Windows7 HEEEELP S10-2

Good evening everyone

I am writing u now of the Quick Start browser. I made a big mistake. I had default Windows7 and I installed Windows XP black edition. This is my first contact with netbooks, and I wanted to lear how can I start USB system. So, I installed Windows XP Black edition.  I have format the HARD drive.

Now, I want to go back for windows7 with recovery tool (you know, the arrow next to the button works / stop) but an error message and I don't know what to do because even after the error message, I can't approach of windows by default.

Thus, (1) I can't use the recovery tool (does not work correctly) and (2) the only tools I got are BIOS a. and b. quick start

Oh, thank you Lenovo for QuickStart!

P L E A S E H E L P M E

I'm not diving with your unit, but most netbooks have a couple of partitians on the hard drive.  One of them is restoring information.  If you have formatted the drive all the restoration part is probably gone.  If you have formatted only C: the restoration partition should be on D: or some other partitions.

If you format the drive and that you did not backup CD I guess you're out of luck on the restoration.  Some manufacturers sell the restore disks so that you could give you a call if someone else comes with an answer for you.

Tags: Lenovo Notebooks

Similar Questions

  • Windows7 for Tecra S10

    I have Tecra S10 - 11A.
    My laptop supports windows 7? If that's what about additional programs as utility HARD drive protection, software fingerprint, pc monitor.

    Where can I download them?

    According to information document http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01.htm Toshiba Tecra S10 is Win7 supported.
    I checked the Toshiba Win7 download under http://eu.computers.toshiba-europe.com/innovation/windows7_drivers.jsp page and your laptop model is still not listed there.
    Occasionally check this page to see if the drivers are available.

    For models Toshiba laptops will offer all the drivers, tools and utilities for Win7. So you will not have problems to run all the things you asked for.

  • s S10-3 wlan driver problem

    Hello, my problem is that I can't use WiFi on my netbook: s10-3s (model '0703'). I formatted the hard drive and install windows7 32 bit (before is was the same, but the starter edition). Usually everything works like magic with win7, but not with the hardware of this netbook. Graphicschip, Ethernet and WirelessLan did not work after the new installation of windows. I went on site support lenovo and downloaded all the drivers in the sections for material that did not work properly. This fixed my problem with the intel graphicschip and the ethernet controller, so I could connect to the internet via my router lan cable. After downloaded and installed all the drivers wlan 4 listed for my model, it was still not working. I have no more unknown device in Device Manager, but I does not recognize wlan networks, so I doubt that any driver worked. I read that the netbook can have one of these chips-WiFi: atheros, broadcom and intel. My netbook seems to have a broadcom one (it says "Broadcom 802.11n Network Adapter" in the properties of the adapter). the switch wlan on my netbook is turned on and the led is lit thanks in advance

    Ah good... How should I know this?

    I solved the problem by installing the power management driver...

    the feature of the fn + f5 was not installed at all. After installing the driver I could turn on wlan with fn + f5 and it worked.

    Good bye

  • Some Question on the S10-3

    I bought S10-3 MB-  With windows7 ultimate

    1. I can't Bluetooth daemon option?

    2 i insert a SIM card (as written on the user manual), but where is the control Module AirCard?

    3. If I install windows Xp professional SP3 problem above will solve?

    Please pull me up from here. I bought this netbook for just above 2 options

    for your own protection removed serial numbers

    -turn on the wireless switch and press fn + f5.
    If you don't see Bluetooth power option, you do not have bluetooth.
    -is in the slot for sim card, but you may need to buy wwan card.
    -I think not.

  • I like to keep an eye open when I go offline. Windows7

    [Firefox for Windows7]
    I "refreshed" Firefox settings by default and has not helped.

    What do you mean by "disconnect"?

    Is it through "file > work offline" or do you mean that you close Firefox and you want to reopen the tabs the next time?

    You can check the startup parameter:

    • Tools > Options > general > startup: "startup of Firefox:
      "Show my windows and tabs from last time '.
      "Show my home page".
      'Display a blank page '.
  • will be firfox 15.0 downloaded b inwindows7 32 bit running windows7 64-bit?

    I downloaded firefox 15.0 b setup.exe using windows7 ultimate 32 bit operating system. Firefox software asked me by the my friend if I giving my friend that is using windows7 ultimate 64 bit.will it works in his laptop?

    Yes Firefox 32 bit works perfectly on Win7 64-bit operating system.

  • Using the profile of windows7 on Ubuntu12.04

    I try to use my firefox on Windows7 in Ubuntu12.04 profile (installed with Wubi). I created a new profile and pointed at the correct profile folder, but I get the message:

    Firefox is unable to use the profile because it is in use.

