Windows Update will not be updated, and then will not start

Similar Questions

• Windows update, and I can't start windows... get the BSOD when I do anything

  I've updated windows vista the other day on my computer laptop vaio sony, and since I rebooted it, windows will not start. Repair does not work, safe mode bothers me the BSOD, also when I try to go to last known good configuration it also gives me the BSOD. My laptop did not come with additional recovery disks or or Vista install disks.

  Hello sportfreak2092

  restore your computer safe mode
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  all the best!
  Mark as answer if it helps

  Addison

• Software missing Notifications in Windows Update and Microsoft Update.

  I am running Windows 7 Ultimate 64-bit and options to get updates of Microsoft products and the new software is missing.  How can I fix it?

  Hello

  I understand that the option for Microsoft products and new software is missing, and I'll be happy to answer your query. We will try the steps below and check.

  Step 1: Try to update Windows Update agent such as documented here:
  http://support.Microsoft.com/kb/949104

  Step 2: Restart the Windows Update service. To do this, follow these steps:

  a. the logo-press Windows Key + R to open the run.
  b. type services.msc in the run box, and then press ENTER.
  c. right click on Windows Update in the Services management console and then click on stop.
  d. After Windows Update, click Windows Update and then click Start.

  Step 3: Wait for Windows Update to start and check the Windows Update Agent is updated. For more information on how to check what version of the Windows Update Agent is installed, go to the section 'How to check which version of the Windows Update Agent is' in this article of knowledge Microsoft (KB).

  How to check what version of the Windows Update Agent

  1 open the %SystemRoot%\System32 folder. SystemRoot is the folder in which Windows is installed. For example, the folder % systemroot is C:\Windows.
  2 right-click c:\windows\system32\wuaueng.dll and then click Properties.
  3. click the Details tab and look for the version number of the file.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• I try to run windows update and it will not update gives error code 80070005

  I try to run windows update and it will not update gives error code 80070005, I also ran fix and it tells me that it is fixed but it is not getting the same error code when I try to update after running it help please?

  Hello

   
   
  
  1. which Microsoft Fixit did you?

  2 have you installed new hardware or software before the show?

  3. who is the antivirus installed on the computer program?

  4 update you are trying to install?

  5. are you logged on as administrator on the computer?

  
  If this isn't the case, I suggest you to log on as an administrator and check for the issue.
   
  Method 1:
  One of the other reason for the 80070005 error is caused by software running on your computer security.
  Temporarily disable the security software on the computer and see if that makes a difference.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2:
  I suggest you perform the steps described in the article:
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
  http://support.Microsoft.com/kb/968003
  This problem may occur if access is denied when accessing or copying files during the process of Windows Update or Microsoft Update. Access may be denied if you have logged on to the computer as a standard user and this account does not have permission to install updates. I suggest you to follow the steps and check if it helps.
  
  Method 3:
  Perform a clean boot, and then check if it helps.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  See also:
   
   
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
   
   
  I hope this helps.

• updated Windows, it does not update these files each time that I update and then restart my PC, she just asked me to update their new please help

  MSXML 4.0 SP @ a security update (KB927978)

  A security update for Microsoft XML Core Services 4.0 Service Pack 2 (KB954430)
  Update for XML Core Services 4.0 Service Pack 2 (KB973688) Micrisift
  He will not update these files each time that I update and then restart my PC, she just asked me to update again please help

  Hello

  · What status appear in the historical versions?

  a. Click Start, in the search box, type in update

  b. click on windows Update

  c. click view update history

  Follow the steps from the link that has steps on how to troubleshoot Windows Update or Microsoft Update when you are repeatedly offered an update: http://support.microsoft.com/kb/910339

• I welcomed upcoming window for an update and then they took down my firewall and all my sucurity for a vista 2011 junk and want me to pay. Why and how can I go back?

  I welcomed upcoming window for an update and then they took down my firewall and all my sucurity for a vista 2011 junk and want me to pay. Why and how can I go back? IT DON'T ME LET HIM DO ANYTHING. I'm using another computer to do this because it won't let me go on the internet or access all programs! I don't want to buy the secuirty cause im going to buy another computer soon as soon as sales are made. but I need this one until I can do my school work and Exc...  any help?

