Windows xp SP 3 installation

Similar Questions

• Boot Camp supports only Windows 7 or later installation on that platform. Please use a file ISO of Windows 7 or later installation.

  Hello

  I tried to fix this for hours, I hope someone can help me.

  I downloaded the ISO "Win10_1607_English_x64.iso" (4.29 GB) file and with him came a "info.plist" (2 KB), so they are both on my 64 GB USB Drive (format: MS-DOS (FAT32)) called 'WINSTALL '.

  I have the ISO on the USB key, and it is selected as the ISO image in Boot Camp. I also have the USB the disk of destination selected, and yet I get this error:

  Your bootable USB key could not be created

  Boot Camp supports only Windows 7 or later installation on that platform. Please use a file ISO of Windows 7 or later installation.

  I'm currently under OS X El Capitan Version 10.11.6 on my iMac (21.5 inch, end 2012) that is compatible with Windows 10.

  If anyone can help me I honestly love so much, I tried contacting Apple Support staff by phone, they said that they can't do anything, I tried to contact their Live Chat, but none of this has helped to solve the problem, and I tried to look online, but can't find too much.

  Thanks in advance for any answer!

  What OSX Version do you have? This site gives the requirements of Bootcamp: minimum system requirements to install Windows on your Mac with Boot Camp - Apple Support. And you did an upgrade? Could it be that the upgrade will not correctly for the OS?

  Looking at the 10 Windows version you downloaded, is the update of birthday, which was released less than a month ago. It could be that Apple is not reconisgin the Windows version when reading the disk, because it is too recent. I don't know if you have access to the download of the previous generation and do a Windows update?

• Error code: 0x800A0046 while windows update sites access & installation of updates... ?

  Error code: 0x800A0046 while windows update sites access & installation of updates... ? Regds, 'a journey of a thousand miles begins with a first step."

  "Resolution of the error code: 0x800A0046".

  To resolve this problem, follow these steps on the client computers. Step 1: Verify the DCOM security

  1. Click Start and run, type Dcomcnfg, and then click OK.
  2. Expand Component Services and then expand computers.
  3. Do right click my computer and then click Properties.
  4. Click the COM Security tab
  5. Under access permissions, click on change by default.
  6. Check that the following accounts are listed:

     On Microsoft Windows XP-based and Microsoft Windows Server 2003 clients

     The collapse of this Expand table this table

     Account name	Permission type	Permission
     Gites, administrators or a user who belongs to the Administrators group	Local access	Allow
     System	Local access	Allow

     On clients based on Microsoft Windows 2000

     The collapse of this Expand table this table

     Account name	Permission type	Permission
     Directors	Local access	Allow
     System	Local access	Allow

  7. If either of these accounts is missing in the access permission box, follow these steps:
     1. Click Add, click Advanced and then click locations.
     2. In the location box, click the Local_Computer_Name and then click OK.
     3. Click Find now.
     4. Press CTRL and click the required account names, and then click OK twice.
     5. In the group or user names box, click an account that you have added, click Local access in the permissions for box Account_Name and then click to select the check box in the column allow.
     6. Repeat step 7 for all accounts that you just added, and then click OK.
  Step 2: Check the DCOM default properties
  1. Click the default properties tab.
  2. Make sure that the following configuration:
     • The Enable Distributed COM on this computer check box is selected.
     • In the default authentication level box, the connection is selected.
     • In the default impersonation level box, the identification is selected.
  3. Make the necessary changes and then click OK.
  4. Restart the computer.

  Step 3: Verify that your user account is not a member of the guests group note this step applies only to computers that are running Windows Server 2003, Windows XP Professional, or Windows 2000 and that are not joined to a domain.

  1. Click Start, click settings, and then click Control Panel.
  2. Double-click Administrative Tools.
  3. Expand computer management, and then expand local users and groups.
  4. Click users.
  5. In the right pane, double-click the account that you used to log on the computer.
  6. Click on the Member tab of.
  7. Click guests, click on remove and then click OK.

