Remote Camera Control (RCC) & intervalometer A7

Similar Questions

• Windows version of Remote Camera Control Ver.3.2

  Which models are compatible with sony of tethering software (version of Remote Camera Control Ver.3.2, or a later version of Windows)

  Version 3.2 of the remote camera control software is compatible with the following models:

  • ILÇE-5000
  • ILÇE-6000
  • ILÇE-7
  • ILÇE-7R
  • HI - A58
  • HI-A99/A99V

• Why is it not possible to use SIRI on my apple TV remote to control the HomeKit products? I should be able to control all the devices with my Apple TV remote and SIRI HomeKit!

  Why is it not possible to use SIRI on my apple TV remote to control the HomeKit products? I should be able to control all the devices of HomeKit with my SIRI voice remote control and using Apple TV!

  If the new apple TV can act as a concentrator HomeKit and I use SIRI on my iPhone to control my locks, thermostat, lights, etc. Why am I not able to do the same thing with SIRI via voice commands on my Apple TV remote? When is this going to work?

  Also, when Apple will come out with a response to the echo of Amazon? I've tired to wait... do it already! If you build it, they will come...

  Thank you!

  This is a community to a user, and Apple will not see your rant. If you have suggestions about Apple TV, Siri and HomeKit the best thing to do is to submit your comments here. http://www.Apple.com/feedback/AppleTV.html

• Internet Explorer 8 and cannot run the AXIS ActiveX camera controls in streaming videos

  While I can't verify this with certainty, it seems that since I upgraded to IE 8, I can run no longer videos using the camera AXIS ActiveX controls.  I get the error: "The AXIS ActiveX Camera Control, which allows to display live image streams in Microsoft Internet Explorer, can not be saved on your computer."  I checked under Tools-> Internet Options-> click the Security tab and then activated or has requested to be invited to everything related to the ActiveX and it does not clear the problem.  Oh and I'm running on XP.

  Thank you.

  Hi nbundy,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to XP and would be better suited to the XP community. Please visit the link below to find a community that will provide the support you want.

  Forum XP

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro/

  Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect: Remote Desktop control problem

  Original title: remote desktop control problem

  Hello, I am based in Bulgaria and I am trying to connect to the computer of a friend who is in the United Kingdom. He provide me with all the PC name, user name, and password information. I've tried almost everything I find in your site and the forum but still cannot connect and he can't understand where is the problem. I'll be more than happy if you could help me with this Russia.

  Kind regards

  Ivan Karchev

  Hello

  I suggest you to post your query on our Forums TechNet social as this question should be better there.

  Please refer to the reference to the link below to send your request:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Hope this information helps.

• C40 Camera control maximum length of cable RJ45 to d - SUB

  Hello

  What is the maximum cable length for the control of camera on a Cisco C40 port?

  Thank you

  Kyle

  According to the PrecisionHDMC camera Guide, page 17, the camera cables that usually come with codecs can be 5, 6.5, or up to 20 meters.  Anything more than 5 meters requires the camera powered by the power of the camera and not the codec using the camera control cable itself.

  I have a few installs custom where the camera control cable is well up to 75-100 feet.  Just follow the outputs pins on the same page as above to make your own cable and don't forget to use the POWER-CAM-V = power supply to power the device.

• Sony Bravia 4 K Ultra HD model XBR-43X830C & remote control RCC-TX100U - don't pair / work! Help!

  I bought (via Internet) remote control Sony RMF-TX100U touch pad to pair upward with my Ultra model HD Bravia Sony 4K 43 '' TV XBR-43X830C, since the remote control of the touchpad does not come with this TV in particular. I followed all THE procedures of paved remote reset touch that is to remove the batteries, batteries, hold down the respective buttons and receive the flashing red light (twice) on the remote control, I did. Also, I did reset the TV rather than unplugging it. On television, I went to settings, remote and followed the onscreen but which are basically press and hold the Volume - button and then press the "microphone" button while continuing to hold down the key, - Volume for three seconds, remote pointed at the IR receiver TV. I did it over and over again and nothing happens! I find NO Google search solutions to this problem. Can anyone advise of alternatives to get this remote touchpad to play nice with my Sony TV? I'm assuming that this remote is COMPATIBLE with this particular set? Some say yes, some say no. Please advise. Any help will be greatly appreciated. Thank you in advance!

  Doc technical marketing for your TV on the Sony site.

  https://docs.Sony.com/release//specs/XBR43X830C_mksp.PDF

  Shows:

  Optional accessories

  Remote control Touchpad (RCC-TX100U)

  Cable MHL (DLC-MC20)

  Subwoofer (SWFBR100) wireless

  4 K Media Player (FMP - X 10 (for the USA. only))

  Should work.

  Try to make a power-pull reboot... turn TV off, draw power for a minute, plug in and restart.

  Put different batteries in the remote control.

  Try again.

  If it doesn't work, distance could be faulty.