  Makes it look like one of these:

  http://www.bleepingcomputer.com/virus-removal/remove-win-7-AntiSpyware-2011

  http://www.bleepingcomputer.com/virus-removal/remove-Internet-Security-2011

  If this is not the case, see if you can find it in this list

  http://www.bing.com/search?q=site%3Ableepingcomputer.com%2Fvirus-removal%2f+Vista+2011&QS=n&SK=&SC=5-51&form=QBRE

  Use the instructions in the manual. Do not download anything from advertising on the page.

  As you can not access the Internet, you will need to download all the tools you need on another computer and transfer on the computer infected with the help of a USB Flash drive.

  You can also try the Microsoft System Sweeper Standlone:

  http://connect.Microsoft.com/systemsweeper

• Installed a Windows Update and now 5 Lightroom keeps showing an error message, and then exits.

  Windows Update and now when I try to open Lightroom it gives me a message that says "Lightroom has encountered an error when reading it is an overview of the cache and will try again during the reboot" reboot is not good at all.

  The problem you are experiencing is not related to an update of Windows. The preview cache is corrupt. You must use Windows Explorer or the Finder to open the folder that contains your catalog. Find the folder that has the extension .lrdata and delete the entire folder. Then, launch Lightroom as you normally would. Lightroom will be in the construction of a new Preview file and you should be able to continue normally.

  I don't know the reason, but a lot of people have experienced this same problem. Take a look at the more "like this" list to the right of this message. It is more common than you might expect.

• Just did my laptop, tried to do windows updates and get a message T "here has been a problem the site witt" and can not open the page I requested at this time.

  Just, I redid my laptop using my system recovery disks. I went to windows update and get this msg when I click on Express.com: the site has encountered a problem and cannot display the page you are trying to view.

  Original title: I redid all my laptop. I went to windows update and get a message that says: there was a problem witht the site and I wanted that the pag can not open the page I have requessted at this time.

  You must download and install Windows XP Service Pack 2 (if not already installed) followed in Windows XP Service Pack 3.  You will find two of them at http://www.microsoft.com/downloads - download the "Network Installation Package" for the two and ignore the part about them being only for the professionals - the parcel I recommend you download will install with or without network connection.

• Start of Windows to install updates and then fail, restores the installation then the cycle starts again.

  original title: I continue to receive updates for Windows. Updates begin to install fail, updates to day is awarded automatically installation and then the cycle starts again.

  This process takes about an hour, during which I can't use the laptop.

  Hello

  ·         Update is causing the problem?

  ·         You get the error message?

  Method 1:

  Try to install the update to the clean boot and check if it helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135/en-us

  Note: Don't forget to start your machine in normal mode by following step 7 of the link.

  Method 2:

  You can try temporarily turning on all security software and then try the updates again.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

   

  Also refer to this article and check if it helps:

   

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• I'm doing a windows update and I get Windows could not search for new updates... errors found... Code 80244019

  I'm doing a windows update and I get Windows could not search for new updates... errors found... Code 80244019... Can someone help me please

  How to troubleshoot problems connecting to Windows Update or Microsoft Update https://support.microsoft.com/en-us/kb/818018

• Windows Vista does not start after Windows update

  I am running windows vista on a PC laptop toshiba l300.  He did an automatic update of windows and this morning when I turn it on it will not load.  It comes with a screen saying download of updates please do not turn off your computer.  then, he turns his car on and keeps recycling through the same thing.

  I tried loading in safe mode, but it does the same thing in that. I also tried selecting the option, the last load charge effective network via the F8 key but again that has not worked.    I have not all disks with the laptop, so I don't have a vista disc.

  I'm not very computer and have done everything I can think off.

  can someone point me in the right directioin.

