Similar Questions

• window vista boot blue screen stop: 0x0000007b (0x81e03ba0, 0 x 0000034, 0x00000000, 0x00000000)

  Cannot start PC, using Windows vista, download blue screen error stop: 0x0000007b (0x81e03ba0, 0 x 0000034, 0x00000000, 0x00000000)

  Hello

  1. do you get this error on startup or when working on the computer?

  2. are you aware or any hardware or software changes to the computer?

  Try to start the computer in safe mode and try to make a System Restore.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  System Restore:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  In addition, try and run the steps listed in the link below.

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly:

  http://support.Microsoft.com/kb/958233

• My computer windows 7 keeps blue screening

  My computer windows 7 keeps blue screening.

  Here's the info provided (any help would be appreciated!)

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode: 1000007e

  BCP1: FFFFFFFFC0000005

  BCP2: FFFFF800033689DD

  BCP3: FFFFF88003747818

  BCP4: FFFFF88003747070

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\021215-28891-01.dmp

  C:\Users\Mario Perez\AppData\Local\Temp\WER-59951-0.sysdata.xml

  Read our privacy statement online:

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  Try the following:

  1 perform the clean boot, and then check. See the link form more information:

  http://support.Microsoft.com/kb/929135

  2. If the problem persists, try to perform the SFC scan. Check the link for more information:

  http://support.Microsoft.com/kb/929833

  3. If the problem persists, try to update all device drivers. If no update is available, perform the reinstallation of the drivers: uninstall the drivers, reboot the PC, install the drovers, restart the PC and then check.

  4. However, if the problem persists, look in the dump file that was created (C:\Windows\Minidump\021215-28891-01.dmp), so to find the root cause of the problem.

• Windows 7 - Crash blue screen - STOP: 0X000000F4

  Hi all

  Windows 7 - Crash blue screen - STOP: 0X000000F4

  Screen shows e blue screen will display the following error code:

  STOP: 0X000000F4 (0XFFFFFA800C4C4B10, 0XFFFFFA800C4C4DF0, 0 X 0000000000000003, 0XFFFFF8000418FE20).
  I tried to restore the mode, the safe & all the option available to start properly.  Given that I have no DVD of windows 7 to re - install windows again.
  My question is as follows:
  -Is - error code says something.
  -A way to re - install windows without CD or DVD or save the image.
  -Also, I can read and access data from the C: & D: drive in cmd in restore mode guest mode.
  Waiting for your suggestions.
  concerning
  Jagdish kone

  Blue_Screen_image_.PDF

  Hi Philippe,.

  Thanks for your reply. I want to reinstall windows on the same SSD. Given that the SSD drive works great as external drive.

  So please could you confirm, how do I reinstall windows again. As I see there are recovery drive comes when I use the SSD as external drive.

  Waiting for your suggestions.

  Concerning

  Jagdish

• Updates to Windows Firefox blocking systems to blue screen since 09/02/10

  Since Windows 7 updates tonight (09/02/10) I have blue screen crashes when you run the Mozilla Firefox browser. It started just this evening with the latest Windows updates. I have reported this here and on Mozilla and hope that someone set quickly. If this isn't the case, I'll have to restore both of my laptops to the restore point before applying updates. We running Windows Home Premium 32 bit, and the other is WHP 64-bit, so I know the issue is not limited to one specific machine.

  Firefox bug Forum sent me this reply. Not specific to Win7, but leads me to think it may be something similar...

  This has nothing to do with your problem if you can start your computer Win7 (not Firefox) without getting a BSOD.

  CF. http://blogs.technet.com/msrc/archive/2010/02/11/restart-issues-after-installing-ms10-015.aspx

  Meanings not necessarily bear, if you experience one or more of the updates that you have installed on or after that 09 Feb-10 is at the origin of behavior...

