Windows Vista won't load - black screen each laptop time starts

Similar Questions

• When I turn on Windows Vista, I get a black screen full of f zeros.

  Original title: zero screen

  When I turn on my system (Windows Vista) I get a black screen full of f zeros.

  Hi Lyndiatxaz,

  1. you receive the error codes?

  2 are you able to boot into normal mode after getting the black screen?

  3. have you made a recent software or hardware changes to the system?

  You can check with the following and see if it helps.

  Method 1:

  If you are unable to boot in normal mode, you can start your computer in last known good configuration.

  We can refer to the following article and try to use the last known good configuration and the control.

  Using the last good known Configuration

  Method 2:

  Step 1:

  Start your computer in safe mode and check if you can start.

  Step 2:

  If you are not faced with the question in safe mode, and then perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to complete the clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in the article above to configure Windows to use a Normal startup state.

  For more information, you can also view the article

  What to do if Windows does not start correctly

• Windows Vista does not boot, black screen after "windows loading files...". »

  I have a laptop HP Pavilion dv2000, it came with windows vista, so I don't have a boot disk. When I try to start it, it will say "windows loading files...". "with a bar, once the bar is loaded it will say microsoft Corp. (with the copyright symbol) and another bar with a bar made up of three small bars of loading through it, once that is done, it will show a black screen. I have installed recent updates and I can't access the restore mode or security system.

  Hello

  The possible fix is the same that you can not boot the system currently.

  You need to make a computer repair/restore on another disc, borrow a friends Windows disk.
  or buy one from the manufacturer of the system. See the methods in BOLD above which also shows how
  a repair/recovery disk which is bootable.

  It may not be repairable by a user and the help of a real store of the computer (no leeks and peaks at)
  a BestBuy or other BigBox stores) or Support from HP is required.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My Windows Vista computer displays a black screen with only a white arrow to the mouse cursor.

  I have a black screen with only a white arrow to the mouse cursor.  I tried to start in safe mode, safe mode with networking, and safe mode in the command prompt. Each time, I just get a black screen with a white arrow cursor.  How can I get my screen back?

  original title: black screen

  Hello

  Remember to make changes to the computer before the show?

  Try the following methods and check the status of the issue.

  Method 1:

  Disconnect an external device connected to the computer with the exception of the keyboard and mouse and check if it helps.

  Method 2:

  If you have the Windows Vista disc, the computer by using the startup disk and perform the Startup Repair. See the following links:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Make repairs to the system from the Windows recovery environment.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

  Method 3:

  If the method above does not solve the problem, then try to perform a restore of the system from the Windows Recovery Console. You can see the link provided in method 2.

• Windows Vista won't load on my computer

  My Windows Vista computer does not load upwards after I log in.  As soon as I connect you I get an error message: "Windows Explorer has stopped working" followed by "Restart Windows" and then it never restarts.  I soon begin to receive error message that State that the other programs that try to load do not have managed to do.  I tried to reboot in safe mode, but I also have the same problems in safe mode.  I try to run a restore msconfig.exe and system, but the error messages will be displayed until I can get the controls and prevents me from doing anything.  The problem began Tuesday night 03/08/10 after I installed a router on my modem for wireless internet for laptop of my wife.  The router is a D-link router.  I think I might have to reinstall Windows vista, or at least try to fix it, but I was not apparently received a Windows Vista disk with my computer when I bought it from Best Buy.  Very frustrating to be sure.  Any help would be greatly appreciated.  Thank you.

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• web pages of Windows vista won't load using multiple browsers.

  Windows Vista, 32-bit.
  Card mother with an AMD processor - built Gigabyte in 2009.

  Computer has worked for a few years, however, now, he can not complete the loading of most web pages.

  Using multiple browsers (IE, Firefox and Chrome), we see the same behavior - web pages do not just end.
  Sometimes update gets more of a page - but for videos (youtube and other sites) - it is almost impossible to load a full clip of more than 2 minutes.

  Ping/tracert works very well.
  If passing through the VPN + desktop remotely, things work very well (this confirms that he is not the access provider when you use remote desktop, we are no longer local + all device drivers which could be the problem).
  Windows Update, seems to work very well.

  Download files from a web page, does not work.

  The computer is currently connected via Ethernet (not wireless).
  We have tried this on two different networks, so it is not associated with ISP.

  We tried to connect a USB network adapter - thinking it was hardware related, but that has not changed anything.

  We have tried to start in safe mode with networking - and it still does not work (so probably not the program antivirus - mcafee).

