F8 key is disable when reinstalling windows xp installation hp Dvd

Similar Questions

• No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  Hello

  Know what type of network card you have and download the drivers of its supplier.

  It doesn't matter what it is always a good idea before re-install/upgrade to log on to the computer support page, download independent drivers from there and put them on a flash drive.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Error code 45090 indicating the invalid product key when reinstalling Windows XP.

  Original title: Windows XP Activation.

  I reinstall Windows XP on my computer. I used exactly the same media that came with the computer. But when, Activation by internet, I got the error message 45090 indicating invalid product key. I have check the product key and enter it again, but the problem still persists.

  I tried via the phone (number 1-88) by entering the long number (Installation id) and it tells me that it is a number of invalid product or something like that.

  Help!

  Hi uagtecos,

  You can follow this link completely & check if the problem persists.

  You receive an error message after you enter the product key when you try to install Windows XP

  Hope the helps of information.

  Please post back and we do know.

• Problem product key after you have reinstalled Windows XP.

  Original title: Re-install windows XP

  My computer has a virus and so I had to format and reinstall windows XP.  I'm at the point where I have to enter the product key, but it won't accept it. I tried to change the B of 8 etc, but nothing helped. Can you help me?

  Hello

  1. are you using a CD provided by the manufacturer of the computer, or you use a retail XP CD?
  2 is the key that you are using a sticker on the computer or the one included with a purchase XP?
  3. What is the exact error you get when you enter the product key?

  If you use the key of a sticker on the computer, you need to be sure to use an OEM provided the CD to reinstall.
  The key to the sticker on a computer that says "OEM" will not be able to activate on a Setup from a retail CD.

  Follow the steps in the article.

  You receive an error message after you enter the product key when you try to install Windows XP http://support.Microsoft.com/kb/310637

  For reference:
  How and when to contact Microsoft and support Customer Service
  http://support.Microsoft.com/kb/295539

• Get the error when reinstalling windows 7 on the drivers

  Im having a problem reinstalling windows, I hope someone can help me the finishing process.

  When I start the machine I get an error saying please insert boot media device., so I inserted my disc of windows 7 to begin the intall

  I chose Custom just to do a clean install but when comes the next page, it says that I have not all drivers. I guess his doesn't see is not my hard drive and I have no option to choose and im stuck in this page... can someone help me with this one

  If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows 7 Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• Should what Drivers I when reinstalling Windows 7?

  Hello.
  I intend to reinstall Windows 7 on a disk and use the product key printed on the sticker on the side of my PC to activate it.
  
  My computer is: HP Pavilion p6769sc
  
  Link to the drivers: http://h10025.www1.hp.com/ewfrf/wc/product?product=5062791 & cc = us & dlc = in & lang = to & lc = on & query = LG060EA
  
  (Click on drivers, and then select Windows 7 (64-bit).
  
  My question is, which of these drivers do I NEED?
  I see a few drivers who seem to support various programs of HP that I won't not after doing the clean install from the disc of Windows 7.
  
  Oh and also, I was in a new rather than provided with the computer graphics card. What makes me not sure if I will have 'Original NVIDIA Unified Graphics Driver' and 'Original Intel Graphics Driver'.
  
  Thanks in advance.

  I would like to begin by downloading the following drivers;

  Intel® Chipset Device Software (INF Update Utility)

  Intel® Rapid Storage Technology (Intel® RST) RAID driver

  Original driver Intel Management Engine Interface

  Driver NVidia GeForce 344.11

  Drivers for Realtek 10/100/1000 GBE PCIe

  Original Ralink Wireless Networking Controller Driver

  Drivers Realtek HD Audio CODEC

  After installing Windows 7, install the drivers in the order presented above. Make sure to restart the computer after the installation of the Intel Chipset Device Software. Peripheral report with the ID of Windows hardware for any remaining missing or unknown.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Stuck on 0% when reinstalling Windows Vista

  I have a Dell Studio 540 (office) and it runs Windows Vista. It doesn't start and has been giving me these weird error as no device detected start and stuff like that. I contacted Dell and they sent me a disk so I can reinstall Windows Vista (and Yes, the drive is geniune). When I turned it on I pressed F12 and pressed to boot from the CD/DVD drive. It is now installing, but he's been stuck on the 'files 0% expansion' for an hour now. Is this normal? If this is not the case, what should I do about it? : The disk I/o is not dirty or anything because I just pulled out of the sealed CD cover

  You are in contact with Dell and they look at your problem as related material, I suggest that you continue with their help.

  You take my advice and use the free Dell Support Forums, too?

