Wireless card doesn't work on HP G5370uk

Similar Questions

• Wireless card doesn't work after Windows Update

  I have a Compaq Presario F730US with Vista. I have installed Windows Mobile Device Center on it, and the computer has stopped recognizing wireless card. Then, after trying to restore the original drivers and do several other things, I have done restore the computer originally installed at the factory.  The wireless worked well.  However, as soon as I updated all Microsoft Updates and before installing Windows Mobile Device, the wireless card no longer works again.  I restored the drivers, and it worked the first time.  Then a few other updates came through, and I can't get working again.  Any suggestions?  It's a Broadcom Wireless card. I saw that a gentleman has been upgraded for its presario to Windows 7 and had the same problem on another post and never had resolution.

  The normal rule is to never accept update from Windows update device driver.

  Always bring the manufacturer.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

  Change the Update Auto Update settings for ' check for updates but let me choose etc "> OK".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• HP Pavilion 9500: Supported wireless card doesn't work is not in Windows 10

  I just bought a new card WiFi Intel Centrino Ultimate-N 6300 to my PC HP Pavilion 9500/entertainment because the original a (WiFi Link 4965AGN) is no longer supported on Windows 10. I have the Driver IRQL NOT LESS or EQUAL (Netwlv.64.sys) BSOD a few times a day.  According to Intel, the Ultimate_N 6500 is a supported card, but once I installed it, it will fail to start; He told me that my network card is not taken in charge and remove it please.

  Here, any help would be greatly appreciated!

  Thank you!!

  Then, you will need to return the o/s supported to ensure that the equipment works as I have said, you use what works for her, not what you want. What you want and what works are the two different side of the same coin.

  I guess the easy option would be the easiest route to take. I wasn't going for simple, I expected a little more creative way to solve this problem; workaround to allow W10 supports my original legacy wireless card or a way to remove the restrictions on the white list by HP to enable my new card.   It seems that this is not the right forum for this.

• Edge 15 0319 - 26u wireless card doesn't work!

  I reinstalled Windows 7 Professional and that you have installed more updates.  Unable to get up and running wireless card.  I installed several drivers for the card from the website of lenovo, but without success!  My laptop is useless for me wireless!

  Thanks for the reply but I found the solution.  I did some research and found that if I installed this driver http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014964, which does not appear on my downloads page machines, the wireless lan device works correctly.  I don't know if it's the right driver, but it is the only driver I have my wireless nic to work.  Thanks for the help!  Cheers!

• Equium L40 - 10 X. Wireless card doesn't work anymore.

  Wireless works OK then suddenly stopped. Tried to restore windows etc. WLAN card is no longer lights up. F8 has no effect. Wireless network card is no longer listed in Device Manager.

  This seems to be the same problem reported by another use the same forum

  Any suggestions what to try next? Any help much appreciated...

  Hi Ian

  Thanks for this info.
  From time to time my WLan don't work properly.
  Usually the laptop WLan should automatically connect after the machine started upward.
  But sometimes it does not connect.

  In my case, the solution was simply;
  I update the list of available WLan s in order to establish the WiFi connection.
  In most cases, it helps.

• Wireless card no longer works on Equium l20-197

  Hello

  Initially, I posted the problem I have on the US site, I didn't know that there was a site for europe.
  The long and short of it is my wireless card no longer works
  Here are the details on the hyperlink below and solutions of attempts, none works so far

  http://forums.Toshiba.com/T5/networking-Wi-Fi/wireless-problem/m-p/158046/highlight/false#M9476

  If someone can add something?

  Thanks in advance
  Kevin

  Hello

  According to the post in the US forum, the WLan card is not visible in the device under network adapters Manager. Right?
  You can see an unknown peripheral or Ethernet controller in Device Manager?

  If so, then check this Toshiba HowTo identify the unknown device:
  [How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78]

  If you don t have any unknown devices and if the WLan card still isn't in the list, then I guess the WiFi chip is defective.

