Windows XP and Windows 7 connected by Ethernet; wirelss router o adapter to xp connected to windows 7 can only share internet

Similar Questions

• How to connenct laptop from Vista to Windows XP PC to share internet?

  My wife recently bought a new laptop Toshiba A100 with Vista installed.

  My PC, connected to AOL Broadband uses XP as an operating system. I'm trying to set up a wireless link. AOL, said that XP and Vista are not compatible, and to put in place a link I have to buy and to install Vista on my PC or install XP on the laptop.

  Is this correct? I don't want to install Vista on my PC as it is quite old and probably doesn't have the ability to run Vista - someone has any suggestions how I can solve this problem without changing the operating system?

  If I need to change the operating system, I prefer to put XP on the laptop.
  Y at - there a site where I can download this free of charge now that it has been superceeded.

  OMG. You must not give a s * t on what they say. Of course, it is possible to set up a network or a direct link between XP and Vista. I even made myself... Do not worry!

• My WiFi wireless stop working, it can only direct internet access to connect to the router.

  I have a Toshiba Satellite P205D-S7436 and cannot use the satellite (Atheros). The switch is on but no light to show that it works.

  Hi Stevenwilson,
   
  S ' it works well without any problem?
   
  -Remember to make changes to your computer after that this problem started to happen?
   
  Try to download and install the latest drivers for the wireless network adapter and check if it helps:
   
  Here is the link to download the drivers:
   
  Toshiba support
   
  If this does not help, contact Forums of Support from Toshiba for assistance on this issue you mentioned that the adapter does not seem to turn on.

• I can't restore my Firefox window: I can only enlarge or Minimi

  After clicking the button right arrow on the title bar of tab groups, twice, cannot open maximized FF window. Cannot restore partial screen.

  OK, fixed. Basic Windows stuff. Right-click on the taskbar, select Cascade Windows, and off-screen window returns. Then you can manipulate the window in usual way.
  Thanks to these people to remember.

• When you use Outlook Express from home I can send and receive emails, but when I'm away from my connection at home I can only receive emails.

  Problems using Outlook Express offline at home

  I get an error message when I try to send e-mails, would it be possible to send and receive e-mails via Outlook Express from another connection. I hope someone can help, thank you.

  Jack

  Always display the complete text and correct all errors when you ask about a problem.

  ISPS don't like people using their networks to forward mail from other networks.  The symptoms you describe are usually the result of not properly is authenticating with the outgoing server or the use of a non encrypted SMTP connection (that is, port 25 instead of 587 or 465 or whatever your email port provider requires for encryption).

• Can only share or see the shares of network using Ethernet

  On my new X 1 carbon, I can't do that CIFS share via Ethernet. If I connect via WiFi, sharing stops.

  Ethernet and WiFi are identified as private networks, so I think that they have the same settings. How can I get Windows sharing in order to work on WiFi?

  I fixed that. This is bitdefender. I had to put reliable wifi network

• After cleaning a virus, my office which was previously... now can only Wired internet wifi connection

  I can see "wireless network connection", but it says not connected. I tried to disable and enable, connect etc, but he says always "not connected". I also tried 'wireless start-up' or search for wireless services and it says "no wireless networks detected on this computer"... under network and sharing in the left side panel Center, it DOES NOT list (?) wireless network connections This computer has been wireless for years... but I'm puzzeled on the way to get wireless again... System Restore is also used, nothing helps.

  Using the system restore only will put you back in the area of viruses, which you say that you had deleted.

  Go to the website of the manufacturer of your laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Or go to the website of the card/USB wireless adapter (as you say you have a computer) > download the drivers for your hardware wireless

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And make sure that the Virus is completely removed by also scanning with Malwarebytes:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  How to use Malwarebytes after installation:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  See you soon.

  Mick Murphy - Microsoft partner

• Just upgraded to El Capitan and cannot access the calendar. It opens with a "Shift schedules to the server" message Can only Force Quit

  Just upgraded to El Capitan and cannot access the calendar. It opens with a message 'Moving calendars to the server.

