Windows Vista the screen flicker

Similar Questions

• HP M9000: Black screen after the "Starting Windows" logo and the windows on the screen

  I just gave me a m9040n HP Pavilion Elite with a Q6600 CPU, graphics card ge force and two 500 GB HARD drives in.

  When I starts it up it seems to be ok the HP blue screen will lights up at the start of the BONE and displays "starting Windows" on the screen with the windows logo. and then it goes to black with just the cursor on the screen. (Vista) So I know WHAT BIOS is ok, the graphics are windows allowed from.

  I went to the HP system F11 recovery and he seems to think that all is well... Very confused ideas?

  Thank you, Glenn...

  400workstation

  It looks like one or more of the boot loader files has been corrupted.

  You need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.
  
  You will need to create something called a CD-ROM of repair of Win7. This will repair the boot loader files, and if that is the problem, your PC will start OK after that.  Yes, it's for Win7, but Vista uses the same bootstrapper, so you can use Win7 to repair the Vista bootloader files.
  
  The file you need can be obtained (with supplement) from this link: http://neosmart.net/blog/2009/windows-7-system-repair-discs/
  
  When you download this file, it will be an ISO file.
  
  To make a CD bootable it, you will need to download and install ImgBurn: http://www.imgburn.com/
  
  Once you have installed, run, select the option "Save image to disk file" and select the downloaded ISO file and that it points to a blank CD.
  
  To make a USB bootable of it, you will need to download and install RUFUS: https://rufus.akeo.ie/
  
  Once you have that, it is executed in the input of the unit, use the drop down menu to select the USB stick.  Near the bottom right, where is written 'Create a bootdisk to aid', select the ISO file downloaded.
  -------------------------------------
  
  Boot from the media that you have created and follow the instructions in this link: http://www.sevenforums.com/tutorials/681-startup-repair.html
  
  You will probably need to run Startup Repair three times for him to fix all the boot loader.
  
  Once completed, your PC should start OK.

  If it isn't, then some files of the operating system has also been corrupted and the only way to fix it would be to perform a system recovery - which if F11 does not work, but a recovery from the PC to its original using recovery media state.

  Problem there is that HP no longer wears a recovery media for the Vista PC, so you should check to see if these sites still have it: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• I'm on windows vista, the review said that I have a file that uses disk space

  I 'm on windows vista the healthcheck says I have a file using disk space, the file name is windows.old, if I just delete this, then it will hurt my laptop, I looked at the file and there are thousands of articles, my laptop is slow, what I'm doing. My system is 32 bit. Will someone please advise me in laymans terms I'm not exactly a pro with laptops.

  
  

  The Windows.old subfolder contains all of the files from a previous installation of Windows. If you copied all your personal data of the user subfolder of windows.old. Then, it is safe to delete.
  And, since it is the Windows Update forum, which focuses on the update of the issues, this question must be validated in a more appropriate forum. Such as the
  Maintenance forum and performance of Vista.

  If you don't know exactly where to post a question, start here - Vista Assistant forum

  MowGreen Services update - consumer safety

• Can not start, after the logo window shows the screen empties.

  I tried safe mode. When pilots take care it stops a...\system32\drivers\mup.sys crashes then.

  Original title: after the logo window shows the screen turns off. I deleted the drivers and now I don't know how to reinstall if I can't see the windows or office. __

  Hi Hermmm,

  • Who were the drivers that you have deleted from your computer?
  • You have the Windows XP installation disk?

  Step 1

  You can try to boot the computer to the last good known Configuration and check if it helps to start the desktop. To boot to the desktop in Dungeon known, pressing F8 during restart last good Configuration. Once you see the startup option in the last good known Configuration and press ENTER. Check if you can access the desktop.

  You can also try to disconnect all external devices except the keyboard, mouse and monitor and check if you can boot to the desktop.

