Wireless drops/exit only on my laptop

Similar Questions

• Computer connects to the network wireless as "local only".

  I am running Vista Home Premium SP2 on a HP Pavilion laptop.  I've never had any problems to connect this machine to a wireless network before, in hotels, at home, or anywhere.  My current home network is a modem - cable-> wireless-> wireless netgear n300 router.  My laptop connects to the internet via the modem cable directly or a wire from the netgear router.  I have a second, almost cell identical (it's intel, while the one who does not is AMD) which connects to the network wireless without any problem.  Two iphones connected wirelessely without any problem.  My HP laptop is the only one who refuses to connect to the internet.  Connected to the wireless network, it has access "local only".

  I tried the solution in this article: http://support.microsoft.com/kb/928233

  The question does not seem to receive an ip address, the computer receives an ip address.  I have disabled the IP v6, ran the norton removal tool, because I only had to a point and tried all other suggestions in these discussions: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/thread/0949042d-074e-43ab-ba95-3c06cc2aa6be and http://social.answers.microsoft.com/Forums/en-US/vistanetworking/thread/bc08f0e7-49a9-4458-9e0e-149b2df362ec.  I've uninstalled and reinstalled the adapter and all TCP/IP and network protocols associated with it.  I am at a loss and would welcome any ideas.

  Here is the result of the command ipconfig / all:

  Windows IP configuration

  Name of the host...: Arrakis

  Primary Dns suffix...:

  Node... type: broadcast

  Active... IP routing: No.

  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :

  ... Description: Atheros AR5007 802. 11 b / g WiFi adapt

  Physical address.... : 00-1E-4C-B2-32-BC

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  IPv4 address: 192.168.1.5 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Wednesday, 28 April 2010 21:40:55

  End of the lease...: Thursday, April 29, 2010 21:40:55

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DNS servers...: 192.168.1.1.

  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: NVIDIA nForce Networking Controller

  Physical address.... : 00-1B-24-FA-DA-80

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 10:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: isatap. {31C080CE-FE0B-4D50-B734-C782C9A25FBC}

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: isatap. {B198B0D3-B70A-4E3E-858D-9774C414EECD}

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 14:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 02-00-54-55-4E-01

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Card 6TO4

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  If anyone has this problem, it has been resolved by rolling the security settings on the router WEP.  I got the answer from the support client netgear.

  Amazing how two iphones, another laptop with XP and a laptop running Ubuntu Linux all about them without any problem, but wouldn't connect Vista laptop.

• Unable to connect to wireless internet; can only connect to the network, saying "Local only" or "limited connectivity".

  I have problems to connect to any wireless internet - home, library, coffee shops.  He used to work, began to get in trouble (i.e. could not connect sometimes to the diner, but works in the library) and now does not connect to internet AT ALL wireless.

  Only connects to the network saying "local only".  And I'm lucky even get that much.  Furthermore, I don't know if it's a router problem or what, but it does not even accept the password for my home network (my boyfriend has no problem on the internet with Windows 7 and the current router password).

  I use a HP G60 laptop (maybe?), I don't remember the model exactly.  Windows Vista.  I am frustrated beyond belief.  I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".

  In summary: is it a hardware or a software problem?  It seems to be a software problem that can have an impact on the material.  Nevertheless, what can I do to fix this?  Y at - it a software update, I need to try for my wireless card?

  This computer is not yet a year old, and already I am unable to use it for the internet.  Not very well I plug my ethernet cable router wireless in the library.  I bought a laptop for a reason, but it is on track to achieve more like a desktop.  Very disappointing.

  Someone, please help!

  I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".

  Is this a hardware or a software problem?  It seems to be a software problem that can have an impact on the material.  Nevertheless, what can I do to fix this?  Y at - it a software update, I need to try for my wireless card?

  Hello

  When the man from BestBuy, fortunately for us technology is not a cleaning product, there is no way of knowing if someone puts his hand on it and knowing what is wrong rather than moving oral reprimand...

  First step, log on to the HP support and download the latest drivers for your wireless card.

  The HPG60 is a very good phone but its wireless card has problems with old drivers.

