Wireless NOT working

Similar Questions

• Satellite L300 - wireless not working do not at all

  Hello world

  IM new here and my name is Jodie. My husband and I bought new computers laptop a few weeks ago, Satellite L300.

  On my husband a wireless just stopped working, the switch is on but no lights appear. I tried FN and F8 says the Wireless does not work. I checked in the device under netwrok Manager cards to see if he said the same thing as mine and the wireless adapter is missing? It's the Atheros AR5007EG wireless Netwrok adapter.

  Can anyone help? Cannot believe what has happened and they are only 2 weeks :(

  Thank you guys
  Jodie

  Hi Jodie!

  Have you tried to update the driver for wireless network? On the Toshiba WLAN portal, you can find the most recent version that should work on your laptop:
  http://APS2.toshiba-tro.de/WLAN/

  I'm not sure, but you should look in the BIOS. Perhaps there is an option if wireless LAN where you can enable or disable WLAN.
  Check it!

  In addition, I recommend also updated the BIOS, and if nothing can help launch you the Toshiba recovery disc. You will receive the factory settings where everything should work fine.

  Good bye

• Wireless not working not not on portable Satellite

  I bought my laptop in November and were much used but last night my wireless completely disappeared when I was on the laptop. It's now only send me options to connect to the Ethernet cable.

  I tried to restart the PC but the problem persists, I also tried to turn airplane mode on/off, but that does not change.

  When I tried to diagnose the problem, he said that the tuner wireless did not work.

  Can anyone help me with the problem or I should send it to a service center?

  Thanks for your help

  It is important to know if the wireless card is available in Device Manager and if it s recognized correctly without any yellow exclamation.
  In case the WLan card isn t listed in Device Manager, then your wireless card may be defective.

  But let's assume that NO hardware problem.
  In this case, the common WLan card driver reinstall should solve the problem.
  Try to download the compatible driver WLan page driver Toshiba and check if the installation work. It would be possible that the system must be restarted after such a facility.

• There is a possible fix for a wireless not working on a HP Photosmart C309a radio?

  My photosmart C309a is now unable to detect my wireless network.

  The wireless network Test report indicates that the wireless radio is not working.

  When I run the Wireless Setup Wizard, it just continues when sailing with the bar multicolor without detecting anything.

  I heard that it is not compatible with the new Netgear routers. But it worked for a while until I have reset the settings

  factory default when I encountered some problems with my connection.

  Thanks for any info in advance.

  Art

  HI raddoc888,

  If your printer is being warranrty and turns to present a radio wireless defective or damaged then the printer can be replaced. Call our technical support at the 1-800-474-6838, so we can help you with the problem of the printer and check your warranty on the printer.

  Work around for printers of security:

  You can connect the printer to your router via an Ethernet cable and then use the router to connect wirelessly to the printer.

  Out support options warranty

• Wireless not working not not after recovery from sleep, T440s

  Sometimes when I take the laptop from SLEEP, wireless do not work...

  Try the new drivers. Helped me a lot.

  http://ns3369637.ovh.NET/index.php/Outils/drivers/Intel/WLAN/PROSet-Wireless-WiFi-Software/Intel-Pro...

• U430 Touch: Wireless not working only not with windows 7

  My friend bought a U430 Touch with Windows 8. He hated Win 8 so I helped him downgrade to Windows 7. Now the work of dowsn t wireless. Ethernet works very well and we are able to get on the internet, but Wireless does not work. I been to Lenovo website and downloaded the drivers from their site of support, but nothing weems to work. Is there a special driver I'm missing?

  Too bad. Just worked on it. Downloaded the drivers for Win 8 WLAN and that fixed it.

• Dv7-7202tx Notebook PC ENVY: Wireless not working not

  Hello

  My wireless stopped working last night and the function button is orange. I tried to restart, fixing through the System Mechanic, but that did not work. Of course, I didn't have internet access so I couldn't download a driver, but I don't know where the best driver is for my machine.

  I am at work today and can download a driver if need be. My CH30PA product number.

  Thank you

  Lynne

  Invite you to reset the bios (the steps below)

• NICs not appearing only in normal mode and wireless not work not (witness still on orange)

  Hello all and thanks to anyone who responds! I'm pretty clueless when it comes to computers, so I hope it's just something simple.

  I am running Windows Vista Home Premium with a Presario F700. The processor is AMD Athlon X 2, processor Dual-Core TK - 55 1.80 GHz. 958 MB RAM and 32 - bit operating System.I don't know if you need this information but better safe than sorry. OK for the problem.

