Windows Update: do not install the updates-HELP

Similar Questions

• Windows XP does not install the automatic updates.

  Original title: kopieerfout

  After several years, my laptop with Windows XP does not install the automatic updates, giving only a mistake:

  "

  ER is een doing opgetreden bij het van het bestand ntoskrnl.exe copying

  Kan het bestand niet naar doelmap copying.

  Everything works OK.

  Thanks for your help

  Everything works OK.

  It seems that it is not... Why Dutch? You use or have the corresponding language version installed?

  Free translation of message:

  "An error occurred during the copy of the file ntoskrnl.exe
  Cannot copy file to destination... »

  Please note that ntoskrnl.exe is a process in the cycle of the initial startup on your computer program.

  Try to load your "last known good configuration".

  The issue is also known to be caused by a short circuit in the ground cable into the keyboard cable. Make sure that it is not the cause of your error by replacing the keyboard with another keyboard or just disconnect the keyboard from the computer. You can also look at your function "Add or remove programs" If KB2686509 <> http://support.microsoft.com/kb/2686509 > is installed.  Install manually if it is not.

  If the above doesn't help, try using the Sfc.exe tool - see here > http://support.microsoft.com/kb/310747

  Or run the Chkdsk tool - see here > http://support.microsoft.com/kb/315265

  If still no luck, you may need to restore the file ntoskrnl. exe as follows:

  1 - insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD is probably the procedure below does not solve your problem.

  2 - restart the computer and that the computer starts, you should see a message press any key to boot from the CD. When you see this message press any key.

  3. - in the Microsoft Windows XP setup menu, press the R key to enter the recovery console.

  4 - Select the operating system you want to set and enter the administrator password.

  5 - type expand d:\i386\ntoskrnl.ex_ c:\windows\system32

  6. - you will be asked if you want to overwrite the file, type Y and press enter to replace the file.

  7 - type exit to restart the computer.

  Hope this helps - good luck!

• Comments Windows 7 does not install the network driver?

  Hello.

  I downloaded latest Win7 RC and installed on a virtual machine in VMware workstation. It not installed the virtual NIC driver so I have no internet!

  I googled the problem and it turns out that some people have reported this problem, and it came with a solution which in turn off the virtual machine, remove the network adapter, turn on the virtual machine, turn off again, to add a new and finally turn on the virtual machine - as described in this forum:

  http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/b5843189-d519-4e8a-a4f8-f1e671b341b6.

  I did and I've also updated vmware workstation (I have version 6.5.2 build 156735) and updated tools vmware on windows 7 and nothing worked. I have an another vm with XP and everything goes smoothly with networking and fully operational internet.  I used the win7 help and he pointed out this particular problem: there is no device installed network driver? Any suggestions?

  Each virtual machine can be started by double-clicking its vmx file.

  It is a plain text file. You can open it in every good text editor. Do not use scamblers text such as WORD and nonsense.

  You can compare the vmx file with the list of material that you give to the man behind the counter to your computer-friendly dealer store.

  You can add line at the end of this file - make sure you just you have twice the same line

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• Windows 7 will not install the drivers or windows updates

  Hello

  I tried to update my iPhone 5 and in the middle of the update, when my computer tried to install a new device driver, the installation failed. I tried to use a flash drive I've ever used on my computer and its driver installation failed as well. However, I used the iPhone 4 friend (that I used to have) and it worked fine. It seems that my computer don't just install the new drivers. The drivers that I have used before still work. In addition to my driver problem, my computer will also not succeed a windows update. Download updates, but then when I restart the computer to apply the updates, it fails every time. Any idea will be useful. My phone is currently stuck in recovery mode and iTunes can't recognize it to restore it because of my driver problem.

  Thank you

  Hello Cara,

  This problem is usually due to any third-party security software that blocks the installation. I would like to know some information about this problem so that we could help youo more.

  1. what security software is installed on your computer?

  2. do you get any error code or error message? (Mention the error message)

  3. have you made changes on the computer before this problem?

  As a first step, I suggest you to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the fixit for the following Microsoft Fixit.

  The problems that the programs cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Method 2:

  Temporarily disable the security software and check if the problem persists.

  Disable the antivirus software:

  http://Windows.Microsoft.com/en-us/Windows/disable-antivirus-software#1TC=Windows-7

  Warning: If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  Try the steps in the following Microsoft Support article and check if it helps.

  How to fix problems with the Windows service install:

  http://support.Microsoft.com/kb/2438651/en-us

  Please reply with the status of the issue so that we can better help you.

