Windows freezes loging screen cannot loggon as administrator (same problem with UAC)

Similar Questions

• I saw the problem with Windows Live Mail gel but I have the same problem with Windows Mail.

  I saw the problem posted on Windows Live Mail gel but I have the same problem with Windows Mail. Sometimes, while mouse refuses I can scroll vertically with the keyboard, but not always... I changed to another wireless mouse, and this has not changed. I run Vista and can't find the update, that you reference. The reopening and closing program usually fixes it, but it's annoying. It happened for about 6 weeks or so.

  Can anyone help?

  I run Vista and can't find the update, that you reference.

  What update WHO refers to?

  Try to compact and repair the database.

  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx

  And search for malware with the free version of this tool.

  Malwarebytes Anti-Malware
  http://www.Malwarebytes.org/MBAM.php

• Windows cannot print due to a problem with the installation of the current printer.

  Thread title: Epson TX235W will not print

  When I click on 'print', I get the print control. the box that tells the printer how many copies, etc.  When I toast 'print' it get a little box that says Windows cannot print due to a problem with the installation of the current printer.  Try one of the following:

  Check the printer by printing a Windows test page

  Ensure that the printer is online and on

  Reinstall the printer driver

  I did everything above and I get the same result.

  Help!

  Hello

  Did you of recent changes made to your computer that caused the problem?

  This problem is limited to a particular application?

  How is the printer connected?

  Method 1) restart the print spooler service and delete the print queue

  Start the print spooler service in the Services console

  1. Click Start and run, type services.msc, and then click OK.
  2. Right click on the print spooler service, and then click on stop.
  3. Right click on the print spooler service and then click Start.

  Start the spooler service for printing at the command prompt

  1. Click Start, run, type cmd, and then click OK.
  2. Type the following commands at the command prompt:

     net stop spooler
     net start spooler
     Output

  Note: Press ENTER after each command line.

  Cancel printing

  http://Windows.Microsoft.com/en-us/Windows-Vista/cancel-printing

  Method 2) remove and add the printer and then check.

  Add or remove a printer (Applicable for Windows 7)

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  It will be useful.

• Windows 7 cannot print - "Windows cannot print due to a problem with the installation of the current printer"

  Window 7, Lexmark 1300 series. Cannot print. When you try to print from Notepad, the error message is "the system cannot find the file specified." What impression of the word is "Windows cannot print due to a problem with the installation of the current printer" have uninstalled and reinstalled all printers in many times. Removed the Lexmark 1300 in the registry and reinstalled. No change. Ran sfc/scannnow several times. Microsoft Fixit print detected no problems. Help, please.

  Hi Baccy138,

  See the methods mentioned below and check:
  Diagnose and automatically fix the Windows USB problems
  http://support.Microsoft.com/mats/Windows_USB_diagnostics/
   
  Try to download and update the drivers manually from this site:
  http://support.Lexmark.com/index?segment=support&UserLocale=en_US&locale=en&ProductCode=LEXMARK_Z1300&page=product&FromPage=null#1
  1. click on the above link and click the menu drop down and select Windows.
  2. Select the version of operating system like Windows 7 and check the bit as a result.
  3. Download complete drivers and install it.
   
  Hope this information helps.

• Problems with UAC, Sims 3 downloader and original windows

  Problems with UAC, Sims 3 downloader and original windows

  I have windows Vista and have been using it for a while to play the sims 3 and download games via original EA downloader/store.  I had run a windows update and an original updated in the last days and therefore my sims 3 expansion packs ceased to operate.  I uninstalled all and have reinstalled the original game of the downloader of origin and now when I try to download my expansion packs I get an error message saying that windows has prevented the application creates a download directory, please accept the UAC prompt to start to download this game.  I approved the promt and they have same message came still high and so I disabled UAC altogether and still got the same error message, I looked on the EA forums and the only line I can find of them our it may be a windows problem (which I doubt)?  Can you help me?

  Hello

  Method 1:
  Right click on all of the files and select run as administrator and try to install it.

  Method 2:

  You can try creating a new user account.
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Note: select the Administration option while creating a user account

  Method 3:

  You try to run the system restore at the same time that it worked very well.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  I hope this helps. Get back to us with results

• Windows keeps cold people and ask if they have problems with their PC?

  Windows keeps cold people and ask if they have problems with their PC?

  I was just wondering if it's offers a Windows service or should I be worried because I had a persistent caller today asking me to name and asks me to turn on my PC it could help.  I leave the House at the time and had no time to pursue the other but one niggling at the back of my mind there's a missed call with number withheld on my back and a voice message with the same background noise?

  Hi MargaretWatson,

  "Microsoft made no telephone calls to you unsolicited help to fix your computer".  It is mentioned in the following article, please check the link for more details below:

  http://www.Microsoft.com/security/online-privacy/msName.aspx

  I hope this helps!

• I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)

  They all install properly but switches back to windows update to install. It's some kind of loop.

  Hi billy73,

  In addition, if you still have questions, please take a look at the thread similar here with a solution as possible.

  I hope this helps!

