Wireless C4580 printer connect to laptop without a router, have problems.

Similar Questions

• When I try to connect with my wireless laptop will connect only to Local access. If I connect the laptop to the router with the ethernet cable, it works very well.

  VIsta - Local access only

  HI -.
  I recently moved.   I use the same router from my old apartment and I had no problem connection in the past.   Since I moved I have a new Time Warner modem (Cisco) and the modem works fine.

  The router also works very well I'm able to connect with my iPhone and IPad without any problem.

  But when I try to connect with my wireless laptop, it will only connect to Local access.    If I connect the laptop to the router with the ethernet cable, it works very well.

  It's a Dell Studio 15 with Vista.

  The computer is able to connect to wifi to other places without any problem, but for some reason that I can't connect home.   I tried to reset the modem and the router several times, but that did not help.   I tried the option repair & diagnose several times but it doesn't work.

  I tried to look for other solutions online and tried to disable IPv6, and while it helped some and I was able to connect wireless, the computer ran so slowly that it didn't seem like a good solution.

  This has been very frustrating.   Thanks in advance for any help or suggestion.
  Staci

  Hello Staciusa,

  Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the internet connection:

  Take a look at step 6 in this article that give more details about it:

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx

  If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider.

• How can you connect a printer to a laptop without cd-rom access Tablet

  How can I connect Canon MX472 printer for a Tablet laptop without cd-rom access?

  You can download all the software here:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx472#Dr...

• Setting up a Photosmart c4580 HP laptop without a router wireless...

  Hello

  I bought one for features wireless Photosmart c4580 because we are on the road a lot, but I can't seem to set up.

  I have a broadband connection to the usb Pantech Verizon for internet and I guess it does not recognize that.

  How would I go all setting this up with my HP dv7 laptop with Vista 64 without router?

  I use Norton Internet security. Don't know what the hell I do

  Thanks for the help ():

  Hello

  Thank you for your time to answer me. I appreciate it. I couldn't get your solution to work, as I posted in another forum, someone helped me and it put in place immediately. Maybe because I have Vista instead of XP or most probably I don't know what I'm doing.

  Here is the solution on this forum:

  http://h30434.www3.HP.com/PSG/board/message?board.ID=networking&message.ID=2724#M2724

  Yet once, thank you very much for answering my question, I appreciate your time and effort.

  Sincerely, Jan

• Wireless connection from laptop to mobile route access

  I tried to connect my Internet to my laptop HP Sony X 10 mobile via wifi wireless.

  After that I created the wifi profile I can't find wifi on my mobile search and found the list name.

  My laptop computer adapter works correctly and configured. My mobile also search other networks wifi with no problems.

  Help me please to connect n mobile laptop

  Thank you

  Hi Chris,

  Thanks for posting your question in the Microsoft community.

  I understand that you want to connect your Sony phone to your Windows 7 computer, wireless. Let us know if this interpretation is erroneous.

  There is an article in the knowledge base that provides methods detailed on how to connect a device to your computer Windows 7 wireless, I suggest that you visit the link and try the methods.

  Connect to Bluetooth and other wireless or network devices

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Let us know if you need more assistance.

• HP deskjet1055: how to install the printer to a laptop without cd

  Hi, I'm trying to install my printer hp deskjet 1055 to my new laptop hp windows 8? Can someone help me please, I do not have the cd.

  Thank you very much!  :-)

• I am not able to install my printer on my laptop Asus. I have the Hp OfficeJet 4500.

  I have a Hp OfficeJet 4500

  Try to install first the next update:

  • AMD C-50
  • : ftp://ftp.hp.com/pub/softlib/software12/COL40390/oj-98352-1/HPAMDC50PATCH.exe

  2. when the installation window appears, click the OK button:

  • 

  3. restart the computer.

  4. try to reinstall the software for Officejet 4500.

  .... And now, you will be able to install your impression in the Asus laptop.

  * Click the stars KUDOS to say thanks

  * also click on the Solution button if your question is answered.

• laptop to wireless printer connectivity

  I have a locked box truck in which I want to set up a wireless network between my laptop and a wireless printer. My laptop has internet connectivity via an aircard card. A basic router will solve my problem? There is no modem, only the laptop and printer wireless, in which I want to connect wireless. Any help appreciated.

  Thank you

  You don't need a router for that.