• Windows 7 - can not install the updates for my computer

  Cannot install upgrads on my computer

  DDzajko

  Try to download it manually from http://www.microsoft.com/downloads

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Other suggestions:

  Reset Windows Update components:
  http://support.Microsoft.com/kb/971058
  http://support.Microsoft.com/kb/883825

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  In addition, you can temporarily disable your Antivirus during installation.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Win 7, stand-alone windows installer does not install the msu downloaded on my HD files.

  I have several MSU files that I downloaded on my computer.

  I click on them and the stand-alone windows installer goes into "searching for updates on this computer".

  2 hours later, still nothing.

  I know that people have problems with the update of win 7... Nothing works.

  So far is just sitting there looking for updates... He ran all night... Nothing... always to research.

  I can not find where Microsoft puts the installed update files... If the software distribution folder, which wiped out during one of my attempts to resolve this problem.

  windows update told me today there were new updates available, and then sit there for 6 hours trying to get them with no result...

  So if I can't even manually install MSU file, what can I do? Try to install the kb3102810 fix

  You can use internet explore and access the catalog M$ and bring the two,.

  That is to say a right click and run as administrator

  

  Then go to the catalog and the top search right for each update and allows them to basket

  http://catalog.update.Microsoft.com/v7/site/install.aspx

• Windows 7 will not install the driver for hp deskjet 6540

  I followed all the instructions on the site of HP and windows will not find and install the driver for my HP 6540. How to make Windows do what should or is there a reliable place to download the driver from?

  There is a driver recommended relatively complete for the Deskjet 6540 written by HP and Microsoft via Windows Update.  If the automatic install does not work, perform the following steps: connect the printer by USB.  Click Start, devices and printers, adding a printer, select the appropriate port and when the list of printers, click Windows Update in the lower right part of the dialog box.  It will take a few minutes for the update to complete, once that he choose the Deskjet HP (Hewlett-Packard no) 6500 Series.

  If for some reason you can't use the driver provided through Windows Update, you can download the driver from the Windows Catalog site.  The Windows Catalog site requires the use of Internet Explorer.  For the Dsekjet 6500 Series there are three drivers listed.  11.4 Mo is the x 86 32-bit driver.  11.6 Mb file is x 64 64 bit version.  13.9 MB file is the least common architecture IA64.

• Windows Vista will not install the usb driver for kobo reader

  I am trying to configure my reader Kobo following the indications, the PC does not allow me to install a USB driver for download, I tried many times

  but it keeps blocking.

  When you connect the device Kobo try to choose 'Manage the library', so the camera gets identified:

  http://kobo.intelliresponse.com/index.jsp?requestType=NormalRequest&id=1438&source=5&question=Do%20I%20Keep%20Reading%20or%20Manage%20Library?

• my computer will not install the update of security for Windows XP (KB2481109)

  Moderator before go Note: IE8.
  -----

  my computer will not install the update of security for Windows XP (KB2481109) can you help me.

  Hello

  (a) don't you try to install the update manually?

  (b) you get any error message?

  (c) don't you make changes to the computer until the problem occurred?

  (d) what anti-virus software is installed on your computer?

  I suggest you try the steps below and check if it helps

  Method 1:

  If you have installed a security software on the computer, then I suggest you to temporarily disable a software antivirus installed on the computer and check if the same problem occurs

  Note: Please make sure that you activate the software of Antivirus\Firewall after the test to keep your computer protected.

  Method 2:

  I would say as you try to perform the clean boot and then try to install the update and check if it helps, here is the link:

  http://support.Microsoft.com/kb/310353

  Make sure that return you the computer to a normal startup mode once it's done.

  Additional information: make reference in the link below:

  http://support.Microsoft.com/kb/2481109

  Hope this information is useful.

• Windows some updates not installed the 646 error code

  Windows some updates not installed the 646 error code

  See this previous discussion: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/5300b50a-dfcd-42fb-9785-ab52f2ee1796 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• SP2 for Windows Vista will not install. Receive error 800b0100 code. Windows Update has encountered an unknown error.

  SP2 for Windows Vista will not install. Receive error 800b0100 code. I already tried all possible solutions - disabled and even uninstalled McAfee Firewall disabled, ran the CheckSUR repeatedly (see below for the final analysis), tried to install from windows update, also downloaded the stand-alone MS pack, tried selective startup and hidden States of services, still nothing. It has been 2 days work on this. Help, please!

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22202
  Package Version 6.0
  2009-10-24 12:36

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum

  Control components store

  Summary:
  Seconds executed: 1241
  Found 4 errors
  CBS MUM lack count: 4

  Unavailable repair files:
  servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat

  Hello Yiratr,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  http://support.Microsoft.com/kb/956702

  That should do the trick for you.

  Thank you.

