my wireless card no longer works...

Similar Questions

• Wireless card no longer works on Equium l20-197

  Hello

  Initially, I posted the problem I have on the US site, I didn't know that there was a site for europe.
  The long and short of it is my wireless card no longer works
  Here are the details on the hyperlink below and solutions of attempts, none works so far

  http://forums.Toshiba.com/T5/networking-Wi-Fi/wireless-problem/m-p/158046/highlight/false#M9476

  If someone can add something?

  Thanks in advance
  Kevin

  Hello

  According to the post in the US forum, the WLan card is not visible in the device under network adapters Manager. Right?
  You can see an unknown peripheral or Ethernet controller in Device Manager?

  If so, then check this Toshiba HowTo identify the unknown device:
  [How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78]

  If you don t have any unknown devices and if the WLan card still isn't in the list, then I guess the WiFi chip is defective.

  In this case I recommend using a solution just as the use of external USB WLAN.

• Recent update caused the wireless card no longer works. After a restore of the internet system works.

  27 or 28 September 2010, a series of updates was installed automatically on my new Sony Vaio with Windows 7. I just bought the computer a week and half ago. After this series of updates has been installed, the wireless card would be the interface is no longer with the router. When I did a restore system before the update was installed, the internet worked. I left the computer load updates again - today, October 2, and again the wireless card would not work with the router. I removed the updates and the work of the internet. Please notify. I travel a lot and must be able to work online wireless.

  Hello

  1. what updates are?

  2. what exactly happens when you try to go online after installing updates?

  3. what operating system do you use?

  Please answer these questions, that could help us help you better.

  The next time that you install these updates, please check for red or yellow bangs inDevice Manager and send back the same.

  Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:
   
  a. click Start.
  (b) in the search box type eventvwr.msc , and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer 
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  The articles above can also be used on windows vista.

  Also take a look on the underside of the articles that might help you.
  Why can't I connect to the Internet?

  Using the troubleshooter from network in Windows 7

  Network convenience stores

  Use Network Troubleshooter event logs to solve network problems

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Satellite C660D - after update BIOS wireless card no longer works

  Hello
  Yesterday I Tempro message asking me to do an update to the BIOS: 'bios-20120601184846. I did but it was not reinstalled the wireless driver, and since my computer can't find any wi - fi network. I still have a working ethernet connection.

  I tried several ways to fix it and nobody has succeeded:
  -J' installed the driver "slate-driver-s1081-win7-wlan-1005.31.1222.2011".
  -J' installed from the toshiba Web site, the driver "realtek_wlan_win7_2000016L_20110523".
  -J' tried a system restore, but he made a mistake and did not work

  How can - I'm restoring my wi - fi connection?
  Thanks for your help.

  Technical information:
  Model: Satellite C660D - 104 Ref: PSC1YE-00Q001FR serial number: 3B097607K
  Wi - fi card: Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC #2
  Windows 7 64 bit

  PS: Sorry if I don't speak very well, I'm not English.

  Hello

  This means the card WLAN is not listed in Device Manager?
  Some unknown device is listed in Device Manager?

  To be honest, this issue is not known to me but if it please try to set the BIOS to default settings and check again.
  I put t know if this will help but you can back up all your data and install again recovery image to check if the same problem persists with the factory settings.

• Wireless card doesn't work after Windows Update

  I have a Compaq Presario F730US with Vista. I have installed Windows Mobile Device Center on it, and the computer has stopped recognizing wireless card. Then, after trying to restore the original drivers and do several other things, I have done restore the computer originally installed at the factory.  The wireless worked well.  However, as soon as I updated all Microsoft Updates and before installing Windows Mobile Device, the wireless card no longer works again.  I restored the drivers, and it worked the first time.  Then a few other updates came through, and I can't get working again.  Any suggestions?  It's a Broadcom Wireless card. I saw that a gentleman has been upgraded for its presario to Windows 7 and had the same problem on another post and never had resolution.

  The normal rule is to never accept update from Windows update device driver.

  Always bring the manufacturer.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

  Change the Update Auto Update settings for ' check for updates but let me choose etc "> OK".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite 2410-404: mini pc card no longer works

  Hello

  I have a Satellite 2410-404 with mini pc installed wireless lan card, allowing to work perfectly - up to a few days ago, I installed a pcmcia by levelone wireless network card, just to check if it worked. This was the case, and so I uninstalled the card and the software that came with it. But now my toshiba mini wlan card no longer works! It is actually recognized and installed by the system and shown as being active - but I do not get a connection to wifi even when there is certainly one around. I can't even bring up the list of WLAN networks available (win xp) that normally you can even if there's no matter what available wlan.