  If the problem persists, contact Dell or try their free support Forums, as is the recovery of Dell software you use.

  http://en.community.Dell.com/support-forums/default.aspx

  And there is more detailed information to Dell for troubleshooting.

  http://support.Dell.com/support/eDOCS/systems/dim2350/advanced.htm

  See you soon.

• features lost when reinstalling windows 7 ultimate?

  During my first installation of windows 7, he had this thing like organizing on the desktop. It has different subjects and the subjects had shortcuts to my programs. It would be like "microsoft office" and when I clicked on tiny shortcuts seems that has forged ties to Word, PowerPoint, etc. I recently had to pass on my hard drive to a new because it was a failure and I just reinstalled windows 7 and I can't get it back. I don't know what it's called, but it's kind of similar to ObjectDock if you know what it is. I was wondering if anyone knows what his name and how can I get it back? Note: it is not a gimmick.

  I ended up calling dell today because I realized other things are missing, and they helped me to find out what it was called. It is called dell dock. It is therefore useful if you haven't already you should watch it upward and install it! but thanks for trying to help me!

• FSX 1722 error when reinstalling windows 8

  Hi, I recently bought a new laptop from MSI game with win 64 8 x but before installing FSX it tells me 1722, but it is almost done and I tried the CMD thing and it did not work I tried first of all it does not work waiting time tried also does not (due to error HAUL)

  And who have been something that I was expecting more than 5 months!

  See if you can adapt this for Windows 8 and then use it as a guide for setting error 1722.

  HP Scanjet products - Windows Installer MSI display errors during the Installation of the product
  http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=1118287&prodTypeId=15179&prodSeriesId=1118287&ObjectID=c01278160

  Have you tried?  If so make sure that you right click on CMD.exe and use the option 'run as Admin '.  Perform, even if your own username is administrator.

  Error 1722 when reinstalling Flight Simulator X

  http://support.Microsoft.com/kb/928080

  Error 1722 FSX 8 windows installation

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-gaming/error-1722-when-installing-FSX-Windows-8/6d465c3e-9FB4-4287-aa5e-631c30b1c6ae

  How to open a command prompt in Windows 8
  http://www.bleepingcomputer.com/tutorials/open-an-elevated-command-prompt-in-Windows-8/

• Standard VGA driver does not load when reinstalling Windows XP

  Reinstalled Windows XP on my computer, but he doesn't not load the driver VGA Standard - so I can't install the video driver ATI Radeon x 600 for my graphics card.

  In Device Manager, it shows (in yellow) in the other devices section, "Video controller (VGA Compatible)".  I tried to update / install video driver with the Windows XP installation CD in the disc drive, but whenever he says, can not update material.  Whenever I start, the Found / installing the new hardware box arrives, but after a search, he finds no driver to install the video card.

  Of which I did some research on the web, I need to load the Standard VGA driver before adding any other drivers (IE, ATI Radeon x 600 video driver) - but Windows XP does not say the driver VGA Standard of its installation disk.  Help!

  I have not yet tried reinstalling Windows XP again, FYI.

  Hi people,

  You could try to remove the "video controller" in the section other devices in Device Manager, then restart the computer.

  Who needs to be reinstalled card generic video driver.

  However, if you have the correct video card driver, you should be able to reinstall this driver from Device Manager.

  Right click on "Video controller" entry and go to the "updated driver software".

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Reinstalling Windows without installation disks

  Let me clarify some things that I think are made:

  Laptop = ideapad z575 which is a windows 7 64 bit computer.

  Windows wouldn't boot because it has an error since avg and update wondows - avg seem to be ashamed that their driver is the last show at startup but remove avg then showed another driver and it all points to a depth of problem.
  In short, I feel that a reinstallation is the best way forward.

  I saved my data sisters so happy to do a quick format and reinstall of windows 7 - have the serial number sticker, but no disk I do not think that it shipped in all.

  I didn't modify all partitions, but using a utility disk in the back that I was able to access it via the standard boot drive I can put another active partition... now to return back I had to create a bootable utility that I made from USB, it also allows me to inspect the readers through a windows interface.

  So I am here and able to do a lot in the back through my USB. I saw and was able to run a recovery program that is located on one of the partitions. But he told me that something was friends with readers and I think it's because of my defining a different partition as the only active.

  What is the next best step for me it feels exaggerated do not use partition lenovo gave to reinstall windows, hoping I wouldn't need browse and find/download all the drivers, etc... and not to mention updates of bios etc...

  I can say that I have the following discs and back access and access through GUI.

  When I say access via the GUI I found that I was able to do this system revoery options screen when he says click to search the drivers an interface will appear and where I can the eyebrows of all partitions and USB - which was pretty cool. The button says "Load Drivers" and from there, I can choose the partition and try and run one touch back.

