Windows KB973917 update

Similar Questions

• Can not install windows KB973917 update and getting error code 8000FFF

  I have a toshiba satellite A505 with Windows Vista 64-bit and 4 GB of RAM.  I can't install the windows KB973917 update and getting error code 8000FFF.  I have tried everything to fix it, but have had no luck.  Someone had the same problem?

  A few suggestions here: http://taurarian.mvps.org/WU_Vista/8000ffff.htm

  8000FFFF error code when you click on "Check for Updates" in the item of control panel Windows Update on a Windows Vista-based computer
  http://support.Microsoft.com/kb/946414

• Vista KB973917 update cannot install. Help!

  I can't install the windows KB973917 update I get error code 800736B 3 that I even tried closing disable my firewall and windows defender and it still will not be installed. I scanned my pc for any virus and possible hard drive errors but still cannot install. any suggestions?  I use mckafee and I have spybot search and destroy (nothing is set to automatic on it)

  kclady36,
  Given that the SFC found corrupt files and was not able to fix them, which leans toward a possible broader problem at hand.  You can follow the directions at the bottom of the article for System File Checker to replace corrupted files.

  Or you can reinstall Windows in one of two ways.
  You can do an upgrade to the current installation.  However, you need to remove all the service packs that are not on your installation media.
  The other choice would be a restore clean installation or factory, according to your support system.  If you make this option (which if it were me, would be my choice), you must back up all your data, then the reinstallation of the system and to get all installed updates and antivirus software and running upward, scan your data before you restore on the PC.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error Code 8E5E0147. Platform update for Windows Vista (KB971644) update for Windows Vista (KB973917) update for Windows Vista (KB976470) fail to install.

  This problem lasts for a long time and I'd like to update my Windows Vista.  Thank you for your time.

  Hello, I sent an email before for support, but I have no answer at all so I tell myself I'll try to ask my question here.
  I get the following error code (Code 8E5E0147) whenever I try to install the following updates for Window Vista.
  Update for Windows Vista (KB971644) platform
  Update for Windows Vista (KB973917)
  Update for Windows Vista (KB976470)

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  See this previous discussion about this error: http://social.technet.microsoft.com/Forums/en/itprovistasetup/thread/5d5084ec-78f6-427c-a146-91fcf72e3616

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• HP 15-r248nf: hdmi port not recognized on HP laptop after windows 10 update

  Need help! My laptop HP HDMI port does not work, apparently, that the HDMI is not recognized after the last windows 10 updated.

  Hi Lyn11,

  Thank you very much for your quick response. Yes, there are ways to find the product # and the n ° of the device.

  • On the desktop, (first screen of windows with all programs closed) Please press this key combination to bring up the system information which will also give the product # of the unit. Please, note it and n ° of the series unit. Don't post not your n ° of set of information on HP forums. Press the fn key (function key) and press "ESC" on the keyboard at the same time to bring up this information.
  • You may also locate in the bios. Please turn the unit off.  Wait a few seconds and as soon as you put it towards the up keep pressing the "Esc" key immediately, gently several times.
  • It will bring up the start menu. Then press the F10 key to go into the bios. The bios will also give the serial number information and product.
  • A third way to locate the product # would be to power down the device. Unplug the charger and remove the battery.  Then use a flashlight to look inside the compartment to locate the product #.

  Please visit these links which may provide more useful information.

  Link1: http://h30434.www3.hp.com/t5/Notebook-Audio/AMD-HDMI-port-on-dv7-laptop-is-lost-after-Win10-free-trial/m-p/5813013#M78967

  Link2: http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Boot-Device-Not-Found-Error-When-using-HDMI-cable-only/m-p/5803624#M139030

  I hope this helps. I would like to know how this happens. I hope the problem is solved without hassle and the unit works very well. Please keep me in the loop.