  Step 4: Check the security descriptor in customers service updates automatic-based on Windows Server 2003 and Windows XP-based

  1. Click Start, run, type cmd, and then click OK.
  2. At the command prompt, type the following command and press ENTER to reset the security descriptor:
     SC tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)

     Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.

  Windows 2000-based clients

  1. Download the Subinacl utility. To do this, visit the following Microsoft Web site:
     http://www.Microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b & amp; amp; displaylang = in (http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf-ed6985e3927b & amp; amp; DisplayLang = en)
  2. Double-click on the downloaded file and follow the instructions in the Windows Resource Kit Tools Setup Wizard. By default, the Subinacl utility is installed in the following directory:
     C:\Program Files\Windows Resource Kits\Tools
  3. Click Start, run, type cmd, and then click OK.
  4. At the command prompt, type cd C:\Program Files\Windows Resource Kits\Tools to move to the directory where the Subinacl utility has been installed.
  5. Type the following command and press ENTER:
     Subinacl/service wuauserv /sddl = D:(A;;) CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  1. Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.
  Step 5: Check the local security policy

  Notes

  • This step applies only to the Windows Server 2003-based, Windows 2000-based, or Windows XP Professional computers.
  • If your user account is in a domain, this security setting may be configured by a Group Policy object that is located on the network. Contact the network administrator, or see the following article for more information Microsoft Knowledge Base:
    810739 (http://support.microsoft.com/kb/810739/) white paper: Troubleshooting Group Policy in Windows 2000
  1. Click Start and run, type gpedit.msc, and then click OK.
  2. Expand Computer Configuration, expand Windows settings, expand Security settings, and then expand local policies.
  3. Click user rights assignment.
  4. In the right pane, double-click on impersonate a client after authentication.
  5. Verify that the Service accounts and directors are included.
  6. If the Service account or the Administrators account is missing, follow these steps to add the account:
     1. Click on add a user or group, click Advanced, and then click locations.
     2. In the location box, click Local_Computer_Name, and then click OK.
     3. Click Find now.
     4. Press CTRL and click the required account names, and then click OK three times.
  7. Restart the computer.

  Step 6: Enable the persistence of user data in Microsoft Internet Explorer

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.
  3. Click the Security tab, and then click Internet.
  4. Click on custom level.
  5. In the settings dialog box, scroll down to the Miscellaneous section.
  6. Under the Userdata persistence, click Activate.
  7. Click OK two times.

  Kind regards
  Sohail Patel

  Regds, 'a journey of a thousand miles begins with a first step."

• Cannot install KB973688: error: Windows Setup: error opening installation log file

  Original title: cannot install KB973688

  After you download http://www.microsoft.com/downloads/en/details.aspx?FamilyId=00bcdf28-2299-4150-964d-88a601e25229&displaylang=en#Instructions

  I run the file and get the error message from Windows install: error opening installation log file. Verify that the specified log file location exists and is writable

  Hello

  Try this:

  Step 1: Run the file as administrator.

  a. right click on the downloaded installation file.

  b. Select run as administrator.

  c. then follow the installation wizard.

  Step 2: If it does not help, reset the windows updates and then try to install the update.

  How to reset the Windows Update components: http://support.Microsoft.com/kb/971058  

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Just installed windows 7 on a hpp6130y that I bought in August came with free Windows 7 upgrade after installation I lost microsoft works and other software that has been pre loaded on pc.

  Just installed windows 7 on a hpp6130y that I bought in August came with free Windows 7 upgrade after installation I lost microsoft works and other software that has been pre loaded on pc.

  How your post is related to Windows Update (compared to the Windows upgrade)?

  Contact HP support.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I am trying to install windows XP Professional. Installation stops with error "0x0000007b".

  How to install Win XP on PC with intel i3 processoe running win7

  Hello

  I'm working with a legacy system. My programs to work with Windows XP and more excellent only.