  I was able to get a live LInux OS running on the pc, and he had no problem loading the pages/videos, ect - what is not strictly material.

  I tried using some of the Netsh command to reset tcp/ip stack - but they don't solve the problem.

  I do not think that it will fix a Vista startup repair, but I advise him to try to do.

  I'm looking for any other suggestions in addition to switch to Linux full time.

  Thank you!

  Hello

  Method 1:

  I suggest to perform a restore of the system and check if it helps.

  What is a system restore.

  Follow the link below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Method 2: Reset TCP/IP.

  Follow the link below and reset the winsock TCP/IP settings and check if that helps.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  http://support.Microsoft.com/kb/811259

  Let us know if it helps.

• Windows Vista won't load: 0x800701E7 error code

  I built this PC using a year from a friend. He put a valid XP pro OS on the computer. It worked fine until the beginning of this year when he died. I took it to my local PC repair shop and they replaced the motherboard you PSU and CPU. I tried since loading this back BONE with no luck.

  After returning the computer to the shop, they said they have fixed the bios...? In any case, I have since bought a key drive and windows vista product. My PC starts to install vista but gives with this error. It is vista ready as I have the correct specifications to have.
  Can you please help me in this case.
  Thank you

  Hello

  You can run the Windows Vista Upgrade Advisor to see if she sees some problems with the upgrade to Windows Vista.

  This error message indicates a problem with possible hardware driver.  Can you please send your hardware specifications for us?  In addition, installation when you get the error and the error message contains more information?  Please let us know so that we can help you with your problem.

  Thank you.

• Windows Vista won't load disc

  Windows Vista 64 bit frozen and would not.  After reading the book has decided that I should restore disk factory.  Press F12 by following the instructions (I did all the retore point Jules Destrooper, no go).  After hitting F12 it says press F1, set thinking it would reformat the disk drive.  Instead it loaded Vista and it works.  Now, whenever I start the computer it shows the line F1 and I have to insert the disc to load.  What happened.

  Hello

  ·         Which version of Windows Vista you are using?

  ·         What is the brand and model of the computer?

  Regarding the recovery DVDs that you get F1 option before you start, you can try to contact your OEM (manufacturer, i.e.) for assistance.

  I hope this helps.

• a yellow triangle with a critical problem message, windows vista does not load on a computer laptop dell studio

  Vista Windows failed to load on a dell studio laptop, the message appears with the critical error message, but then the screen turns white after auto restart, no loading of windows. What can I do

  http://support.Dell.com/support/eDOCS/systems/WS340/en/UG/DIAGS.htm

  Try the above balance sheet of Dell Diagnostics, using F12 to start this process.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can also follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• Windows Vista does not load all the black white backlit display.

  I'm repairing computer of my aunt. It's a laptop gateway M-6320. Windows Vista. It loads the bios and goes through the MAIL. After the POST, it just goes to a screen backlit black white with no mouse and nothing happens.

  Tried to change the boot order to boot from the cd first and put the disc of windows 7 in to run a repair (I don't have a vista cd), but it does not always load. everything sounds like it turns on and works fine. the dvd sounds like it runs for a few seconds. I also tried to boot from usb with windows 7 there. still won't load what it is. I took out the battery tested cmos it is 2, 5V. I think it was. still nothing. I left the computer for a whole night. still nothing. I changed the hard drive even though it sounds like it's working. still nothing. I even tried a windows xp cd in the freak chance, it was a bad cd. and nothing is connected to the computer while I'm trying to start. He's not going for advanced options or to try safe mode.

  I also tried to put the memtest on USB, but it will not load anything from him even with usb as the first boot option. and I tried different usb drives also.

  I can't figure what's wrong... my only thought is that the bios is corrupted or the RAM is bad. Anyone have any ideas? Oh and the bios is Phoenix

  Hello

  Since you've already tried all the troubleshooting steps, including booting from a Windows 7 disc to repair the Windows installation. If all else fails, then I think that
  It's a hardware problem. I suggest you contact the manufacturer of the laptop computer or take it to a tech store to get help.

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit ourMicrosoft answers Feedback Forum and tell us what you think.

• I lost my laptop screen after trying to set my display properties. I get the Dell logo and Microsoft Windows XP, then a blue black screen... but I can hear loader behind it. What gives?

  I lost my laptop screen after trying to set my display properties. I reformatted recently, everything seemed to work, I loaded SP2 who gave me the poor quality screen while trying to fix it. Now, I get the Dell logo and Microsoft Windows XP, then a blue black screen... but I can hear loader behind it.  What gives?