  I working on my main pc at this time and did the updates of windows to be sure it's XP

  Janhsmn,

  If you do not want to install updates on your computer, you can select the "Hide" option and it will ignore them in the future and continue with other updates. Do not forget that the reason why the updates could be the cause of this problem would be because as a conflict with a third-party software. And most likely will not affect both your systems in the same way unless you have the same third party software installed on all your machines.

  To hide the update in Windows Vista, please follow the steps below.
  1. click on 'start '.
  2. Type "Windows Update" and press on "Enter"(on the keyboard) ".
  3. Select "Search for updates"
  4. Select "View available updates"
  5 right-click the update that is causing the problem and select "hide update"

  Please let us know if you need more help.

  Thank you, Carlos
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 70080001 happens when I do a windows update and only goes to 7% help!

  When I do a windows update it starts and then says windows encauntered an error with the 7008001 code what should I do to fix this

  Please confirm the error code,

  1. Open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. In the left pane, click view update history.
  3. Find an update for Windows that has failed to install, and then double-click the update to view more information.
     Updates that have failed to install will display failed under status, next to the name of update.
  4. In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.

  Have you tried the troubleshooter WU
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  BTW - http://support.microsoft.com/kb/2416400
  Note the page will take a while to load, it describes some problems with this particular update and how to get help and provides some FixIt.

  Good luck.

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• New computer with 7 installed - tried windows update and stuck saying preparation set up windows

  Just bought a new Sony Vaio with windows 7 installed and went to windows updates, as they recommended. Updated and said to reboot. Now he's stuck saying prearing to set up windows. Not turned off your computer. Help please...

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  Here you need to start your computer in safe mode and do a system restore.

  Start the computer in safe mode and check the number.

  Follow this link provided below to start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  You have to try to perform a system restore to go back to the work settings, to do that follow the instructions below:

  1) click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  (2) in the System Restore dialog box, click on choose a different restore point and then click Next.

  (3) in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4) click Finish.

  If you still have the problem then we will try to reset the windows update components and find the number.

  You must follow the link provided below to run the fixit which will automatically fix the problem if you find problems with the fixit, then you can follow the procedure to manually reset Windows component update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/default.aspx/KB/971058

  Once the Windows Update components are reset, try to reinstall updates. To do so,

  1. open Windows Update by clicking Start , all programsand then click Windows Update.

  2. click on the option to change the settings in the left navigation bar. You will now be on a screen where you will be able to set up how Windows Vista download and install updates on your computer.

  3. Select updates but let me choose whether to download and install them. When you have finished setting options that you want, press the OK button to save these settings. You will now be at the main screen of Windows Update.

  4. in the left pane, click check for updates, and then wait while Windows searches the latest updates for your computer.

  5. you can then download the updates one or both.

  6. click on install updates to install updates currently selected.

  7. Repeat steps 5 and 6 until you get all the updates you want on your PC.

  For more information about installing the windows updates, see

  Install Windows updates

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• I tried for weeks install windows updates and get this message error (s) found: code 80070645 windows has encountered an unknown error. How can I solve this problem?

  Windows Update
  Error (s) found: code 80070645 windows has encountered an unknown error.
  I had before the shock of two antivirus this proven system restoration started but no help.
  Fix it to charge microsoft, but has not helped any.

  How can we if this problem, so I can install the updates I need?

  Hi Wyattsdaddy,

  Thanks for posting your question.

  Step 1: Check if Windows update-related services are set to automatic and started.

  Click Start, type services.msc in the start search box, right-click to services.msc, and then click Run as administrator.

  Check the above services below:
  (a) Background Intelligent Transfer Service
  (b) cryptographic service
  (c) Windows Update

  Step 2: Rename the Catroot2 folder

  To rename the Catroot2 folder, follow these steps:

  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
  2. at the command prompt, type the following commands and press ENTER after each line:

  net stop cryptsvc
  Ren %systemroot%\System32\Catroot2 oldcatroot2
  net start cryptsvc
  output

  3 remove all tmp*.cat to the following folder:

  % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

  If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

  Important: Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

  Step 3: Reregister DLL files that are associated with Cryptographic Services

  To register .dll files that are associated with Cryptographic Services, follow these steps:

  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.