  I checked the registry and found several remaining entries by levelone... but dare not change or delete since I'm not an expert at all regarding registry stuff. Another thing that bothers me is that when I uninstall the mini pc card and let windows reinstall, it shows as "3 wireless" or even "WiFi 4", which seems to allude to some "connection 2" still occupied by some zombie levelone wireless.

  I would appreciate any help on this matter,

  TIA
  Rainer

  Hi Rainer

  As you can see all the software, after removing, let a few entries in the registry. In my opinion, you should remove the list of Device Manager wireless card and wireless connections. Restart the device and the wireless card should be recognized and installed again.

  The wireless connection you can configure with option of windows. If you use another client to the wireless Wi - Fi disable windows configuration.

• Satellite A210-1AP - video card no longer works play Call Of Duty 4

  Hello

  I have problems with my video card.
  When I was playing call of duty 4 5 minutes from my video card stops work and the restart of the screen.

  Then he said: your video card no longer works and the problem solved.
  My graphics card is ATI Mobility Radeon HD 2600.

  > Then he said: your video card no longer works and the problem solved.
  And? It works now?

  Eventually the driver graphic hanging and that's why you have received this message.
  It is also possible that the temperature of the GPU was too high and therefore the message appeared.
  The COC 4 needs a lot of material resources and everything should run with maximum performance! Therefore, there are more high heat dissipation and this can lead to problems of graphics card.

• Keyboard and wireless mouse no longer works

  my keyboard is msi star type ES500W. Computer... top of wind msi ZE2010. After changing the batteries in the keyboard and mouse wireless, they no longer work. The computer says that they are beautiful, but they don't work! I'm not computer savy so please talk to me as tho I'm in kindergarten. Thank you

  Hi Louise,.

  1. you receive messages or error codes?

  2. did you of recent changes on the system?

  3. what version of Windows are you using?

  Perform the following methods and check if it helps.

  Method 1:

  Try to connect the keyboard and mouse to any other computer / or any other port and check if it works very well.

  Method 2:

  You can try to run the hardware troubleshooter and check if it helps.

  Convenience hardware store

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 3:

  You can also try to update the drivers for the keyboard and mouse.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Method 4:

  You can also try to synchronize the device with the receiver again. Then try to reinsert the batteries. Also, look for the interference of signal from nearby electronic devices.

  Hope this information is useful.

• Your wireless card has stopped working properly.

  Often, I receive this message "problem reports and solution:
  A problem with your wireless network card

  Your wireless card has stopped working properly.
  There is a network adapter that allows your computer to connect to a wireless network.
  To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer.

  Even if I get this message that I am able to connect to wireless internet. I checked on the DELL website, and according to them, I have the driver for my Inspiron 1520 then I would like to know how I can stop this annoying message that appear all the time? Is there an updated driver that I don't know?
  The problem refers to my Dell Wireless 1390 WLAN Mini-Card (Driver version 4.170.25.17)

  I would be grateful for any advice.
  Thanks in advance.

  Hi dtw1970,

  While I was researching online error message met that it is a known issue on dell computers and there are a few steps available in the dell Web site.

  Check the link and try the steps mentioned below.
  http://en.community.Dell.com/forums/p/19094058/19217044.aspx#19217044

  You can also try posting your query in the Dell Community, see the link below.
  http://en.community.Dell.com/

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft wireless mouse no longer works on Inspiron 8200

  Our Microsoft Wireless mouse no longer works on our Inspiron 8200. We have a red light on the mouse so it's on and we just changed the battery in the mouse. The computer no longer recognizes the mouse. Before his stoppage of work completely computer did not come out of standby/hibernation mode correctly. He had to press the power button rather than wake up it with the mouse.

  Now that I have attached a wired mouse, he wakes up as it should with the movement of the mouse or a key.

  Do you by chance have a solution that I can download?

  Thank you.

  SheilaMc

  
  

• HP Pavilion 9500: Supported wireless card doesn't work is not in Windows 10

  I just bought a new card WiFi Intel Centrino Ultimate-N 6300 to my PC HP Pavilion 9500/entertainment because the original a (WiFi Link 4965AGN) is no longer supported on Windows 10. I have the Driver IRQL NOT LESS or EQUAL (Netwlv.64.sys) BSOD a few times a day.  According to Intel, the Ultimate_N 6500 is a supported card, but once I installed it, it will fail to start; He told me that my network card is not taken in charge and remove it please.

