Windows Explorer fails repeatable

Similar Questions

• Windows Update fails repeatedly to install updates KB3079904 and six other people, keep trying for 3 weeks now

  Drop support for Windows Vista is apparently present but perhaps without notice.

  Three weeks since July 14, 2015 Windows Update has repeatedly tried and failed to install seven updates. Three other updates cannot be installed while in time (KB3072633, KB3057154, KB3065979) but was finally installing manually through Microsoft Download Center.  Further attempts by MDC didn't settle because "the update does not apply to your system" (KB3070102, KB3067903).  KB3072630 update did not show an available option of Windows Vista.  The remaining updates would download a version of Vista but just have not installed (KB3070102, KB3079904, KB309392, KB3067505 and KB3065822, which is a Cumulative of IE9 for Windows Vista update).

  With no fix that works my PC will apparently try to download these and other updates in perpetuity.  Some files, such as KB915597, is constantly to be installed and reinstalled successfully during this time.

  I tried to upgrade Vista on TOSHIBA to my mother, it runs cpu to slow to 46%, I'm sure I need of more memory, my concern is that I just tried to upgrade on my HP17 for the new completely WIN10 have not upgraded, but froze on a continuous flashing, cannot access via ctrl alt esc file insight and nothing moves percentages are 0 nothing downloaded? or downloaded?

• Portege R700 with Windows 7 64-bit: Windows Explorer fails to update

  It happens regularly after using my laptop for a while (1 hour more?) that Windows Explorer is no longer refreshes one of its windows. EG., delete a file and it is always displayed and disappears only after pressing the refresh (F5) button.

  Anyone who has had this experience, knows the problem, may suggest a solution (with the exception of maintenance by pressing F5 and possibly restart in frustration, which helps during some time)?

  It's very strange. I tested it on my Win7 64 bit-Satellite P500. I ve open two windows explore with in the same place, so I got the same content in both entities. When I delete a file or folder in the left window the right showed immediately that certain document has disappeared.

  I m really surprised that describes the problem may occur.
  Are you using the original OS that you got with your laptop?

• Windows Explorer crashes repeatedly on startup and cannot choose a restore point?

  Equipped with Vista 64-bit... Had a problem for a while opening now and then records that have videos in them.  I could open other programs (email, etc.), but not the files with the Solution Explorer or Explorer would crash.  Not a big deal and I did have the time to fix it (no online seemed to know anyway).

  Trying to send two videos to two friends via Skype, somehow shortcuts placed got video on my desktop and Explorer crashed.  Whenever he finishes crashing and returns, it crashes again so I can't even get rid of them by removing their or whatever it is.  It crashes so quickly, that you can not even click on one.

  I tried to reboot (har har) and even in safe mode, what happens.  I tried to go to a system restore, but it tells me that the System Restore Wizard is already running when it is obviously not.  I don't really know what I can do at this point, that the only thing that stops it is the cancellation of the application of Solution Explorer, but then I can't access anything that anyone else.  If only I could get the icons on my desktop, I could solve the problem with the videos, but I can't even get to them to get rid of them.

  Please help, I really need to use this PC this week and I tried almost everything I can think of at my disposal.

  The 'failing module' is the kernel32.dll file, which is a Windows file.

  However, the problem can actually be someone else, possibly from third parties, of the file.

  It may be useful to try to capture a dump of user of the explorer.exe crash mode.

  You can configure Windows to create dumps of user mode. First, create a System Restore Point.

  If you copy and paste the following text in Notepad and save it as a .reg file, then right click on the .reg file and select "Merge" to add to the registry, when the .dmp file explorer.exe plant should be created in the C:\CrashDumps folder:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows error Reporting\LocalDumps\explorer.exe]
  "DumpFolder" = hex (2): 43, 00, 3A, 00, 5 c 00, 43, 00, 72, 00, 61, 00, 73, 00, 68, 00, 44, 00, 75,.
  00, 6 D, 00, 70, 00, 73, 00, 00, 00

  
  After Explorer (explorer.exe) crashes, you can, and then make the .dmp file available (provide the link) via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  More information on the collection of user-mode dumps:

  ("msdn.microsoft.com/en-us/library··· 85) .aspx

• Microsoft update as kb955706 for Sql server 2005 for visual Studio 2008 on windows 7 fails repeatedly.

  I received this error message;  Update error code received Windows 24 - 2 c.

  Try to re-post in the SQL Server Setup & Upgrade forum for appropriate assistance: http://social.msdn.microsoft.com/forums/en-US/sqlsetupandupgrade/threads/

  SQL Server 2005 Setup fails when MSXML Core Services 6.0 Service Pack 2 is already installed:
  http://support.Microsoft.com/kb/968749

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot remove a folder regardless if it's bootdrive or external. Windows Explorer fails and sends the contents of the error to Microsoft.

