Windows XP - power loss diets

Similar Questions

• W500 power loss

  I had a W500 WIndows 7 that turns off, usually unexpectedly while you sleep, but sometimes too, so on. Disable it happens as if the power is lost (for example, the battery/cord are torn out). After a turn off like that, I sometimes need to reconnect the battery and the power cord. Doing some reading here and elsewhere on the web and came upon the electrostatic suggestion. Was able to go back at least a few times by touching the underside of the laptop, but it worked erratically.

  Since it occurs especially when the unit is in standby, I pretty much dismissed temperature and software problems.

  Decided to check the spindle of memory section bending solution. My laptop needs to have his palm rest took off to access the RAM modules. People kept on some pins door RAM, but since mine is not a special door of the RAM, I folded the pins at the bottom of the palm rest, and so far, no loss of power, but it is too early to tell.

  Laptop computer BTW is not guaranteed. Any suggestions? What I did is generally useful? Any other reason power loss sudden that I'm missing? (other than a software, heat and electrostatic)

  Thank you!!!

  Do you have a spare battery? I've seen these cause the problem you describe

• Z600 workstation: workstation Z600 not auto start after power loss

  I use a HP Z600 workstation.

  BIOS version

  786 G 4 V0.3.54

  OS is duel boot Windows 7 Professional 64 - bit Ubuntu & 14.04LTS

  Using Setup F10 I have:

  1. active Advanced-> Bios Power On for all days of the week and took one hour for power on

  2. under Advanced-> Device Options, I enabled wake on lan

  3. under advanced-> power on-> Options after the loss of power, I put the option "always on."

  If push the power on button on the front of the machine, it auto starts with Linux.

  If I pull the plug, the machine switches off immediately.

  If I plug the machine in, nothing DON'T get PAST!

  It lights up. I have to press the button.

  If I unplug the machine and then plug it in and wait for the moment Pwoer of BIOS on, do NOT start machine or turn on at the set time. Again, I must press the button to turn it on.

  What I'm missing or doing wrong. The machine is used as a remote server. It should restart automatically after a power loss.

  Any help would be greatly appreciated.

  Nothing changed and the problem disappeared.

  Had a power outage for 4 hours in the building.

  When the power was restored machine automatically restarted.

  So pulling plug on Z600, machine is not self-priming.

  Be able to fail the entire building: boots of router, monitor, Z600 and machines.

• I meet an event Microsoft-Windows-Kernel-Power 41 randomly

  every once and a while I meet this event, and it begins to multiply like playing games. Computer is brand New.here is the log of errors that I got:

  Log name: System

  Source: Microsoft-Windows-Kernel-Power

  Date: 03/08/2012 23:08:47

  Event ID: 41

  Task category: (63)

  Level: critical

  Key words: (2).

  User: SYSTEM

  Computer: Frogger-PC

  Description:

  The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.

  The event XML:

  41

  2

  1

  63

  0

  0 x 8000000000000002

  9687

  System

  Frogger-PC

  26

  0 x 5003

  0xfffff70001080000

  0x18e6a

  0x18e601f031cd4

  fake

  0

  any help would be greatly appreciated.

  It has been altered RAM I ran a Memtest86 + and 1 DIMM are back with 199 errors after 1 Pass

• How to manage Windows Vista power management features

  Hi guys

  I searched a bit in the technical knowledge of the Toshiba and found a very interesting article on Windows Vista power management features.

  * [How to manage Windows Vista power management features | http://aps2.toshiba-tro.de/kb0/HTD84026Q0000R01.htm] *.

  The fact is that you will not find one tool of Toshiba Power Saver on Vista as on Windows XP laptops and the parameters energy saver is a bit hidden in Vista power saving settings.

  But you can also control some options as a method of cooling or power saving Mode.

  I think that it could be interesting for some people here in the forum!

  Greetings to all!

  Thanks JayJay.

• Microsoft Windows kernel power? Help!

  BODY {font: x-small "Verdana"; margin-right: 1.5em} .b .c {cursor: hand} {color: red; do-family: "Courier New"; make-weight: bold; text-decoration: No} .e {margin-left: 1em; text-indent:-1em; margin-right: 1em} Laurette {margin-left: 1em; text-indent:-1em; margin-right: 1em} .t {color: #990000} .xt {color: #990099} weather {color: red} .dt {color: green} ".m" {color: blue} .tx {police-weight: "BOLD"} .db{text-indent:0px;margin-left:1em;margin-top:0px;margin-bottom:0px;padding-left : .3em; border-left: 1px solid #CCCCCC; {font: small mail} .di {make: small Courier} .d {color: blue} .and {color: blue}.cb{text-indent:0px;margin-left:1em;margin-top:0px;margin-bottom:0px;padding-left:.3em;font:small Courier; color: #888888} .ci {font: small mail; color: #888888} PRE {margin: 0px; display: inline}