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Home page of Security Support consumer & Microsoft Update Solution Center also offer support options
  https://consumersecuritysupport.Microsoft.com/
  http://support.Microsoft.com/ph/6527#tab3

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

• Satellite M30x - bootsequence Windows XP with blue screen

  I have the following problem: I have 2 different Satellite M Series notebooks of performance!

  The problem, that I wonder happens 100% of the tests, but after turning on the computer laptop and after the bootsequence - at the present time, that the windows XP logo appears - the system halts with a blue screen. Turn to restart and falls into the next blue screen.

  The only thing I discovered is that XP regularly also begins long switch WLAN hardware is turned OFF as soon as I turn this switch with Windows, the blue screen occurs immediately and the system runs out of oil.

  is that what is anyone able to help? -new review of pilots or any other solution to the problem would be appreciated!

  Hansjoerg

  Hey,.

  Congratulations, you have already found the problem! :)

  From my own experience, I can tell you that the same thing happened to a friend of mine. So he replaced the WLAN card with a new one and the problem has been resolved! Windows starts with WLAN turn on () correctly!

  What WLAN card is installed on your laptop?
  In Satellite M30x of my friend a WLAN Wireless Intel 2200 card has been installed. He bought a new one for little money on eBay and replaced it yourself because it s not very delicate.

  So take a look on eBay or other places. You can also ask a maintainer approved assistance if you are not familiar with the disassembly of the laptop.

• Windows error DRIVER_IRQL_NOT_LESS_OR_EQUAL blue screen

  A few days before I installed a StaadPro v8i program on my laptop.

  Then I got a blue error screen.  When I checked the dump files it shows and there is a problem in the tcpip.sys driver.  After you restart windows, it runs when I connect to the internet using LAN. Still, there is a blue screen error. I have seen a lot of questions about this error but I can't set out.

  Here is the https://skydrive.live.com/redir?resid=C201D4447F564EC%21108 dump file

  Please help me solve the error. Thanks in advance.

  Your operating system is corrupted. To eliminate the problems on your computer, you need to restore factory settings and rebuild your computer system.

  A recovery of the system partition contains a copy of the operating system as it was when the computer was purchased new. Using the copy of Windows 7, you can restore the computer to factory settings. Of course you must back up your data files to an external before restoring support as the process reformats the disk thus clearing all existing files before writing new files.

  Page 40 of the Manual:
  FTP://FTP.Hasee.com/English/Handbook/R14K%20English.PDF

  The download takes time, be patient.

  Instant recovery software

  No need to find a recovery CD to restore the settings of your software, it is already preinstalled on your hard drive for laptop. Simply follow the steps below and restore your laptop to factory settings.

  How to access your instant recovery software

  1. turn on your computer and press F4when Twinhead logo appears.
  2. click on Protect/recover the menu on the left.
  3. click on FirstWare Recover Pro Phoenix.
  4. the system restarts and will take 15 seconds until the next step is displayed.
  5. of Phoenix FirstWare Recover Pro Quick Start, click on the chosen backup.
  6. starting at Recover Pro, factory restore is the default selection. Click on restore.
  7. from the command prompt Recover Pro, click Yes.
  8 FirstWare Recover Pro will load.
  9. click on the disc to recover.
  10 prompt appears, click Yes.
  11. the recovery begins.

  Source: Page 40 manual

  When you have restored to factory settings you need to configure an internet connection, install anti-virus software, updating all the drivers from the web site of Hassee and install Windows all updates. Run Disk Cleanup and defragmentation of the intervals.

  You should then be able to reinstall the programs. With this in mind, make a list programs must be installed and make sure you have the means to do so. Make a list of what you need to do and the order in which you intend to do each task. This will help you greatly when you perform the operation. If you have the second computer available when you rebuild your computer system, it helps if you reach a problem and need to check online.