  Here, any help would be greatly appreciated!

  Thank you!!

  Then, you will need to return the o/s supported to ensure that the equipment works as I have said, you use what works for her, not what you want. What you want and what works are the two different side of the same coin.

  I guess the easy option would be the easiest route to take. I wasn't going for simple, I expected a little more creative way to solve this problem; workaround to allow W10 supports my original legacy wireless card or a way to remove the restrictions on the white list by HP to enable my new card.   It seems that this is not the right forum for this.

• Satellite Pro 4600 Wireless card does not work with WIN2K?

  I have a Satellite Pro 4600 with UK dealer PA3070U-1MPC wireless operating with Windows 2000 card

  The wireless client Manager detects the network from my wireless router and the signal is excellent and I see all the Green swhowing bars.

  But I can't mske a connection in 'connections' wireless says "network cable is disconnected.

  the router works well with other laptops in my house.

  I have the latest version of Win2K also downloaded and installed the latest versions of client manager and WLAN driver for win2k to the toshiba Web site.

  'Support of toshiba in Turkey' told me ' I need another driver for Win2K for my driver wireless card cause win2K on the toshiba site isn't for "thie" wireless card ". I have been waiting for this for 3 weeks now and couldn't join the UK level 3 elusive support who supposed to have this driver. I saw on the internet is the same wireless card was sold as an accessory "made by toshiba" and he said that it is compatible with Wim2K

  What I then please? It works with Win2K, is it "another driver" and so on?

  Thank you

  Hello

  I don t think that there is something wrong with the driver because you can receive signals from router (green bars). If the driver WLan would be a mistake if wouldn t receive all signals.
  Please check device manager. If the wireless card is recognized if you are using the correct driver and the driver has been installed correctly.
  Please see this page:
  http://209.167.114.38/support/TechSupport/TSBs/all/-TSB000705.htm

  In my view, the message "network cable is disconnected" appears because your (NOT wireless) LAN cable is not connected. This post has nothing to do with the question of Wlan.
  You should check your WLan settings again.

• Atheros AR9285 802.11 wireless card does not work.

  Wireless for my laptop HP that atheros AR9285 recently stopped detecting my router while I have my Netgear G54 WGR614v10 encryption card any type of security, I chose, but it detects my router if I switch off my encryption.

  I read a post from Paul_Tikkanen Atheros WLAN Driver corrects connection issues with many new routers (Linksys, Netgear, D-Link, etc.), I downloaded the driver and installed it but it has not made a difference.

  I also watched to make sure that bluetooth was not on, I read somewhere that it might interfere with my wireless card, but it was not on.

  Any help would be greatly appreciated!  Thank you

  Windows 7

  OK, this is strange, and then we will have to check each setting security on your router and your network card to make sure they match. Access your routers webpage bios and go to network security, if possible on your PC to cable and take note of the security settings and compare them with the security of network adapter settings.
  
  ~ Bios of router ~
  * Usually, which would be the mode key staff/Enterprise wpa or wep.
  * Then check that your type of encryption on the router security example would be AES or TKIP.
  * And then check your 802.11 mode.
  
  ~ NIC ~.
  * go to start button or charms right mouse click Select Network option and click. * highlight of the WiFi adapter which is having right mouse questions click.
  * then choose status to the next screen, click Properties wireless.
  * then select Security tab, try this on your laptop which works as well to make sure everything fits.
  
  Something must have went wrong with the installation of the driver. I think you need to remove or back the driver, restart your laptop and let windows update or HP support assistant app find the right driver for you if it does not.

• Edge 15 0319 - 26u wireless card doesn't work!

  I reinstalled Windows 7 Professional and that you have installed more updates.  Unable to get up and running wireless card.  I installed several drivers for the card from the website of lenovo, but without success!  My laptop is useless for me wireless!

  Thanks for the reply but I found the solution.  I did some research and found that if I installed this driver http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014964, which does not appear on my downloads page machines, the wireless lan device works correctly.  I don't know if it's the right driver, but it is the only driver I have my wireless nic to work.  Thanks for the help!  Cheers!

• Satellite A100 PSAANE - Flash card no longer works

  Hi all

  I have the following problem. Sometimes when I start my laptop I get the following message.
  Toshiba flash Cards has stopped working and I can't do anything else but to restart my laptop.

  Can someone help me solve this problem cause it gets very boring!

  Thank you
  Nadia

  I agree with Akuma. Remove value added package and install latest pre-installed support Toshiba and download page - http://eu.computers.toshiba-europe.com > support & downloads.