Wireless receiver USB11 v2.8 has the hiccups

Hello!

I use my B of Linksys 2.4 GHz 802 wireless network card. 11b USB on my desk for well over a year without incident. Before that I used it on this desktop computer it worked smoothly with my another desktop as well!

A week ago my google chrome crashed, and my wireless network appears to be defective. After running through the range of diagnoses and fixes for the router and the computer (including disconnecting the wireless receiver and in him plugging) everything is in order, except my connection hiccups on a regular basis - in other words, the connection is interrupted briefly and then restores itself.

I don't know if it is a question, or the original question has come and gone, and my attempts to correct them, he created another separate question, these persistent hiccups.

I found that on my list of device, the wireless receiver is listed as an UNKNOWN DEVICE in need of troubleshooting; It says "Driver is not available." Try to find and install the driver of windows troubleshooting failed; Come to this site, I tried to download and install the driver manually, but he said that no firmware/driver download is available.

Troubleshooting carry this message:

Sorry, the unit is too old and Linksys pulled the firmware.

If you do not have the original disk Linksys that might have a copy of the firmware or a registered version, you will need to replace the unit.

Tags: Linksys Routers

Similar Questions

  • How to use Microsoft wireless receiver 700 v2.0 on the Mac book?

    Hello

    I have been using the Microsoft Wireless 700 receiver v2.0 on my laptop of Lenovo X 68 and docking station with WinXP for several years. I am in the process of upgrading to a Macbook Pro and would like to know how I can get this wireless keyboard/mouse to work on the Macbook.

    Thank you

    Kitenge

    Hello

    Make sure you have the right software for devices

    http://www.Microsoft.com/hardware/en-us/downloads

    If you are having problems using this troubleshooting

    http://support.Microsoft.com/kb/838398/en-us

  • XBox wireless receiver pilot (xusb21.sys) has stopped working properly.

    has stopped working
    correctly.

    Hi Dee,

    When you say "xusb21.sys" which is the source of the error?

    To resolve this issue, try the following steps:

    a. right click on my computer.

    b. go in Properties.

    c. click on Device Manager.

    d. right-click on the unidentified device.

    e. go to Properties.

    f. click on the Driver tab.

    g. click on Update driver.

    h. Browse my computer for driver software.

    f. Let me pick from a list of device on my computer drivers

    g. Windows common controller for window class Xbox 360 receiver wireless for Windows Version: warning ###Update. Click on Yes.

    Check the status of the question now.

    Also, please refer to the section of the solution of this link.

    Please come back with the results of the given suggestion.

  • My Turtle has the hiccups?

    After completing the level 2, I found myself with two white frames, so I deleted the first. I wonder if the layer 1 should be transparent? e 1

    Movement of the turtle is little choppy?

    My Second Turtle_1.gifTurtle Layers.jpgTurtle Frames.jpg

    Delete it.

  • Sync problems Xbox 360 wireless receiver for Windows and the controller (Windows XP, SP3)

    I'm having trouble connecting my controller to the wireless receiver. I use XP, Service Pack 3, 32-bit. I read dozens of help sites for help, but none has my same circumstances. The most common suggestion was to look at the driver for the receiver appears as a device not recognized. I checked the Device Manager and the receiver is recognized and does not appear as device not recognized. My controller does not appear in Device Manager as a new group named Microsoft Common Controller for Windows class, on Xbox 360 Controller for Windows. My controller syncs perfectly with my console, and functions very well also. I also downloaded the file Microsoft Xbox 360 accessories of the Microsoft hardware Web site, such as recommended by many establishments but do not know how file functions. A last help, my receiver is genuine and not fake with the XBCD holographic logo.

    Hello

    See the link to the Xbox support forums:

    http://www.Xbox.com/en-us/forums

  • In outlook express when receiveing an email he has highlighted in the email and opens the content. How can I stop it opening in case there is a virus.

    In outlook express when receiveing an email he has highlighted in the email and opens the content. How can I stop it opening in case there is a virus. I want to delete something which I think is a problem. I can't find a way to stop this. I want to double click to open only e-mail I recognize

    original title: outlook express 6

    Go to view | Layout and turn off the preview pane.  You can then double-click to open it.

    Steve

  • How to install logitec mouse wireless receiver and the software driver CD?

    How to install logitec mouse wireless receiver and the software driver CD?

    http://www.Logitech.com/index.cfm/support_downloads/&CL=us, fr.

