.dll
  LoadedModule[108]=C:\Windows\system32\stobject.dll
  LoadedModule[109]=C:\Windows\system32\BatMeter.dll
  LoadedModule[110]=C:\Windows\system32\WTSAPI32.dll
  LoadedModule[111]=C:\Windows\system32\WINTRUST.dll
  LoadedModule[112]=C:\Windows\system32\es.dll
  LoadedModule[113]=C:\Windows\system32\prnfldr.dll
  LoadedModule [114] = C:\Windows\system32\WINSPOOL. DRV
  LoadedModule [115] = C:\Windows\system32\AUDIOSES. DLL
  LoadedModule[116]=C:\Windows\system32\dxp.dll
  LoadedModule[117]=C:\Windows\system32\Syncreg.dll
  LoadedModule[118]=C:\Windows\ehome\ehSSO.dll
  LoadedModule[119]=C:\Windows\System32\netshell.dll
  LoadedModule [120] = C:\Windows\System32\IPHLPAPI. DLL
  LoadedModule [121] = C:\Windows\System32\WINNSI. DLL
  LoadedModule[122]=C:\Windows\System32\nlaapi.dll
  LoadedModule[123]=C:\Windows\System32\AltTab.dll
  LoadedModule[124]=C:\Windows\system32\wpdshserviceobj.dll
  LoadedModule[125]=C:\Windows\system32\PortableDeviceTypes.dll
  LoadedModule[126]=C:\Windows\system32\PortableDeviceApi.dll
  LoadedModule[127]=C:\Windows\system32\mssprxy.dll
  LoadedModule[128]=C:\Windows\system32\taskschd.dll
  LoadedModule[129]=C:\Windows\System32\pnidui.dll
  LoadedModule[130]=C:\Windows\System32\QUtil.dll
  LoadedModule[131]=C:\Windows\System32\wevtapi.dll
  LoadedModule [132] = C:\Windows\system32\dhcpcsvc. DLL
  LoadedModule [133] = C:\Windows\system32\dhcpcsvc6. DLL
  LoadedModule[134]=C:\Windows\system32\credssp.dll
  LoadedModule[135]=C:\Windows\System32\npmproxy.dll
  LoadedModule[136]=C:\Windows\System32\cscui.dll
  LoadedModule[137]=C:\Windows\System32\CSCDLL.dll
  LoadedModule[138]=C:\Windows\system32\Wlanapi.dll
  LoadedModule[139]=C:\Windows\system32\wlanutil.dll
  LoadedModule[140]=C:\Windows\system32\wwanapi.dll
  LoadedModule[141]=C:\Windows\system32\wwapi.dll
  LoadedModule[142]=C:\Windows\System32\QAgent.dll
  LoadedModule[143]=C:\Windows\System32\srchadmin.dll
  LoadedModule [144] = C:\Windows\system32\SXS. DLL
  LoadedModule[145]=C:\Windows\System32\bthprops.cpl
  LoadedModule[146]=C:\Windows\System32\SyncCenter.dll
  LoadedModule[147]=C:\Windows\System32\Actioncenter.dll
  LoadedModule[148]=C:\Windows\system32\imapi2.dll
  LoadedModule[149]=C:\Windows\System32\hgcpl.dll
  LoadedModule[150]=C:\Windows\System32\provsvc.dll
  LoadedModule[151]=C:\Windows\System32\netprofm.dll
  LoadedModule[152]=C:\Windows\system32\wkscli.dll
  LoadedModule[153]=C:\Windows\system32\fxsst.dll
  LoadedModule[154]=C:\Windows\system32\FXSAPI.dll
  LoadedModule [155] = C:\Windows\system32\FXSRESM. DLL
  LoadedModule[156]=C:\Windows\System32\wscinterop.dll
  LoadedModule[157]=C:\Windows\System32\WSCAPI.dll
  LoadedModule[158]=C:\Windows\System32\wscui.cpl
  LoadedModule[159]=C:\Windows\System32\werconcpl.dll
  LoadedModule[160]=C:\Windows\System32\framedynos.dll
  LoadedModule[161]=C:\Windows\System32\wercplsupport.dll
  LoadedModule[162]=C:\Windows\System32\msxml6.dll
  LoadedModule [163] = c: Files\Microsoft Shared\OFFICE14\MSOXMLMF. DLL
  LoadedModule[164]=C:\Windows\System32\hcproviders.dll
  LoadedModule [165] = C:\Program may Explorer\ieproxy.dll
  LoadedModule[166]=C:\Windows\system32\ddraw.dll
  LoadedModule[167]=C:\Windows\system32\DCIMAN32.dll
  LoadedModule[168]=C:\Windows\system32\aticfx64.dll
  LoadedModule[169]=C:\Windows\system32\atiu9p64.dll
  LoadedModule[170]=C:\Windows\system32\atiumd64.dll
  LoadedModule[171]=C:\Windows\system32\atiumd6a.dll
  State [0]. Key = transport. DoneStage1
  State [0]. Value = 1
  FriendlyEventName = Stopped Working
  ConsentKey = APPCRASH
  AppName = Windows Explorer
  AppPath=C:\Windows\Explorer.EXE

  Thanks, I found how to fix this.