  In which case it's a hardware problem, contact HP support.

  In general, you can use this process to find out what's wrong with the wireless.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• HP G6 1b60US - Ralink wireless drops every 30 to 60 seconds. Ethernet is fine.

  HP G6 1b60US - Ralink wireless drops every 30 to 60 seconds.  Ethernet is fine. I tried a USB WiFi and it works perfectly.

  That's how I test: run CMD, ping google.com t

  With this race in the background is very easy to see the question.

  I tried earlier versions of the Ralink drivers, nothing solves the problem.  What is interesting, it is same when I'm on WiFi from UBS, if the Ralink is not disabled, there will always be the question.  (Although I am CERTAINLY connected via USB wifi.

  It's a real pain, since I use Remote Desktop a lot, and whenever that happens, my connection to the DRC crashes.

  Problem solved!

  My old Linksys WRT54GL router has been arrived in mixed mode (B/G).  All I did to fix this was set to G only.

  So if anyone runs into this problem, be sure to try this change.

  Thanks again Paul, to help him.

  George

• TECRA S2 when battery charging, Wireless drops every 5 min

  Hi, I have a very annoying problem.

  When I'm surfing wireless at home I have no problem, but when I start to charge my battery, wireless turning off every 2 minutes or so to reconnect immediately.

  This problem does not exist when I am in charge battery next to the wireless router. Only when I'm in the living room.

  Is that what someone else has this problem or is - someone has a solution for this?

  Post edited by: jeetn

  The wireless network card supports different options. In the Wlan card properties, you should find a tab advanced.
  There you can change different settings. Please try to disable the power save option WLan Card.

  I don't know if it helps but you know train is free ;) m

• I've only had my laptop a year

  I've only had my laptop G72-251NR for a year and my hard drive died. Is it still under warranty, even if my warranty is up on my laptop? Can I send it and the set? I was told that this is why I shouldn't buy hp, because of this problem. I love my laptop but it cost just as much to replace a hard drive about to buy a new laptop, any suggestions?

  Hello

  Unfortunately the hard drive is covered under the same period of the guarantee that your laptop, but it is a fairly simple process to replace the HARD drive yourself and is not too expensive - there is a brief guide on this operation below.

  The player at the link below is an example of one that would be perfect for your laptop.

  Hard drive 500 GB

  The procedure to replace the hard drive begins on Page 50 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive.

  If you do not have your recovery discs, you can order a replacement set using the link below.

  http://support.HP.com/us-en/document/c00810334

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Lexmark wireless printer connects to the Acer laptop.

  My printer lexmark series 400 and Motorolla phone Wireless will not connect to my laptop w/mic adapter to Acer4520,

  can someone advise?

  What happens when you try? Lexmark support say?

• which begins to turn my abilities wireless off in my lenovo SL510 laptop with win7 pro

  Which begins to turn my abilities wireless off in my Lenovo SL510 laptop with Win7 pro? I have a dlink router connected to my office. My system works fine until I leave for a short period, then it disconnects?

  Thanks for any help!

  Hello

  
  Modifications were made to the software or the hardware of the computer before the show?
   
  Method 1:
  Check out the link and follow the troubleshooting steps and check.
  
  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
   
  Method 2:
  Visit the link provided and follow the steps.
  
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 3:
  Reinstall the drivers for the network adapter and check if it helps.
  
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• I've lost the ability to copy files on my CD player. When I drag and drop, the only authorized action is 'move' and it does not work.

  I've lost the ability to copy files on my CD player.  When I drag and drop, the only authorized action is 'move' and it does not work.   I tried press and hold the CTRL key while dragging, and when I do that all the other disks show "copy" as the default action, but when I hover over the action CD player available only changes to 'pass '.   I ran the Microsoft Troubleshooting tool for CD/DVD players and he said that the media were not writable, but there is a blank CD in the drive.  Any ideas on how to solve this problem?

  Thanks, but the cd/dvd drive works well - I can burn a cd with windows media player for example.  the problem is that I can't copy files to it.   I can play CDs (haven't checked the DVD).  I can not do and could do before, is doing drag and drop files on it.  The only authorized action is "move".   This happens even when I click CTRL + do drag.   I can copy it to any other player, but the CD player, and when I hover over the "exemplary" drive CD goes to 'move '.

  have you tried using a different suite of cd/dvd burning?