• Vista workaround to access restore partition of the system (0xc0000C1F5 Blue Screen of Death error)

  Stats:

  Computer type: HP-Pavilion a6333w

  Product #: KC746AA #ABA

  Operating system: Windows Vista™ Home Premium (6.0, Build 6000) (6000.vista_ldr.071023 - 1545)

  Processor: AMD Athlon (TM) 64 X 2 processor Dual Core 4800 + (2 CPUs), ~2.5GHz

  Disk space: 500 GB

  RAM: 3 GB

  Graphics card: NVIDIA GeForce 6150SE nForce 430 <-integrated on the mother board.

  ---------------------------

  Location: Try to update Windows Vista SP1 my computer hung up.  After a cold reboot, I got a BSoD (blue screen of death) with the error 0x0000C1F5 code.

  Current problem: whenever I try to boot Vista I get the same error during the vista loading screen.

  I tried the safe mode, the last correct log on the thing, and even a system restore disc that I downloaded from PC World.

  None of these online solutions have worked.

  ---------------------------

  Is there a way to bypass the default loading process and access the recovery partition drive to do a factory reset?

  If there is a way to save the info on my HD it please let me know.

  Thanks, Jcubed.

  Message edited by Jcubed on 11/12/2008 18:06

  I think the (BugCheck Code) code is 0x0000C1F5, and there's a Microsoft Hotfix for this:

  http://support.Microsoft.com/kb/946084

• Satellite 5100-201 problems Windows XP installation (blue screen)

  I have this computer and unfortunately I don't have access to the cd that came with the computer because my cousin has lost. I tried to install Windows XP Professional I bought and during the first installation of Windows XP is about to start I get this blue screen of death message: 0x0000007B (0xF7AFC63C, 0xC0000034, 0x00000000, 0x00000000)

  The computer was working before but but it was extremely slow and the dvd - rom was not recognizable by windows. I tried all the known windows corrections related to the lack of cd-rom drives, but nothing does the job. I can boot from the cd to boot from windows cd. and I even put updated then the bios to 1.90 1.60.

  I have the Toshiba installation CD? There is no other way to install Windows XP Pro? Must I use the Toshiba Recovery CD?

  Hello

  Before starting the installation you need to format the HARD disk or an entire partition. Then you can install your operating system with the original CD of Microsoft Windows XP. After this action, you can install the drivers from Toshiba. All the necessary drivers, you can find the Toshiba site.

  Best regards

• Windows XP Professional blue screen/loop

  I have a computer that I had difficulty. It has Windows XP Professional. As it starts, it passes POST, however it stops during the BIOS. And the start-up process in a loop. Before the loop is executed at the beginning, I'm able to see a flash of blue screen. I am not able to pause the screen fast enough to watch error numbers. However, with knowing that it is Windows XP Professional, I was able to boot from a CD to get to a command line to fix. I was located on drive C. I typed then helps the command to ensure that the orders that I knew would work. Seeing as both, I am aware of were there, I then typed fixboot. Once completed, I restarted without the CD. He is always in a loop. I followed the steps with the CD once more, but rather used the fixmbr command and rebooted without the CD. Shut up always. I, with my knowledge of computer science as a student of computer science and technology, came personally to the conclusion that it may be a corrupted registry. Would be using the manual system restore may solve the problem? If so, use the manual located on this url to use for this OS? http://www.technibble.com/how-to-disable-automatic-restart-for-bsod-if-you-are-unable-to-get-into-windows/. Thank you.

  I was able to fix the laptop. Thanks for your good help. It ends up being a hard drive error that I was able to fix by using MS-DOS. I was able to refine due to the use of the chkdsk command. Thanks again for your help.