  < event="" xmlns=" http://schemas.microsoft.com/win/2004/08/events/event">

  < system="">

    < providername=" Microsoft-Windows-Kernel-Power" guid=" {331C3B3A-2005-44C2-AC5E-77220C37D6B4}">

    < eventid="">41

    < version="">2

    < level="">1

    < task="">63

    < opcode="">0

    < keywords="">0 x 8000000000000002

    < timecreatedsystemtime=" 2010-08-28T16:02:41.738412600Z">

    < eventrecordid="">56702

    < correlation/="">

    < executionprocessid=" 4 " threadid=" 8 ">

    < channel="">System

    < computer="">JohnsMachine

    < securityuserid=" S-1-5-18 ">

   

  < eventdata="">

    < dataname=" BugcheckCode ">0

    < dataname=" BugcheckParameter1 ">0 x 0

    < dataname=" BugcheckParameter2 ">0 x 0

    < dataname=" BugcheckParameter3 ">0 x 0

    < dataname=" BugcheckParameter4 ">0 x 0

    < dataname=" SleepInProgress ">fake

    < dataname=" PowerButtonTimestamp ">0

   

   

  It is an error code that I got after that my laptop stops just randomly then he was playing wow. I have completely disassembled my laptop and looked around inside. There was no accumulation of dust on the processor or any circuit for this fact. I think it is a heating problem but I'm not sure. Help, please!

  There are a number of other possibilities, it might be as well as overheating.  See:http://support.microsoft.com/kb/2028504

  and for a long read: http://social.technet.microsoft.com/Forums/en-US/w7itproperf/thread/9e71f600-7c62-4869-8236-964e93d17936 and http://social.technet.microsoft.com/Forums/en-US/w7itproperf/thread/9e71f600-7c62-4869-8236-964e93d17936

  You are looking for an audio driver from Realtek updated if you this audio chipset.

• HP ProDesk 400 Mini G2: Power loss / recovery

  How can I make the Mini ProDesk of G2 400 HP auto-start after power loss. I don't find this settings in the BIOS.

  @HPAC15

  Have you looked here?

  

  REO

• Backup center and restoration', 'System', 'Windows Update', 'Power Options' and a few others in Control Panel not responding

  Original title: clicking on but nothing happens

  When I select "backup and Restore Center', 'System', 'Windows Update', 'Power Options' and a few others in Control Panel, nothing happens. Sometimes a window flashes for a split second before disappearing. Any suggestions?

  Hi Ron68PB,

  1. you remember to make changes to the computer before this problem?

  2 are you able to open other programs?

  3. do you get error messages or error codes?

  Method 1:

  You try to run a SFC scan to check the corrupted system files.

  You can read the following article to launch the SFC scan:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Alternatively, you can try to check if the problem occurs in safe mode.

  Check out the link:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer

• Get a Microsoft-Windows-Kernel-Power event ID 41 error

  * Original title: Event Id 41

  Okay, I need help in a while now, I've got the same errow:

  Lognavn: System
  Quiet: Microsoft-Windows-Kernel-Power
  Dato: 02/07/2015-20:47:21
  Haendelses-id: 41
  Opgavekategori (63) (63).
  Level: Kritisk
  Nogleord (2) (2).
  Bruger: SYSTEM
  Computer: oliver
  Beskrivelse:
  Preferential har genstartet uden at lukke ned town forst. Denne r. kan LED to preferential er op holdt med to svare, er gaet ned, eller at Strømmen forsvandt uventet.
  Haendelses-Xml:
  
   
     
      41
      3
      1
      63
      0
      0 x 8000000000000002
     
      56325
     
     
      System
      oliverc1234
     
   
   
      209
      0xffffd0002a830000
      0x2
      0 x 0
      0xfffff800503b5353
      0
      0
      0
   
  

  and I did what I could do, but it keeps coming up any ideas what I can to provent to come again?

  Hi Oliver,.

  Sorry for the late reply and I appreciate your patience.

  The kernel power event 41 ID error occurs when the computer is off or it restarts unexpectedly. Starting a computer that is running Windows, a check is made to determine if the computer has been properly closed. If the computer was not closed properly, a kernel Power event 41 message is generated.

  I suggest you to consult the article below the link https://support.microsoft.com/kb/2028504?wa=wsignin1.0 and check if it helps.

  Please do not answer with others and we will be happy to help you.

• Inspiron 3646 not restart after power loss

  I put the BIOS is still on after power loss. But it does not work. The computer turns on after turning the power on. The version of the BIOS A04. On the site, said the new BIOS A05 but instead of downloaded BIOS file doc. What would you advise?

  Thank you!

  I just wanted to know all that tech Dell dispatched to install a new motherboard for my 3646 and this fixed the issue of recovery of AC.  He gets now as it should be when the value "On".

  So you don't have to bother waiting for an update of the BIOS, get your motherboard replaced.