  Just to say thank youPlease click the ' Thumbs Up 'button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• 27 - 1110ea: Windows 7 update does not update

  Hello

  I did now 2 installs fresh with the HP recovery discs and both windows update does not work. I tried different patches from microsoft that I found online in this regard and nothing works.

  I don't know if it's related, but said SP1 is installed, but when I look in the installed updates it isn't here. If I try to uninstall from a command promt it says is not installed and if I try to install it from the microsoft download it says it is installed.

  It makes me crazy. I was expecting it to work from a clean install, but it doesn't.

  Any help would be great.

  Hello

  Welcome to the HP Support forum. Thank you for posting.

  If it says SP1 is included, it means it is included and comes with the system, so you can not unintall it - it is part of the system - built in. You will not see the updates installed because it's built, do not subsequently installed.

  It is a known problem that now when you perform a clean installation of Windows 7, the installation updates will be delayed. This is due because of many things including the fact that W7 is more priority Microsoft because of new OS on the juice of the horizon: like Windows 10. Some users have reported that after the new facility it may take hours of waiting until Windows 7 poster updates are available. But don't worry - they are not that critics and you shouldn't worry so much for them.

  I can offer a workaround is to:

  -Windows 7 update agent be manually updated to the latest version > > https://support.microsoft.com/en-au/kb/949104

  -Download directly from MS "April 2015 battery maintenance update" and install it manually

  > > https://support.microsoft.com/en-us/kb/3020369

  -Download Win 7 convenience roll update and install it manually

  > > win x 64

  http://download.windowsupdate.com/d/msdownload/update/software/UPDT/2016/05/Windows6.1-kb3125574-v4-x64_2dafb1d203c8964239af3048b5dd4b1264cd93b9.MSU

  > > win x 86

  http://download.windowsupdate.com/d/msdownload/update/software/UPDT/2016/05/Windows6.1-kb3125574-v4-x86_ba1ff5537312561795cc04db0b02fbb0a74b2cbd.MSU

  This update package, which combines updates dating all the way back to February 2011, is not be made available in Windows Update. If you install a Windows 7 system from scratch, you will need to go out of your way to download and install it. If you do not, Windows Update will download and install the updated way on day one by one, the slower, more tedious.

  You have now all the updates of Windows 7 since its initial release until may 2016

  After that, you try to install the new updates.

  I hope it works for you. Let me know how it goes.

• Reinstall the original software after Windows 10 update

  When I bought my HPE-180 t, it came with Adobe products already installed as part of the package I bought.  After the Windows 10 update, it became necessary to reinstall Adobe first Elements 8 and she asks a code that did not come with disks. What should I do?

  Windows 10 normally do that unless the application is too old.  Adobe Elements 8 first seems to be 2009, well before 10 Windows.  You may need to get a newer version.

• Windows 7, update services does not work

  I have a problem to update software in windows 7.

  I have a HP G72 laptop.

  I replaced my hard drive. 350GB, Western Digital 750Go digital West.

  -J' made an image of the C partitie (if it is 3 months, installed for the recovery partition, new updated worked after that).

  The new disk hard there however any possible updates of windows. (the bar is red on the left).

  -After that, I reinstalled the original image when the laptop was new (DVD image). Same result on updates.

  -Remove the folders from the dir c/windows/SoftwareDistibution, no results.

  -Checked the status of services: windows update is statred and in automatic mode.

  N ' tried microsoft 'Fix - it' no results.

  -updated the drivers intel, no results.

  -Downloaded System Update Readiness of windows to resolve the error (Windows6 1 - KB982018 - v3 - x 64). When installing, I get the error 0xc8000247. So I'm not able to install this software.

  Looked after errors in the CBS.log newspaper: found M²: cannot read the time value RptTime from the registry. [HRESULT = 0 X 80070490 ERROR_NOT_FOUND]

  Do a clean boot, without result.

  Does anyone know a solution to this problem.

  Thank you.

  Ed.

  Windows 7, update services does not, RESOLVED.