  This occurs when you try to delete a folder

  I would say that we have a look at your management context menus. There might be something integrated Explorer causing crash.

  1. download the utility Shell here:
  http://www.Nirsoft.net/utils/shexview_setup.exe

  2. Once opened, the utility looks for the components. After the scan, sort results by 'Type' and then expand the "Company name" field, so that you can read all
  3. the idea here would be to disable all THE items in the category 'Context Menu' that are NOT part the category of company name "Microsoft Corporation". Basically, if a context menu, and it doesn't say Microsoft for the extreme right, do a right-click and disable the entry

  4. once all the non Microsoft context menus are disabled, click on the button 'Save' at the top
  5. then restart your computer.

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installation of HP OfficePro 8500 on Windows Vista fails repeatedly

  1. system: Windows 7 Vista completely up to date. An OfficePro 8500 HP. Fully functional.

  2 printer has gone offline, if we could still and scanning.

  3A ran the MS software troubleshooting of devices and printers. Found no error.

  4 used the HP software to uninstall the printer driver and software.

  5. power cycle the printer to force a reconfiguration of the default printer.

  6 restarted Windows System.

  7. use the HP Printer doctor tool to check. Use the tool to download HP install the tool and the printer drivers.

  8 completed the installation. Fax Works works/Scanner.

  9. the printer does not print.

  10. check line print, turned on the spooler and turns off, check the print queue. The documents are not sent to the queue print.

  What to do next?

  Note: I now got 4 hours into this mess. Even $100 an hour, it would be cheaper and I imagine that more quickly to buy a new printer.

  Welcome to the @Wm_Dailey forums

  I read your post about the question of impression you have with your Officejet 8500. The good news is that if the printer copies, scans or faxes, the printer itself works fine, and the problem is more in the software, the driver or the operating system.

  I will do my best to help you with this. In order to find the best info, I would need to know if you are working with Windows Vista or Windows 7 and what 8500 model you have.

  Let me know and I will check it for you.

  • All-in-one printer, HP Officejet Pro 8500 - A909a
  • Printers HP Officejet Pro 8500 all-in-One - A909b
  • All-in-one printer, HP Officejet Pro 8500 Prime - A909n
  • All-in-one HP Officejet Pro 8500 wireless printer - A909g

  In the meantime, try to restart the print spooler:

• Windows update fails on XP Pro SP3 with 0x8007F064 error code.

  Windows update fails repeatedly on XP Pro SP3 with 0x8007F064 error code:

  Update security for Windows XP (KB2661637)
  A security update cumulative for Internet Explorer 8 for Windows XP (KB2647516)
  Update security for Windows XP (KB2660465)

  Update works fine until yesterday. Microsoft tool ran (no change), reloaded Windows Update (no change), a tool for malware own virus check comes to nothing. Any ideas?

  Since it is a Dell computer, chances are a Norton or McAfee free trial is preinstalled. When you have done the clean install, the free trialware would have ALSO reinstalled (but not valid now).  Let's see if the execution of two removal tools & a few tweaks resolves the behavior.

  [You can print these instructions for reference offline. [If a step said to restart, restart! ]

  1. click right on the following link to download the Norton removal tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. right click on the following link to download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. double-click on the file that you saved in # 1 a above, to run the utility. DO TAP not your keyboard until the race ends, then restart.

  3. double-click the file that you saved in # 1 b above to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  4 start | Settings | Control Panel | Add/Remove programs. Set Program Access and Defaults: select (check) the CUSTOM [<>] configuration option, and then click the arrows pointing to the far-right | Browser: select "Internet Explorer" here (to not "use my current... »). [1]

  Illustration: http://teamtutorials.com/wp-content/uploads/2007/05/set-program-access-defaults-02.jpg

  If you return to check the out parameter #1 above, it'll be "Use my current..." "but now it's going to be"point"to IE so that you don't need to change anything or reset. [Think of it.]

  5. now check your settings here: IE tools | Internet Options | Programs | Default web browser: If the make default button is NOT dimmed, click/press it.

  6. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  7. IMPORTANT - don't SKIP THIS STEP! Open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 of => [ignore the title & symptoms].

  7B. do disappear/close the troubleshooter automatic pop - up; then...

  7 c. run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [2]

  8 restart once more.

  9. open Internet Explorer (only!) at http://windowsupdate.microsoft.com . Select CUSTOM and scan | See if you can install all the available now security updates (i.e., KB2660465, KB2647516 or KB2661637).

  -Online if an update of root certificates is listed under the category of updates software optional on the left side of the window of scan results, install it to enjoy greater security of IE8. [3]

  Tip: Do NOT install any other updates software optional or any updated material in option .

  10. in response to this post with a status report.