  If someone has experienced this problem.

  Open cmd in menu start - administrator

  type sfc/scannow

  Let him finish

  Restart your computer.

  I hope that this will be resolved.

  Kind regards

  Raif

• Windows Vista will not stop or restart

  When I try to quit or restart my computer, the screen indicates "SHUTTING DOWN", then the display shuts off, the power light goes off on the tower but increases the speed of the fan at maximum speed and the unit will continue to operate in this way until I have turn it off manually. When I try to turn the computer back on I get the same thing, the lights and the fan runs at maximum speed nothing else happens, the monitor does not come on or anything else, he just 'buzzes '. I'm not the only person having this problem, I know at least two other people who have exactly the same problem! I was told that a faulty update of Microsoft is to blame for the problem I encounter but I can't find a "solution" for this anywhere. I can do to remedy this? Need help please, I can't afford to buy a new computer at the moment and unable to restart, my computer works perfectly. All this trouble started about three weeks ago. Thanks for any help you might be able to offer me.

  Gateway GT5473E

  Windows Vista Edition Home Premium SP2

  Thank you for your reply Diana, unfortunately I already took my computer to an expert for repair. I should be back soon, and I'll post the results and the 'fix', if possible, here, for others, who may be affected by the same problems.

• Windows error message install stopped working

  Often, when I install a program, updates, I get this message Windows install stopped taking, windows is collecting more information to send to Microsoft. Please tell me what wrong with my computer, and what to do. Thank you.

  Troubleshoot Windows install

  2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  1. in the menu 'Start', click on ' execute:.»

  2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

  3. in the menu 'Start', click 'run '.

  4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

  If this is insufficient, the I would say to install the Windows Installer Cleanup utility and run that to remove the Java remains Setup files that can cause problems with your current installation.

  For more information, visit the below mentioned link:

  http://support.Microsoft.com/kb/290301

  ----------------------

  Click Start Orb, in the box, type search: Regedit.

  Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver

  Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

• My Windows is unable to shutdown or restart System

  I have Windows 7 Ultimate Service Pack 1 on my PC. Sometimes when I restart or shut down my windows, I click on stop or restart several times, BUT it turned off at all! This happens often when I worked with my PC, a lot of time.

  Can U help me?

  Hello Michele,.

  Welcome to the Microsoft Community Forum.

  1. What happens when you click on Restart/Shutdown?
  2. You did no particular change in the computer?

  Disconnect all external devices and then try to stop/restart the computer.

  Try to start the computer in safe mode and then try to shut down the computer.

  Refer to: start your computer in safe mode

  http://Windows.Microsoft.com/en-AU/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  If the computer stops through safe mode, perform the clean boot.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  See the link to perform the clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: See " " How to reset the computer to start normally after a boot minimum troubleshooting "to prepare the computer to start as usual after troubleshooting. "

  Why my computer does not turn off?

  Programs sometimes prevent Windows to close properly. When this happens, the screen darkens and Windows indicates which programs prevent the computer from closing, and sometimes why.

  The dark screen displays two buttons: Force shutdown and cancel. Clicking Force shutdown closed all programs, closed the windows and then turns off your computer. If you click this button, you may lose all of the work that you have not saved, so if you need to save files, click Cancel to return to Windows and save your work.

  Occasionally, you will need to stop manually a program is not responding.

  Additional information:

  Turn off a computer: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/turn-off-a-computer-frequently-asked-questions

  See also the article: you can't do a computer that is running Windows 7 shuts down or sleep

  http://support.Microsoft.com/kb/977307/en-us

  Let us know the update, we will be happy to help you further.

  Thank you.

• ID 1073 Windows error stop or restart

  I try to retrieve or check ererors... But seems that nothing works... I'm trying to quit and I can't because windows will not tiurn off or not restat. I have XP profesional a laptopcompaq tc 4400 and norton antivirus.

  My error in Event Viewer id is 1073.

  OK, I fix it!