  Step 2

  If the steps above do not help, you can boot to the recovery console and try to disable the service or the device to the computer and check if it helps you to solve the problem. The links below for more information on how to boot to the recovery console and disable the service and the device in the access recovery console.

  How to install and use the Recovery Console in Windows XP
  http://support.Microsoft.com/kb/307654

  How to disable a Service or device that prevents Windows from starting
  http://support.Microsoft.com/kb/310602

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• need help to move a rear window on the screen

  rather than reduce a window I was drag to the side of my desktop and accidentally moved completely out of sight. now when I click on the button in the task bar the only options I have are to close the window or move it. When I click on 'move' I get the four-headed arrows near the place, I moved the window off the screen. Can someone tell me please how do I move the window on the screen? Thank you very much.

  Right-click on the tab of the window in the task bar and select move. Now, use the arrow keys to get to the screen. Close all other windows except this one and use the cursor to drag the message to the desired size. File | Output and Windows will remember the size and location when you open it again.

• Windows vista the task image is corrupt or has been tampered with (0 x 80041321) Please try again.

  Windows vista the task image is corrupt or has been tampered with (0 x 80041321) Please try again.

  This happened after Windows update

  and no solutions yet!

  Dear Marilyn

  nothing worked, finally I deleted KB2305420

  now everything is OK

  Anyway thanks for your help

  SINA

• DisplayPort that NO SIGNAL appears in the window on the screen is good

  DisplayPort that NO SIGNAL appears in the window on the screen is good. I run all programs without any problems. But this small window in the upper right corner will not go away. Any help will be appreciated.

  Hello

  To make the small window is closed on your screen, please try to perform an end task. If does not end the task, there is an option that attempts to put an end to the tree of the whole process instead of just the individual job. Select the Details tab in the Task Manager, right-click the process you want to end, and then click end process tree. This will attempt to leave the program and all associated process.

  If the same small window is always on the screen, I suggest that you try to unplug your monitor from outlet for a minute and plug it back again. This should refresh the settings of your monitor and the small window should disappear.

  Let us know how it goes.

• Why all my open windows minimize when I move another window on the screen?

  Hello

  What happens is that when I move a window on the screen all my other windows minimize, as this half the window sometimes disappears or appears another window on top.

  I am currently running Windows 7, it is aware of the updates. I ran virus checks. Also, I found a way to stop it from happening by unchecking the "use Visual styles on windows and buttons" in the performance options, however my PC should run with this setting is enabled, and it has been for more than a year.

  If it helps, here are the basis for my PC specifications:

  i5 - 2500 k

  8 GB RAM

  1 TB SSHD (this is where the BONE is)

  HARD DRIVE 500 GB

  160 GB HDDGTX 770

  OCZ ZS 650W 80 + Bronze

  All the drivers are up to date.

  Any help is appreciated

  Thanks in advance,

  Alex

  I don't know why I didn't try this earlier but I changed the theme to one of those aero preset instead of one custom I made, has so far prevented the problems I had with the windows tearing and glitching. Im not sure what caused my custom aero theme to cause a lot of problems.

  Thanks for all your help!

• Captivate 7 - Variables window off the screen

  When you open the variable window, the window off the screen and I can't bring it back to one of my two monitors (double).  ESC comes to Captivate, but I can't seem to locate and drag the window to the return variables.  Any suggestions?

  I can't reconnect to a third-party monitor (which I used to have).

  I assume that you have already tried resetting the workspace, CP restarted and the system?

  Try to update preferences, using the Cleanpreferences file that corresponds to your operating system, and that you will find in the Utils to the CP installation folder subfolder. ATTENTION: you will lose any customization.

  Captivate 8.0.1 Install? Keep your customization! -Captivate Blog

• How to open photoshop with tools window around the screen?

  How to open photoshop with tools window around the screen?

  Try this:

  

  I hope this helps!

  Julia

• Is it possible to display a dialog box with the fields/custom controls for the Windows Vista login screen to the top.