• Windows Vista, several blue screen errors

  Original title: BSOD

  Good afternoon

  I have the BSOD. Here they are in chronological order:

  1 IRQL_NOT_LESS_OR_EQUAL 0X0000000A (0X0000001D, 0XFFFFFFC2, 0X82424EF8, 0X00000001)
  2 0X000000c4 (0x000000A0, 0X96AEEA58, 0x995FCEE0, 0x0D99EEE4)
  3 0X000000c4 (0x000000A0, 0X968F0DF0, 0x99406EE0, 0x053F1D0A)
  4 0X000000c4 (0x000000A0, 0X9A651638, 0x993C4EE0, 0x10AB65F8)

  Additional information:

  Windows Vista Service Pack 2

  DualCore Intel Core 2 Duo E8400 3000 MHz (9 x 333)

  Gigabyte GA-G33M-DS2R (2 PCI, 1 PCI-E x 4, 1 PCI-E x 16, 4 DDR2 DIMM, Audio, Video, Gigabit LAN)

  DDR2-800 DDR2 SDRAM

  BIOS: Award BIOS v6.00PG Modular

  Could you help me... don't really know what to do...

  Hello

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ----------------------------------------------------------

  BCCode: 0a 0x0000000A

  Drivers could be at fault, however the problems of disk or security/antivirus/antispyware products are
  just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
  The video driver or something affecting it would be questionable.

  At the end of this message, I'll post a bluescreen generic and in the next convenience store
  How do to update the drivers and BIOS but also to check memory message.

  -----------------------------------

  BCCode: 0a 0x0000000A

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

  Solve the problem

  If a kernel debugger is available, get a stack trace.

  To resolve an error caused by the faulty device driver or service system, BIOS

  1. Restart your computer.
  2. Press F8 to character-based menu that displays the choice of operating system.
  3. In the WindowsAdvanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

  To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

  1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
  2. Try disabling the cache in memory of the BIOS.
  3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
  4. Make sure that the latest Service Pack is installed.
  5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
  6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

  If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.

  Comments

  Before upgrading to a new version of Windows, remove all third-party device drivers and system services and disable any antivirus. Contact software manufacturers for updates of these third-party tools.

  BCCode: 0a 0x0000000A<-- read="" this="">
  * 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-

  ==================================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My Vista system crashes, blue screen on startup: irql_not_less_or_equal STOP: 0x0000000A (0 x 0, 00000002 00000001, 0x81AE8590)

  My Vista system was crushed, tried everything, but finally resorted to a recovery of the original factory image off the coast of the hard drive Partition. Everything seemed to go smooth but now I get a blue screen at startup: irql_not_less_or_equal STOP: 0x0000000A (0 x 0, 00000002 00000001, 0x81AE8590)

  Odd part is the system has two RAM slots, we have a 2 GB key and another has a 1 GB. Could not get the machine to start with two sticks in. Will start with a stick in each thin slot. Will not start no matter how they are installed if you are using the two RAM slots. Ran SFC/scannow. He found errors, that it cannot correct. How can I fix these errors?

  CBS log is large enough: what details should I post it to help you troubleshoot?

  Note: Were able to update the system, including the installation of updates Windows 128 and seems to be updated throughout the SP-2. I really don't want to run another recovery if possible.

  Thank you!

  Hello

  Perhaps you have different brands of RAM in your computer, and so it would not start with the two inserted Rams. Do a check for your specific PC memory that tells you what products work with your system.

  Follow the information in this article.
  Know what type of RAM you need

  In addition, updated BIOS.

  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If scan SFC did not fix the issue, I would say that you follow the steps in this article to fix it.

  http://support.Microsoft.com/kb/929833

  Regarding blue screen errors, follow the steps in this article that applies also for Vista.

  Resolve stop (blue screen) error in Windows 7

• Error KERNEL STACK INPAGE ERROR on Windows Vista SP2 blue screen

  Original title: KERNEL STACK INPAGE ERROR

  What can cause a crash with the KERNEL_STACK_INPAGE_ERROR message in a blue screen.  Ive had just a new hard drive installed.  Running Vista Home Premium with Service Pack 2.  Usually occurs when returning from standby or Hibernate mode.

  Hi JerryHines,

  This problem can occur if a requested page of kernel data could not be read on the paging file into memory, or the master boot record is infected with a virus.

