Wireless connection drops and reconnects to the games only?

Similar Questions

• How to monitor connections dropped and rejected on the PIX Firewall / ASA?

  I need to monitor the SNMP OID of the connections dropped and rejected on the PIX and ASA firewalls. Is this possible?

  If this is the case, what SNMP OID should I monitor?

  Syslogs and Netflow (introduced in version 8.2) are your options.

  No MIB can give you the numbers of conn.

  PK

• Hidden Chronicles connect problem and blocking during the game. How to fix

  When I try to start the game it constantly restarts itself, and even if I hit play, it keeps restarting.  Also when I'm looking for the hidden tracks, the computer locks and I have to restart my computer because there is no way to exit the game to restart.  Please send a reply.

  Try the game support

  http://support.Zynga.com/CP_LandingPage_WebFull?custlayoutid=1&GameID=1031&layout=WebFull&layouttmpl=Tmpl_WebFull_1

• Wireless connection dropping on the Satellite C660-195

  Hello

  I recently bought a new Toshiba Satellite C660-195.
  However, I have problems with the wireless connection. When I bought the laptop, it was full of all the annoying and resource hungry programs Toshiba install there. I have reinstalled Windows on the laptop, just install the drivers and software, I wanted and needed. I have problems with the wireless to stay connected. I can detect wireless networks and connect to that I want to be on, I have to add is a connection at home (I'm not fly: P).

  However, the continuous wireless connection down, becoming 'limited' as it says in system tray icon but then turns back on and the process just keeps spiraling on, on and off.

  The wireless I connect works quite well using Xbox consoles, at first I thought it might be the router but after that a second thought if found the wireless on the Xbox is fine then I surely can't be the case? The laptop is Windows 7 64 bit

  Thank you

  Luke

  I wish people would read all the postings first before creating always new posts on the themes that have been already published in the forum:
  Check this domain:
  http://forums.computers.Toshiba-Europe.com/Forums/Forum.jspa?forumid=30

  Update driver Wlan www.realtek.com.tw and disabling power saving for WLan would solve you problems.

• Satellite T110-11U: WLan connection dropped and very slow performance

  Hi people,

  I use a Satellite T110-11U running windows 7 Home premium.

  After having initially was very satisfied with its use, it now becomes more and more frustrating to use with wifi, with connections dropped and very slow performance.

  I have updated the BIOS and think I have updated all drivers wirelss, but could be the problem. It seems that wireless, software of management is at fault because the networks are detected, but not clinging.

  Any suggestion or tips to try will help save my sanity!

  Thanks for your help.

  John

  > have updated the BIOS and think I have updated all drivers wirelss, but could be the problem.
  If you need to make sure that you use the latest WLan driver.
  The driver can be downloaded here:
  http://APS2.toshiba-tro.de/WLAN/

  The laptop uses the Realtek RTL8191SE of WLan card.
  Please also reset the settings of the Wlan router. I had a lot of problems with my WLan and after the reset of the router, performance problems disappeared.

• After about 10 minutes connected my connection drops and I have to keep resetting my hub [BT Hub]

  After about 10 minutes connected my connection drops and has you keep resetting my hub [BT Hub]

  Hello

  What operating system is installed on the computer?

  Method 1: I suggest that you follow the instructions from the link and check if that helps:

  http://BT.custhelp.com/app/answers/detail/A_ID/7609/~/my-broadband-connection-keeps-dropping

  Method 2: Follow the steps in the link and check if it makes a difference:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Wireless connection problem - "could not contact the primary DNS server.

  Hello. As of today, I had an interesting problem with my connection wireless home.

  I have DSL, and my router (an Actiontec GT704-WG, for reference), periodically decides to abandon the internet connection throughout the entire family. This includes our parent unit, as well as my lap top which relies on a wireless connection.

  Today, I noticed that my laptop was switched to 'Access Local.' only I went to check my modem, only to find all the lights on the side were, and the computer was working fine. I tried to reset the wireless connection, activating / disabling the wireless and switch off, Plug and reconnect to the network without wire, as well as re-booting my computer. None of these things worked.

  I also received and error message that tells me it: "could not contact the primary DNS (fe80::341b:6831:1247:6707 11%).

  I don't know what this means, although I checked to make sure that my ISP address connects well, and as far as I can tell it is. I also checked everything that Microsoft suggested troubleshooting guides, nothing helps.