  Hello

  In Windows XP (prior to Windows Vista), a Service could be interactive and display a window/dialog on the login screen.

  Of course services are no longer allowed to be interactive, and certainly, I agree that it is an improvement in security.

  However, say if I wanted to do one of the following values, which is possible (and how to implement). I don't mind what language I have to set in.

  (1) add a button in the login screen that says "Reset Password" which will then invite a form with questions of security.

  (2) run an application within the login window

  Really appreciate any help on this matter,

  Mark

  Hi Mark,

  The question you posted would be better suited in the MSDN Forums; We recommend that you post your question in the MSDN Forums to get help:

  http://social.msdn.Microsoft.com/forums/en-us/categories

  See the following for more information Microsoft article.

  http://blogs.msdn.com/b/securitytools/archive/2009/07/30/how-to-build-custom-logon-UI-s-in-Windows-Vista.aspx

  http://blogs.technet.com/b/Aho/archive/2009/11/15/custom-credential-provider-for-password-reset.aspx

  Keep us updated on the status of the issue.

• The substitution of password on the windows Vista Welcome screen

  has windows vista installed on laptop, now I just can't past the logon page - keeps asking for a password under my daughters name and she doesn't know what she put, the screen does not even to change username - what can I do

  Hello

  Thanks for joining us on the Microsoft Community Forum.

  According to the description provided, looks like you are unable to connect to the system because the user password protection.

  It would be awesome if you could answers to these questions in order to help you further.

  1. have you made changes on the computer before this problem?

  2. you have another administrator account on your computer?

  3. what happens when you try to connect, you get any error message or error code?

  I suggest you to consult the following Microsoft article on the Microsoft Policy we lost or forgotten the password: http://support.microsoft.com/kb/189126

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you

• How can I change the text at the bottom of the Windows Vista login screen?

  Hello
  I want to change the text at the bottom of the login screen (where it says 'Windows Vista '). Can I do this? If so, how?

  Hello

  the text is stored as a bitmap inside the Basebrd.dll. Use tools like Anolis.Resourcer or ResHacker to replace the bitmap image.

  André "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• I need help for Windows Vista black screen during the connection, even with the login screen removed

  Hey, I have a problem in Windows Vista:

  I've been updating / updated my graphics card and it is the graphics card, I'm updating, after a while, a black screen will appear (PITCH BLACK) and I there is no cursor and I tried Ctrl + Alt + Delete, but nothing seems to work, after I turned off my laptop, starts to load then it was the new dark night! (NO LOGIN SCREEN). Then I turned off my laptop then I constantly pressed f8, then I pressed "Computer repair" then it loads then my screen showed "Another user", then I clicked it then I had to type my ID but I have no details of connection, I pressed on enter with no connection details, but this still does not work because I had to type in my login information. I tried everything, then I went to safe mode and fact a password and changed my admin account type, then I rebooted my laptop, then I have constantly pressed f8 and pressed "Computer repair" then it loads and then my screen showed 'Another user' again... .
  
  PLEASE I NEED HELP! I WANT TO PLAY MY GAMES!

  Hello

  Follow the steps below:

   

  Method 1: Do the Startup Repair to fix the problem.

  See the following article for more information on the Startup Repair:

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

   

  Method 2: Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  For instructions, see the following article:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Let us know if that helps.

• Windows Vista Welcome screen opens in the middle of two monitors

  I want to program WinVista then logon Welcome screen opens in the middle of the screen #1 instead when Vista starts it first, it assumes that the display is tense on both monitors so the Windows Welcome screen is literally in the middle between the two monitors (on the right side of the monitor to the left #1, left the #2 display right edge).  I would like to change when the Welcome screen? He

  Hello Boli.law,

  Thank you for using the Microsoft Windows Vista Forums.

  Sorry, you are having this problem!  However, in Windows Vista, there is no setting to change the boot logo in the registry. And with your dual monitor set up it stretches on both screens.  Thank you!

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.