  I cannot access all features and can be closed only by using force quit.

  Please stop calendar and also the application of reminders, runs. Force quit if necessary.

  Back up all data.

  If you synchronize some of your calendars, or reminders with iCloud, then in the iCloud preferences window, uncheck that marked calendars and reminders. You will be prompted to confirm that you want to remove your iCloud calendars and reminders of the computer. They will always be in iCloud. Re-check the boxes.

  If you synchronize agendas or reminders with another network such as Google service, please open the preferences panel Internet accounts. Make a note of the settings for calendar accounts, then delete and recreate.

  Launch schedule and see if there is an improvement.

• networking with a Sprint aircard card - how can I share internet connection from my card Sprint air with other computers?

  I use a Sprint air card for my internet connection.  How can I make my connection mobile connect with my connection to the LAN ethernet so that all computers can go online.  There are two (mobile and local) connections in network and sharing Center.

  Enable Internet connection sharing on the mobile connection:

  1 right click on the connection.
  2. click on Properties .
  3. click on sharing .
  4. put a check mark in the Internet connection sharing check box.

  Then connect all computers to a network switch or router Ethernet connections.  If connect you to a router, disable the DHCP server in the router's built-in.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• I downloaded creative cloud on my mac since the access of our school (SCAD).  I got a new computer (pc) and need to download it on the new computer.  When I try it says I can only put it on a single computer.  What should I do?

  Can someone help me?

  The cloud GENERAL license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations may NOT be used at the same time (noted in the link above of the license)

  Since you seem to have a special version through your school, I THINK that you need to disable it on old before installing the new

  Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 can help

  -also read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

  -or https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

  New account even computer https://forums.adobe.com/thread/1465499

• Very weird client connection problem: customer TAF can only access in standby mode

  I have created service and trigger on the principal database and the service started.
  
  However if I test it on my workstation, I can not open into the fermenter at all with the ora-12514 error.
  
  However, if I do a failover to the standby database, at this time there Eve becomes primary, I am able to connect to this service.
  
  Or I tried to start the service on the database pending while the watch is in sleep mode, I can't connect to the service_name even relaxation for the primary database connection.
  
  How to diagnose this problem?
  
  Help, please. Enjoy your time.

  Hello;

  I would check the client side first. I think you probably have a problem minor tnsnames.

  If the listener is not running, you can't get a TNS-12514 - means that you get a listener is running, but it's good?

  Troubleshooting - ORA-12514

  1. Enter the command-line command "lsnrctl status".

  2. check the host for which the listener is listening if it is not correct, the difficulty of the LISTENER. ORA

  3. check (on this host) port on which the listener is listening if it is not correct, the difficulty of the LISTENER. ORA

  4. check if the listener knows of this service

  Client side in the TNSNAMES file. ORA

  1 make sure that the points of entry to the correct host ADDRESS (verification of strike fault).

  2. check the ADDRESS of the entry points to the right port (PORT = 1521) (this would cause this error)

  3. check the ADDRESS of the entry points to a known service (once again a small typo will really hurt)

  If it still does not work, check the SQLNET. ORA make sure that domaine_par_defaut is not incorrect (it is a long shot)

  I guess your trigger start service, begins in the affirmative and lsnrctl shows, to Client-side. Sleep works if the triggers will fire OK it. Recheck the service name vs say what tnsnames. Try to manually start the service outside the trigger and if it still doesn't work its probably isn't the trigger.

  Any chance one of the entries is missing in the tnsnames file? Or has a hidden piece of white space around it for the primary is broken but the work of sleep?