  In this case I recommend using a solution just as the use of external USB WLAN.

• Recent update caused the wireless card no longer works. After a restore of the internet system works.

  27 or 28 September 2010, a series of updates was installed automatically on my new Sony Vaio with Windows 7. I just bought the computer a week and half ago. After this series of updates has been installed, the wireless card would be the interface is no longer with the router. When I did a restore system before the update was installed, the internet worked. I left the computer load updates again - today, October 2, and again the wireless card would not work with the router. I removed the updates and the work of the internet. Please notify. I travel a lot and must be able to work online wireless.

  Hello

  1. what updates are?

  2. what exactly happens when you try to go online after installing updates?

  3. what operating system do you use?

  Please answer these questions, that could help us help you better.

  The next time that you install these updates, please check for red or yellow bangs inDevice Manager and send back the same.

  Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:
   
  a. click Start.
  (b) in the search box type eventvwr.msc , and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer 
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  The articles above can also be used on windows vista.

  Also take a look on the underside of the articles that might help you.
  Why can't I connect to the Internet?

  Using the troubleshooter from network in Windows 7

  Network convenience stores

  Use Network Troubleshooter event logs to solve network problems

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Your wireless card has stopped working properly.

  Often, I receive this message "problem reports and solution:
  A problem with your wireless network card

  Your wireless card has stopped working properly.
  There is a network adapter that allows your computer to connect to a wireless network.
  To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer.

  Even if I get this message that I am able to connect to wireless internet. I checked on the DELL website, and according to them, I have the driver for my Inspiron 1520 then I would like to know how I can stop this annoying message that appear all the time? Is there an updated driver that I don't know?
  The problem refers to my Dell Wireless 1390 WLAN Mini-Card (Driver version 4.170.25.17)

  I would be grateful for any advice.
  Thanks in advance.

  Hi dtw1970,

  While I was researching online error message met that it is a known issue on dell computers and there are a few steps available in the dell Web site.

  Check the link and try the steps mentioned below.
  http://en.community.Dell.com/forums/p/19094058/19217044.aspx#19217044

  You can also try posting your query in the Dell Community, see the link below.
  http://en.community.Dell.com/

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP TS wireless card doesn't say not work - but store connect it?

  I have a HP Pavilion while a 23-p030na who cannot connect wirelessly.  As I work for an ISP, I made a full wireless troubleshoot on the PC before I even contacted HP.  Adapter is BROADCOM 802.11 A/G/N (2 x 2) following were considered:

  Change setting channel router (other devices connected wirelessly fine btw) bars of signal strength 5 - other available connections can be seen

  Unplug all devices connected wirelessly (if IP address conflict)

  Assign IP/DNS settings

  Restore the Auto IP/DNS

  Remove security in the router, so connection to unsecured

  Toggle adapter

  Try to connect with FON Wifi BT

  Move the PC in another room

  Update driver

  Uninstall and reinstall the driver

  Put your PC back to factory settings

  This time NO fact at all ethernet connection and attempt to connect with wireless ONLY as part of the Set Up

  HP asked me to reinstall the wireless card, but denied that this would invalidate my store warranty

  So everything I tried, failed.  So how is it when I take it back to the store I bought, he managed to connect immediately to their store in wireless?  I was sent home and said that the problem is mine - I even checked the adapter Windows log to make sure that he had REALLY connected the adapter and it showed link - success and listed the sites that he traveled.

  Now I must be missing something or a trick has been played.  Could he have used a connection that is bridged and then deleted out of networks later? Don't know.

  If you think that there is something that I have not tried, please let me know because I'm all ideas now. Thank you very much.

  If the store has been able to connect and you cannot, the problem may be with your router.  Have you reset the default router or do a hard reset.