  Now, one day I can not PC with Windows XP we have windows 7 to house high-end system running on the desktop computer intel i3 processor.

  I am trying to install windows XP Professional. Installation stops with error "0x0000007b".

  The new PC with SATA HDD and CD ROM, I was told that windows XP Setup has no support for SATA drives, at the same time if I want to install the drivers, that it seems that for the floppy drive. Thus, it is difficult to install the drives.

  Also when I spoke to Dell Tech support person, he said I can't install Windows XP on the Intel i3 processor. I don't think, but I will this differ from expert.

  Can someone help?

  Hi Steve,.

  You can follow this link & check if the problem persists:

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

  
  Reference: Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  If the problem persists, please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• I have windows xp after the installation of service pack 3 I can only start in safe mode

  I have windows XP after the installation of service pack 3 I can only start in safe mode?

  Hello

  ·         You get the error message?

  ·         What happens when you try to start in normal mode?

  Method 1

  Windows XP can in every start Safe Mode by default. Even if you select the option Start Windows normally, it always starts in Mode without failure. IOW, you can't get out of safe mode.

  This happens if the switch/SafeBoot is added to the Boot.ini file. / SafeBoot parameter forces a boot in safe mode by using the specified parameters. The available parameters are:

  (a) minimal (b) network (c) safeboot: minimal (alternateshell) For more information about the boot.ini switches, see visualization and correction of the settings of the boot on x 86 systems RESOLUTION (a) click Start, run and type MSCONFIG (b) click the Boot.ini tab (c) If you have a dual-boot system, select the entry that is appropriate under the [operating systems] (d) in section downstairs, Startup Options uncheck / hisFEBOOT (e) click OK (f) restart Windows The entry/SafeBoot are removed from the Boot.ini file.

  Method 2:

  If the above method is not the cause, it seems that Service Pack 3 is not installed correctly.

  Step 1: You try to run the system restore from safe mode that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  Step 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  Note: System requirements to install Windows XP SP3

  Reference: Learn how to install Windows XP Service Pack 3 (SP3)

  Hope the helps of information.

• Windows XP Service Pack 3 error "Windows has no load installer for hdc.

  service pack 3 Windows could not load the installer for hdc

  having problems installing SP3, error message "windows has no load installer for hdc.

  Hi Doug,.

  See the following article to find out how to install Windows XP Service Pack 3.

  Steps to take before you install Windows XP Service Pack 3

  See also:

  How to troubleshoot an installation fails on Windows XP Service Pack 3

• This operation requires an interactive kiosk to Windows - error during the installation of a MICROSOFT WIRED KEYBOARD 600

  Hello

  I get the error "this operation requires an interactive window station" during the installation driver for a new (working) Microsoft Wired Keyboard 600. I tried to disable my Avast! anti-virus program entirely to restart my system in selective mode with only Windows running programs to install the keyboard. None worked.

  The selective mode does not work. And Device Manager shows the device with the yellow triangle icon. With the code 28 error. "This operation requires an interactive window station.

  I'm using Windows Vista Home Premium (32 bit)

  Also the comfort curve keyboard 2000 from Microsoft that was previously used with this system can no longer install into any usb port. It only works in the USB port it was previously installed. IM happy that I can still use this keyboard, otherwise I would be even more crazy. Usually, I am not asking these questions, I'm the guy 'tech' at home, and I tried all possible options. This topic made me rage a little, because: Microsoft Keyboard on a Microsoft Windows computer does not work. I mean, what the hell.

  Sorry for the typo I made, the CCKeyboard2000 Im using now randomly constantly through... it is why he was replaced.

  Paul

  Hi Paul,.

  Please contact the Microsoft Community.

  I'll get to see the steps of troubleshooting from here-

  http://www.Microsoft.com/hardware/en-us/support/troubleshooting

  In addition, I would like to you contact Microsoft Hardware Support for assistance more.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  We know if you need help.