  Imageburn is free and easy to use: http://download.imgburn.com/SetupImgBurn_2.5.7.0.exe

  There may be something to play with your access keys if you have a (ie., wirekeys)

• Wireless will not allow on the laptop HP 2000

  Help! I have a laptop HP 2000 and all of a sudden the wireless function does not work. No matter what I do the rest orange button. I don't have Wireless Assistant installed on this computer. I tried to download it from another computer and install to mine, but he stated that the version has not accepted. I only got this computer 6 months. Any suggestions would be greatly appreciated.

  Hello

  You have a few options in my opinion please try these steps can help you solve your problem.

  (1) disconnect the battery & adapter then press on & press and hold the power button for laptop for 30 seconds then switch on and check if the wireless led lights.

  (2) go to Device Manager then uninstall the drivers wireless network card and restart the device and check if the light is on.

  (3) try to do a system restore to the date where unit was working fine.

  (4) Please update the Bios & Wireless driver from the HP website.

  (5) click on start search type Recovery Manager, and then click on it once select Yes on user access control, and then select I need immediate help and then select driver and select request recovery driver wireless and install it and then restart the device.

  (6) If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

  If you still have the same issue then you need to call HP tech support and get the replaced part.

• Problem of sound with Skype only - HP Pavilion laptop Windows 7 x 64

  I have problems with the sound with Skype only - all other software that requires a sound work fine.  I don't hear my correspondent.  My Skype settings seem to agree and I get no error message.

  I run 7 x 64 window.  I have a laptop HP Pavilion G7.

  Any help?

  Hello

  Sorry, you have problems. For Windows 7, try this:
  
  Sign in to Skype. Click Tools at the top of the window, and then select Options in the menu drop-down. Click Audio settings in the left pane. Under the speakers, you can:

  • Use the Volume slider to adjust the volume.
  • Click on the arrow down in the drop-down menu to select the appropriate stakeholders.
  • Test the speakers by clicking on the green arrow next to the drop-down list of speakers.
  • Click on the link to make a free test call to make a test call.

  It may be a good idea to plug a headset as a test to see if it works. You don't need a headset with a microphone; Just use any headset allows you to listen to your music on your iPod. The nice thing about using a stereo headset is that you can always talk through the microphone on your computer, but only you will hear responses from your correspondents, and is as much your comments.

  Skype has a document of support practice that may help you: I can't hear my friend... (Windows desktop) .

  And now, the delicate question: it is possible that your friend accidentally cut his microphone? Or what is happening with all of your calls?

• Issue wireless and slow graphic on Toshiba laptop

  It must connect to the Internet even I 30Mbit/s so fast connection and sometimes it is not even connect to the Internet from the worst wireless card that I've ever seen of the age.
  And can someone tell me what I have on the wireless settings when I test my speed it will not display the parameters: 356Mbits/s, he jumps, here is a picture where I mean what settings I have to correct this: [http://www.pikipimp.com/pp/pimped_photo/s/image/41/108/213/Sk_rmklipp4.JPG?ts=1233587970173]

  And the second 2 is the graphics card: oh my 6 year old laptop guy girfriends, and he acknowledges so fast when I click to watch videos online on the Internet, but with my NEW Toshiba laptop, I expect age to open video diffrient, here on example: [http://channelchooser.com]
  Why the graphics settings are so old so bad it sounds as if it was a joke, so slow when I play games The Graphic 3D - OMG - why?

  These 2 are not only the problem, but they are more important problem for me that's why I posted them, because there are more question, but it's only under Vista or XP as well?

  In your case I would update the graphics driver and WLAN.
  The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  The image that you posted the question wireless is not available.
  However, I put t know how to access the internet, but it could also be a router issue. Try to update the firmware and check all of the WLAN settings on it and on your laptop.

  On the issue with online videos, I can say that you should try a different browser or plug-in (often you need Adobe Flash Player) is not working properly.
  Check and update software which are required for this.