  Good luck!

  ==================================================
  [1] once you get the missing updates installed, do not hesitate to make Firefox default browser.

  [2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.

  [3] MS provided the distribution of a new version of update root certificates on Tuesday, 28 Feb-12. Until then, the update root certificates , released on 22 Nov-11 will be offered. MS usually new versions of root certificates update releases every 3 or 4 months.

  [Last updated - 24 Feb-12, 19:47 UTC]

• Family Vista premium SP2 - NAS - I can see it, can open its highest level, can go through it with the windows Explorer - strangely I can browse it with windows internet explorer 8 - what's up with windows Explorer?

  I have a WD NAS, who has worked through my Explorer windows until recently - now I can access only through Internet Explorer 8 using FTP.

  I use to be able to open the windows Explorer and able to 'network' and click on the NAS and enter my name/password and access all folders and files to the breast. Now I go into windows Explorer and I can see the NAS and I can click on it and enter my name and password, and it shows even the top-level folders-

  I can't do any further due to the standard contextual windows alert, and the message goes between the "network name is not available" and the message "already mapped the drive. I have not noticed a model and did not install anything at the same time. Don't try to do wireless, the NAS is ethernet wired to my router and my router to my computer - no router updates/changes - no updates/changes NAS - no I do not have the mapped drives sitting over there, yes I'm admin on the computer and the NAS server - there is no noticeble change I can find - not firewall , no anitvirus, no microsoft updates - anything good for troubleshooting?

  Anyone has an idea why only windows Explorer fails now to be able to access the NAS, esp when FTP with internet explore works fine? Thank you!

  Hi Dgbjr68,

  Try the following steps.

  Step 1

  Check the behavior in SafeMode with network and post back the result.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2

  You can also try to temporarily disable the firewall on your computer and check the status.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  NOTE: Enable the firewall after trying this step.

  Previous post: the results.

  Bindu S -Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Explorer.exe repeatedly crashes in Windows 7 RC

  The Explorer repeatedly crashes in Windows 7 RC.  While browsing through the files and you want to remove some of the video library & hangs with the similar error msg.

  The failing application name: Explorer.EXE, version: 6.1.7100.0, time stamp: 0x49ee918d
  The failed module name: ntdll.dll, version: 6.1.7100.0, time stamp: 0x49eea66e
  Exception code: 0xc0000005
  Offset: 0x0006876f
  ID of the process failed: 0 x 1204
  Start time of application vulnerabilities: 0x01ca50d7df3044d6

  Says that c:\windows\explorer.exe is the problem.

  Thank you
  JP

  I suspect a corrupted system file. SFC could fix that. Reset Internet Explorer can help. At worst, I think you can fix it with a relocation, or "inplace upgrade" Win 7 from the installation DVD.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. click Startand type cmd in the box start the search .

  2 right-click cmd in the programs list and then click run as administrator.

  3. If you are prompted for an administrator password or a confirmation, type your password or click continue

  4. at the command prompt, type the following line and press ENTER: sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  
  Internet Explorer resets
  Solve this problem
  Microsoft Fix it 50195

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• KB2631813 for Windows XP security update has failed repeatedly to install (error code: 0 x 8007003)

  original title: KB2631813 for Windows XP security update has failed repeatedly to install

  Update KB2631813 for Windows XP security repeatedly failed to install - error code 0 x 8007003. All other updates install successfully. None of the proposed solutions have worked so far including clear update history.

  should [1] I really KB2631813?

  [2] my computer seems not to like it.

  [3] do you think that KB2631813 is really all this effort?

  A1. Yes, as much as you need at every update of safety critical other.

  Note that the vulnerability being patched (e.g., MS12-004) requires KB2598479 and KB2631813 to install! IOW, your computer is still vulnerable to the exploit if if KB2631813 is not installed.

  A2. Your computer 'loved' KB975562 (which is replaced or replaced by KB2631813), so it should also 'like' KB2631813.

  A3. Is the security of your computer and data to this topic (e.g., banking online & credit card passwords) really this effort?

  Repost...

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Windows Explorer crashes failed msvcr90.dll

  Friends

  I have this most annoying problem. It happens on my computer and the computer of a friend. I have Vista Pro 64 bit and my friend a Windows 7 Home Premium, also 64-bit.

  We both use the same two programs for a specific project, we want to do. A program is a data management program called FieldWorks, where export us the data in the format of LibreOffice. I think that this problem started during the installation of LibreOffice and then begins to export stuff in the program of FieldWorks.