  I don't know if that makes a difference, but I noticed to my lap top more close to the router, the connection would come periodically power on and off. Also, these problems started occurring after that I installed and then uninstalled Firefox. I use Internet Explorer, but I wanted to try Firefox.

  Also, my computer is an application of Toshiba Satellite L305-S5944, running Vista Home Basic, I believe.

  I hope I've provided enough information.

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• When I install FSX SP2, the box of the menu showing the plan chosen and also in the game, the graphics are all messed up (black, black with lines on the screen and so on) do not know what to do? I need help.

  I have FSX Deluxe. When I installed FSX SP1, it was all fine, but when I installed FSX SP2 graphics were messed up. So I uninstalled FSX SP2 and tried again, and it was the same thing. So I uninstalled FSX all together and reinstalled fresh and put on FSX SP1, it was going well until I put FSX SP2, the same thing happened again, messed up graphics.

  So I uninstalled FSX SP2 and updated my drivers graphic and tried again and the same thing happened.

  I need help please.
  Thank you

  Hi Mmarshall_1993,

  Welcome to the Microsoft Answers site.

  We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

  (a) what operating system do you use?

  Method 1:

  Adjust display settings

  Many recent Microsoft games require a card video and monitor that can run a resolution of at least 800 x 600 in color (16 bit). Set the resolution of Windows display on 800 x 600 in color (16 bit), and then test the game. To do this, follow these steps:

  1. in Windows XP, click Start, point to settings and then click Control Panel.
  In Windows Vista, click on start to reduce this includes personalization thtype in the Search box and then click on personalization in the programs list.

  2. in Windows XP, double-click display.
  In Windows Vista, click display settings.

  3. click on the settings tab.

  4. move the slider of the desktop area or screen area slider to 800 x 600 pixel definition.

  5. in the Color Palette box or in the color box, click colors (16 bit).

  6. click OK and then click OK again.

  7. click Yes to accept the setting.

  Method 2:

  Adjust graphics hardware acceleration

  To adjust graphics hardware acceleration, use the method described for the operating system that you use:

  ·         Windows Vista

  1. click on start to reduce this includes this ima, type personalization in the Start Search box, and then click personalization in the list of programs .

  2. click on display settings.

  3. click on Advanced settings.

  4. click the Troubleshooting tab, and then click change settings.

  Reduce this includes this imIf that you are prompted for an administrator password or a confirmation, type the password or click on allow.

  5. move the notches on both Hardware Acceleration slider to the left of full (the parameter disable the accelerations of cursor and bitmap ).

  6. click OK and then click restart now.

  7. once the computer has restarted, test the game.

  ·         Microsoft Windows 2000 or Windows XP

  1. click on Start, point to settings and then click Control Panel.

  2. double-click on display.

  3. on the settings tab, click Advanced.

  4. click on the Troubleshooting tab.

  5. move the notches on both Hardware Acceleration slider to the left of full (the turn off all cursor and advanced drawing accelerations setting).

  6. click OK and then click OK again.

  7. test the game.

  Method 3:

  Check or turn on Direct 3D

  To check or turn on Windows XP Direct3D acceleration, follow these steps:

  1. click on Start, click run, type dxdiag , and then click OK.

  2. on the display tab, verify that all DirectX features are enabled. If all the features are disabled, click enable next to the feature.
  Note If some DirectX features are unavailable, verify that your video card meets the minimum requirements.

  For more information, follow the below mentioned articles.

  How to resolve display issues in Microsoft games

  http://support.Microsoft.com/kb/263039

  The Flight Simulator X game display flickers and are damaged on a Windows Vista-based computer that is connected to multiple monitors

  http://support.Microsoft.com/kb/933590

  Hope this information is useful.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Just installed via Steam Fable III. Just after authentication and signature in the game finished

  Just installed via Steam Fable III. Just after authentication and signature in the game finished. Solutions?

  original title: Fable III does not start yet. Solution?

  Hello
  You can try to fix the game and check if it helps. If the problem persists then try to uninstall and reinstall the game.
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

• Re: Satellite Pro A300-1EA - wireless connection, drop all the time

  Hi, I have a problem with my wireless connection fall all the time on my Satellite Pro A300 1EA.

  It happened earlier, but I've fiddled about a little with change of drivers and the removal of the connection settings for the registry and it then worked fine for months, until yesterday.

  There were several updates for Windows installed yesterday, but none of them have been updated driver for the wireless card, and they don't look like they should cause problems. The fact that the problem happened before makes me think that the updates can be anything to do with it.