  When he first boot from USB it looks like as it is by default and selects a Boot called drive (X and the default folder is the Windows/System32 folder.)

  Here are the disks or partitions I can see and explore

  Lenovo (C 27.5 Free GB GB 28.9 contains just request files and drivers.)

  Local disk (E it looks like there's a Windows installation on it that I can see my sistsers files in the my documents (I got these by using XCOPY to get the complete recursive directory and do be careful if you use just "copy" as it will ignore folders and files inside!)) For me, it's the normal bootable disc and one that is broken.
  349 GB free of 421 GB so this seems to confirm that it is the main trunk and use the partition.

  Local disk (D only 166 199MB MB no said no files and folders at least since the GUI - perhaps back can show me something...)

  Start (X 29.1 MB of free space of 31.5 MB I don't think it's my USB (NOT confirmed) the last modified date is 2009! he seems to have a windows installation - is possible to reinstall from that?) I tried to click on a setup.exe found here but it does not work via the GUI as it comes to find specific drivers is not not a general file Explorer.

  I have 2 drives USB also visible to help me. I got the above files to another on the ERD. And the 3rd is the CD. If these are known as CDROM (F, Reapir disk (G: I did that) and 32 GB Flash (H)

  Maybe I need to burn an iso install wondows in the latter. Who can be a last resort.

  What is perhaps a few right steps to take right now. I think I should be able to change my active partition and get a contact working again by reversing what I was doing back disk partition - don't remember the name... a few trial and error required.

  But I hope that with this info I can get my sisters laptop that works again. I think also that if I took it to a local shop they will simply be to format and reinstall windows 7 and drivers do not care to take the time to maybe get to a situation of factory. It is because the baisc economy. I don't want to go that route because I know I can do what I want to just make the best way.

  Knew nothing about this function - will keep in mind for the next window of time slows down or does not start - throw his toys out of the pram etc... suffering from windows computer slow? You are not alone

  In any case, I think I've sorted it. Hope that C is not too fragmented because I chose to not be complicated with a format and keep the original scores. In this way its just easier.

  Wifi that I had remembered to disable in the BIOS.

  If you want help about this, then please contact on twitter @cambsdigital

• L7680 installation fails when reinstalled windows because it needs administrator rights, but it is

  I had some problems with my laptop with Windows 7, so I did a windows repair (not a clean reinstall).  Now my Officejet pro L7680 works as a printer, but many features do not work, and the HP Solution Center starts. So I tried to reinstall the center of HP solutions from the original disk, but it fails because it must be in administrator mode.  BUT IT IS IN ADMINISTRATOR MODE! I have rebooted, tried safe mode, close the printer/disable... stil can't install HP.

  Hi foxyjoe,

  What was the reason behind the windows repair?

  It is possible since you reinstall from scratch you have still some problems with your operating system. Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=2512009

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11. start the L4uninstall.exe

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• Wrong key after you have reinstalled Windows Vista.

  Some time ago I reinstalled Vista. I used the same key product, all worked without problems. But today (after re - install) it sends me the message: Please activate Windows, false key. If I try to write old product key is not accepting it. If needed I can send picture of key, the next is original one. So, what I could do to use Vista in the future, he wrote that left 2 days only.

  P.S., Sorry bad English. :)

  How to activate Windows 7 or Vista manually (activate by phone)
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone and waiting for someone to help you with activation.

  Also:
  How to activate Windows Vista by phone
  http://support.Microsoft.com/kb/940315
  http://www.mydigitallife.info/2008/10/13/how-to-activate-Windows-Vista-by-phone-activation/

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Access denied 0x80070005 when reinstalling Windows 7 activated

  I tried several post suggestions and nothing seems to work.  are there recent fixes for this?  In addition, I'm not presented with an option to activate by phone if not sure what number I would call even.  I'm sure that everything was fine when I finished the reinstall, but now it seems to be inactivated?

  Try to perform a repair installation:

  How to do a repair of Windows 7 Upgrade - Notebooks.com

• Activation key is invalid after reinstalling Windows 7?

  So today, I traded one of the my laptop a new SSD HARD drives and do a clean installation of Windows by downloading an ISO clean, non-modified and write my activation key, and it installed fine, however, trying to turn it on, I get a message saying that my key is invalid for activation. Should I start my old HDD and first disable the original copy? Because I don't like * not to spend money on another key for this crap OS, especially given how much they cost generally.

  the key to your report is an OEM SLP key. an OEM SLP key only works with the manufacturers recovery media.

  You can use the key to your COST.