  2. at the command prompt, type the following commands and press ENTER after each command:

  regsvr32 /u softpub.dll
  regsvr32 /u wintrust.dll
  regsvr32 /u initpki.dll
  regsvr32 /u dssenh.dll
  regsvr32 /u rsaenh.dll
  regsvr32 /u gpkcsp.dll
  regsvr32 /u sccbase.dll
  regsvr32 /u slbcsp.dll
  regsvr32 /u mssip32.dll
  regsvr32 /u cryptdlg.dll

  regsvr32 softpub.dll
  regsvr32 wintrust.dll
  regsvr32 initpki.dll
  regsvr32 dssenh.dll
  regsvr32 rsaenh.dll
  regsvr32 gpkcsp.dll
  regsvr32 sccbase.dll
  regsvr32 slbcsp.dll
  regsvr32 mssip32.dll
  regsvr32 cryptdlg.dll
  output

  Note: Click OK if prompted.

  Restart the computer.

  Step 4: Empty the software distribution folder

  1. Click Start, type services.msc in the search box, click services.msc, and then click Run as administrator.
  2. in the Services (Local) pane, click Automatic updates and then click on stop.
  3. reduce the Services (local) window.
  4. Select all the contents of the Windows distribution folder, and then delete them.

  Note: By default, the Windows distribution folder is located in the drive: \Windows\SoftwareDistribution folder. At this location, the drive is a placeholder for the drive where Windows is installed.
  5. make sure that the Windows distribution folder is empty, and then enlarge the Services (local) window.
  6. in the Services (Local) pane, click Automatic updates, and then click Start.
  7 restart the computer, and then run Windows Update again.

  Item appraised: http://support.Microsoft.com/default.aspx/KB/822798

  Step 5: Disable the security software
  Note: You can enable it later.
  Step 6: Scan Run SFC
  Please follow the steps below to the auditor of the filesystem as the first steps:

  1. Click Start and type cmd in the box start the search.
  2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.
  3. at the command prompt, type Sfc/scannow, and then press ENTER.

  Note: The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista CD.
  http://support.Microsoft.com/kb/949104/

  Step 7: Components to reset Windows Update
  http://support.Microsoft.com/kb/971058

  Let us know if that helps.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• After auto update installed, Windows Vista does not start

  Individuals:
  Windows Vista Home Premium w/Service Pack 1 installed
  Dell Studio 1737, 64-bit

  Problem:
  Earlier this week (I think it's the 16th), my computer has installed an automatic Windows Update and restarted.  When she came back to the top, it says Windows could not start and asked if I would so he can try to restore the operating system to a previous point in time or if I try to restart Windows.  I tried to start Windows again (this time with my fingers crossed), but got the same message.  So I went for the #1 option and after half an hour, or so, I got a new error.  To be honest with you, I have seen so many mistakes in the last week, I don't remember exactly what he said, but I wanted to go to the advanced options, where I could choose a restore point manually.  I have put back to point restoration 6/15 and had no problem getting Windows to start.  Unfortunately... Windows REALLY asks me to install this update so at 03:00, after spending at least an hour and a half on the issue, he did an update automatic, rebooted and Windows wouldn't start again.  So, again, I am through the whole process (it's the only way I found to manually choose a restore point) and me to start Windows.  Then I disabled the automatic update in the hope that I could skip this update.  However... Windows has put the updates to install every time I put it in mode 'sleep'.  You can see where I'm going with this.  Now, any time my computer stops for some reason, Windows refuses to restart.  To make matters worse, the last time I had to go through this process, for some reason any he would not support up to 15 and I had to try again and it backwards until the 13th.  Please help me!

  You did little to restore the system.

  Hide this particular update, if you do not need!

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the bad.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  Mick Murphy - Microsoft partner

• Code 10: Your device cannot start - CD/DVR. It was working fine until I did a windows update and it stop working.

  Code.10; Cannot start your device - CD/DVR, it was working fine until I did a windows update and it stop working.

  Original title: code 10

  Hello

  Read this link which has also a few solutions:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  --------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">