  Method 1:  I understand that you have installed a new hard drive, run the disk check to repair bad sectors on your hard drive

  Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Method 2:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 3: Disable and re-enable the hibernation, see them steps outlined in the article below

  How to disable and re-enable hibernation on a computer that is running Windows

  http://support.Microsoft.com/kb/920730

  For more information, please visit the link below

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

  http://support.Microsoft.com/kb/950686

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  (Article applies to Windows 7, not valid for Windows Vista)

• Windows 7 Pro Blue screen

  This is the problem such as specified after the recovery, any help is appreciated.

  BCCode: 7f

  BCP1: 0000000000000008

  BCP2: 0000000080050033

  BCP3: 00000000000006F8

  BCP4: FFFFF80002A54D28

  OS version: 6_1_7600

  Service Pack: 0_0

  Product: 256_1

  Hello

  You have ZoneAlarm or any 3rd party firewall installed? If so, this could be the cause.
  Other antivirus/security programs could be at least partially responsible.

  This fix "could" apply however do not use if you are quite safe.

  Two drivers of platform using WFP (Windows Filtering) causes a computer crash when the
  computer running Windows Vista, Windows 7 or Windows Server 2008
  http://support.Microsoft.com/kb/979278

  Also check these:

  Stop error message when you run an application that transfers data using the UDP protocol
  in Windows Server 2008 R2 or in Windows 7: "STOP 0x0000007F"
  http://support.Microsoft.com/kb/981180/

  The General causes of errors "STOP 0x0000007F" (applies to Vista and Windows 7 as well)
  http://support.Microsoft.com/kb/137539

  ===========================================================

  For the methods of troubleshooting blue screen using BlueScreenView and MyEventViewer see my answers
  If this thread - top 3 RESPONSES (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  ----------------------------------------------------

  It's my usual BlueScreen convenience store.

  References to Vista also apply to Windows 7.

  BCCode: 0x0000007f with the parameter 00000008 7f usually means a hardware problem.

  Have you added a hardware or drivers updated recently? Check Control Panel - Windows
  Updates to see if all drivers have been updated it just before what is going on has begun.

  For 7f - this could be a problem of material such as uncomfortable cards or memory, while there are
  other causes. Power electric low could also lead to this. Use the troubleshooters above and below
  and when you get to the drivers and memory sections refer to my next message below and then
  go back troubleshooting if necessary. (Can't really do a lot for the hardware on your laptop).

  If a PC remove ALL power. Opening the case, remove and reinstall all memory cards and ALL
  cable (try not just to close) on both ends if they are accessible and on the device ends if not
  (remove the cables and the resettlement of help them to eliminate minor corrosion).

  Notice the 08 (double fault) as 1st parameter means there is likely to be two causes. Do not forget to
  Update your drivers manually as using discoveries only updates Windows certified drivers and Microsoft
  and device manufacturers are far behind in this process. NETWORK, WiFi, BIOS and video/display card update
  and other great pilots

  If a laptop or a PC, you will need to take a shop (not BestBuy or other BigBox stores) or your
  Support of the machine system.

  ----------------------------------------------------------------------

  BCCode: 7F 0x0000007F which is the same as 0x1000007F

  UNEXPECTED_KERNEL_MODE_TRAP bug control has a value of 0x0000007F. This bug check indicates that the Intel CPU generated a trap and the kernel could not catch this trap.

  This trap might be a bound trap (a trap the kernel is not allowed to capture) or adouble foul(an error occurred during the processing of an earlier fault, which always results in a failure of the system).

  Parameters

  The first parameter that is displayed on the blue screen indicates the number of trap.