  The problem occurs when you change your hard drive for a bigger, in my hard drive of the case a GB Western Digital 340 WD 750 GB drive hard.

  For the Windows automatic updates again you need update the Intel Rapid Storage Technology Driverdriver. It will not be updated when you have intel check your drivers! For me, only the 9.5.6.1001 version worked. This driver can be found at http://support.hp.com/us-en/document/c02219204 .

  Versions available at https://downloadcenter.intel.com/SearchResult.aspx?lang=eng & ProductFamily = Software + Products & ProductLine = Chipset + Software & ProductProduct = Intel % c2% ae + Rapid + Storage + Technology + (Intel % c2% ae + RST) did not work for me (I tried the form version 12.8.0.106 08/08/2013.) Why does not the superior version is not clear to me.

  Good luck to solve you yours it took me two weeks to find it.

  Ed.

• A new username displayed on my computer after a windows 8 update.

  A new username displayed on my computer after a windows 8 update. A name I do not know or do not recognize. After the update, the screen showed 2 users, the name of 'John' and myself. It was not there yesterday, and I'm the only user. I also bought the new laptop so it may not be a previous user. Can someone tell me how to remove 'John' from my computer. I'll do a system restore & see if it works. In the meantime, if anyone has had this happen, do you?

  Spoiler (Highlight to read)

   

   

  Yes, thanks a lot! I had no idea what to do. My husband googgled problem & apparently, what happens with a windows update currnent. I appreciate your help. There are still a lot of window 8 I don't know yet. I am a person mentally XP.

• The console of Windows Server Update Services (WSUS) falls down when you search for updates and displays the following error message:

  An unexpected error has occurred.
  Click the node server reset to try to connect to the server again

  Event type: error
  Event source: Windows Server Update Services
  Event category: no
  Event ID: 7053
  Date:
  Time:
  User: n/a
  Computer:
  Description: The WSUS administration console has encountered an unexpected error. Maybe it's a transient error; try to restart the administration console.
  Cause
  This can happen if the application cache is damaged.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Vista update error endless loop

  I am running Vista SP1, Windows Update keeps trying to install important updates for Vista, but every time he tries, it fails and I get the following error message: "updates were not correctly configured. Returning from the changes.  Then it restarts and goes through him everything again and again and again!  Please help me to solve this problem as simply as possible.

  Here is what shows the history of the Update window:

  Update for Windows Defender - KB915597 (definition 1.49.2011.0) definition important success 1 / 17 / 2009

  Update for Windows Vista (KB956802) security is not Important 1 / 17 / 2009

  A security update for Internet Explorer 7 in Windows Vista (KB960714) is not Important 1 / 17 / 2009

  Update for Windows Vista (KB957388) has not Important 1 / 17 / 2009

  Update for Windows Vista (KB955839) has not Important 1 / 17 / 2009

  Update security for Windows Vista (KB958623) failure Important 1 / 17 / 2009

  Update for Windows Vista (KB958624) security is not Important 1 / 17 / 2009

  Update for Windows Vista (KB956802) security is not Important 1 / 15 / 2009

  A security update for Internet Explorer 7 in Windows Vista (KB960714) is not Important 1 / 15 / 2009

  Update for Windows Vista (KB957388) has not Important 1 / 15 / 2009

  Update for Windows Vista (KB955839) has not Important 1 / 15 / 2009

  Update security for Windows Vista (KB958623) failure Important 1 / 15 / 2009

  Update for Windows Vista (KB958624) security is not Important 1 / 15 / 2009

  Update for Windows Mail Junk E-mail Filter [January 2009] (KB905866) successful recommended 1 / 14 / 2009

  Update for the filter of junk e-mail in Outlook 2007 (KB959141) important success 1 / 14 / 2009

  Update security for Windows Vista (KB958687) important success 1 / 14 / 2009

  Windows malicious software removal tool - January 2009 (KB890830) important success 1 / 14 / 2009

  Update for Windows Defender - KB915597 (definition 1.49.1841.0) definition important success 1 / 14 / 2009

  Hi Amby,

  You can try to install the updates in Mode without failure.  To do this, please follow the instructions below.

