Windows XP must be activated by connecting to the laptop
I have a problem with my laptop when I try to log on I put my password, then a message appears and says. This copy of windows must be activated with microsoft you can connect. You want to activate windows now? Yes or no. I click on Yes, then a window appears and says Windows is already activated. Click ok to exit > I click ok and I takes me back to the log in sreen all over again. Please help I need my computer for work
Hi prettypp195,
· Do you remember all the recent changes on the computer before the show?
· What is the service pack installed?
· What is the number and the model of the computer?
Try the steps listed in the link below and check off the results: you are prompted to activate Windows XP or Windows Server 2003, each time that you start the computer: http://support.microsoft.com/kb/312295
Tags: Windows
Similar Questions
-
must my computer be connected to the internet for the development of work?
must my computer be connected to the internet for the development of work?
Hello
Yes, because it updates your machine:
Updates that help protect against performance problems future system by updating the PC with the Windows then in force, the BIOS firmware and software updates for security
Source: http://www.hp.com/sbso/services/pc-tune-up-pro-datasheet.pdf
Kind regards.
-
Hello
I have recently setup a wireless connection from my laptop on Windows 7 works very well. but I have a laptop with windows xp that show an icon connected to the internet, but I can't access the internet can you please help me.Thank youoriginal title: wireless internetDo you receive kb from the internet source or is it local only, and when trying to access the page host does upward with the site not found or 404 error, have you tried to repair the connection, it could be your antivirus protection is blocking the signal.
-
After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,
but unable to connect to the internet using the standard account. I have the latest version of the Solution Explorer.
How to fix this?
Glad to hear it.
If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem. -
Identification of customer's Windows 7 NFS UID GID information
I am trying to connect to the Windows 7 Client NFS on a server running on a computer (VxWorks) NFS. I am able to properly connect Client NFS software by a 3rd party on the NFS server. However, when I use the Client for NFS provided by Windows 7, I am unable to connect. The \\ip address\share Z: mount"command fails with the error code"the path not found network ". I can't do a ping of the computer running the NFS server.
The NFS Client operating system: Windows 7 Ultimate, 64-bit
Data captured by Wireshark
MOUNT V1 EXPORT call 3rd party client
Identification information Flavor: AUTH_UNIX (1)
Length: 32
Stamp: 0xc7065970Machine name: PC
UID: 1000
GID: 1000MOUNT V1 EXPORT appeal of the NFS client
Identification information Flavor: AUTH_NULL (0)
Length: 0It seems that the credentials of NFS Client are not correct. How can I change the flavor of AUTH_UNIX and the UID and GID to 1000?
Hello VDAEMP,
As Eddie and Sudarshan has said, the Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
TechNet - Windows Server
Thank you -
can not connect to the computer
* original title - I can't connect on the laptop when I put in password says the USER PROFILE SERVICE FAILED THE LAGOON AND DO CAN NOT BE LOADED a *.
Hi vincentbyrne
What operating system is installed on the computer?You can refer to the link below and use the provided steps to identify the installed operating system.
If you are using Windows Vista or Windows 7 based computer you can see Microsoft article provided below and check if the measures help -.http://support.Microsoft.com/kb/947215
I hope this helps.
-
Resolution is lower when the monitor is connected to the laptop
Recently, I knew that my laptop of girlfriends who is a Dell XPS streched to the office and the max resolution is 1280 x 1024, what happened during the night. The resolution used to go up to 1680 x 1050.
The stretching occurs only when its acer monitor is connected to the laptop. When disconnect us the laptop resolution is up to 1900 x 1200 (finally something like that).
Operating system is windows 7 x 64. I have the exact same monitor works fine on a windows Vista on a Dell XPS.
Anyone know what to do about it?
Best regards Sune
Well, I have the same problem with my lcd... and I discovered that this is due to the ability of the tv... or the screen, your laptop have a high native resolution but perhaps the native resolution of your screen is less than I say 1360 x 768... by that your pc or laptop detects the monitor and adapt to... but this will give you a No 4 k true HD display.
-
My connection to the laptop for Sharp AQUOS HDTV stop work-"not compatible with this signal.
My connection to the laptop for Sharp AQUOS HDTV stop work-"not compatible with this signal.
Hello Bonnie,.
I would like to know some information about the problem so that we can help you better.
What is the brand and model of your laptop?
Thank you for details on the issue.
I also know that the inconvenience that you are experiencing due to connection HDTV problem. I will definitely help you.
This problem may occur because of corrupted device drivers or incorrect device settings.
I would suggest trying the following methods and check if it helps.
Method 1:
Run the hardware and devices Troubleshooter and check.
Reference:
Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-TroubleshooterIt checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
If this does not help, use method 2.
Method 2:
Please refer to the suggestions of Aziz N replied on September 8, 2010 and check the issue.
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/i-get-a-message-not-compatible-with-this-signal/206d6023-a7a2-4DC9-bc3a-01d382a3acbdI hope this information helps.
Please let us know if you need more help.
Thank you
-
Epson XP200 not to connect to the laptop. Printer works fine by itself.
