Windows vista System 32 - a1723w Office back to top
Windows didn't start because the following file is missing or corrupt: \system32\hal.dll
Hello It is for XP, but also works for Vista: http://pcsupport.about.com/od/fixtheproblem/HT/restorehaldll.htm or watch this video: http://www.YouTube.com/watch?v=jvMkt9fkHCI Kind regards Tags: HP Desktops I accidentally deleted the directory "C:\Program Files (x 86) \Microsoft ' my 64 bit Windows Vista system. How can I get it back? You can try this program: http://www.filehippo.com/download_recuva/ Use the deep Scan option. It may take some time. The System File Checker can repair some of the files in there, but probably not all. It's probably at least some of the files that have been overwritten. so I would say the the more safe thing to do is to reinstall Windows. the color went from Windows Vista how I get it back the color went from Windows Vista, but if I'm going to monitor the settings it shows color is available. How to vista windows, rather than black and white the color back? Hello 1. don't you make changes on the computer before the issue started? Perform a system restore to restore the computer to an earlier point in time before the problem started. See these articles for help: Original title: Windows 8 is compatible with Vista? I need to download Notepad, all I can find are 8 versions Windows, are they compatible with my Windows Vista system? You can open the file hosts using Microsoft Word. but just check if you have Microsoft wordpad or Notepad? You can open it with Notepad too. my computer is Windows vista and installed microsoft Office Professional 2010 academic my computer is Windows vista and installed microsoft Office Professional 2010 academic. However when I open the program it gives me an error message such as: the application failed to start because its side-by-side configuration is incorrect... Check the log of events applications for more details. Hello 1. not the problem only occurs when opening Microsoft Office or with all applications? 2. I suggest you to install Microsoft Visual C++ 2008 and check if it helps. Step 1: Install the Microsoft Visual C++ 2008. Follow the link to download and install the Microsoft Visual C++ 2008. http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=29 (for 32-bit) http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=15336 (for 64 bit) Step 2: Perform a clean boot Follow the steps in the link below to perform the clean boot. http://support.Microsoft.com/kb/929135 Note: once you are done with the boot, follow step 7 in the link to your computer in normal mode. It will be useful. I bought a laptop (compaq F30 us in the United States) and windows original vista came with the compaq laptop (bought in US). Now, I want to buy a desktop computer and sell the laptop without windows vista software. Is there a way I can install windows vista in my new office. I don't have the cd or the software with me key since they have not provided for me at the time of purchase Hello No there is no way, how the do, because the license of Windows Vista is part of the computer compaq laptop - this is the license OEM - and cannot be separated. (in case the laptop is broken and cannot be repaired, then the license expiresand cannot be used on another computer) LC Need help, playback of Mp4 files on my Windows Vista system... Could someone help me find how to view Mp4 files on my windows vista system. I downloaded files that are the mp4 file and whenever I open them with my Windows Media program, it gives me an error message. Help! Try to install this http://www.free-codecs.com/ffdshow_download.htm If this post answers your question, click mark as answer . Windows Vista automatically "optimized" my office. Windows Vista tried to optimize my desktop and Solution Explorer. They are now so cuddly, the deesktop looks like a little kids coloring pages with each giant reflection of size. I can't read my eamils because of the low screen resolution and I am not able to find a way to return to the way it was. Restore point: http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/ Do Safe Mode system restore, if it is impossible to do in Normal Mode. Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER. Try a restore of the system once, to choose a Restore Point prior to your problem... Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them. http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution Change the screen resolution Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges. See you soon. Mick Murphy - Microsoft partner Have a 64-bit windows vista system. My computer guard shut down while I play bejeweled blitz. Tried to update windows and I keep getting error codes: 80070643, 8007371 B, 80070005. My Control Panel may be wrong. Hello Thank you for using the Microsoft Windows Vista Forums. I will need some additional information to help you best. O if it works well before? O since when are you facing this issue? Method 1: To perform the clean boot procedure, follow the instructions in the link below. Step 1: Perform a clean boot Step 2: Enable half the services Step 3: Determine whether the problem returns Step 4: Enable half of the startup items Step 6: Resolve the problem Step 7: Reset the computer to start as usual How to troubleshoot a problem by performing a clean boot in Windows Vista http://support.Microsoft.com/kb/929135 After checking the problem, turn the computer back to the Normal mode. Uninstall or update the program that is causing the problem. Check whether the problem is resolved. Method 2: Analysis of auditor of file system (CFS) that might help you resolve the issue. To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions. To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions. To run the System File Checker tool, follow these steps: 1. Click Start and type cmd in the box start the search. 