Wireless is coming through a LAN port

Similar Questions

• W7 PC on the router LAN port cannot find connected wireless OJ Pro 8500 has more router suite upgrade

  My broadband provider has replaced my internet router with a new one with dual N band Wireless LAN GigE ports and. The 8500 a printer has been successfully connected WPA Wireless and works very well with a laptop Windows 7 Sony connected wireless and Apple devices.  However neither the desktop PC connected windows 7 Dell LAN or even Sony laptop when it is connected to a router LAN port can find the printer.  I tried to reinstall the printer software with the latest version on the site of HP OJ8500_A910_1315 and the installation fails as auditor of network environment cannot find the printer. I ran the diagnostics of HP network with two firewalls in the PC and router disabled without success. The LAN itself seems to work OK as the PC can meet, Exchange files and and can access the internet.  The router has been checked by the technical uupport of the broadband service provider.  The printer is visible as a network connected device in Windows Explorer so you expect the HP software to see. The only option to set the printers IP address and use it in the installion process or is there other settings that I can change to get the HP network environment checker works correctly?  Thoughts would be appreciated.

  Thank you very much.  Unfortunately the router (a BT HomeHub4) does not have such a context, in the hub Manager, which is accessible by the user but I have now found it has the ability to set the IP address of a wireless device if I did. I reinstalled successfully on the printer to all computers.

• Equium M50 will not recognize the LAN port - error: disconnected network cable

  I own a Toshiba Equium M50 and have problems with the Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller.

  I used to connect through a Modem/DSL switch "ADDON" and had no problems. I then replaced the ADDON with an ADSL Modem/Router "NETGEAR" DG834G to win the wireless port, and since that time my machine won't recognise the LAN port. .

  I know that cables are OK I used with other phones and had no problems. I can also plug a PCI card to connect without any problems. It seems to me that if the Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller has a problem with the netgear Modem/Router.

  Anyone out there with a similar experience and some tips/suggestions?

  PLEASE

  Hello

  For me this doesn't show t as a problem of LAN card but your router is a problem.
  Check Device Manager if the network card is correctly recognized. If there is no yellow exclamation point, so all is ok!
  You can try to remove the network adapter from Device Manager and reboot after new install driver LAN again.

  The question has looked after installing or connecting the new Netgear modem router.
  I would recommend to check first the settings or update the firmware on this router.

  I found more useful websites
  http://compnetworking.about.com/od/WindowsNetworking/f/cableunplugged.htm

  http://www.experts-exchange.com/Networking/broadband/DSL_Cable/Q_20381405.html

• WRT54GP2 cascade successfully, but VOIP does not work via the LAN port

  Hello

  I searched a lot for a solution to my problem, but have found that it is really above my level of understanding. My apologies if this question has been answered before – if she, I can not find or understand.

  I have an existing wired network that is running on a Netgear WPN824v2. This configuration works perfectly.

  I want to add a Linksys WRT54GP2 to this network to act as a Wi - Fi hotspot and the VOIP connection point. I don't want to replace the Netgear with the Linksys, I want the different VOIP in a physical location access point. I would therefore like to them so cascading: Internet-> modem->-> Linksys Netgear. I do not want to bind the Netgear and Linksys Wireless, but instead, use a cable.

  I actually had this works almost perfectly, using the following parameters:

  NETGEAR IP 192.168.1.1 with wireless off

  Linksys IP 192.168.1.254 with disabled DHCP, active wireless.

  In this way, the Internet works, I can open a session the two routers and wireless of Linksys works very well.

  The problem is that VOIP will not work. I think it is because the connection between the two routers is: port LAN Netgear-> port of Linksys LAN.

  I understand VOIP tries to go through the Linksys WAN port, not the LAN port. If I connect LAN Netgear port-> Linksys WAN port, the phone works indeed but I can no longer connect to the Linksys, wireless router and unable to connect more.

  I would like to VOIP and the wireless work at the same time. Is there a way to get the VOIP by the Linksys LAN port instead of the WAN port? Or is there a way to make wireless and router connection work, if the Linksys is connected to the Netgear via its WAN port?

  Thanks in advance!

  -Jono

  When you wired your VOIP phone directly to the Netgear router you can in fact calls?

  If your Netgear router connect to the Linksys router to the WAN port, it will not work. As you already disable DHCP on your Linksys router and you will not have access to your Linksys router. This type of configuration has some other parameters.

  Connect the Netgear router to router Linksys on the WAN Port, then connect your computer to the router on the LAN Port Linksys. To connect to the Linksys router using default IP: 192.168.1.1 and change the LAN IP of the router Linksys 192.168.2.1 and DHCP must be activate and click on save settings. Once the parameters are now save your network power cycle and all your computers should be able to go online.

• N600 LAN ports not giving Gigabit speeds

  I have a dual band of N600 wireless router and am unable to see 1000 Mbps when connected to one of the four ports. If I plug my Imac directly into my capable modem, I can connect at 1000 Mbps. I swapped the cable and changed the network settings on the Imac in 1000Baset Full Duplex without success. This device is sold as Gigabit Lan ports, but I'm unable to get this connection.

  Any ideas for me to try?

  It have LAN fast ethernet gigabit ports. See datasheet.

• If 2 Airport extreme can stay connected to each other using their LAN ports?

  Hello friends,

  I would like to know if 2 Airport extreme or 1 Airport Extreme and Airport Express can stay connected to each other using LAN ports at the ends? I thought this is the LAN port 1 connected to the WAN port on the 2nd.

  Thank you

  To clarify the issue and the scenario, one of my friend described a typical scenario in which there are 2 AEs. AE1 has an ISP in its port WAN and AE2 has a different ISP in its WAN port. This 2 AE can mutually connected between them by using ports LAN AE1 and AE2 ethernet cable? He said this could be feasible if AE2 remained in bridged mode, without using the ISP attached to its WAN port. I just don't get how this is possible. Friends of the search help.

  Thank you

• The LAN on an Express port still works as a LAN port when in mode "extend the Wi - Fi network"?

  Assuming that the current versions of all units in the airport:

  If you have an extreme as your primary access point, and you have an Express "extend a Wi - Fi network" mode, the LAN on the Express port still works as a LAN port?

  Yes. You can connect any Ethernet device to that port.

• Re: Satellite 3000 - X 4 (PS301E-000KEN) - Driver for RJ45 LAN port

  Hello

  Looking for a Windows XP driver for this mobo high and low. Saw a post saying RJ45 built in loan but no components behind it? Documentation of suggests its loan?

  Any ideas if there is a compatible model that I can use the lan driver from? In addition, and I guess that's maybe that is not there - can't seem to identify the manufacturer of the network adapter.

  any info - even if its bad would be useful.

  Thank you very much
  N.

  Hey Buddy,

  What you mean with no. components are behind him?

  Perhaps some of it was equipped with LAN port, and other models are not. According to the specs on the Toshiba site there is no RJ45 LAN port:
  http://UK.computers.Toshiba-Europe.com/innovation/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=UK&com.broadvis ion.session.new = Yes & PRODUCT_ID = 15932

• Satellite U200 - cannot get the LAN port to work

  Hello

  I hope someone can help. I reloaded a new version of windows on my laptop, I don't have the recovery disk but downloaded all the drivers from this site. However, I can not the LAN port to work. I tried several times to install the driver but no luck. In the Device Manager, it says device cannot start for the Intel 82559 fast Ethernet LAN on motherboard.

  Can someone please offer some advice? I am a person of correct PC then understand the concepts and can get around the windows.
  Thank you

  Satellite U200 what model do you have? The number of other Sat U200-xxx would be very useful to know which LAN chip was equipped with your laptop.

  But generally, you can find all the drivers on the European driver Toshiba page.
  Check the model number and serial (bottom) and choose the correct LAn driver Toshiba page.

  Notes; Win XP should be updated to the last State. I mean that you need SP2 and the additional fixes to ensure that everything would be fine.

  Good luck

• Satellite 1100 Z3: enable LAN port

  can someone tell me if the lan port at the back of the laptop (satellite 1100 z3) can be activated
  Thank you

  [Edited by: admin October 22 05 18:41]

  Hello

  as far as I know that the Z3 Satellite 1100 is not a network card.

  But normally, if the network driver is installed correctly and that the network card is not a problem, simply create a connection to the local network. The LAN port needs to be activated separately.

  Good bye

• Satellite 1700-300: No. Lan port in Device Manager

  Hi Forum.

  I am currently repairing a 300-1700-Sat and reinstalling windows ME (Yuk I know but that's the preference of customers), however it does not show that there is any ethernet on the system hardware. There is an ethernet port on the back of the laptop, but it just does not appear in Device Manager.

  My first was, however, that it can be disabled in the Bios, I checked and there is no option for ethernet.

  Any idea people?

  Hello

  I'm not an expert, but you are sure that the laptop has a LAN port to 100%?
  The laptop is an oldie. That's why I didn't find a lot of information in the internet, but I studied a bit and found that the device supports only:
  Parallel port, PS/2 mouse or keyboard, 2 x USB modem RJ11, speaker/headphone, microphone (no internal) port, PCMCIA port and external monitor port of CRT.
  There is nothing of LAN port

• Satellite 1800-504, doesn't have a LAN port

  I have a friend who has a Satellite 1800-504 he bought 5 years ago. Now, he bought an ADSL modem, what he wants to connect to the computer. The problem is that when the connection (ethernet) is supposed to adapt is closed. I've never seen anything like this and I'm wondering if anyone knows what it is? Is it not possible to connect to this computer to a network (ADSL modem)? or what we can do about it?

  We live in Sweden, hope someone has the answer to my question, so I would be very happy.

  Hello

  I saw several times on the Toshiba notebooks. LAN port on this good old classic is not available, but the solution is LAN PCMCIA card.

• Configuration of the R8000 lan ports

  You can change the port speed/duplex of the Lan ports. I have a mismatch in duplex on a lan port?

  No they are auto-sensing. It is with your ISP, or another device?

• I want to cancel my subscription to Stan coming through iTunes to my Apple TV.  None of the instructions work.  Can someone give me another method?

  I want to cancel my subscription to Stan coming through iTunes to my Apple TV.  None of the instructions work.  Can someone give me another method?

  What do you mean by "presented guidelines? Here is a support article on how to manage subscriptions:

  View, change or cancel your subscription - Apple Support

  See you soon,.

  GB

• HPPavilion for computer laptop 15-ab516TX: cable Ethernet stuck in the LAN port

  Hello

  Ethernet cable is stuck in my laptop's LAN port.

  He won't get out if I pull/push it.

  I plugged in for the first time in my brand new laptop and don't want to brake it.

  Please help and solutions.

  Should I take my laptop to hp service center.

  Will you please answer soon because I can't travel with hangging cable.

  Help!

  Solved!
  Use a screwdriver and slowly 2 x take the cable into the port of the back of the laptop.
  In this way...
  Safe also take the cable without damaging the laptop components.