  "Ineedafix" wrote in message News: * e-mail address is removed from the privacy * .com...

  I lost my laptop screen after trying to set my display properties. I reformatted recently, everything seemed to work, I loaded SP2 who gave me the poor quality screen while trying to fix it. Now, I get the Dell logo and Microsoft Windows XP, then a blue black screen... but I can hear loader behind it.  What gives?

  Start the computer in safe mode (press F8 continuously immediately after power and don't worry beeps when you press the button) and let it boot without a network.  Once there right click on the desktop and then click Properties.  Click settings and the value of the monitor mode (640 X 480) VGA or SVGA (800 X 600).  Accept the changes and restart the computer.  You should have a mediocre screen, but you should see it now.  Download and install the appropriate drivers for your video card in the laptop to the web site of the manufacturer of the laptop.  Install the drivers and then you should be able to set the display of the laptop to the correct native resolution for your computer monitor (must be in the documentation of the laptop).

• Windows Vista won, t start

  By turning on the computer, Windows vista does not start. I turn off by holding down the power button. It when me runs through a device to repair that sometimes work does'nt. That happen to fear only twice a month, but not all the time. When it happens I lose my updates on my Norton security

  Hello

  Do you not see repair option before going through it or the (repair) process starts by itself?

  You get to advance boot menu options if your computer stopped unexpectedly on the previous session. Do you have any external device connected to your computer?

  Since it is a random question, I recommend you remove all external devices except the keyboard and mouse and check what is happening. Also, you can try to use his computer in start state in minimum mode for a period of time and check if you are experiencing the same.

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after starting the computer, reinstall and run the program and see if the problem is resolved.

  Check if you have the same problem... If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

  http://support.Microsoft.com/kb/331796

  To restore your computer to a Normal startup mode, follow these steps.

  1. click on start in the box start the search.

  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  3. click on the general tab.

  4. click on Normal Startup - load all device drivers and services and then click OK.

  5. When you are prompted, click on restart to restart the computer

  Let us know if this helps

  Concerning
  Anthony.

• When you try to watch tv in Windows Media Center, I get black screen and audio sometimes and sometimes does not.

  Black screen in Windows Media Center during the TV

  When you try to watch tv in Windows Media Center, I get black screen and audio sometimes and sometimes does not. Any fix for it?

  TV works on the other program I have and has been workign on MC last week, but now I don't?

  Some success with this issue (its OK, but BLACK) video for live/recorded TV

  ' 1) ' disabled ' tuner card (Ati HD 650 PCIe) TV [via right click] in the Device Manager
  (2) restart Win7 64-bit
  (3) Win7 located & reinstalled the drivers
  (4) VOILA!   Real video and audio live & recorded TV

  BTW - before above fix in Device Manager:
  Notice anything in his video & Game Controllers
  'Properties' reported 'this device is functioning.
  "Update drivers" reported "... software driver...»
  ... and no updates of WMC anywhere in sight

  Go figure!

• Windows Vista Basic has stopped working on my laptop.

  After my recent updates, Windows Vista Basic has stopped working on my laptop.

  After my recent updates, Windows Vista Basic has stopped working on my laptop.

  Hey shousell

  stoppped working covers a lot

  If you can not start, follow these steps

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  or transfer your question in forum windows update link below

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• Windows Vista Home Basic preinstalled on my Compaq laptop will not accept code provided with the computer installation.

  Windows Vista Home Basic preinstalled on my Compaq laptop will not accept code provided with the computer installation. HP can't help. Your say talking to HP and HP technicians say they are unable to help him. I'm now using valid XP. HP say that conflict with Vista. Can anyone help?

  original title: VISTA VS. XP

  Your technicians say talk to HP

  Sorry, this is not Microsoft.  This is a public forum from user to user hosted by Microsoft on its servers for the comfort of its clients, and we all here are volunteers.

  You say you use XP.  What is your question?  What do you mean 'conflicts with Vista?

  I suggest recovery discs you order from HP for your computer.  If HP is no longer the issue of stocks you can order such a third of Recovery - Disks.com.  There are several of these companies.  If you are going to use XP, you need to install XP from scratch and this means that you need XP drivers for your brand and model.  If HP has no XP drivers on your computer you must not try to use XP on it.

  Remember that Vista Starter, Home Basic, Home Premium and Ultimate out of Microsoft support on 10 April and there will be more updates, including critical security patches after that date.  Only Vista business and company will continue to receive updates.  You might consider this a good time to upgrade to Windows 7.  You must download and run the Windows Update Advisor once you restored Vista successfully.