    I tried to change only files containing passwords and cookies. No change. the old profile in Ubuntu works very well. Also checked the profiles.ini. Also tried it on Ubuntu in VirtualBox.

    Thank you.

    It is preferable not to use the same profile with different operating systems, because the paths of files that are used in some files are not compatible.

    Also, Ubuntu might not able to lock the profile correctly (Windows and Linux use a different method and files).

    The current versions of Firefox is no longer delete the lock file to make it possible detect start failures by looking at the timestamp.

    You can try using the links hard or soft links to specific files (sqlite databases and a few other folders).

    See these pages for a description of the files.

  • More 1740bytes cannot retrieve cache Firefox12 in Windows7.The files files files can store the maximum size of a single file only 1740bytes?

    I can't get flv (YouTube video) larger files that 1740bytes of Firefox12 in Windows7 cache files, cause whenever I have search in the files, I can only find files with unique maximum file size 1740bytes and video files flv from YouTube are significantly larger than that. So, how can I get it back only the cache YouTube video file?
    But Firefox12 does not have this problem occurs in Windows XP.
    Furthermore, what is the maximum single file size in Firefox12 cache files?

    It has just begun to surface on the Web more. This seems not to be a browser problem, as happens in my opera and IE too. Apparently, YouTube has decided to not let us perceive his videos more and their place is cutting in 1 740 ko somehow files be reconstructed with its own codes when needed to play. Others are also noticed that if you make a pause a video is not going to preload as it used to- but a short distance. No doubt it is pre-configured as a segment of 1 740 both and support even not all except if you look at all this.

  • Where can I find my favorites in my library of Windows7?

    I use Windows7.
    I can find my favorites (bookmarks) using my explore like this: computer/c:/user/name/favorites.

    When I use Firefox I also bookmark. How can I find it in my computer?

    I want to make a copy of my favorites and paste the copy to another computer in this way.

    See also:

    You can use this button to go to the Firefox profile folder:

    • Help > troubleshooting information > profile directory: opens showing the file
  • G6-2032tx: I LOST MY CD of DRIVERS AND WINDOWS7

    Hello! I lost the windows7 64 bit OS and the cd of drivers of my g6 g6-2032tx Pavilion. I have reformat with windows7 32 bit OS but when I look for the drivers in this site, the 32 bit OS is not drivers. Please send me copy of windows7 64 bit OS. Thanks, Moises

    Hello

    There are two options available.

    1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

    Order HP recovery disks.

    2 another option that you might consider is to create your own Windows 7 installation disc.

    Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

    An example of a COA label can be seen here.

    You can create a Windows 7 installation disc yourself using another PC - just download the Disk Image correct ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  The source of the Windows Image is Digital River.

    Windows 7 Home Premium 64 bit SP1.

    Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

    http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

    You may need, additional drivers and software are here.

    Kind regards

    DP - K

  • Satellite X 200 and Windows7 (32 bit) - card reader does not work

    Hi all
    I hope someone can help.
    My X 200-219 has been recently upgraded to Windows7 and although it works well (better), the card reader does not work.

    Do I need a driver installed?
    Various looked but can't find anything obvious?

    Bravo and thank you
    DB

    Hello

    Try to install THIS driverplease.

    It is Vista 32 bit driver for digital multimedia card reader. I hope that it will work.

    Send comments.

  • Tecra S10 - problem upgrading to SSD Kingston

    Hello!
    Tecra S10 - I am trying to upgrade HDD to Kingston SSD 128MD.

    During the new installation of Windows 7-64 installer complains that there is no boot device valid to create the system partition, even if the disk is recognized. BIOS is later, I tried configuring IDE and AHCI.

    Is there a problem of General compatibility with SSDS and the notebooks?
    I noticed a similar problem with satellite A200.
    Thank you

    Hello

    How do you update firmware?
    Have you checked if a firmware update is available and necessary?

    Found a page of Kingston providing SSD firmware updates:
    http://www.Kingston.com/en/support/technical/downloads?product=sv100s2&filename=KDID110225a

  • Issues of update/upgrade of equipment for Tecra S10-183

    Hello

    TOSHIBA TECRA S10-183
    Serial number: xxxxxxxxxxxxxxxxxxxxx
    Model number: PTSB3E-0YR04KGR
    Code BTO: P8700/2G/160G/15.4WBT/DS2/L/M/B/W/3G
    Pre-installed software: Yes [R11382GR]
    Purchase date: 13/05/2011

    I use above professional mobile phone use for CAD programming as well as for Office applications.
    2 GB RAM (standard), I can increase up to 4 GB Kingston (ex aequo) on purchase.
    With the 160 GB HARD drive, I had a lot at the beginning of the loss of speed.
    So I leave a month later to a switch of OCZ Vertex 120 GB of a second
    And lasted almost 9 months without problems.
    Now, I don't have so much free space in my SDS. So I would like to
    'Intel SSD 520 Series 240 GB 2.5 SATA III'
    Skip the leave.