    There is a link on the site above to contact Support Logitech technique.

    See you soon. Mick Murphy - Microsoft partner

  • IE9 would freeze to the top and then my internet wireless receiver disconnects. Why is he doing this and how to fix it?

    I would be online and then it would freeze shortly after disconnects my internet wireless receiver and I don't have to connect again. But I don't think it's the wireless receiver since it is new.

    Hello

    1. have you made changes on the computer before this problem?

    2. What is the brand and model of the computer?

    3. do the Internet disconnected only when you use Internet Explorer or does it happen with all

    4. have you contacted your ISP on this issue?

    Method 1: You can temporarily disable the security software and check...

    Turn off the Antivirus software
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: If this does not help, start the computer in safe mode with networking Mode and check.
    Start your computer in safe mode
    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    If the Internet works fine in Safe Mode with network, then I suggest you to perform a clean boot and check if any third-party application is causing this problem.

    Put the computer to boot and check if you can play the game:
    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, place k the computer to boot to the normal startup.

    Method 3: If the problem only occurs when you use Internet Explorer, I suggest to optimize Internet Explorer and check.

    How to optimize Internet Explorer
    http://support.Microsoft.com/kb/936213/no
    WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

     

  • enquery for wireless router which has the support of UPnP2.0

    I am looking to buy a wireless router that has the ability to UPnP and conforms to the standards of the IGD 2.0. PL you can help me help what model of Linksys router has this feature built-in.

    Model of router E4200 of Linksys compatible 2.0 of the IGD.

  • Xbox controller will not connect to the xbox wireless receiver?

    I got my Receiver to finally work and now when I try to connect my controller that do not access, it just flashes continuous four lights repeatedly. How can I fix it?

    Hello

    Welcome to the Microsoft community.

    Of your posts that I understand that you are facing issues connect the Xbox controller for Xbox wireless receiver.

    Have you tried to use the controller on a different computer?

    You can see the steps from the following link and check if it works:

    Xbox 360 Wireless Controller disconnects or unable to connect

    http://support.Xbox.com/en-us/Xbox-360/accessories/wireless-controller-disconnects-frequently-or-cannot-connect

    Reference:

    http://support.Xbox.com/en-us/games/Xbox-controller-for-Windows-Info

    You can also contact Xbox support team for assistance:

    http://support.Xbox.com/en-us/contact-us?XR=footnav

    It will be useful.

    If you need assistance on questions regarding Windows, let us know and we will be happy to help you.

  • I received a message which reads "the product key you entered has been blocked the use of Microsoft. I bought the original Windows 7 Professional SP1. Why do I get this message?

    Hello
    I received a message which reads "the product key you entered has been blocked the use of Microsoft. I bought the original Windows 7 Professional SP1 a year ago. Now, I get this message. What is the reason?

    Where did you bought it?

    Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
    http://go.Microsoft.com/fwlink/?LinkId=52012

    Have you tried to restart by phone?

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • When I try to access the Bluetooth program, receive error message: "Windows has stopped this program due to a Code 43 error.

    Original title: Code43 error (built-in) Bluetooth

    I have a new laptop (vaio) when I try to access the Bluetooth program I received information that Windows has stopped this program error Code 43

    that I understand not as a problem to update. I am running Windows7 Home Premium SP1. All solutions? (outside the deactivation, which I did. I realized the usual remedies IE. checked for driver updates, uninstalled and restarted without result

    Hi DerekWilliams,

    What is the brand and model of your system?

    You can try the following steps and check if it helps:

    Method 1:

    Try to run the corner hardware store and check the issue.

    Convenience hardware store

    For more information, see the article:

    Code 43: Windows has stopped this device because it has reported problems

    Method 2:

    You can refer to the computer or the device manufacturer's Web site and try to install the latest version of the Bluetooth drivers:

    For more information, see the articles:

    Updated a hardware driver that is not working properly

    Update drivers: recommended links

  • MD101LL/A + 2SSD + 16 GB of ram with the hiccups

    Hello ladies and gentlemen!

    Unfortunately my MacbookPro 13 "mid-2012 last only two years without any problem. I was more than satisfied with the purchase and modification of the Windows system and was amazed by the reliability that this computer can give you. When I bought it I also bought 16 GB RAM Kingston and asked the Apple dealer to install it. Year later, I bought the Samsung 850 PRO 128 GB SSD and put second life in this machine. Everything worked well, and by "working", I mean the intensive use of Photoshop, Lightroom, Illustrator, InDesign and same first also connected to monitor the second.