  You can also try the site troubleshooting tips, win 8 is basically the same.

  http://support.HP.com/us-en/document/c02543015

  or this

  http://support.HP.com/us-en/document/c03314764

• HP 14-r206nv: light wireless led doesn't work do not

  I have a very minor issue that don't mind operating of the laptop, but I'm curious to know why it does not work, because I know that before reinstalling windows it worked normally.

  Well well, to the point now. After a hard drive failure and replacement, Windows 8.1 are installed again and each driver has been installed and works well. The only thing that doesn't work is the led light button wireless (F12). The button is working correctly, activation and deactivation of the Wi - fi, but not the led. It lights, neither white nor red, it is always disabled.

  The model of the wireless card is Realtek RTL8723BE.

  I installed the drivers from the HP site.

  Version of the driver for the wireless card is 2013.8.915.2014

  The version of the wireless button driver is 1.1.7.1

  I tried the latest drivers for the card (an optional windows updates finds) implemented to date for this and the wireless button (if I try update driver in Device Manager, it installs a new) but nothing has changed for good so I decided to go back to what the official site suggests and post here.

  Hi @v1184,

  Thank you for your inquiry.

  I understand that you had a hard drive failure and he had to be replaced, you did. You reinstalled Windows 8.1 and all drivers are up to date.  The only problem you are having is that the wireless button light does not illuminate, but it does not work.

  You tried to update the wireless driver button, but has not changed, so you returned back to the recommended HP driver.  As the wireless button does not work it is not the driver, however, it could be that the light burned. The other possibility would be that when you replaced the hard drive, the connection has been dislodged or disconnected and must be reconnected.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on ' Thumbs Up ' below is a great way to say thank you!

• Satellite Pro 4600 Wireless card does not work with WIN2K?

  I have a Satellite Pro 4600 with UK dealer PA3070U-1MPC wireless operating with Windows 2000 card

  The wireless client Manager detects the network from my wireless router and the signal is excellent and I see all the Green swhowing bars.

  But I can't mske a connection in 'connections' wireless says "network cable is disconnected.

  the router works well with other laptops in my house.

  I have the latest version of Win2K also downloaded and installed the latest versions of client manager and WLAN driver for win2k to the toshiba Web site.

  'Support of toshiba in Turkey' told me ' I need another driver for Win2K for my driver wireless card cause win2K on the toshiba site isn't for "thie" wireless card ". I have been waiting for this for 3 weeks now and couldn't join the UK level 3 elusive support who supposed to have this driver. I saw on the internet is the same wireless card was sold as an accessory "made by toshiba" and he said that it is compatible with Wim2K

  What I then please? It works with Win2K, is it "another driver" and so on?

  Thank you

  Hello

  I don t think that there is something wrong with the driver because you can receive signals from router (green bars). If the driver WLan would be a mistake if wouldn t receive all signals.
  Please check device manager. If the wireless card is recognized if you are using the correct driver and the driver has been installed correctly.
  Please see this page:
  http://209.167.114.38/support/TechSupport/TSBs/all/-TSB000705.htm

  In my view, the message "network cable is disconnected" appears because your (NOT wireless) LAN cable is not connected. This post has nothing to do with the question of Wlan.
  You should check your WLan settings again.

• Intel pro wireless 2200BG doesn't work

  I installed an Intel pro wireless 2200BG mini PCI card on my Satellite 1900-303, everything looks OK, but it says hardware turn off switch is on but the led remains off and the Wireless does not work

  Hello

  Have you checked the State in Device Manager? There is a yellow question mark? If there is no problem with the right mouse button you can activate it.

  If there is no green light try anyway to make connection and check the functionality of the wireless card. Perhaps is the lack of green light.

• Atheros AR9285 802.11 wireless card does not work.

  Wireless for my laptop HP that atheros AR9285 recently stopped detecting my router while I have my Netgear G54 WGR614v10 encryption card any type of security, I chose, but it detects my router if I switch off my encryption.