  Without a router, you can create a wireless ad - hoc between the laptop and the printer.  See, for example, http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c00205926

  Many successes of Google more

  The security problem is that XP does support (easily hacked) WEP encryption in wireless ad-hoc mode. On the other hand, nobody's going very far from trying to connect to your printer. Just make sure you don't leave the laptop to active ad hoc wireless network when you are not printing.

  If you get an inexpensive wireless router, you can connect the laptop to the router by an Ethernet cable or wireless.  In this configuration, you will be able to use wireless more secure (WPA or WPA2) security that supports the link (computer or printer).

  In both cases, do not install (or disable) sharing files and printers for Microsoft Networks in the properties of the network card on the laptop.

  Of course, the three devices, only the laptop is likely to be able to operate without available 110vac, you will need to buy some sort of power supply to convert the truck 12VCC power.  Make sure that you add the requirements of power of the appliances that you will probably use in order to get a converter with a sufficient capacity.  I don't have any specific recommendations, but I don't tell you want it a little and do not go for the cheaper product.

• can I print from a laptop if wireless printers hooked to office without card wierless?

  I have my printer HP Deskjet hooked to my office, is there a way I can print from my laptop without wireless card?

  Thank you, you are welcome.

  Frank

• configured printer / connection

  I just bought a hp - Laserjet pro m1536dnf (HP) printer, that has no connectivity wireless.

  Currently, I use a (WR) wireless router to access the internet at home.

  Q1: Can I use a network cable to connect my printer the WR, without using the usb cable provided in the box to connect the printer directly to my laptop and print documents?

  Assuming that the answer to Q1 is Yes, I want to better understand:

  Q2: while the WR transmit internet (wireless) signal to my laptop, the WR will also transmit printer signal to my laptop? This is why I am able to print from my laptop without direct connection to usb cable from my laptop to the printer?

  Hello

  Connect the printer via a wired ethernet cable or wireless makes no difference.

  As long as the computer and the printer connected to the same network (an any of them can be connected either wired or wireless) you can install the printer on the PC and enjoy its functionality.

  Kind regards

  Shlomi

• Iomega ix2 200 direct access by ethernet without a router

  How to access the ix2 200 via ethernet to the laptop without a router? I tried with a DHCP server. It is assigned an ip address for laptops and 200 IX2. but when ping destination host could not be reached pop message up.packets sent 4, received 4 Can anyone help? assigned ip address 169.254.0.2 for ix2 200, 169.254.0.3 laptop.

  Your suggestion does not solve the problem. But I saw the NAS via router initially and then set a fixed ip address for the NAS in the settings. OK now.

• Unable to connect my laptop to the new wireless printer - error "installation failed" after entering my password/security key (WPA)

  I just bought an Epson printer. I went through the installation process on my laptop but I get the "Failed to install" error message after entering my password/security key (WPA). I am with BT and my home hub I have "Wireless Key", "PIN WPS wireless" and "Admin password" - which is it? I tried all three and not joy. Help!

  It is almost certainly looking for your "wireless key".

  The WPS Pin is only used if the printer supports "Wi - Fi Protected Setup" - which it probably isn't, and the "Admin" password is used to access your BT home hub to make configuration changes.

  In addition to identifying what wireless Epson printer you have, you can either

  • b changes to the configuration of the printer from a screen on the front or
  • (b) to connect to the printer by an Ethernet cable or
  • (c) to connect to the printer with a USB cable?

• How to get my printer connected to my laptop wireless

  I'm trying to get my printer wireless connected to my laptop.  I clicked on "Add a printer" and then when the next screen poplulates with all models of printer, I clicked on HP.  When I go and try to find my printer model # (Photosmart Plus B210 series) I find that this model does not appear in the list.  How can I get my printer connected to my laptop?

  See this:

  http://h10032.www1.HP.com/CTG/manual/c02456532.PDF

  It's under the connectivity

• I get an error message when I want to print from my laptop on my Lexmart printer wireless. It is said "problems connecting to the printer.

  original title: devmgmt msc

  I get an error message when I want to print from my laptop on my Lexmart printer wireless. It says "connection to the printer problems" sometimes he just complained and then prints, sometimes it won't print at all. I hate the thing!

  Hello

  I suggest you to see link below and check if it helps.

  http://www.Lexmark.fr/publications/pdfs/810/winug/Eng/UGnetwk.html

  I suggest also you see the steps from the article below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

• Lexmark wireless printer connects to the Acer laptop.

  My printer lexmark series 400 and Motorolla phone Wireless will not connect to my laptop w/mic adapter to Acer4520,

  can someone advise?

  What happens when you try? Lexmark support say?