• Multiple camera control

  I can control several hdr as15 both with the remote application?

  Hello

  The PlayMemories Mobile application is designed to work with one device at a time. Use it to control several Action Cams at the same time is not supported.

  If my post answered your question, please mark it as an "accepted Solution".

• IOS App Remote - Volume control issues

  OK, so I downloaded the app recently released for Apple TV IOS. Everything works as expected, except the inconsistent Volume control.

  I have two Vizio TVs in my house - E701i-A3 and models M401i-A3. The volume via IOS app works perfectly on my E701i-A3 - pressing iPhone volume buttons triggers change in volume on the soundbar attached to this set.

  No luck with my M401i-A3 not set - by pressing the volume iPhone buttons does cause changes in local ringtone volume iPhone... that tells me something is not right with audio control EAC between ATV4 and the TV set. I do not use soundbar with this set - internal speakers only.

  Both sets are running the latest firmware of Vizio and CEC/audio is enabled. No problem to control the volume or turn the sets/turn off via the remote Siri material.

  Kind of ideas here... anyone have any ideas as to what the problem may be with my Vizio M401i-A3 defined? Someone at - it got IOS volume remote control works with other models of TV?

  Volume control requires HDM - CEC to ensure compatibility. It is quite possible that only one of your TV is compatible.

• You can use a 2016 Samsung Smart Bluetooth remote to control your Apple TV?

  I have a 4K of 2016 Samsung TV and it comes with a remote bluetooth device smart. Does anyone know if it is possible to avoid having to use this remote and Apple TV remote and the Smart remote control the Apple TV as well?

  There is no option in the Apple TV settings to learn a remote Bluetooth.

• FCPX - captured live from a remote camera?

  Experience scientific, a little dangerous.  I have a Sony FS700 camera trained on experience.  I want to be able to run a USB cable from the camera to a control booth closed about 20 feet.  I want to be able to control the camera from a Macbook Pro.  I also wonder if there is a way to capture data that is ensuites directly into the computer (on an external hard drive) using the may output HDMI Cable? ... I remember that old Final Cut get live data from a camera.

  FCPX do something like that?

  Or maybe someone has a suggestion how it could be done?

  All ears,

  Ben

  FCP X cannot capture alive from a camera via USB. In fact, USB does not have the live video from the camera anyway, so no software can't.

  You can take the output of the camera, but you would need a HDMI input device. The HDMI on the MBP is for * output *, do not input.

  If you get a device like BlackMagic UltraStudio MiniRecorder, then you can use the BlackMagic software save and then import the resulting in FCP X film.

  PS: Really you run 10.6.8? What model is your MBP?

• Is it possible to set up an Apple TV Remote to control an iPad Pro?

  Hello

  I'm looking to put up an Apple TV remote be able click through a presentation of the iPad... Is there a way to define who, perhaps even to the control through an album in the Photos app? Or would I need to get the remote bluetooth?

  Keynote support remote Apple of a presentation.  The keynote app has the built in control.  You run keynote on two devices: love your phone and your ipad.

  The ipad does not support a generalized remote.  There are no remote access connection on the ipad.  Any departure is limited to applications that have generated the function in their application.

  R

• The movement of my robot can be controlled by the entry of a camera control in labview?

  I'm new to mindstorms and I'm trying to interface a camera that I can easily control in Labview with the NXT unit movement.  I want this to be real time.  What is the best way to get Labview to send commands that get immediately updates implemented by unity NXT?  Thank you.

  Sorry - fact.  Thank you.

• blackberry camera control

  is it possible to control the camera from blackberry in my program?

  Yes, device with OS 4.6 and a greater willingness to support the picture of the camera using your application. You can give a look to "camerademo", which is shipped with JDE 4.6.

• Helps the camera control

  Animal crackers, trying to control the cameras in AE is crazy crazy and intuitive.

  I can't turn around an object, from the point of view itself.

  After some modifications, the rotation parameters seem to sense, as if they were in a sort of gimble lock.

  Someone please tell me something good...

  I'm just trying to create a simple camera on a 3D text movement.

  Element of learning 3d, just the layer of the element with a default camera...

  Thank you

  To make precise camera moves, on the set, I put the camera on a Dolly, move the carriage and change the way the camera points. Make the precise moves camera AE I have parents a 3D 'dolly' null for the camera first now buy the SHIFT key if null and the camera are in the same position, then I cancel parenthood and to the "dolly" the parent of the camera so I can move the camera with the null value.

  Then I add a 'focus' null in 3D to the timeline and set the point the camera of interest to null with an expression. I also attach focal distance to null to an expression. Now you can adjust and animate the camera position to the value null in the arrow pointing upwards or downwards, move the carriage to move the camera and animate the null of development to address the development and where the points of the camera by using the null object. EZ PZ.

  I don't have the time to show you the expressions but they are pretty simple. You set the point of interest as you drag the pickwhip. Length allows you to set the focus distance.