  When the computer restarts, press F8 while it is starting up.
  In the Advanced Boot Menu of Options, select Mode safe mode with networking
  Once the computer starts in Mode safe, it will hopefully install the updates that you have problems with.  If this does not work, try the following steps to perform a system restore.

  1. Insert your Windows Vista installation disc in the disc drive and start your computer

  2. Press any key when the message "press any key to boot from the CD or DVD shows on the screen.

  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.

  4. click on repair your computer.

  5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next

  6. in the System Recovery Options dialog box, click System Restore.

  7. follow the System Restore Wizard and choose the appropriate restore point.

  8. click Finish to restore the system.

  Please let us know if you need more help, or have any other questions.  Thank you.

  Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot get windows or windows Defender Update

  I get the same error codes & I tried all the solutions suggested to update but none worked.  for the windows defender update I get error code 0 x 80240022 for microsoft update I get the 8024402C error code

  0x8024402C error code when you try to install updates on Microsoft Update or Windows Update Web sites
  http://support.Microsoft.com/kb/900936

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• C5180: All IN ONE PRINTER FOR WINDOWS 10 UPDATE

  I got a message from HP support updating Windows 10 for my printer.  When I completed the update, screen says that it has failed.  Update was for Windows 8.  I followed troubleshooting without result.  Printer for Windows 10 update is available?

  Contacted HP support line.  Apparently, even if my computer is new, he had a lot of viruses on it, causing it to be lazy, etc.  I paid a tax, the computer cleaned by HP online.  Computer works fine now.  I went back to 8.1 for Microsoft.  He suggested that I wait a few months than 10 has been out a while before trying again 10.  Focus on the upgrade of printer to 10 at the time.

• Error code 8E5E0147 for installation of windows security updates

  Hello. I noticed that no new updates have been installed on my computer (with the exception of all updates for Windows Defender but also the recent Microsoft .NET Framework Service Pack 1 and the .NET Framework family updates). Everything else, like security updates, have failed since January 13, 2009. I saw someone else who has had this problem for 9 months. The error code is 8E5E0147. Wndows update download and try to install the updates. However, once completed, it says "failed". I worry because my computer is not updated for April fool virus. Can I get any help here? I heard people say that maybe I need to ask a Windows installation CD.

  Thank you, Martin. The thing is that my .NET and service packs would have to install. Don't forget that my problem was not downloaded from the update, but the installation. I think I found the answer. My Norton Internet security and Antivirus had expired. When I got Windows security updates, I had no program to receive these updates. I renewed my subscription, and everything worked. It has not been easy. However. I had to keep doing updates on Norton security until I received the message "no new updates were found" after that, I got all the new definitions and update of WIndows was allowed to install thanks to the new KB for your help.

• Problem installing KB980408 - set up the parameters for custom: Windows Desktop Update

  After installing KB980408, the computer restarts, goes through the normal boot process, displays the Windows logo, and then goes to a black screen with a window:

  Custom settings

  Implementation of the custom settings for:

  The Windows Desktop Update

  and stay on it indefinitely (4 + hours so far). Moving the mouse on the screen shows the circular cursor "wait", and I am able to move the window around; I am also able to start the Task Manager and restart, but that's all.

  So I thought another reboot may solve the problem, but it doesn't... it keeps just hung to this window.

  No matter who else affected by it, or have solutions to try?

  I had this same problem on both machines. During his connection, this behavior began immediately after the KB980408 update has been installed. The solution I found is to ctrl + alt + delete, start taskmgr and kill the task of custom settings. Then you have to manually run explorer.exe (file--> Run--> Explorer.exe) and windows should load as usual. The next time that I rebooted and logged in Windows loaded as usual. I'm guessing that this problem is a "run once" task. However, updates are not supposed to make your computer more stable?