  The computer is supposed to be wireless, but I cannot make it work. When I go to Device Manager in a single Normal boot device shows. It is said: NVIDIA nForce 10/100 Mbps Ethernet #2. I'm not sure what that means, but he says that this device does not work correctly. I couldn't HP Wireless Assistant to work so I followed some advice that I've seen an uninstalled but that did not help at all. I'm sure that's not my firewall is disabled. And I use Norton Security, but I don't know which is not affecting him either since it was a problem before I installed Norton.

  Also, if I boot mode safe more things highlighted in Device Manager. For example, it shows these: card 6TO4, isatap.hsd1.fl.comcast.net, NVIDIA nForce 10 / 100 Mbps ethernet #2 miniport (IP) wide AREA network, wide area network (IPv6) WAN miniport, miniport Wan WAN (L2TP), miniport WAN (PPPOE), miniport Wan WAN (PPTP). But only in Safe Mode. Even if I try Boot Mode safe mode w / Networking they always disappear and it's the only one. I have tried everything I know how to do but I'm at a loss as to what prevents it from loading the Normal start.

  On a side note, someone said to make sure that the adapter is enabled in the BIOS and I checked and the only thing remotely sounding like a NIC is enabled. He wasn't that anything listed in the order of boot on an adapter until recently, and it's at the bottom of the list with an exclamation mark next to it. However, the exclamation point is now gone, but NIC is always at the end of the list. I also ran the check disk thing, and he came back fine. I ran a full scan of the system without any problems but a few tracking cookies. I tried to uninstall in safe mode and start back to normal to leave the computer to reinstall without success. I also used the option reset back to the factory. While time consuming which did not help either.

  If anyone has any ideas as to what I can I would be very happy. I'm hoping to give this computer to my brother as a Christmas gift. Sorry for the long post but I wanted to make sure I was as complete as possible to save everyone time. Thanks again. And if I missed any information please let me know and I'll fix it.

  If reset you to factory, it should work.  It is a switch broken (I don't him think) a motherboard problem or probable internal problems with the wireless. Take it to a store because it is a common problem with these computers.

• Pavilion g4t-1100: Wireless not working not

  guys my wireless is not working.recently I upgraded fron win 7 for win 10.i updated all the drivers, but it's not working.when, I press the f12 button lighting should illuminate to orrange to white, but it does not turn and it is turn on airplane mode.

  Hello @prasanth1,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I came across your post about the WiFi problem and wanted to help you!

  Please consult the following document and let me know how it goes:

  HP PC - Troubleshooting wireless network and Internet (Windows 10)

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Wireless not working and from "diagnostic policy service" gives error 1053

  Hello

  I have a problem with the connection to wireless internet. The router is working because I can get online to other computer and iphone. The question seems to be from my laptop.

  Laptop: Sony Vaio VPCEA
  Windows 7 Home Premium

  I was able to connect to the wireless using this laptop last night, but today in some sort it has stopped working. When I try to connect it says "restricted access". I have tried rebooting, removing the memory and of course Google wireless network, but nothing seems to work.

  When I tried to solve the problem, it says "diagnostic policy service does not work. So I went into Services and tried to turn it on (START) "Political diagnosis Service" but it gives me "error 1053: the service has failed to demand launch or control in a timely. I read online to install .net Framework 1.1 service Pack1 to get rid of this problem. But which is not supported by Windows 7, the more I installed 4.0 Framework, which should have taken care of this problem.

  Another suggestion is to disable the firewall and I noticed that my firewall is already turned off and I can't turn it on. I had the external anti-virus software, which I removed for this problem, but nothing works! When I tried to turn on the Firewall Services' Windows I get an error 1068: the dependency service or group could start. Dependence are: Base filtering engine and Windows Firewall authorization driver. Who do not start.

  I tried fixing the registry using the Wise Registry Cleaner. Clean something, she has not fixed any problems yet.

  Help, please. I'M FRUSTRATED!

  Thanks in advance!

  Hi bberringer,

  The original message has been able to resolve error 1053 by reinstalling Windows. If you have not reinstalled Windows, I would say the following steps before you spend money on the circuit board. If you already try reinstall Windows and always have failed, I suggest the internet search (or the site of the manufacturer if your computer is a Dell, Acer, HP, etc.) for the same or a Platinum compatible as prices can vary according to your computer brand and model.

• ProBook 650 1: Wireless not working not not on 1 650

  Wirelless does not work, drivers for BCM20702AO AND universal host controller serial are mandatory, I downloaded the drivers several times already, but not joy, I ran the recovery dvd for ProBook 640-650G 1 application and driver but I still have this problem, the operating system is win 7 pro 64 bit, thanks

  Hello:

  You need these drivers...