  Very often, when we click on an exported file in .odt (LibreOffice) on the desktop, or simply click anywhere in a folder on the desktop, where we store .odt files, then immediately the Windows Explorer crashes with the following error message:

  Explorer Windows has stopped working. Windows can check online... Check online... The details of the problem are:

  Problem signature: problem event name: BEX64 Application name: the Explorer.EXE Application Version: 6.0.6002.18005 timestamp of the Application: 49e02a1e fault Module name: MSVCR90.dll fault Module Version: 9.0.30729.6161 fault Module Timestamp: 4dace4e7 Exception offset: Code of Exception 00000000000552d 4: c0000417 data exception: 0000000000000000 OS Version: 6.0.6002.2.2.0.256.6 locale ID: 1033 additional information 1: complementary 46e0 2 information: information additional 4ce498f1e2ebb3719af008d4ef97bedc 3 : 7 d 05 additional information 4: 729ac305dabb24e28fbe99019ecbbab7
  Also my friend and I get the exact same message and the same fault Module name and version. It can happen several times in a row, insofar as we cannot get to any of the .odt files in the folder via the Windows Eplorer window or desktop, but I got a remove the .odt file in a command window.  Otherwise just Explorer to crash. :-(

  I tried many things to fix this, among them:
  1. I re-entered the msvcr90.dll
  2. I learned that it is the program of MS Visual C++ 2008 that installs this msvcr90.dll and use it
  3. I removed all instances of MS Visual CC ++ Vista computer
  4. I removed all instances of the msvcr90.dll and restarted. Then I made sure that no file with this name has appeared again.
  5. even after that I still get this crash explore with this error message about this being the fault module msvcr90.dll!
  6. I used Windows find defective or missing files, sfc scannow. No gain.

  How this possible error, if there is no msvcr90.dll is left on the system? And no Visual C++ 2008?

  I then tried to reinstall MS Visual C++ 2008 SP1 Redistributable to see if that helped, but once again no change. :-( The same error came once again. This version of Visual C++ have not yet installed a version of msvcr90.dll but a msvrc100_XXX.dll

  Until I deleted the MS Visual C++ 2008 (and 2005 and 2010) of my system, I noticed that the existing msvcr90.dll was not even the same version that says that this error report is the version of the Module of fault!

  I am quite at a loss here. What can I do to solve this problem, which is annoying and time consuming? I could send one .odt files, someone at Microsoft to look at, or what?

  Thank you
  Calle2012

  The problem seems to be the shlxthdl_x64.dll:

  WARNING: Unable to verify timestamp for shlxthdl_x64.dll
  ERROR: Module load completed but symbols can be loaded for shlxthdl_x64.dll
  Failed to load image C:\Windows\System32\ieframe.dll, 0n2 error Win32
  WARNING: Unable to verify timestamp for ieframe.dll
  Probably caused by: msvcr90.dll (msvcr90 invalid_parameter + 70)

  The shlxthdl_x64.dll, which is at version 3.6.1.2, is a component of LibreOffice.

  The error that you are experiencing seems to be a known issue:

  https://bugs.freedesktop.org/show_bug.cgi?id=52078

  This problem can be fixed in an update of LibreOffice, so make sure you're running the latest version.

  If you are running the latest version of LibreOffice or if the error persists you can try the following:

  Go to the following folder:

  C:\Program Files (x 86) \LibreOffice 3.6\program\shlxthdl

  In this folder, right-click and rename the shlxthdl_x64.dll to shlxthdl_x64.old.

• Debug Assertion Failed - make a right click on a file causes Windows Explorer to stop working

  Make a right click on a file causes Windows Explorer to stop working and then turning it back on.

  Message I get is:

  The Degbug Assertion failed

  C:\Windows\explorer. EXE

  File: f:\dd\vctools\crt_bld\self_64_amd64\crt\src\memcyp_s.c

  Line: 62

  Expression: sizeInWords > = count

  I hope someone can help. Thanks in advance.

  Looks like a ShellExtension incompatible.

  Run ShellExView [1] and disable all NON-Microsoft extensions. If the error are gone select 3rd party addons 1 followed by the other to detect the addon that causes the problem.

  André

  [1] http://www.nirsoft.net/utils/shexview.html

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Purchased 8 a window PC, reinstalled Photoshop 5.5 on my PC, went to download updates and had a message saying download failed – repeatedly.  How can I get this corrected download problem?

  Purchased 8 a window PC, reinstalled Photoshop 5.5 on my PC, went to download updates and had a message saying download failed – repeatedly.  How can I get this corrected download problem?

  If you mean CS 5.5, the updater no longer works. You must make a list of what needs to be updated or that update failed and go here to download and install them manually.

  Updates Photoshop, Bridge and so on for Windows.

• Update for Windows XP (KB971029) repeatedly fails to install

  Update for Windows XP (KB971029) repeatedly moved and I get the error: 0x80072EFD. Any help?

  Consult the below Microsoft article and try the steps mentioned and check if it works.

  http://support.Microsoft.com/kb/836941/en-us>