  I read a post from Paul_Tikkanen Atheros WLAN Driver corrects connection issues with many new routers (Linksys, Netgear, D-Link, etc.), I downloaded the driver and installed it but it has not made a difference.

  I also watched to make sure that bluetooth was not on, I read somewhere that it might interfere with my wireless card, but it was not on.

  Any help would be greatly appreciated!  Thank you

  Windows 7

  OK, this is strange, and then we will have to check each setting security on your router and your network card to make sure they match. Access your routers webpage bios and go to network security, if possible on your PC to cable and take note of the security settings and compare them with the security of network adapter settings.
  
  ~ Bios of router ~
  * Usually, which would be the mode key staff/Enterprise wpa or wep.
  * Then check that your type of encryption on the router security example would be AES or TKIP.
  * And then check your 802.11 mode.
  
  ~ NIC ~.
  * go to start button or charms right mouse click Select Network option and click. * highlight of the WiFi adapter which is having right mouse questions click.
  * then choose status to the next screen, click Properties wireless.
  * then select Security tab, try this on your laptop which works as well to make sure everything fits.
  
  Something must have went wrong with the installation of the driver. I think you need to remove or back the driver, restart your laptop and let windows update or HP support assistant app find the right driver for you if it does not.

• my wireless card no longer works...

  randomly using my computer my card wireless NETWORK has stopped working. I checked, and for some reason any the pilot only are there no more. tried to reinstall that driver for my realtek wireless card, still did not work. site HP Web to find what drivers I might miss even tried, and it came with nothing. I cannot turn it on anyway, can't find it anywhere except my device manager and, even then, it gives me no details on this at all. I don't know what else to try, or why she would randomly doing this. I scanned for virus, nothing came. and I made sure the NETWORK card has been activated in all ways I might be able to turn it on.

  Electrical components sometimes must have all the food sources removed and reintroduced to work properly.  Try to perform a hard reset first, if this does not work then we will move on to the next step.

  To perform a hard reset

  • Shut down the computer by going to the menu start and select shut down. (If you have no display, hold the button for 5 seconds); (if the computer don't market, go to the next step)
  • Unplug the adapter from the laptop.
  • Remove the battery from the bottom of the laptop.  There will be a switch/battery eject button.
  • Wait at least 1 minute with all sources of power disconnected.
  • Reinsert the battery and reconnect the power adapter, and then try to turn on the laptop.

• Lenovo X61T: (Intel WiFi Link 4695AGN) wireless adapter doesn't work!

  Hey guys,.

  I have been a user of X61T (tablet) for over 2 years now and have never had problems of WiFi connection, either. I've upgraded to Windows 7 last year and things have only improved.

  Today, however, after the uninstall of a program called "Connectify" that basically turns your laptop into a WiFi hotspot, my wireless Radio JUST doesn't work! My wireless Radio switch (it's at the front) is on (I pushed to the right). Until yesterday, it was working great. I even used my wireless network to create a hotspot WiFi using Coonectify. I also removed from Connectify because it did not work. And then I just uninstall Connectify because I don't see an interest in the creation of a hotspot, when I have a wireless router at home. I restarted my PC and her Viola - wireless RADIO WAS DEAD! I do not see the Green LED for WiFi on the far left will blink more. Gone!

  Went to Device Manager, and I see no problem with the device of 4695 Intel WiFi Link driver. Again, I uninstalled and downloaded the newest one. STILL DOES NOT!

  I checked the records to see if I can find all the entries of Connectify which may cause the problem, but Nada! Nothing there too! I feel fairly pessimistic because I got a new wireless router yesterday NETGEAR N-150 and even not 24 hours later, I'm back using the ETHERNET cable.

  I would really appreciate if someone can help me here! Thank you.

  GINORMOUS EXCUSES!
  Re-installed the device driver and the problem disappeared!

  PS, I hope that my post was in the less entertaining... I feel that sheepish now!