  Kind regards

  Augustine.

  "URGO".

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• Do not install the update for SQL Server 2005 Service Pack 3 (KB970892) security code error C0000005

  Do not install the update for SQL Server 2005 Service Pack 3 (KB970892) security code error C0000005

  This update didn't install when I used Vista and is still unable to install now, I updated to Windows 7.

  Have searched for a solution for months with no result. Reason why I updated.

  Any help much appreciated.

  DOUGY,

  Microsoft SQL Server 2005 Express Edition Service Pack

  Post here for assistance:

  http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/

  --

• Windows xp will not install updates

  I did steps 1 - 10f... updates of windows will still not installed. Stopped after attempting the installation of the update.

  1. IN the stop step #9 => did you uninstall .NET Framework 4 Client Profile , or you go to step # 10 has?

  2A. When you started to see #10f, were KB2570947, KB2616676, KB931125 (update root certificates) & the Malicious Software Removal Tool , the selected updates to be installed?

  2B. what (s) [including any error number] you got during the installation of the system failed?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Notwithstanding these questions...

  OPTION A: Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  OPTION B: There is a good chance that you see the effects of a hijackware infection!

  NB: If you had no installed anti-virus application or subscription has expired * when the machine was first infected * or your subscription has expired since or the machine is not kept fully corrected in Windows Update, don't waste your time with any of the below: go to OPTION C below.  A repair install won't help!

  Microsoft is sponsoring free, online (third!) for questions: http://supportservices.microsoft.com/support/services/virus_malware_removal

  OPTION C: Your misguided use of Wise Registry Cleaner, cleaner CCleaner registry and/or Ashampoo may have "screwed the dog" here.

  Follow the instructions in this post of mine in another forum (to-the-letter & in order!) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Note: The computer must not be connected to the internet or local networks (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you.  Good luck!

  1. uninstalled the .NET Framework 4 Client Profile
  2. one. Yes, these updates have been selected
  b. same error as before.  'A problem on your computer is preventing the updates being downloaded or installed' no error number.  Just say install again or try the troubleshooter.

  Option C seems the best option.  But if I get support should I only list the an a security update for windows xp kb2570947?

• Do not install the KB2686505 update

  Do not install the KB2686505 update

  Hello

  You receive an error message/code?

  You did changes to the computer before the show?

  As a work-around I suggest you refer to the following method.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attack.

   

  Method 2: Perform a clean boot before proceeding with the update of windows.

  Note: After the boot minimum troubleshooting steps, restore your computer to Normal startup mode.

   

  Method 3: Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

   

  Method 4: Let us first start the SFC scan and check if there are any file system corruption. You need windows XP disk to perform the analysis.

  1 put the Windows XP CD in the CD-ROM.
  2. click on 'Quit' if the auto-menu appears.
  3. click on 'Start', then click on 'run '.
  4. Type "SFC/scannow" (without the quotes) in the "Open" box, then click on 'OK '.

  Note: There is a space between "SFC" and "/ Scannow".

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  More information on SFC scan found in this document:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  You can also manually install the update (numbers KB) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

• Error: "Windows Installer is not installed properly' & error code Ox641 for Windows Update.

  Original title: my "Windows Installer is not installed properly.

  I can't update my XP computer because my "Windows Installer is not installed properly. All facilities Microsoft Update failed (code Ox641). I wouldn't change anything. Help!

  Hi Mark,

  Did you do any hardware changes or software on your computer before this problem?

  You can follow this link & check if the problem persists:

  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation

  Reference: You can not install updates from Windows Update, Microsoft Update, or by using the auto update after a repair install of Windows XP after you install Windows XP SP3 immediately after a new installation of Windows XP SP2 or

  Because of Windows Installer, you can follow this link & check if the problem persists:

  Error message "Could access the Windows Installer Service" when you install the application

  Hope the helps of information.

• Do not install the updates downloaded, they are put to day security, also updated Vista, also update the junk e-mail filter

  Vista: Do not install the updates downloaded, they are day security, also updated Vista, also update the junk e-mail filter. Other updates are installed. But these not installing. These updates: update for Windows Vista (KB2679255), update for Windows Mail Junk E-mail Filter [April 2012] (KB905866), a security update Cumulative for Internet Explorer 9 for Windows Vista (KB2675157), update security for Windows Vista (KB2653956), a security update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x 86 (KB2656374)
  Please if you have an answer.
  Thank you
  Michael.

  Hi Michael,

  ·         You receive an error message or error code?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to consult the article in the Microsoft Knowledge Base and check if it works.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

   

  Method 2: If the method above does not help, then you can reset the Windows Update components and check.

   

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Let us know if that helps.