• Whenever I connect to my hotmail account using Windows Live, I get a warning, "there is a problem with this Web site's secure certificate. »

  original title: security

  Whenever I connect to my hotmail account using Windows Live, I get a warning, "there is a problem with this Web site's secure certificate. »

  Security certificate problems may indicate an attempt to fool you or intercept any data you send to the server.
  	We recommend that you close this webpage and do not make this Web site.
  	Click here to close this webpage.
  	Continue to this website (not recommended).
  	More information If you arrived at this page by clicking a link, check the Internet address in the address bar to be sure this is the address you've been waiting for. When you go to a Web site with an address as https://example.com, try to add the "www" in the address, https://www.example.com. If you choose to ignore this error and continue, don't get personal information on the Web site. For more information, see "Certificate errors" in Internet Explorer Help.

  Some things you can try:

  You can have old certificates root on your computer.  Try to update your root certificates from the link provided in the paragraph "Root Update Package (intended for Windows XP only)" in the following article:

  "Members of the certificate program root Windows.
    <>http://support.Microsoft.com/kb/931125 >

  Depending on which version of Internet Explorer and Service Pack level of your machine, one of the following articles might help you:

  ' "There is a problem with the security certificate from the website" when you try to visit a secure in Internet Explorer Web site.
    <>0 http://support.Microsoft.com/kb/93185>

  "Certificate error Web page is displayed when you try to visit an SSL Web using Internet Explorer 7:"There is a problem with the security certificate from the Web site""
    <>http://support.Microsoft.com/kb/950067 >

  It is also possible that indeed, you will be redirected to a false site.  Check your file C:\Windows\System32\drivers\etc\hosts ensure that there is not a bogus entry for your hotmail login.  Generally, the only line that is required in this file does not begin with a character ' # ' is ' 127.0.0.1 localhost '.

  HTH,
  JW

• LR and PS will not update 'Download error' 49 customer service contact? anyone had this problem and how to solve? was running windows 8.1 and now running windows 10 but had the same problem with two BONES

  LR and PS will not update 'Download error' 49 customer service contact? anyone had this problem and how to solve? was running windows 8.1 and now running windows 10 but had the same problem with two BONES

  Check your hosts file.  to help with this and more:

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

• Cannot get CF11 to download the free trial version for students.  Anyone having the same problem with the Adobe site?

  Cannot get CF11 to download the free trial version for students.  Anyone having the same problem with the Adobe site?

  Hello

  Please download from http://www.adobe.com/cfusion/tdrc/index.cfm?product=coldfusion&promoid=DJDUK use your Adobe ID and password to login and download CF11.

  Let me know in the case where you are facing any problems during the download, if you get any error try another browser.

  Thank you

  Priyank

• Windows Recovery error screen: cannot get my computer to start!

  After using my computer for a long period of time, I set it down for a few hours. When I put it up again, the screen was blank and I couldn't get out of hibernation. I manually turned off and restarted. Reboot, I had the Windows recovery error screen, where I was given the opportunity to 'launch Startup Repair' or 'start windows normally '. At the launch of the repair, the screen empties for a few seconds and returns to the error page. When you try to start windows normally, the system rebooted and returned to the error page. I did nothing durastic which would result in this error. Windows was preinstalled and came with any disks. How can I fix my computer and recover my files? My computer is a laptop Gateway MD.

  Have you tried from disk running of all of the above programs.  Of course, some of them managed from the disk as the Startup Repair and system restore.  Others such as SFC and chkdsk or event viewer can be run from the disk by using the command line option (and instructions above on orders to enter).

  Startup Repair and system restore has nothing to help?  Try these other options from the command prompt on the drive if you can't even in Mode safe (which is not a good sign).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• While trying to connect to my account welcome/login screen freezes. I don't face the same thing with other accounts.

  Original title: the Welcome screen problem.

  Hi all.

  I recently encountered a problem with my registration in my profile of windows 7.

  I start up my computer, and all seems well until I try to connect to my profile. He goes to the Welcome screen and stays there. He made no progress still do it. When I connect to other profiles on my mobile Samsung NP300V5AH, they proceed without a hitch. I don't know what the problem is, and I would really appreciate the help.

  See you soon.

  Hi Aden,

  Thank you for posting your request here in the Microsoft Community and we appreciate it.

  This issue may have caused due to the profile of the user related issues. I would like to know some information about this problem so that we can help you further.

  1. do you get any error code or error message while starting?

  2. the question facing you with the administrator account?

  3. have you made changes on the computer before this problem?

  I suggest you try the procedure described in the following article from Microsoft Help to fix the corrupted user profile and check if it helps. This article consists of the steps to fix the damaged user profile.

  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile#1TC=Windows-7

  What is the related issue of programs, this might have caused due to files corrupt in the administrator account. I suggest you try to fix the corrupted user profile and check whether or not this is also corrected.

  You can also try the steps in the following Microsoft Support article and check. This article consists of the steps to troubleshoot issues when Windows freezes or crashes.

  http://support.Microsoft.com/kb/2681286/en-us

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

  Please reply with the status of the issue so that we can better help you.

• Cannot install error matix web: problem with windows install.