  I use the * Intel PRO/Wireless 3945/4965/5100/5300 * for Vista 32 - bit version 12.2.0.11.3 drivers from the Toshiba download page.

  Other computers on the same access point have no problem, so I think it is specific to this laptop. The connection speed is normally 6 Mbps, but I cannot even check e-mail now without the abandonment of the connection.

  Laptop will be thrown against a wall soon if no one can help you.

  Thanks in advance.

  Edit: I've already made sure power settings are at maximum to the WLAN card, even if on battery, or what power management.

  Post edited by: mjbcrawf

  Hello

  Have you tried to use the Windows System Restore feature? After that your WLAN should work fine again.

  In addition, I can recommend the latest WLAN driver in the Intel page, it s version 12.4.xxxx. I installed the driver on my Qosmio laptop and don t have any problems with it: [www.intel.com].

  If you have any other questions, please let us know!

• How to make the computer to look for SBRIO on a LAN connection when wireless connections LAN and are active

  Hello

  I plugged my laptop to a SBRIO using a cable, I also did the same mask subnet the SBRIO and my wireless connection for laptop is also active. I run an application to transfer files from the network to the SBRIO. I was able to download the files from the network using the wireless, but when I try to transfer the files from the laptop to the SBRIO the application attempts to use the wireless instead of the connection to the local network. Is there anyway that I can apply to use the LAN connection instead of wireless?

  Thank you

  Mouda.

  You must manually configure the settings for the SBRIO and map NETWORK cable on the PC. They must be presented on the same subnet. Using the crossover cable, you can configure your PC to use an address like 192.168.0.10 with a subnet mask of 255.255.255.0. Configure the SBRIO to use an address as 192.168.0.11 with a subnet mask of 255.255.255.0. The PC uses the network connection by default for all addresses that do not match the specific subnet on teaching secondary (cable in your case) NIC

• Re: Satellite P850 138: Wireless connection drops

  Hello

  I'm having the following problem:

  Sometimes the WiFi on my P850 138 will drop and the symbol beside the clock network connection displays an exclamation point.
  To solve the problem, I have to open my wireless network connection and disconnect and reconnect to my router manually.

  My P850 138 is connected to the internet via a connection from WPA2-PSK with a BT Home Hub 3.
  Note: The connection to the router is actually not lost, just connect to the internet.
  Also, the router remains connected to the internet.

  I would really appreciate some advice.

  Thanks in advance!

  > In order to solve the problem, I have to open my wireless network connection and disconnect and reconnect to my router manually.

  From my point of view this is not question of portable but a router problem.
  Have you tried to connect the laptop to another wifi hotspot in your area to test the feature?
  Recommend doing this

  In addition, you can also check if there is updated firmware for Wlan hub.

• Wireless connection keeps gettting disconnected from the Internet.

  System: New Dell PC.  Internet browser: IE.  Connection: Wireless.  Replaced the Modem;  Router: Netgear new 43... Have two other laptops, a Toshiba and an ASSUS. System: All Windows 7.  Other computers are on the same WiFi problems - not stay connected. This PC has two antennas on the back to connect to the wireless router.

  Browser used: Mozella Firefox (the worst of all a fall); Google Chrome (still drops), now: IE, version 9, works best with Yahoo.com email than other browsers and email applications.

  Use: System security Norton, tune up utilities, 2013 and Super Anti-Spyware - ALL have been used continuously without any problems before.

  Problem: as soon as the internet connection disconnects, trouble, launch window is. I select the HOTFIX and then, it reconnects to the internet. He said NO problem with cable. Then, it connects to the internet.  Wireless is full Signal, and the other computer in separate rooms have no pproblem.  I thought that the problem could be the newwork pilot program be corrupt and went to update, BUT got a warning that says to use the APPROPRIATE Microsoft program, or can be a problem. After about 8 hours of searching, I can't FIND driver network form of the Mircorsoft program. the versio curent is 2006.  This computer is a purchase of 2011.   Could be an internet code corrupt, registration, etc., but don't kinow how to solve this problem, if it is the problem?  Maybe different browsers, especially Mozella Firefox changed some settings when the browser has been installed or removed, because it is when the problem started.  MOZELLA Firefox has MANY complaints about this problem.