  USB 3.0:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5405142&swItemId=ob_128883_1&swEnvOid=4059

  Bluetooth:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5405142&swItemId=ob_132205_1&swEnvOid=4059

• Wireless not working not not after having reinstalled windows7_HP pavilion DV7-4080us

  Help need pleeease!

  I just reinstalled windows 7 (64-bit) on my laptop, but after reinstalling, my wireless is working.

  could someone help? Please ~ ~

  Rita

  Hi, Rita:

  Have you installed the driver for the wireless card?

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-95429-1&cc=us&DLC=en&LC=en&OS=4063&product=4230588&sw_lang=

• Wireless not working not not after installing the new windows 7

  my laptop is g6 Notebook PC Pavilion
  After that I installed windows 7 I noticed that wireless works not when I push the button its idle... nothing happens
  I know that I have to install a driver but I really don't know what is the right driver for my laptop
  
  Please help me thank you

  Hello

  Please try:

  http://ftp.HP.com/pub/SoftPaq/sp57001-57500/sp57434.exe

  Kind regards.

• Qualcomm wireless update and now wireless not work grrrrr

  Today, HP said that it is an important update for my wireless adapter and did an update via the HP Support and now have a red triangle with a! inside her and now my wireless died refuses to find any wireless router and the failure of any attempt to make it work.

  Name of product: notebook PC HP Pavilion g6

  Product number: C6M50EA #ABU

  8.1 Windows 64-bit

  Qualcomm-Atheros Driver Installation Program - Qualcomm-Atheros - 10.0

  Qualcomm Atheros Extensible Wireless LAN device - Qualcomm Atheros Communications, Inc. driver.  -10.0.0.264

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01 hardware ID

  Any ideas how can I fix?

  Thank you for the information. Based on this information, I have a few troubleshooting steps more than I can suggest:

  1. I would like you try ping on your router. Information on how to perform this task are described here: How to Ping the router of network Windows.

  2 take note if there is no packet loss, or if you are able to accomplish this task.

  3. Once this is done, I would like to that use you HP Support Assistant to test the capabilities of this computer network. To do this:

  -Open HP Support Assistant and click on "Internet and security.

  S ' ensure you are on the Internet tab, then click on "HP network Check."

  -It can generate a confirmation screen; Simply click "Next".

  -This diagnosis checks certain conditions and variables. Ultimately, results will be posted. Please take note of any errors and the potential causes (you can click the arrow next to root causes for more information).

  I need this information if the problem is not resolved. As an additional troubleshooting step, I suggest that you perform a system restore. I say this because you said that the problem occurred after an update. For more information about how to perform a system restore, please see this Microsoft Web site: How to refresh, reset or restore your PC

  Please note: a system restore will return the computer to Windows 8. While in Windows 8, all of your Windows updates and install all the necessary drivers (drivers Windows 8 on this computer are found here: drivers PC laptop HP Pavilion g6-2213sa). Please check if the computer can connect to a wireless network at this point.

  Once you have verified this, you can return to the 8.1 Windows computer if you wish. Please provide all your results.

  Mario

• Wireless not working with Vista Business/company, but will be with 7?

  I have a HP Pavilion Dv6700 laptop and my product number is FE654UA #ABA

  I got the computer and it had Vista, but my school has offered free Windows 7 OS so I downloaded and installed Windows 7 Ultimate 64 bit on the laptop. However, after discovering that I have to update all my drivers and find the latest versions are only for Vista, I chose to go back to Vista so I downloaded the Windows Vista Business 32-bit with Service Pack 2 my school offered the aftering having no success with the company. I formatted my HDD and installed Vista Business.

  Now, the problem is that after I installed Windows Vista Business my wireless switch turn blue even in position one. With this, I can't find any of my home wireless network signal and are the only options allotted to me for internet via dial-up or broadband. Wireless Assistant is 'Disabled' and unable to be activated.

  I also noticed that there is no network adapters in the Device Manager list.

  While running Vista business I went to the HP site and downloaded all the drivers of network I could and put them on a disc, so I could their spear on the laptop, but this did nothing no more.

  Despite this dilemma with Vista, everything works, how it should after reinstallation of Windows 7 Ultimate 32 bit, but I'm unable to update my drivers in this State.

  Hello:

  Now that you can connect to the internet, run the Windows Update program and let it download and install Windows 7 drivers that it finds.

  For everything else, you need to use the Vista drivers.

  Your laptop is not supported by HP for Windows 7, this is why there is no W7 drivers on the support page.

  I have a dv6810us with W7 Home Premium 64-bit.  It works fine using the combination of Vista and W7 drivers.

  Make sure you just as if you have not updated your BIOS to version Windows Vista, you DO NOT Flash the BIOS, now that you have installed Windows 7, or you will be clean your laptop, with no way out.

  Paul