  From windows live messenger, I start by ending the task manager programs up to turn on work. I finished so after reboot windows msnmsgr.exe and stop.

  Thank you for everything.

  LM

• When I try to stop it restarts and also error Windows has recovered from unexpected shutdown.

  ORIGINAL TITLE: I can't stop computer.

  I can't get the computer to shutdown. When I try to stop, it restarts.

  After that which displays Note: popular has recovered from unexpected shutdown.
  Please, help me to solve this problem.

  Hello

  Did you of recent changes to the computer before the show?

  I suggest to download and install the patch that is available in the following link and check if it helps.

  You cannot shut down a computer that is running Windows 7, or sleep: http://support.microsoft.com/kb/977307  

  It will be useful.

• Live Movie Maker problem error window "Windows Live Essentials has stopped working"

  Original title: window Live Movie Maker problem

  Hello, I use Window Vista Home Basic.

  The problem: after installing Windows Live Movie Maker, I try to open it, but it says that Windows Live Essentials has stopped working. (This means that Windows Live Movie Maker also stopped working)

  Here are the details of the problem:
  Signature of the problem:
  Problem event name: APPCRASH
  Application name: wlstartup.exe
  Application version: 15.4.3538.513
  Application timestamp: 4dcdaece
  Fault Module name: StackHash_07df
  Fault Module Version: 6.0.6002.18327
  Timestamp of Module error: 4cb73436
  Exception code: c0000374
  Exception offset: 000b06fc
  OS version: 6.0.6002.2.2.0.768.2
  Locale ID: 1033
  Additional information 1: 07df
  More information 2: 5bea05726e84577571252df5cfd5f3b3
  3 more information: 9d8a
  Additional information 4: 469378cfc7f1a28148727070d8eb264f

  Anyone who can solve this problem, please help me!

  Hi madjid Susanto,.

  • Did you the latest changes on the computer?

   

  Method 1

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  If the previous step fails then I would suggest that you post your request in the forums of Windows live for better assistance.

  http://www.windowslivehelp.com/product.aspx?ProductID=5

• Windows explorer.exe stops and restarts allot

  I use windows vista 32 bit home premium service pack one. I would like to know if there are any solutions for my problem by blocking windows explorer.exe dive down and reboot... I scanned the computer with macffe and test a hard drive and it says its fine but I still get the error what can that do?

  Hello

  Treat him as a bluescreen to start with - check the event viewer and use the tool Nirsoft below to see if it
  are the error codes. Do the SFC and CheckDisk drivers check. Next message will be a few methods for
  check startup programs and however they must be made to ensure that they are not the cause of service or
  contribute to the problem. Even if Eventviewer or points of Nirsoft tool you still have somewhere to CFS,
  CheckDisk and drivers.

  Look in the Event Viewer to see if something is reported on these reboots.

  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Mouse stopped working, to error '(32 Rudll) windows host process has stopped working ".

  My intelli mouse stopped working and what I get is "(32 Rudll) windows host process has stopped working" what's happened?

  Hi Stevan I am,

   

  1. for how long have you been faced with this problem?

  2. did you of recent changes on the computer?
  3 do you mean the computer crashes when you get the error?

   

  Method 1:

  You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to perform a Scan SFC -

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

   

  Method 2:

  You can perform a clean boot and check if you are facing the same question to the clean boot. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -

  http://support.Microsoft.com/kb/929135

  If the problem is resolved check which service is causing the problem; referring to article and following the other steps.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

   

  I hope this helps.

• Whenever I close my Windows Live Mail, an error message appears and says "Windows Live Mail has stopped working".

  WHENEVER I FARM WINDOWS LOVE MAIL AN ERROR MESSAGE APPEARS AND SAYS WINDOWS LIVE MAIL HAS STOPPED WORKING AND WILL LOOK FOR A SOLUTION THEN IT RESTARTS IMMEDIATELY.   BUT IT DOES NOT STOP ALL I NEED TO DO IS TO CANCEL THE ERROR MESSAGE AND CONTINUE TO USE IT AT WORK.

  PLEASE PLEASE PLEASE HELP - I TRIED ALL SUGGESTIONS POSSIBLE ON MANY WEB SITES.

  original title: I have the same problem - have tried everything but nothing works please PLEASE GIVE a STRAIGHT ANSWER

  One thing you need to know...

  One of the internet labels: do not compose the message in capital letters to entirely. It is considered as shouting and rude. It is also, may be not for you, very difficult to read.

  Uestion belongs you to Windows Live Solution Center. Please post the following link:
  Mail-Forums - Mail Threads section:

  http://windowslivehelp.com/forums.aspx?ProductID=15