• Cannot start Windows Vista, even dvd installation

  I started my Dell Inspiron 1420 under Windows Vista Home Premium in place and led to a warning screen indicating an error in startup.  As stated, I started from my Vista installation DVD.  I ran the Startup Repair tool, and it failed.  The event log has been as follows:

  Problem event name: StartupRepairV2

  Problem event Signature 01: external Media

  02: 6.0.6001.18000.6.0.6001.18000

  03: 0

  04: 65537

  05: unknown

  06: no Cause root

  07: 0

  08: 2

  09: WrpRepair

  10: 87

  OS version: 6.0.6001.2.1.0.256.1

  Locale ID: 1033

  I then ran the System Restore tool and it failed.  I then ran the Memory Diagnostics tool, and it found no errors.  Given the lack of success, I decided to reformat and reinstall.  I used the Advanced Options in Windows Vista Setup DVD to remove the Partitions, format the drive and install Windows.

  Post installation Windows started successfully the first time but was running slowly.  I tried to download the drivers from the CD of Installation of Dell, but automatic execution failed, and when I tried to copy individual files, it also failed.  I decided to reboot the machine, but instead of Windows, I got a blank screen with white cursor blinking in the upper left corner.  I tried to reboot from the Installation DVD and once the progress opening white Windows files completed bar, I was presented with a black screen and a cursor again.

  Since then, I was not able to start any CD/DVD successfully.  What should I do now?  I am happy to reformat and try again, but I can not even on the screen to do.

  Help!  Please?

  Hello Nick_98,

  If we are hanging up when you use the installation disc, then the installation disc has problems or hardware on the computer problems that must be addressed before moving forward, there

  I advise to use diagnostics provided by your manufacturer to check for hardware problems.

  Please note that if the equipment passes the test, it simply means that no error has been detected it.  If we turn to the top of the sensitivity on the diagnosis, we can find errors.

  Best regards

  Matthew_Ha

• Are the installation DVD of Windows Vista Enterprise and installation DVD of Windows Vista other than company completely different?

  Installation DVD of Windows Vista business and Windows Vista DVD installation, other than the company

  Are the installation DVD of Windows Vista Enterprise and installation DVD of Windows Vista other than company completely different? If so, how are they different?

  Hello

  This edition targets the enterprise of the market segment: it includes a superset of the Vista Business edition. Additional features include support for packets from the Interface user multilingual (MUI), BitLocker Drive Encryption, and UNIX application-support. Not available through retail or OEM, this edition channel sale will get distributed through Microsoft Software Assurance (SA). Since Vista Enterprise classes as a benefit of Microsoft Software Assurance, it includes several benefits HIS only, including a license allowing the execution of up to four virtual machines running a mixture of editions of Vista and the versions [13], access to Virtual PC Express and activation via the VLK. [14] Vista Enterprise supports up to two physical processors. [7] 64-bit Enterprise supports 128 GB of RAM

  Windows Vista Enterprise made salient

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Vista-Enterprise-highlights

  Compare Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/compare

• Problem with Windows Mail - "you have a different flavor of Windows Mail installed. Installation cannot be completed. »

  My OS is Windows Vista. Whenever I get an update for Windows mail, going through the installation process it stops and gives me a message, "you have a different flavor of Windows Mail installed. Installation cannot be completed. "Should I uninstall Windows Mail and re - install (if so, how?) or do something else?

  Which tells you that this error is that you already have an improved version, but you can use uninstall a program from your control panel or by cheque in programs and features.

  I think that you will search the windows live essentials 2011.

  You may still need to change the way you receive updates recommended by microsoft,

  They install allocate optional updates of windows in this setting.

  But at this point, I'm not sure if your use of webmail or live messaging software essentials 2011 updated?

  You indicate that you want to upgrade? TO?

  One thing you should know Messenger sees some problems so the upgrade is not a good idea right now, and if you are using ie 9 it's really going to be more trouble that it's worth.