  The most common trap codes are the following:

  • 0x00000000 or division by zero error, indicates that a DIV instruction is executed and the divisor is zero. Memory corruption, other hardware problems or software failures can cause this error.
  • 0 x 00000004, or overflow, occurs when the processor executes a call to an interrupt handler when the overflow (OF) is flag set.
  • 0x00000005, or limits check fault, indicates that the processor, then executing a BOUND instruction, determines that the operand exceeds the specified limits. A BOUND instruction ensures that a signed array index is within a certain range.
  • 0 x 00000006 or Opcode not valid, indicates that the processor attempts to execute an invalid instruction. This error occurs generally when the instruction pointer is corrupted and point to the wrong address. The most common cause of this error is hardware memory corruption.
  • 0x00000008 or Double fault, indicates that an exception occurs during a call to the previous exception handler. In general, two exceptions are handled in series. However, there are several exceptions that cannot be handled serially, and in this case, the processor signals a double fault. There are two common causes of a double fault

  
  CAUSE

  0x7F bug check occurs after the installation of a faulty or incompatible hardware (including memory) or if installed hardware fails.

  A double fault can occur when the kernel stack overflows. This overflow occurs if multiple drivers are attached to the same battery. For example, if two file system filter drivers are associated to the same stack and then again the recursively of file system, the capacity of the battery.

  Solve the problem

  Troubleshooting: If you have recently added the material to the computer, remove to see if the error recurs. If the hardware failure existing, remove or replace the faulty component. Run the diagnostics of material that does not have the system manufacturer supplies to determine which hardware component.

  The scanner memory is particularly important. Faulty or incompatible memory can cause this bug check. For more information on these procedures, see the manual of your computer. Check that all the cards in the computer are well calibrated. Use an ink eraser or electrical contact treatment, available in electronic supply stores, to ensure the adapter card contacts are clean.

  If the error appears on a newly installed system, check the availability of updates for BIOS, SCSI, or card network controller. These updates are generally available on the Web site or the hardware manufacturer BBS.

  Confirm that all hard drives, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

  If the error occurred after the installation of a new or updated device driver, you should remove or replace the driver. If, in this circumstance, the error occurs during the startup sequence and the system partition is formatted with NTFS, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console in order to access the file.

  Also to restart your computer and press F8 to character-based menu that displays the choice of operating system. In the menuof Advanced Options , select thelast known good Configuration option. This option is most effective when you add a single driver or service at a time.

  Overclocking (setting of the CPU to run at a speed higher than the nominal specification) can cause this error. If you have overclocked to the computer that is experiencing the error, return the CPU to default clock speed setting.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error. You can also disable caching memory BIOS to try to resolve the problem.

  If you have encountered this error during the upgrade to a new version of the Windows operating system, the error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version. If possible, remove all third-party device drivers and system services and disable all antivirus before upgrade you. Contact the software manufacturer for updates of these tools. Also, make sure that you have installed the latest Windows Service Pack.

  Finally, if all of the steps above do not resolve the error, take the system motherboard to a repair for the diagnostic facility. A crack, a scratched trace, or a defective component on the motherboard can also cause this error.

  BCCode: 7F 0x0000007F which is the same as 0x1000007F<-- read="">
  * 1304.html http://www.faultwire.com/solutions-fatal_error/Run-a-System-diagnostic-Utility-supplied-by-your-0x1000007F-

  ==========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  Hope this helps. |

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Installation of Powershell 2 on Windows Vista causes Blue Screen of Death

  I tried to install Powershell 2 on my Windows Vista Home Premium (with SP2) machine. I use the Windows6 package. 0-KB968930-x 86.msu. However, in the middle of the installation, I get a blue screen of death, and the computer restarts.

  I don't know if it is a help, but the problem report displayed when the machine came back to the top is as follows:

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  More information about the problem:

  BCCode: 1000008e

  BCP1: C0000005

  BCP2: 00000000

  BCP3: 8FB3DB9C

  BCP4: 00000000

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini073110-01.dmp

  C:\Users\Martin Lee\AppData\Local\Temp\WER-142803-0.sysdata.xml

  C:\Users\Martin Lee\AppData\Local\Temp\WER25F6.tmp.version.txt

  Hello CodeMunger,

  You can post on the Forum of Microsoft Powershell. Click here for a link to the forums.
  They may be better able to help with your questions.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think