• During installation my PC (new) power loss; How to remove a partial installation of PE and start fres

  During installation my PC (new) power loss; How delete a partial installation of PE and start again?

  I would normally do a system restore, but, given the new PC - literally old - 2 hours I don't want to go this route so avoidable

  Hi xpkrqschism,

  You must manually remove partially installed files and folders from the system.

  Please see KB: http://helpx.adobe.com/photoshop-elements/kb/manually-remove-photoshop-elements-11.html

• Installation of Windows 7 crashed after power loss

  I desperately need some help here, myself being not not a computer genius.

  I has been upgraded from Vista to W7 and left the laptop unattended topic step 6 (I think).

  When I returned however, my laptop was powered down, as the power cable had came out. Now when I go to start windows, it tells me the installation was not complete, and I have to restart and restart the installation.

  The problem is that I can't do this, because I can't further in windows than this.

  What should / can I do?

  Hey,...

  Go into your BIOS settings to change the startup options so that it starts on the CD/DVD drive instead.

  You should be able to start it again.

  The only thing that can be a problem, it's that he CAN'T let you upgrade n he need to clean install? If someone else can confirm if it is the case or not?

  Worth a try?

• Satellite A30 - sudden power loss

  2 times recently my A30 suddenly just cut dead, almost like a power cut (even if it wasn't!). If I tried to re - start right away it would only have access to the login screen and then completely cut out again. If I leave then for an hour or two (cool?), it starts OK. Oddly enough, you do NOT receive the usual message "windows was not shut down properly, now check the drive for errors," i.e. it booted up just normally, however the 2 I was working on documents Word have been recovered OK.

  My feeling is that it may be a hardware failure, possibly related to the temperature? Someone out there you have ideas? Thanks in anticipation...

  Hello

  It could be an overheating problem. If the temperature drops to the critical limit for the operating system stops the unit. It is a thermal protection of the portable Toshiba.
  Well, the overheating problem is a very serious problem. I recommend to check for dust cooling fans. Try to clean it with the vacuum cleaner.
  If the problem persists then you should contact the service partner.

  Good bye

• Satellite Pro A300 - for Windows 7 power management strategy

  Hi all

  I have the following on my Satellite Pro A300 problem:

  My laptop fan works continuously, which means almost always turn. I cleaned the entire cooling with compressed air, so it is not clean, no problem with that. The reason is that in browsers when Adobe Flash Player runs, it loads the CPU and the GPU, so that the fan trying to cool the system.

  Now I ask you, is there any solution to fix this? I mean even to reduce the GPU clock speed when I do not use the graphics intensive applications.

  I use Google Chrome as default browser and the Windows 7 OS 32 bit.

  Thank you in advance.

  Hey Buddy,

  If an application load the CPU and the GPU it s normal behavior that the fan rotates and probably on top level so it s high usage. So don t you worry because everything is normal. The fan protects the equipment from overheating.

  What you can do is updated Google Chrome and Flash Player. Also try to use the most recent version, they also contain security updates.

  Last but not least, you can change the cooling method in the power management Windows (change the power plan settings). If you have installed Toshiba Value added Package, you can choose between optimized battery and a maximum Performance. Select optimized battery and fan activity will be less.

• Lenovo Y510P | Sudden power loss on unplug and operate the State cycling under the optimized battery

  Hello

  I recently came across these related problems on my Lenovo Y510P of power: model i7, 8 GB Ram, GT750M configuration.

  ----

  It started after I installed a new SSD for the system, the clean install of Windows 8.1 with all latest drivers except the previous version of the BIOS and Lenovo Energy Management. Until all this started, the battery would not charge I have troubleshooted and fixed this problem by removing the battery and holding down the Start button. Over the next few days, I started to have additional problems.

  When I unplugged the power adapter, the system suddenly put off the power. Here is what happens:

  1. turn on the system with connected adapter and battery attached.

  2. unplug the adapter

  3. quickly plug adapter

  4. Quick disconnect adapter again.

  5. the system turns off completely.

  Then, I started to notice that the "Battery optimized" regime, the power state would be cycle between power adaptor and batteries, as observed in the cycling of screen brightness and performace cobs. This has happened only if the battery charge level was higher than 60% but less than 98%. Regularly, I used this energy system and did not notice this problem until very recently.

  ----

  I reinstalled the original SSHD (same OS and driver installation methods), where these issues were not present in the past. However, two problems remained.

  I've updated the BIOS and the Lenovo Energy Management to the latest versions. Two problems persist.

  ----

  I would appreciate any help or insight. My tech knowledge level is above average, so feel free to use the advances or procedures. Thank you!

  I don't know what the problem at the moment with your laptop, but if it's a problem with the power supply or the battery it can easily lead to a fried motherboard.

  I would like to communicate with Lenovo and send the laptop for repairs or ask for a replacement charger and battery.