• Wireless Laser Mouse 5000 Windows 7 64-bit installation challenge

  Wireless Laser Mouse 5000 Windows 7 64-bit installation challenge continues to get customer assistance contact support when you try to load the software to control the mouse buttons and the speed of response.

  Suggestions?

  Hi OrlandoM,

  Using the latest 64-bit drivers? Visit the Microsoft Hardware site and download the latest 64-bit driver software:

  http://www.Microsoft.com/hardware/download/download.aspx?category=MK

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web:http://www.winuser.co.uk;  Web: http://xphelpandsupport.mvps.org;  Web: http://vistasupport.mvps.org;  Web: http://www.silversurfer-guide.com

• PowerEdge 2600 and Windows Server 2008 R2 installation problem

  Hello.

  I have a Dell PowerEdge 2600 server. Here is the configuration:

  BIOS version: A14

  2 x Intel Xeon 2800 MHz 533 MHz, 512 k (SL6VN)

  4 x 1 GB of RAM

  2 x 146 GB (IBM-IC35L146UCDY10-0) in RAID1

  6 x 147 Gb (Fujitsu MAP3147NC) in a RAID5 configuration

  Firmware for the PERC 4/Di 2.52D

  It has worked well during the installation of Windows Server 2000. But now I need to install Windows Server 2008 R2.

  Here's the problem: when I boot server to Windows Server 2008 R2 installation DVD, it starts to load the files and after a few minutes shows an error (I copy the exact error number) who said he's trying to run the 64-bit application, but unfortunately, this processor does not support 64-bit applications.

  I was able to find a download for Windows 2008 x 64 on the page Support of Dell PowerEdge 2600. This means that you can install an operating system 64-bit on this PE 2600, is it not?

  I know that Windows Server 2008 x 64 and Windows Server 2008 R2 are different operating systems, but 64-bit is always 64 - bit.

  Also, I know that Intel Xeon 2800 MHz 533 MHz 512 kb (SL6VN) is a 32-bit processor, but if it was delivered with these processors, and there are downloads for 64-bit operating systems exist, it should be able to install these operating systems.

  Please tell us how can I install Windows Server 2008 R2 on the PowerEdge 2600.

  Thanks in advance.

  The list 2008 x 64 in the list of OS for the 2600 is clearly a typographical error / support/web content team:

  • The 2600's chipset does not support ALL 64-bit processors
    http://Ark.Intel.com/products/27741/Intel-E7501-memory-controller
  • No. 6 systems are supported on 64-bit OS - not all listed here, but the 6600 lists NO 64-bit OS (8 G was the first):
    http://advisors.Dell.com/AgileWeb/iDrivematrixView.aspx
  • 2003 x 64 is not no more, which would be if 64 bits have been supported all the

  You pay for 2008 x 86 as the latest OS on 2600... or get a newer server (starting with the 8th generation of servers as the PE 2800) to operate 2008R2.

  "2008R2 is a 64-bit operating system that is not as forgiving as 2008 x 64 on the execution of threads of 16 bits."

  16-bit applications are not supported in 64-bit operating systems:
  http://blogs.technet.com/b/chitpro-en/archive/2009/04/14/Windows-and-16-bit-applications.aspx

• Where can I download Windows 7 Home basic installer?

  I have my genuine CD key with me, but unfortunately, I lost my Installer.  Where can I download Windows 7 home basic installer?

  Reinstall Home Basic

  You will need a whole in a single installer disk that you can use to select Windows 7 Home Basic Edition during installation. See the following for instructions:

  For a DVD that contains all the flavors of 32-bit and a DVD that contains all the flavors of 64-bit that is Windows 7 Starter,Home Basic , Home Premium, Professional and Ultimate see

  here.

• Windows 7 cannot complete installation, halfway, it stops and gives me the message "windows Setup could not configure windows for the hardware on this computer.

  Windows 7 cannot complete installation, halfway, it stops and gives me the message

  "windows Setup could not configure windows to run on a hardware on this computer.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.