    My question would be, I would get this problem?
    (1) in theory, SATA3 work perfectly well this SSD 240 GB right?
    In the manual, it is up to 120 GB SATA2 SSD in it. However, the 2009 manual. The information is very old. And at that time were not yet 240 GB free for end users of hard drives SSD SATA3.

    (2) is there any Windows Professional / Ultimate / Business 64 for 7 as this laptop?
    Original, I have Windows 7 Ultimate 32 bit. I wanted that my memory that expanded up to 8 GB. CAD program running on the 64-bit operating system much better.

    (3) is the card graphic and/or welded directly on my cell or can I leave replace it? It is a plug-in card?

    (4) can I switch to a processor / CPU? What size?

    (5) the Mobile UMTS and HSDPA / HSPAU / LTE is capable?

    (6) I still can't be on the Toshiba support site:
    http://de.computers.Toshiba-Europe.com/innovation/generic/SUPPORT_PORTAL/
    find when you enter the serial number or model number is not my laptop?

    On a response, I would be very happy.

    Sorry for the bad English. My language is German!

    So I hope that someone can help me with my questions.

    With sincere friendships.

    Etem Basoglu

    > 1) in theory, SATA3 work perfectly well this SSD 240 GB right?
    > Manually, it is up to 120 GB SATA2 SSD in it. However, the 2009 manual. The information is very old. And at that time were not yet 240 GB free for end users of hard drives SSD SATA3.

    The SATA controller is not limited in size, you can use 250 GB, 500 GB or more large hard disks. The same should be possible with SSD drives since the controller is the same.

    (> 2) is there any Windows Professional / Ultimate / Business 64 for 7 as this laptop?
    > Original, I have Windows 7 Ultimate 32 bit. I wanted that my memory that expanded up to 8 GB. CAD program running on the 64-bit operating system much better.

    Don't know what you mean exactly, but if you want to installed Win 7 64 bit, then you can do without big problems the 64-bit drivers are available on the European driver Toshiba page.

    (> 3) is the card graphic and/or welded directly on my cell or can I leave replace it? It is a plug-in card?
    The laptop seems to be equipped with a NVIDIA Quadro NVS 150 M chip graphic. This is an external chip that is connected/soldered on the motherboard. But even if you can remove this chip, the upgrade is NOT possible.

    (> 4) can I switch to a processor / CPU? What size?
    http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

    Generally the CPU upgrade depends on the chipset of the motherboard.
    You could upgrade the processor, if the chipset would support the new processor.
    There are still questions about BIOS support, but I've read here in the forum that some people have been able to upgrade the new processor.

    (> 5) the Mobile UMTS and HSDPA / HSPAU / LTE is capable?
    Support for 3G modules appears to support the HSDPA standard

    (> 6) I still can't get on the Toshiba support site:
    > http://de.computers.toshiba-europe.com/innovation/generic/SUPPORT_PORTAL/
    > find when you enter the serial number or model number is not my laptop?

    Maybe it is not inserted into the database, but your Tecra S10-183 belongs to the series of PTSB3E that you can search other models belonging to the PTSB3E for details

  • Tecra S10-106 does not see the HARD drive 1000GO

    Hello

    I bought a 1000MB HARD disk and build in on a TECRA S10-106.
    The HARD drive was not identified.

    Do you have an answer why?

    Thank you for the help

    Hello

    He recognized the HARD drive in the BIOS?
    If not, then possibly the BIOS can't handle this HARD drive because of the size
    Try a 500 GB or 750 GB 2.5 HDD

  • Tecra S10-I can't boot from the battery alone

    Hello

    I replaced my laptop battery and once I installed the battery pack with a compatible battery Toshiba-no, that my laptop won't start not from the battery alone (Tecra S10-114) after starting was performed by the power adapter (without fixing the battery), I installed it and the OS (WIN7 Professional) recognize and recharge the battery regularly.

    I can unplug the AC and the laptop works fine until there is enough battery power. Battery plug is almost the same as the original (5100mAh - 1BRS PA3588U 10.8V) - 10.8V 5200mAh replacement battery Toshiba PA3588U-1BRS PA3356U, etc..

    Can you help me understand why he has just this problem starting and the rest works well?
    You have a solution?

    Thank you
    Luca

    > I replaced my laptop battery and once I installed the pack of battery with a compatible battery Toshiba not my laptop does not start from the battery alone

    Maybe you should use a Toshiba original battery.
    Get in touch with Toshiba ASP in your country that could send you an original and right part that is compatible with the laptop.

Maybe you are looking for