• Wireless connection works only when the printer is turned off

  my desktop computer requires an adapter wireless for internet connection.  installation of this card was problematic and I discovered I mean it was because of my printer - a kodak esp 6150 desktop, which can work wireless.    I can only connect wirelessly when the printer is off on this computer.  However, two other laptops that do not need a separate wireless adapter are able to connect wireless when the printer is on.  any suggestions?   Thank you.

  Hi Moscotty,

  You can read the following article and check if it helps.

  Windows wireless and wired network connection problems

• Wireless router local only: Vista

  Hello, I use Windows Vista on my laptop which has the feature integrated wireless. Today, I tried to set up a wireless router to my laptop so I can connect to the internet. I have been using a modem for the past 2 years (Motorola, model SB5101i) and are connected to the internet just fine. However, my router is detectd by my laptop but has local access only. I can't connect to the internet and I don't know why. The model of my Linksys WAG354G router isn't. I tried to plug in an Ethernet cable to my router and the laptop, but nothing helped. I also ran ipconfig in cmd and this is what I got:

  Link-local IPv6 Address...: fe80::2047:93e8:e09:611 has 13%
  IPv4 address...: 192.168.1.64
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.1.1.

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  Link-local IPv6 Address...: fe80::e876:711 has: 563 a: aaad % 12
  IPv4 address...: 59.189.234.244
  ... Subnet mask: 255.255.252.0.
  ... Default gateway. : 59.189.232.1.

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 12:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : domain_not_set.invalid

  Card tunnel Local Area Connection * 13:

  The connection-specific DNS suffix. :
  IPv6 address: 2001:0:cf2e:3096:20fd:11f8:c442:150 b
  Link-local IPv6 Address...: fe80::20fd:11f8:c442:150 b % 14
  ... Default gateway. :

  Card tunnel Local Area Connection * 14:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 15:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 16:

  The connection-specific DNS suffix. :
  IPv6 address: 2002:3bbd:eaf4:3bbd:eaf4
  ... Default gateway. : 2002:c058:6301:c058:6301

  I don't know what I can do to remedy the situation. Hopefully I can help. Thanks in advance!

  Seem as if your router and modem do not communicate.  You mya need to reset your Motorola modem is back sink with your router.  First thing you can do is to go to the command prompt and do an ipconfig/release.  Then turn off your computer.  Once your computer is off, turn off your Motorola modem for at least 2 minutes.  Turn on the modem and the computer.  This should run your modem and router.

  Us how it goes.

• Why do I keep losing my Internet connection when I still have a good WIRELESS card on my Windows 7 laptop?

  I always lose my Internet connection but yet my network signal strength is good. This happens on my Windows 7 operating system, but not my Windows Vista operating system. I'm afraid that this could have something to do with the firewall settings? He was repeatedly interruption of connection with the Internet and the two operating systems. Unplug the unit and reset the router solved the problem with Windows Vista, but only momentarily for Windows 7. I ran the diagnosis and resolution of problems. This utility can detect never any problem. Sometimes the diagnostics displays a problem with a connection to the Ethernet cord (but the laptop with Vista OS was fine). I have reset the wireless adapter, which claims to be working very well, over and over again. I have reset the settings of the Windows Firewall to its default settings. Don't know what else to do. Help, please! I fear that the problem exposed my laptop to a potential security threat.

  • I use a public network location setting I got with a security access code
  • Atheros AR9285 802.11b/g/n WiFi Adapter is the adapter connection
  • NETGEAR's router
  • WPA2-PSK is my type of security
  • Radio type 802.11n
  • Windows Firewall on
  • Microsoft Security Essentials on real-time
  • Microsoft Virtual Mini Port Adapter (WHICH I'VE NEVER SEEN BEFORE JUST NOW) displayed in network connections, but is not connected!

  Mindy

  Long @Mindy

  Try this,

  Assuming that the signal is strong, and that there is no noise in the electrical environment (http://www.ezlan.net/wbars.html ).

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------

  Still a problem?

  Check support for the router and make sure that your using the latest firmware for the router.

  Check the support site for the manufacturer of the computer and make sure that you use the latest drivers.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET