Wireless not working not not after recovery from sleep, T440s

Similar Questions

• fqdn ping fails after recovery from sleep mode

  client system is win7 64 bit

  Server DSN is isc bind 9.7 works on win 7 64 bit

  local system of fqdn ping fails after recovery from sleep mode.

  I do not think that the ping never hits the network.

  Nslookup of full domain name or name of the system only exists.

  the system name ping only succeeds.

  then after ipconfig/release, ipconfig / renew, successor to ping the domain name full local system.

  someone at - it thoughts or ideas?

  Hello

  From the description of the problem, it seems that your computer is on a domain. I suggest you post the same question on the link below. The link given below is link TechNet Support for Windows 7. The question facing you is best for TechNet forums.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Feel free to write us if you have any other issues related to Windows.

• TrackPoint and Touchpad stops working after recovery from sleep mode

  Every now and then when my thinkpad edge 11 out of the previous day. The pointer doesn't move. It makes no difference if I use the trackpoint or touchpad. In this case I have to restart the computer using the keyboard and then pointing devices up and running again. No one knows how to fix this? The problem does not occur every time during the recovery from sleep mode, but sometimes it does.

  Hey won1,.

  uninstall the current driver for touchpad/trackpoint for your device.

  Windows should then install its own generic drivers. now with generic drivers install, place your unit in standby mode and then resume.

  see if the same error occurs. in the meantime, go to > http://support.lenovo.com and update your drivers in the bios unit.

• Windows Media Player 12 on Windows 7 stops working after recovery from sleep mode

  I have problems to make Windows Media Player 12 to run correctly after a system sleep (standby). It works very well after the maximum boot and for as long that the machine is not going mode sleep. It is only a problem with Windows 7 and Media player 12. All other Win 7 applications seem to work correctly. The system also works very well for Vista/Media player 11.

  I installed my upgrade Windows 7 Home Premium x 64 as a new installation on a separate hard drive. This problem exists right after installation - no other software not added. I then installed all the updates MS available and the problem has not disappeared. I installed the OS a couple of times (including a copy of Windows 7 Professional x 64) on another hard drive too and the problem remains.

  Media Player 12 works perfectly until the system goes into sleep mode - either by itself, or manually. When it resumes, Media player launches, but when you try to play something, he will only play the first couple notes of music and then freeze. Same thing with videos - it will get the first couple of frames played, and then hang. If you continue to stop and restart Media Player, eventually it will be totally suspended and after a few minutes the error "Server execution failed" message. At that point in the Task Manager, wmplayer.exe will consume is a complete base my Quad CPU (25%), do nothing. Sometimes, you can kill the process and take control of the back of the PC. Other times it crashes completely and the only thing you can do is to shut down the PC.

  Media Player 11 under Vista Home Premium x 64 on the same PC works fine. I was never able to get Media Player 12 in Windows 7 to work properly after a standby/on standby. If I reboot, everything works fine so it seems to be that something related to a problem of sleep/recovery.

  HP supports suggested restarting the service WMP network sharing.  That has not helped, but if I stopped and set to manual start, Media Player would play the sound/music but not video of several tests.  But if I stopped and began to WMP 12 a few times more the problem returns.

  Well after working with the help of HP for several days, it seems to be something between the video card and card mother / BIOS between them.  At start-up, everything works well, but after the exit mode ensures, hardware diagnostics show a failure of local video memory.  Media Player is finally touched by it.  Doesn't a lot of sense to me that this does not happen under Vista, Win 7.  You have to return the PC to HP for diagnosis/repair.

• Mouse & keyboard does not not after waking from sleep

  This problem started about 6 weeks ago, and I've exhausted all remedies except that maybe a Win update caused the problem with updates of November.  It only would be not the first time a Win update caused a problem.

  I am running Win 7 Professional 64 bit, 3.4 processor concert image, 16 gig RAM and 24 concert page file.  This occurs only when everyone is connected and puts the computer in "sleep mode" all connected, and that includes letting go the computer in mode 'sleep' a timed framework, or by using the command Win to sleep or Sleep.com.  It does not occur when you cold start, warm boot, or log off and then put the computer in standby mode, and that includes using the key on the keyboard, programmed to the Sleep.com or Win command.  In these cases, everything works fine even wake up the computer when it is disconnected.

  If I put the computer in mode 'sleep' while connected and then when I press a key or move the mouse, the computer will wake up and I get the login screen since I'm protected by Word.  The lights on the keyboard light (wired 4000 natural ergonomic keyboard) and the light on the background lights of the mouse (Wireless Mobile Mouse 4000) so I know the two USB ports are powered.  However, when you press any of the keyboard to type in my password, it does not display what I typed and the mouse cursor does not move. Both are totally insensitive.

  Short reboot, the only is to unplug the USB cable from the keyboard as well and the mouse receiver, wait 10 seconds, then reinsert them.  When I do that, everything works as it should.  It is a pain in the back since both are on the back of the computer.

  I tried using different USB ports, mouse & keyboard Centre of the reinstalled several times, checked all drivers, run ' sfc.exe/scannow"which doesn't show any problems with the system files and Device Manager has assured times checked to allow them to turn on the computer and made sure any setting relevant to the USB ports or peripheral interface that have the option to"Allow the computer to turn off this device to save power"are disabled.

  This is of course only related to someone to be connected, because it works very well when that I disconnect.  This tells me that's not the BIOS, as suggested by older discussions.  If it was the BIOS, then there is a problem when you do a cold or warm boot.  Also, I have the BIOS configured to recognize all USB devices when starting and not only ports keyboard or mouse.  The reason for this setting must be my hard drive to backup (USB 3.0) available at startup.  I checked everything I can think in the registry and can't find anything that could cause this.  I have hibernate off (never use it and it uses 10 GB of disk space for the file), and the implementation of the options for "USB selective suspend setting" is set to off.

  My solution is as follows: I disconnect, and then put the computer on "standby".  When ready again, I have simply to move the mouse, type my password, and Windows opens with the mouse and the keyboard works as it should.  It takes a little longer to wake the computer if it was put in mode 'sleep' when you are connected with the exception of the time and the hassle of having to unplug the mouse & keyboard, but I don't have to jump through that hoop to make it work.  Up to 6 weeks ago that this computer was fine with the same exact material because there now.  In the night, I just put it in "sleep" mode when connected from the computer has a task in Task Scheduler that wakes up the computer by running the insomnia (to keep him awake for backup) and backup programs runs, then shuts down the computer when finished.  This works because I do not use the keyboard or the mouse as I SLEEP.

  I would be grateful for any suggestions!  I'm a user for more than thirty years (even go back to the PMO for those of you who know what it was), built my own computers for years, so I can handle everything that needs to be changed.  It intrigued me, and I don't have very often coming up with computers.

  PROBLEM SOLVED!

  I thank very you much for working with me and remember to do things.  Sometimes techies like us, as they say, 'can't see the forest for the trees' If you know what I mean.  It's like the authors of the software manual do sometimes in that they assume you already know the steps has a B, and they begin to step C.  Sometimes it is more obvious that we see because we are looking for something more complicated.

  I had already tried another keyboard and a mouse, and I thought some time ago, I did a clean boot, because I know that can open the door and where is the problem.  If I did, I forgot or did not find the problem.

  I apologize for him accusing Microsoft of having caused the problem with an update, but I've had this happen before and thought that it had happened again.  It turns out that it was a software problem, but not here where I thought it was.

  After doing a clean boot and noting that the computer and the mouse worked after the return of the mode 'sleep' with a clean boot, I knew there must be something to load into memory and showing in the notification area.  The only things I had done in the six weeks was to add a quick Weather Channel.com Weather app and I had exchanged and received my new SkyCaddie.  It is a portable device that shows the yardage, etc. on the golf course.  The SkyCaddie uses a program called CaddieSync Express that allows the device to communicate with the web site to download updates of the course, the software updates, etc. scores.  The version of the program used on my old unit had a problem after I unplugged in that when you open Internet Explore nothing would show - no communication with the web.  I had to sign out and then sign back in and then fix it every time.  It seems that in this new version the problem has been resolved, but they have created a new.

  By default, the program loads into memory and the icon appears in the notification area.  When you connect the SkyCaddie using its USB cable, the program recognizes and prepares to synchronize.  The problem with this new version, is that even if you do not use the synchronization program, this is what prevents the keyboard and the mouse works correctly.  It must focus on a USB hub even if you do not use.  The solution was to go to the configuration of the system to prevent this program from loading at startup, it placing a shortcut on the desktop and then clicking this shortcut to load the program prior to attaching the SGX.  I then let him do his thing, and when it's over and I disconnect the SkyCaddie from the USB port, I close the CaddieSync Express icon. and then when I put the computer to sleep and then wake it up, the keyboard and mouse work fine.

  I knew that I had installed the new CaddieSync Express all the time, this problem started, but I never thought about it because he had never caused this problem before the cause of the problem.  Trust me, they will receive a call from me tomorrow so that I can tell them that the problem they cause.  Remember what I said in the first paragraph.  They would not yet be aware of the problem, and maybe after I speak with people of their software, they'll send an email informing the owners of this problem until they get it fixed.

  Now, since systems vary so much, including how are managed USB hubs, this can occur only in rare cases.  I came just to be one of these.

  Thanks again!  Perhaps some of these other people who have posted in the forum who had the question keyboard & mouse will read this thread and it will help them solve their problem.

• Portege R830-10R: No. USB connection after recovery from sleep mode

  Nice day!

  I have experienced the problem depending on my Portege R830-10R for a long time.

  Quite often, when he recovers as soon as "sleep" mode it loses the ability to recognize USB devices and built-in 3G modem does not work as well.

  After awhile, like 10-15 minutes of work (or), the problem is solved by itself, but normally, it is not the case.

  If I try to send the laptop to Hibernate or "standby mode" again, while this problem is active, allows to say, it not put into hibernation and crashes on a midway with a black screen - so I have to stop it manually, and then start again.

  Normally, the only way to solve the problem is to restart, but the issue comes after the next "standby".

  Someone has something like this? Any solution available?

  Hello

  > Quite frequently, when he recovers as soon as "sleep" mode it loses the ability to recognize USB devices and built-in 3G modem does not work as well.

  Have you noticed this behavior from the first day of purchase?

  Only special USB devices assigned as USB flash memory stick or USB HDD or are
  other devices such as the USB mouse or USB keyboard has also affected?

• EliteBook 840 G1: Elitebook 840 G1: black screen with cursor after recovery from sleep mode

  Since yesterday, 15. August, whenever I take the laptop to sleep, all I get is a black screen and after a minute, a cursor on a black screen. The laptop does not revocer of this State. Only solution is to force the reboot.

  A reinstall of Win 10 has not changed anything.

  Video driver is version Intel official site. The version is 10.18.15.4248.

  I don't know if I got the version before the reinstall.

  I have installed nearly all other official drivers from the HP page packages.

  Any suggestions?

  Problem solved.

  Cause: I updated the 256 Vram 512 MB. This caused the mess. Put in back has solved the problem.

  This looks like an obvious bug to me, but who is responsible? Intel or HP?

• optical drive disappears after recovery from sleep mode

  While recovery mode S3 sleep and looking at windows Explorer, a green bar progresses inside the address bar. During this time my DVD RW is present on the screen under the heading devices with removable storage, but as soon as the green bar comes to an end, DVD RW and even the devices with removable storage section disappear.

  This occurs only on standby S3 and I have to reboot in order to keep my DVD RW.

  The DVD - RW is a disk IDE (LG Super Multi DVD drive GSA - 4163B) with an IDE-> Sata converter to allow the use of the sata cable to the motherboard.

  Any suggestions as to why this happens in sleep mode S3 only?

  Hi Peter,.

  What is the brand and model of the computer?

  I suggest you to run the Fixit described in the article and verify.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060/en-us

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756
   
  (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows
   
  If the problem persists, you may need to update the update of the firmware to the last by visiting the manufacturer's Web site.
   
  Hope this information helps. Response with status so that we can help you.

• The menu bar clock freezes after recovery from sleep mode

  After the upgrade to Sierra, I noticed that the clock in the menu bar (top right) show wrong time.  This occurs when the iMac comes out of his SLEEP.  When I hoover the pointer of the mouse on the clock, it would turn into a spinning ball (i.e. no response).  I have to disconnect and reconnect so that the clock in the menu bar to indicate the correct time.  She would continue to work until the next time that the iMac comes out of SLEEP.

  Anyone facing this problem?

  Have you tried booting in safe mode (hold down the SHIFT key at startup)? The problem persists?

  If you create a new user account, does?

• Satellite P300 - white screen after waking from sleep state

  I'm having this problem:
  The LCD screen may be empty when the computer is "awakened" from the sleep state. Nothing is visible on the internal LCD or an external monitor.

  There seems to be a solution:
  An update of the firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.

  described here: [white screen after awakening from fallback status | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlView.jsp?soid=1642844&moid=1209152]
  -----
  I also found this, but it didn't really help me much further.
  [Satellite P200D and WinXP: no display after waking from sleep mode | http://forums.computers.toshiba-europe.com/forums/click.jspa?searchID=880412&messageID=118143]
  -----
  In fact, I think I'm able to solve myself, and I don't like not my laptop to be gone for two weeks or more. I just need some advice on where to find a correct upgrade. Is - this driver BIOS or graphics? Which version should download, where... etcetera. More tips on how to solve the problem are also welcome.

  -----
  Edit: link and no need for words of line. : s
  Edit2: grammar correction.

  Hello

  > An update of firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.
  If you check the Toshiba document you would see that your Satellite P300 is not related to this issue.

  In your case I would recommend upgrading the BIOS and graphics driver.
  In addition to keep your operating system up-to-date.

  I had this problem under Win XP and a MS patch and an update of the graphics card driver helped solve this problem.

• Satellite T110 - Defective Bluetooth after waking from sleep

  SATELLITE T110 Bluetooth will fail after awakening from sleep.
  The icon will be flick between white and green as he seeks my device (phone).

  I ve reduced the problem to the laptop, because if I try to pair again phone to the laptop it fails. It's almost like he has a block?

  Operate as planned, then I have to charge fully.
  Bluetooth connects then as planned.

  It only became a problem because I installed the latest BIOS v 2.40
  I use the 64-bit Version.

  When the problem occurs I run the Bluetooth Diagnostics and it comes back as fine no error reported. It s a pain now because I use the laptop mode "sleep" more off.

  This is due to the new update of the bios.

  Can you after waking from sleep just restart BT stack and try to connect to the mobile phone?
  You mean that with the old version of the BIOS, everything was OK?

  Last question: what was the reason for the update of the BIOS? I hope not the fact you want to have the latest version.

• Photoshop CC 2014 quits unexpectedly after waking from sleep on Mac OS x. How can I stop this?

  Photoshop CC 2014 quits unexpectedly after waking from sleep on Mac OS x. How can I stop this?

  suturenet wrote:

  It's a stupid system, it won't let me post more of the report.

  Yes, the forum software is stupid, but you are insulting the wrong people.

  BOILERPLATE TEXT from the FAQ:

  https://forums.Adobe.com/thread/375816?TSTART=0

  Do not be abusive or aggressive in your tone

  A post of sounding aggressive, demanding, accusatory or abusive will often evoke a response aggressive or abusive and unnecessary.

  Remember, you do not discuss Adobe here in the user forums.  You ask the help of users of volunteers like you who give their time for free. Nobody has any obligation to answer your questions.

• Satellite A660-18 - powers off after waking from sleep mode

  My powers of Satellite A660-18 wide for 2-3 seconds after waking from sleep. I upgraded the memory from 4 GB to 8 GB, using the site of Crucial, so I know it is compatible. BIOS is updated to 2.00.

  Don't know what to do, how can I fix without turning off completely from mode "sleep"?

  Hey Buddy,

  > I upgraded the memory from 4 GB to 8 GB
  And have you had the problem before you upgrade memory too or as memory upgrade?

• Bluetooth is not ready after waking from sleep on Windows 7

  After updating my Tecra M10 Windows Vista x 64 Enterprise to Windows 7 x 64 enterprise, sometimes, when I wake up the laptop from sleep, Bluetooth is not ready.

  Hibernation does not solve the problem, he needs a reset which is a problem for me because I usually have a lot of open applications.
  In this case, the only Bluetooth devices in Device Manager are:

  * Bluetooth RFCOMM
  * Bluetooth USB Controller-5 at TOSHIBA

  When everything works well, the Bluetooth devices in Device Manager are:

  * Bluetooth RFBUS
  * Bluetooth RFCOMM
  * Bluetooth RFHID
  * Bluetooth USB Controller-5 at TOSHIBA

  How can I restart Bluetooth without having to restart the entire system? Turn wireless on and off the silder side does not work.

  Thank you
  Paulo Morgado

  Thanks for sharing!

• Fingerprint reader not working not not upon awakening from sleep for the windows login

  Hello
  I have a new T540P with a validity fingerprint reader.

  About 80% of the time, the fingerprint reader does not meet the windows login screen after the wake up the computer from sleep mode. It works 100% of the time when starting from a stop position, however. Once connected, it also works 100% of the time. The question arises when you log in to windows.

  I tried many things

  -uninstallation/installation of the device in the Device Manager and finger print manager pro software

  -prints of setting through two fingerprint Manager software pro (lenovo) OR through the windows built in options of the control panel of the fingerprints

  -disabling "allow windows to turn off this device to save power" in Device Manager.

  Thus, I must say that I have an another T540P I ordered as a replacement. Both models encounter the same problem.

  Is it a matter of broad platform affecting all models of T540P? It's frusterating.