  Original title: install windows package

  Hi, I was wondering if someone could help me, not used webmatrix for awhile and I put on and its not responding do not, I tried to re download and no luck, from the web, platform installer it returns constantly so I had a problem with the windows package install. Please can someone help?

  I use microsoft web platform install 3.0

  It fails when I try to install and a message appears

  ASP.NET web pages

  This product has not been installed successfully. There is a problem with this windows package install. a program run as part of the Setup did not finish as expected. Contact your provider to support personal or package.

  ASP.NET web pages language packs

  This product can not be installed because a failure that it was not installed successfully.

  Microsoft webmatrix.

  This product cannot be installed because a prduct which it depends have not installed successfully

  Hello

  1. What is the message exact error do you get when you try to install the web matrix?

  2. where did you download webmatrix?

  I suggest you to try the steps below and check if it helps.

  Verify that the Windows Installer service is running or not.

  Start the Windows Installer service.
  a. Click Start, type services.msc and press to enter.
  b. in the list of items, double-click Windows installation service.
  c. change the startup type to automatic and click on the Start button to start the service.
  d. click on apply and then click ok.

  e. restart the computer.

  Check whether the problem is resolved.

  Hope this information is useful.

• DirectX, d3d9.ll & d3d10.dll and Windows Update does not work... (Same problem?)

  I had some problems with my computer lately...

  The first thing I noticed is that I failed to run games and applications and I got this weird error 'missing d3d9.dll' and something in style with... "it could be fixed if you have reinstalled the application," but it didn't and I kept getting the error, then I went to see if there was even a d3d9.dll or a d3d10.dll - but it was not...

  Then. I tried to download em for the internet, but later, I noticed that they were for DirectX and therefor was not sure I had good... Then I went to update my DirectX - but failed. He says that I already had an update of DirectX version and it refused to install. I however, perhaps I could uninstall directX, but I couldn't find where and how...

  Then I however, maybe it's because some weird windows update problems - so I went to check how many updates there. I check it the day prior to that, but all of a sudden there are 14 new updates that I had not installed yet (overnight 14 new updates!).

  Does anyone have a solution to this? Please, I desperately need help!

  Hi exique,

  1. don't you make changes before the show?
  2. on what game and application that you get this error?

  DirectX runtime for end-users (also known under the name of DirectX) is an extension for the Microsoft Windows operating system that provides a set of quick material orders, low level that they can use to improve performance for Windows games and multimedia programs. The current generation of Windows games and multimedia programs does not work properly without DirectX. So, by design, you cannot remove DirectX.
  See DirectX: frequently asked questions

  We recommend that you scan sfc (System File Checker) to see if any system file is missing or damaged. To do this, try the following steps on Vista and Windows 7
  a. visit http://support.microsoft.com/kb/929833
  b. run the scan successfully.
  c. restart the computer so that the changes take effect and check the result.

  If the problem persists, we recommend that you reinstall the game or program that causes this problem.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• "You must be logged in as an administrator to install this program" error when I AM logged on as administrator. possible problem with TrustedInstaller security

  I am logged in as administrator on the single computer.  I try to install Net Nanny, which claims to be compatible Windows 7.
  The first time I tried to install it I got the error, simply, 'access denied '.  After several attempts with the same error, I rebooted in Mode safe mode with network and then got the error that the Windows Installer Service is not accessible.  After some research, I discovered that Windows Installer is not available in safe mode.
  So I booted in Normal mode.  Logged as administrator.  Tried to click with the right button on the installer downloaded for Net Nanny and ran as administrator, the connection of the administrator.  Now I get the error, "You must be logged in as administrator to install this program."  I am.
  I closed all firewalls, anti-virus software AND turn off the UAC.  I checked the compatibility AND security for the download tab and it is configured to run as administrator and I tried to run in several modes of compatibility.  I still don't "You must be logged in as administrator to install this program."  No matter what I try, I still get this error.
  I used the command prompt, type msiexec.exe / unregister, and then msiexec/regserver.  No new results.  Still the same error.

  I called Net Nanny press SEVERAL times and they will know that this is a Windows problem, because this is the first time that they already got this error.  They had me to download another file on a mirror site.  Not always the same error.  People what I'm doing wrong?  I was able to successfully install other software.  Thanks for any help!

  UPDATE * I am researching always this.  This would be a TrustedInstaller security problem?  If this is the case, is it possible to fix the TrustedInstaller or turn it off?  The big question, is that I want to turn it off?  My first thought is 'no '.  However, this software is listed on the Microsoft site as being compatible with Windows 7.  Therefore, an application that is 3rd party that is accepted by Microsoft.  Wow, I'm confused.  Don't know what to do here.

  Hello carpetfresh,

  A test, I temporarily disable user account control and then see if you can install Net Nanny. If so, we know that UAC is what is causing the problem with the installation.

  1. access control panel user to the Start Menu-> Control Panel-> user accounts and of security for the family-> user account

  2. click on the settings of the user account controll link.

  3. move the slider to never notify

  4. click OK for the changes to take effect

  5 reset.

  Once you have correctly installed the Net Nanny, then back to the control panel and reactivate the UAC.

  Answer please come back and let us know.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think