  I RESTORE the system once, after you get rid of Google Chrome and Firefox, got a new modem, etc, so think the problem MAY be the address or anything that is not recognized by this computer's internet connections? Have no idea.     Help would be appreciated no - no help from Dell (what's new), even thought it was under warrantey, they always try to collect the royalties to talk and then do not know anything on the networks.

  original title: why is my internet connection cut when browsing

  Concerning

  Hi MHBolin,

  Thanks for posting your query in the Microsoft Community.

  Wireless is a breakthrough in broadband technology. It can allow you to access the internet remotely. You have a problem with disconnect the wireless connection. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer the question-

  (1) that you get an error message or error code?

  (2) what other troubleshooting steps have done?

  (3) have you done other changes on the computer before the show?

  I would like more information about the issue.

  Method 1-

  Sometimes, the computer cannot locate the IP address of the router. These problems can be solved by a simple reset of the router.

  See the steps-

  (a) locate a PIN size on the back of the router (that would be your reset button).

  (b) use a sharp object or to press the button to reset for a period of ten seconds and release.

  (c) now, wait for the lights on the router to Flash.

  (d) once the lights are stable try to connect to the internet.

  Method 2-

  You must ensure that there is no interference between the router and the computer.

  The municipalities which are-

  (a) a cordless phone

  (b) thick walls

  (c) large bodies of water like the fish tanks

  (d) other wireless devices.

  (e) an immediate proximity to the router (maintain a distance of 6 feet from the router).

  Method 3-

  I would have you look at the article-

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-GB/Windows7/why-can-t-I-connect-to-the-Internet

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  If the problem is specific to browsers besides Internet Explorer, then I would have communicate you with their respective groups.

  Support for Google Chrome

  Support Mozilla

  We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• Vista SP2 wireless connection drops

  People, I know this question has been asked before, but I can't find a solution to my problem.  I've had my Dell laptop for about 6 months now and it worked perfectly, without any problem wireless connection.  On Sunday, August 9, I installed Vista SP2.  It updated no problem at all, but once he did his final reboot, it connected to my wireless router for about 5 minutes, then dropped connection.  Now, when you restart it only connects for a minute or two wireless then abandons connection.  I then uninstalled SP2 but it has not solved the problem with wireless.  My wireless adapter is an Atheros AR5007 and drivers are all up to date.

  Anyone know how I can fix this so that my wireless signal stay tuned as he used to pre SP2?
  Thank you.

  Hi KK_14,

  Thank you for visiting Windows Vista Microsoft answers forum.

  Fixing the problems of common networking in Vista:

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

  http://support.Microsoft.com/kb/299357

  Disable the IP helpdesk:

  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter

  2. scroll down to the IP assistance service, right-click on it and select Properties

  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.

  4. then click on "Stop" to stop the service from running in the current session

  5. click on OK to exit the dialog box

  Disable IPv6:

  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  Disable the DHCP Broadcast Flag:

  Link: http://support.Microsoft.com/default.aspx/KB/928233

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756/ (how to back up and restore the registry in Windows)

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

  Click Start, type regedit in the search box, and then click regedit in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  Locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}

  This registry path, click the (GUID) subkey that corresponds to the card network that is connected to the network.

  On the Edit menu, point to new, and then click DWORD (32-bit) value.

  In the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.

  Right-click DhcpConnEnableBcastFlagToggle, then click on modify.

  In the value data box, type 1 and then click OK.

  Close the registry editor.

  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.

  Please let us know if it helps.

  Thank you and best regards,
  David

• Equium M40X - WLan connection drops when using in the other room

  Hello

  I'm using the SATELLITE M40X series PC laptop and using TG585 ADSL2 + Modem / 802.11 g Wireless Router.

  Wireless connection works fine if I use the laptop in the room even when the wireless router is pluged but if I bring my laptop to another room and then disconnected just conection.

  I am living in 3 flat bed room and room are right next to each other on an equal footing.

  * Note: * I use apply desktop PC as well and is not in the same room where the wireless router is pluged, desktop pc has no problem with the wireless connection.

  Any idea?

  Thank you

  Hello

  I think that the reason for this problem is that you WiFi signal is too weak in other rooms.
  You can try to change the WiFi channel and may also try to disable Wlan energy saving
  These parameters may be changed in the Device Manager-> card Wlan-> properties-> Advanced tab.

  But to be honest I m not sure if this will help you.
  I have a similar problem with my Toshiba laptop not
  The WiFi signal is too low in my other room there are two walls and it s clearly perceptible for me when the WiFi signal is ok, and the WiFi signal is too weak.