  I would check "The tnsnames.ora used by the customers of the Application" here:

  http://uhesse.WordPress.com/2010/11/05/real-time-query-for-read-mostly-applications/

  Best regards

  mseberg

  Published by: mseberg on December 17, 2011 09:02

• connected as long as User1 I can only access the srv record (Explorer) - execute / run as he is denied (the path not found or insufficient rights)

  Original title: denied enforcement program

  Configuration:
  -Win server 2003 standard (in the Working Group)
  -Portable Acer Aspire 5100, Windowx XP Home Edition sp3

  Problem:
  On laptop, there are 3 users: administrator (administrators), (power user) User1 and User2 (user).
  Logged on as administrator or User2 I can access the server disk, run the executable SRV drive etc, but connected as
  User1, I can only access the srv record (Explorer) - execute / run as it is denied (the path not found or)
  insufficient rights). The same phenomenon occurs even if User1 receives administrator rights.
  On the server side there is no restriction or limitation to User1 (because it's in the group, where
  any member of this group (also User2) has no problem). Logging as User1 on others
  PC there is no problem.
  Grateful for any suggestions / help.
  Marjan

  Hello

  Try to take possession of the file or program and check.

• Can only connect to the home page after the host switch

  We went from a customer site hosting companies.
  We have implemented a new Contribute connection key, but we can only change the home page. Other pages we sail to display this message:
  You are viewing a page on a Web site that you have not created a connection to.
  
  Double checked the permissions and records, that the key is allowed access too and it's all good.
  I must be missing something. Is it possible all the LCK files are corrupt?

  Hope this helps somehow.

  He did it!
  You have helped narrow down what needed to be done and focus on the folder that holds the keys.

  Something went wrong when I tried to "Administration the SIte" in Dreamweaver in Contribute. The same error kept produced (even after I updated the IP address).

  I found myself:
  1: remove the _mm folder
  2: setting up a connection through Contribute (not using Dreamweaver / manually enter the FTP information)
  3: login to the site and check that I could change all the pages. (Hooray for that!)
  4: returned and got into place as an administrator through Contribute.

  Thank you from me by browsing. Much appreciated!

• upgrade to windows 10 and unable to connect to the Netgear router

  After the upgrade to Windows 10, I get a connection limited to the router.  I have tried everything that seems to indicate that I have seen but not solution.  I went back to 8.1 and everything is ok.  Drivers are all to date I can say.  The problem seems to be related to the default gateway or the lack of it.  It is not good to reset the router.  My labtop HP running windows 8.1 works fine but my Dell Inspiron gets only limited access to the router. I need help to solve the end.

  keybaud

  I do not have a Dell, but I'm having a similar problem with the Netgear WNDR4500 v1 router and an ethernet Intel I217-V adapter. 10 Windows does not recognize the router is via the Ethernet connection, but it does not work with a wifi dongle.

  This is to help, adding that I don't expect Dell to solve my problem. :-)

  Hello

  Not sure what help I can give since I know not what system you have, and if it is considered compatible Win10, but here is the link to the driver Windows 10 ethernet Intel 1217 - V cards.  ((NOTE: le lien que je fournis est pour la version 64 bits de Windows 10.))  If you have installed the 32-bit version and then to just change the drop-down list of BONE near the top of this page))

  I would also say that updating the firmware on this router would be your next step.  See if one or both of the Exchange help people.

  If this isn't the case, then remove all your system's ethernet drivers, reboot and see if Windows 10 has all the innate drivers that may work.  Or else let Windows Update search and download a driver.  Who has the strongest chance of finding a compatible driver.

  I hope this helps.

  Todd

• Ethernet cable to connect my windows laptop 7 to the internet. connection is very bad. It works but only for 30 minutes max.

  My internet does not work correctly. I use an ethernet cable to connect my laptop (using windows 7) to the internet. However the connection is very bad. Sometimes it works but only for 30 minutes max, and other times it does not at all, connect saying that the cable is disconnected. I tried 3 different cables to 2 different ports, then maybe the problem comes from my laptop. It connects to the wifi networks fine but not with the cable. Does anyone have any suggestions as to what could be the problem and how can I solve this problem?

  Hello

  1 did you changes to the computer?

  2 did you receive an error message?

  Method 1:

  I suggest to check and make sure that all cables are connected correctly.

  Method 2:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet