Wireless is disabled when I Boot on my PC

Similar Questions

• Security issue on Z480: how to disable the F12 boot in Z480?

  I am owner of Z480 here. In the BIOS, I put in HD as first boot. I also set the password for the BIOS. But I discovered that I can press F12 when the laptop starts to enter the boot menu and I can choose to boot from DVD or other medium.

  So how to disable F12 key start in Z480?

  Hi all

  I found a way to disable the "F12 Boot Menu": in the BIOS, check the "Password on Boot" option and the BIOS admin password. So, even when I pressed F12 at startup, the laptop computer invite you admin password to continue to the Boot Menu.

  This could give a little annoyance that I have to enter the password twice (password BIOS and OS). But it's the price of having better security.

  If anyone has a better idea or found a weakness in the way above, please let me know.

• Cannot install Vista SP2; 'upgrade' disabled when I try and re - install by KB958044

  Hello

  After three days of struggle with trying to get Vista Ultimate (purhcased at the United States) SP2 update, and several failures of various updates automatically downloaded from Windows Update: I finally found and read

  http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/09c291bf-3868-4DFA-8004-139ec8018aa1

  MS response has been a link to: http://support.microsoft.com/kb/958044

  But when I try to follow the instructions in KB958044: 'upgrade' is disabled.

  I don't really wish to throw three days work of re - install my programs, tweak the settings, etc.

  Thank you, Bill Woodruff Bill Woodruff

  Hi Bill Woodruff.

  Because the standalone SP2 package failed with the error: '0 x 80070490', you can try to run Checksur (KB947821) to address corruption in the manifest of component maintenance (EC) and try to install SP2 Standalone Package.

  To run Checksur (KB947821) follow the mentioned below as follows:

  (1) download and run the system update by the following article preparation tool: KB947821. Description of the system update tool for Windows Vista and Windows Server 2008: http://support.microsoft.com/kb/947821

  (2) put the computer in Cleanboot before installing the stand-alone Package of SP2:

  To perform the cleanboot, refer to:

  Click Start, type msconfig in the search box and press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click on continue. On the general tab, click Selective startup, Selective Startup.Under, clear the check box load startup items. Click the Services tab, select the hide all Microsoft Services check box, and then click Disable all. Click OK.

  How to perform a clean boot procedure to determine if background programs are interfering with a game or a program that you currently use: http://support.microsoft.com/kb/939671

  (3) try to install the stand-alone Package for Windows Vista SP2.

  (4) after Installation of SP2, put the computer in Normal mode:

  Click Start and type msconfig in the box start the search. On the general tab, select "NORMAL STARTUP". Click on apply, then OK. When you are prompted, click on restart.

  However if SP2 fails to install again, then you can have make a repair or Installation upgrade Inplace of Vista to install SP2 as mentioned in article KB958044 after uninstalling SP1.

  During the Upgrade Installation process, you will get the options go online to get the latest updates for installation and do not receive updates for installation. If you choose the option to go online to get updates, then it tries to download updates for the installation process, the windows updates required for Installation, including driver updates and it won't include all the latest Service Packs for Windows Vista.

  If you get an error "upgrade is disabled" when you try the Inplace upgrade, it may be due to a version of Windows Vista with Service Pack 1 installed, you can not upgrade by using media that does not Service Pack 1. If you have a drive without SP1 and SP1 is installed on the computer as an update, you need to maybe uninstall SP1 first and then start the Installation of upgrade or you can arrange a full disc with SP1 to make Installation of upgrade by using the product key came with your upgrade disc.

  For more information, please visit the link: http://support.microsoft.com/kb/951247

  If you try to uninstall SP1 to upgrade Installation, you can follow the mentioned below as follows:

  1) click Start, type Appwiz.cpl in the Start Search box, and then click Appwiz.cpl in the list programs.
  (2) If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  3) click View installed updates. Click service (KB936330) package you want to uninstall, and then click on uninstall.

  For more information, please visit the link: http://support.microsoft.com/kb/948537

  Hope this information is useful.

  Let me know if it worked.

  With regard to:

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why antivirus security alert saying is disabled when s W Ess says work and pc protection

  Win XP Pro - contradictory safety message.  Security alert icon saying antivirus is disabled when the icon of M s Ess said IT and protection.  Why is this and what can I do to stop what is happening.

  Thank you

  Win XP Pro - contradictory safety message.  Security alert icon saying antivirus is disabled when the icon of M s Ess said IT and protection.  Why is this and what can I do to stop what is happening.

  Thank you

  See the following: http://answers.microsoft.com/en-us/protect/forum/mse-protect_updating/security-center-message/558e1220-9f21-4e6c-be92-ddcc65d36c0c

  And/or

  See the response of the MSE Forum Moderator Stephen Boots in this thread: http://answers.microsoft.com/en-us/protect/forum/mse-protect_start/ive-windows-essential-and-is-showing-me-my-pc/c76fc125-c21f-46a9-8b9f-c9b1311171b1

  Kind regards...

• F8 key is disable when reinstalling windows xp installation hp Dvd

  F8 key is disable when reinstalling windows xp.

  boot from the dvd starts to install when the license page f8 key does not work

  It doesn't matter what I do. comment on tthe

  danielthornhill

  don't have >

  Thank you

• 4540 proBook s (Energy Star): Wireless got disabled - unable to start - no WiFi or Bluetooth

  My laptop worked well until one day all of a sudden the wireless got off. Switch wireless on my laptop has definitely turned amber (medium amber wireless is disabled and white wireless is enabled). Here are my comments or things that I tried in vain to solve the problem:

  1. When you press the plane mode switch gets toggled indicating that the switch is responding well but does not change the status of wireless.
  2. I checked the Device Manager and there was no sign of WIFI or Bluetooth. Then I reinstalled the drivers concerned. Still, there was no sign of WLAN & Bluetooth.
  3. Then I tried Safe Mode. Once again no sign of WIFI or Bluetooth in the Device Manager.
  4. Then I went for the Mode safe mode with networking. Once again no sign of WIFI or Bluetooth in the Device Manager.
  5. I tried disabling and activation then wireless in the start menu (F10), but still it did not work.
  6. I contacted HP Support. They took control of the remote control of my laptop and just reinstalled the drivers and told me that they could not solve the problem.

  I don't know that it's more a software problem that emit materials. There was a small bit of software called HP Wireless Assistant that could replace the physical wireless switch but unfortunately I can't find a compatible version to win 8.1.

  Can anyone help me please with this problem. It's terrible to use internet using Ethernet. Every day that passes is like a punishment for me. Please help me...

  Have you tried reinstalling the wireless card to be sure it has a good connection? Try to run to the top once with it deleted... then stop and reinstall.

• Automatically use the wired on wireless LAN connection when using the docking station

  Hey guys!

  I use the my T500 with the Advanced Mini Dock @TheDude recommended in this thread: http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T500-Recommended-Compatible-Docking-Station...

  I had almost a month now, and whenever I anchor my laptop I have to pass the connection wireless switch off hard or using FN + F5 and extinguish this particular radio.

  Is it possible to have the computer automatically choose the wired connection when it is available, otherwise use the wireless radio?

  I use Windows 7 Prof 64 bit.

  Thank you

  c1p0

  ThinkVantage Access Connections (AC) can be configured to do this. Change your location profile and change the order of the adapter associated with this place, for example, order first as Wired and Wireless second.

  When I am connected Wired and I pull the Ethernet cable, AC will switch to using wireless automatically. When I put the Ethernet back in, it starts automatically by using the wired and wireless don't report limited or no connectivity (which means that the switch has occurred). You will have to perhaps set up wireless in AC power options, i.e. disable radio when not in use (I did not sentence again).

  This could be similar to a docking station solution. Mine is without docking station; When I'm at the office and go to a meeting, I pull the wire and have continuity.

  Ideally, the CA should provide a solution. But it may take some fiddling.

• I see two windows 'readers' when I boot with the Option key

  I had to reinstall Windows 10 (with BootCamp).  Now, I see two windows 'readers', when I boot with the Option key button.

  How can I remove a?

  Start two of them in the same installation of Windows?

• When I boot FireFox on the Mac, the error message 'well, it's embarrassing... ' appears view full page on the Tools menu.

  When I boot FireFox for Mac (OS x 10.6.8), the error message 'well, it's embarrassing... ' back to PAGE VIEW covering the menu, tools, docking station, office,. Clicking on a 2 error message options 'restoration' or 'close' doesn't work. Since I can't access options menu under the eyes (and pressing 'ESC' does not display page, my only option is to force quit FireFox. I downloaded a cool FF program, but the same thing happens. How can I fix when I can't access the menu or tools, etc. ?
  PS. I'm going to use Safari to send this message.

  Well, it's boring.

  On Mac, command + shift + f should toggle the display between the ordinary and full screen. Does it work?

  If you can still access the menu bar, one of the Firefox settings file may be damaged. Try this, assuming you have the main toolbar:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • type or paste everything: in the address bar and press enter/return

  In the first table of the page, click on the button 'show in Finder '. This should start a new window listing the files and the folders.

  Leave this window open, switch back to Firefox and output:

  • "3-bar" menu button > button "power".

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

• All my songs on my iPhone are disabled when trying to import into GarageBand

  All my songs on my iPhone are disabled when trying to import into GarageBand.

  All of these songs in my music tab before you do my songs in GarageBand are inaccessible.

  The songs are disabled and not able to add or import them

  If anyone can help with this.

  Thanks for the help in advance

  What kind of songs do you have in your Music.app on the iPhone?  You can use any song in GarageBand, with digital rights not assigned, no music Apple or bought songs that have the file protected AAC audio file type. Alos, the songs must be stored locally on your iPhone. If you use iTunes game, download the songs first for the iPhone, before trying to use in GarageBand.

• I can't find Add-ons that will be disabled when I update to Firefox 11.0

  I received a message from the installer that four of my extensions will be disabled when I install Firefox 11.0. I tried to find these updates of the extension, but could not.

  The XULRunner extension is seen as a malware, so you probably better should remove this extension of your current configuration.

  • [743526/questions/743526]
  • [749007/questions/749007]

  Java Console extensions are not necessary.
  
  You only need the extension of the Java Console (Tools > Modules > Extensions) If you want to check and debug Java applets.
  
  You can uninstall and remove extensions of the Java Console, you do not need to run Java applets.

  See:

  • http://KB.mozillazine.org/Java#Multiple_Java_Console_extensions

  There should be an update to the Norton toolbar that is compatible with Firefox 11 (do not know Firefox 12 which will be released in the coming days, probably tomorrow, for some limited users.

  • http://community.Norton.com/T5/Norton-Internet-security-Norton/Firefox-11-support-for-Norton-toolbar/TD-p/679043

• How can I prevent word from opening when I boot my Mac?

  How can I prevent word from opening when I boot my Mac?

  It may be something added to the login items in System Preferences > users and groups

  When you shut down the computer, there is also a checkbox asking you if you want to keep the configuration of the application that you have at that time, in which case it will return all open applications.

• HP Pavilion 17 Laptop: How I PERMANENTLY set the clickpad to disable when you use a mouse?

  I know how to go into the settings and change so that the clickpad is disabled when the mouse is in use.  I leave the mouse plugged all the time because I don't like the clickpad.  However, I have to disable the clickpad whenever I restart the computer.  As if by magic, the parameter disappears whenever the computer is turned off.  I want him to stay permanently.  How to make that happen.

  It is important here to ensure that you do not change ANYTHING else (don't hit the DELETE key on anything)

  OK, right click on start, then run
  type: Regedit

  hit return on your keyboard

  Yes, there are a LOT of things here, but it is organized.

  you have the menu at the top, you want to hit edit and then find

  type: DeleteUserSettingsOnUpgrade
  
  If you look at the bottom of the regedit window, you will see the location, and MUST say: Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  If Yes, then on the right side (in regedit window), you do a right click on the DeleteUserSettingsOnUpgrade, and click on edit.    Change a 1 to 0.
  
  The logic here is the 1 means 'yes', a 0 would mean no..   We do NOT want the user settings to remove on the upgrade, so that we modify the value.
  
  Once you make the change and press 0, you can go out, and that will solve the problem.    Note that you must always indicate the pilots to turn off the touchpad when an external pointing device is connected if you don't have already done.
  
  The advantage of doing this, rather than turn off the touchpad, is that you can unplug your mouse to travel, and you don't have to make time before changes.

• My toshiba satellite L510 wireless is disabled. How to activate?

  My toshiba satellite L510 wireless is disabled. How to activate?

  My toshiba satellite L510 wireless is disabled. How to activate?

  If the OS is W7 using its start menu search bar.   For example, type Wireless and see what you get.   For example, on my HP Tablet that finds its Wireless Wizard that shows the status of wireless and a button allowing you to toggle it on or off.

  HTH

  Robert Aldwinckle
  ---

• When I boot into XP Pro SP3 I choose XP or a cloned disk that no longer exists, how can it be stopped?

  I cloned my C: drive but then re-formatted the drive because he never did what I have said.  Now when I boot I choose XP or the Clone.  As XP is by default I have nothing as he continues to start anyway.  What I want is for this new option of choice stop each time that I start.  My system is XP Pro service pack.

  I tried in msconfig Remove rogue reader, but there is no possibility to do so.  Can someone help or advise please.

  Remove a second version of Windows http://support.microsoft.com/?kbid=888023