A new Epson XP200 connects to the laptop. Printer works fine by itself.
From Internet Explorer
Original title: connection
Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help -
IPad no charging current after the update to IOS 10, when connected to the laptop.
My Ipad no charging current after the update to IOS 10, when connected to the laptop. But fine load with Bank charger or battery with the same cable brightening.
PL suggest how to overcome this problem.
Have a look here If your iPhone, iPad or iPod touch won't charge - Apple Support
-
Hello team,
Does anyone has a software that can give the ip address for any device connected to the laptop, as the Council of access control?
Thanks for helpLookAtLAN network monitoring is one of these tools.
SuperScan is probably better, but I have not tried.
-
The Dell laptop I bought is little used, not refurbished a downsizing Corporation. I bought a refurbished by Cisco, Cisco Linksys router. I can't stay on the internet for any period of time. At the time that I open the browser, after the wireless connection, it goes your 'connected' to 'no internet access. If I go through the diagnosis and fix it, it says I'm connected, but 'no Internet' returns quickly. It shows a diagram of the connectivity of the laptop to the router but not to the internet router. I had a second router refurb sent, and it does the same thing.
This is all new to me (wireless and mobile), so my words my being turned off, but I wonder if it might be the wireless card, or network card (or is it just a different name for the router). I mean, it's something in the laptop. If I plug the DSL directly into the laptop, I have a perfect internet connection, so I did not thing is my provider.
Any help/suggestions appreciated!
My issue was with the ATT modem not set to fill mode. modem was not accept what he said was the router.
-
Printer on Windows 7 PC, unable to connect with the laptop with Vista
I have a Lexmark 2600 Series printer on a Windows 7 32-bit computer. I am not able to connect to the printer with Vista laptop for my wife. I can share files and see the printer. I try to connect and I get "Windows cannot connect to the printer. Impossible operation completed (error 0x000003eb). "I tried to install locally and change the path without success. Any help would be much appreciated.
Hi Zyfot,
First of all, I would say that you add the printer on the vista computer and check.
1. open Printers by clicking the Start button, clicking Control Panel, hardware and soundand then click Printers.
2. click on Add a printer.
3. in the Add Printer Wizard, select Add a network, wireless or Bluetooth printer.
4. in the list of available printers, select the one you want to use, and then click Next. If your computer is connected to a network, only printers listed in Active Directory for your domain are displayed in the list.
5. If prompted, install the printer driver on your computer. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
6. follow the steps in the wizard and then click Finish.Install a printer on a home network
http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-printer-on-a-home-networkNetwork printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problemsAlso, make sure that the print spooler service is running on the windows vista computer.
A print spooler is the service that temporarily stores the disk printing hard or in memory until the printer is ready to print.
You must be logged on as administrator to perform these steps.1. open Administrative Tools by clicking the Start button, then Control Panel. In the search box, type Administrative Tools, and then click Administrative Tools.
2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
3. right click on the print spooler service, and then click Properties.
4. under the tab general , next to Startup type, make sure that Automatic is selected.
5. If the service is not already running, under Service status, click Startand then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
I have not performed a synchronization of the iPad to iTunes in almost a year. Since that time PC now works Windows 10, iTunes does not connect with the iPad or the iPhone 6. Any suggestions?
Thank you
To work with iOS 9.2, you must update iTunes to 12.4 v.
-
Windows XP crashed, now unable to connect to the net cause usb 760 not register
Windows xp installed 2 GB high speed, downloaded 99% vzam, froze, rebooted, frozen, restored before installation, froze, now run anything? What should do? Unable to connect to the net cause usb760 will not register...
Hello
1 have had any changes made on the computer before the show?
2. do you get an error message? If Yes, what is the full and exact error message?
Method 1:
See the article and check if that helps:
To establish an Internet connection
Method 2:
Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Maybe you are looking for
-
text of emails downloaded becomes corrupt, moved to other emails or just deleted
A block of downloaded emails, a few days ago will come back three weeks, have altered the text, moved or simply deleted text. The corrupted text looks like its Web page code or source code. Sometimes the text of a message will be displayed, not corru
-
Cooperation Outllook Express and Outlook 2010
I have a desktop with Outlook Express and a laptop with Outlook 2010 using the same email address (for a small business). When I open Outlook Express, everything disappears from the Inbox in Outlook, even if I watched it. I really need as a whole.
-
Copy filters e-mail account one hotmail to another
I've implemented a number of rules to sort messages (incoming) on my Windows Live Hotmail account. Is it possible to copy rules to another Hotmail account, or should I set them up again individually in the other account?
-
Microsoft Fix It will not work on my computer - error message undetermiined
I downloaded the Microsoft Fix It program to fix my computer - as sugested on another problem, now Microsoft Fix It cannot fix because another program running on my computer? is the original Microsoft Fix It stop running?
-
List always comes back to the high point of the page
I use a component of QNX list with a CellRenderer class and when I have more items that can fit on the list box, I have scroll down, but the list bounces to the top element. Here is the code I use to create a list: MYLIST = new List(); my