2. right click on cmd in the list programs and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue 3. at the command prompt, the following line, and then press ENTER: sfc/scannow When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool. Follow the instructions in the link below for more information on scan SFC. http://support.Microsoft.com/kb/936212/ Check whether the problem is resolved. Please post back and let us know if it helped to solve your problem. Kind regards KarthiK TP does not start the last bars of microsoft, PAGE_FAULT_IN_NONPAGED_AREA windows vista system Please help send the laptop to repair costs more than the laptop... can I now an expensive paperweight? I remember well, here are the details: -bsod STOP: 0 x 00000050 (0xE967206E, 0 x 0, 00000002 00000000, 0X836A8510) -tried to restart, all options on F8 does not. -No installation disc available as it was only an upgrade to vista (tried the upgrade disc, didn't work) -recovery disk proven system of point of sale without success. -every time we it reboot go to the black screen with the bar where the green bars run on the side but always goes back to bsod. -System is an ACER EX4630-4126 -BSOD popped up all while surfing internet -is the new software installed spybot s & d -can not run memtest because it does not start up vista -tried running the memory diagnostic tool but it shut down on me before completing the diagnosis Any help would be greatly appreciated. I'm not much of a person of the laymens terms computer wouldn't greatly appreciated. Thank you. Ainjel Hello, This occurs generally early in the boot process. For example, the problem may occur shortly after the splash screen appears, and you will see a black screen with a moving progress bar. Specifically, this problem occurs generally when the system tries to load the i8042prt.sys driver. The problem only occurs in certain hardware configurations. You need the installation disk so that you can try to perform a system restore which is the WinRE recovery environment and then once you are able to start, you can try to install the fix below: Error message when you start a Windows Vista-based computer: "STOP: 0 x 00000050 PAGE_FAULT_IN_NONPAGED_AREA". http://support.Microsoft.com/kb/939720 Do a restore from WinRE system: Kind regards Savan Microsoft technical support. Windows Vista starts with empty office and the mouse cursor, then restarts I have trouble getting Vista to start on an Acer laptop. The laptop is an Acer Aspire 6920 G with Windows Vista Home Premium 32 - bit on it. The PC will start in an empty office with stop mouse cursor on this screen for about a 1 min and then it restarts and you go through the same process again. I tried the safe mode and last good configuration to know but get the same results. I have also tried to run the Startup Repair tool and get the same screen. I can launch Startup Repair to boot from a DVD of Vista Home Premium 32-bit and I can run but it makes no different. When you restart, you get the same problem. Does anyone have an idea? No it isn't the trunk upwards with the black screen and the mouse. Hi KevinBricknall, 1. have you made a recent software or hardware changes to the system? Since you are unable to run start up repair boot from the Vista disc, you can try to perform a system restore start from the disc and see if it helps. For more information, you can consult the following article: What are the system recovery options in Windows Vista? Hope this information is useful. HDMI going offshore and on the Windows Vista system when it is connected to the TV. Original title device: Windows vista HDMI Eh_bien, I have connected to the computer with a HDMI, (TV with HDMI output) device) the system is windows vista, but always goes off and turn it back on, it turns off the HDMI device and allows the device installed on the pc. As always, I can do to stay enabled HDMI device?, the HDMI device is always connected. I appreciate your help. Hello Method 1: Perform a clean boot. Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program. See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7: How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 http://support.Microsoft.com/kb/929135 Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article. Method 2: If this does not work then you can try updating the graphics card driver by visiting the manufacturer's website See also: Method 3: Please check the same in another port and also try it on a different TV with working port known. For more information, you can also see: HDTV: Frequently asked questions http://Windows.Microsoft.com/en-us/Windows-Vista/HDTV-frequently-asked-questions TV on your computer: understanding signals TV and TV tuners Please answer back so that I can help you WIndows Vista system restore or/relocation question Currently, I'm working on my uncles computer. Its operating system is a 32-bit version of Windows Vista Home Premium. He would like a system restore to this topic, but there is no restore point when I tried. Is there a way to do it or just do a reinstall without the disc because it was preinstalled when he bought and delivered with no disc. Hello Here's how to use the system restore: http://www.windowsvistauserguide.com/system_restore.htm ________________________________________________________ Here are the different ways to reinstall Vista Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it they do it for a nominal cost of $ ____________________________________________________________ also ask them if you have a recovery partition on your hard drive to get back to the way you bought it (which you should have like you do not have a disc) you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer Ask them of the exact key sequence __________________________________________________________ or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer they contain all versions of vista This is the product key that determines which version of vista is installed http://www.theeldergeek.com/Vista/vista_clean_installation.html ____________________________________________________________ How to replace Microsoft software or hardware, order service packs and replace product manuals I bought a Dell Latitude D830 since April 1, 2011 who came as advertised, Windows Vista and Microsoft Office Small Business 2007, I have two installed product keys and I have also reinstalled the programs from scratch and registered programs installed under my name, since I bought the computer on ebay with both promas installed as advertised. Please let me know what I need to do or what I've done is correct. I would verify that the product key that came with the computer are legitimate keys and not counterfeit. http://Windows.Microsoft.com/en-us/Windows/genuine If you post your Microsoft software, then you have no problem. You should check the other software as well as the Microsoft operating system and other programs. Thank you Marilyn We tried to upgrade our 32-bit windows vista system to Windows 7 32 bit Separated from this thread. We tried to upgrade our system to 32-bit windows vista to windows 7 32 bit and find no right answer to what we have to do to upgrade to windows vista 32. So far, our experience is our head is ROTATING and can someone help us? First of all, make sure that your PC meets the requirements of Windows 7 - system Windows help You can buy Windows 7 from one of the major retailers who still like mainline, new egg, or Tiger Direct - Amazon but none is smaller that that if you want to be sure to get the real and not renovated or eBay! If in doubt ask here before you buy, read the comments of the sales page for the experience of others. Once you have the disc, put it in the drive to make an update install with Windows 7 . If you have a Vista factory install I would firstly follow these same steps to Clean Up Factory Bloatware that will optimize for a better upgrade. If this facility is not satisfactory, then do the vastly superior clean reinstall Windows 7 Where is the HDMI output on Alpha 6300 Apparently, there is a HDMI video output on thr Alpha 6300 camera, but for the life of me, I can't find and the user manual or online help seem to refer to it. Am I wrong in thinking that it is an option? WMP... has stopped playing the files. recently, I restored my computer to factory settings. Today, that he would not play some of my podcasts. Then, an open window, the media usage rights acquisition. as I have 9500 podcasts, 3 hours later, still ongoing... now, a number of files get a r I use USB to HDMI. TV, it is attached to works very well with the screen of the PC, but not with windows media center. Get the error message "the files needed to display video are not installed or do not work properly. "Restart Media center or comput user managed backup and deferred tax rollback segments Hi Forum,Greetings of the day,Here I have a question about segments of rollback backup and deferred users managed, I don't have much experience with the user managed backups taken by backup of BEGIN and END.1. how facilities oracle using the database How to Update vCenter 5.5 U1 U2 5.5 Hi guys,.Where can I find good documentation on how to upgrade vCenter 5.5 U1 to 5.5 U2?We have 2 sites in related modes, SRM installed but not setup yet, vCOPs and 6 view Horizon.Also, we have implemented certificates of domain for all of the sites/Similar Questions
2. What is the brand and model of your monitor?
3. What is the brand and model of your graphics card?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
Step 5: Determine whether the problem returns
http://Windows.Microsoft.com/en-us/Windows/genuine/what-to-look-forMaybe you are looking for