    After you install Yosemite, I started having some minor problems with sudden restarts and so on, nothing special when you're used to Windows machines. A few months later, I started having the problem with multicolored stripes on the screen who proposed the GPU problem or the motherboard. They showed only successive, especially on a very intense use. Then I went to the Iceland carrying my mac in the backpack I used to do on other trips. For 10 days, when MacBook was not connected to the secondary monitor, everything was fine. When I came back the problem began to occur more often at the point when I wasn't able to use the laptop more because he gave me only three annoying sounds and restart. I discovered that probably it's dying motherboard.

    I sent the MacBook to the Apple reseller and they cleaned the motherboard of every kind of moisture or rust might be, they have changed the two cables, run all this fancy diagnostics and my laptop was like new again. Everything started working. At least that's what I heard on the phone. When I arrived to pick up the consultant has started to show me how it works and then BAM! Scratches on the screen again! You should see his face!

    It turns out that when he holds the laptop with one hand, pressing the left side of the touchpad seeds present! Conclusion: problem with memory. The location of the bottom to be exact. Superior was beautiful, no matter what sticks of RAM, we used. The bottom has always been a failure. So I was left with only 8 GB of RAM and the upgrade of an another SSD instead of the Cd-ROM-Samsung 850 EVO 500 GB SSD.

    This configuration has worked quite fine, BUT from time to time, he showed a kind of hiccup that now are my daily problem...

    Please, watch the video below and tell me what the * is still happening?

    https://youtu.be/CMNX8esMBiU

    (ofc I know check slows performance, but it has the same appearance when the only recording not)

    TECHNICAL SPECIFICATION:

    Safari extensions installed yesterday while they is not serious

    No current in the Console kernel panic

    Yosemite 10.10.5 (14F27)

    BANK 0 / 8 GB 1600 MHz DDR3 RAM Kingston

    BANK 1 / no

    SAMSUNG SSD 850 PRO 128 GB / available: 48,85 GB / only for the system, applications and documents

    SAMSUNG SSD 850 EVO 500 GB / available: 14.59 GB / hiding of lightroom, all heavy, backups files

    ETRECHECK:

    EtreCheck version: 2.6.6 (226)

    Report generated 01/06/16 13:34

    Time 02:00

    Download EtreCheck from http://etrecheck.com

    Click on the links [click for support] to help with non-Apple products.

    Click on the links [click for more details] for more information on this line.

    Hardware Information: (Does that mean?)

    MacBook Pro (13-inch, mid-2012)

    [Click for plug technique]

    [Click here for the User Guide]

    MacBook Pro - model: MacBookPro9, 2

    1 2.5 GHz Intel Core i5 CPU: 2 strands

    8 GB of RAM expandable

    [Click here for upgrade instructions]

    BANK 0/DIMM0

    OK 8 GB DDR3 1600 MHz

    BANK 1/DIMM0

    Vacuum

    Bluetooth: Good - transfer/Airdrop2 taken in charge

    Wireless: en1: 802.11 a/b/g/n

    Battery: Health = Normal - Cycle count = 555 - SN = 9G2280LMND3NC

    Video information: (Does that mean?)

    Graphics Intel HD 4000

    Color LCD 1280 x 800

    DELL U2412M 1920 x 1200

    Software: (Does that mean?)

    OS X Yosemite 10.10.5 (14F27) - since the start-up time: 13 hours

    Disc information: (Does that mean?)

    SAMSUNG SSD 850 PRO 128 GB disk0: (128,04 GB) (Solid State - TRIM: Yes)

    EFI (disk0s1) : 210 MB

    HD (disk0s3) [recovery] recovery: 650 MB

    System (disk2) /: 126,84 GB (48,83 GB free)

    Encrypted AES - XTS unlocked

    Storage of carrots: disk0s2 127,18 GB Online

    SAMSUNG SSD 850 EVO 500 GB disk1: (500,11 GB) (Solid State - TRIM: Yes)

    EFI (disk1s1) : 210 MB

    Boot OS X (disk1s3) : 134 MB

    Data (DIS3) / Volumes/data: 499,41 GB (14.59 GB free)

    Encrypted AES - XTS unlocked

    Storage of carrots: disk1s2 499.76 Go online

    USB information: (Does that mean?)

    NOVATEK USB keyboard

    Logitech USB-PS/2 optical mouse

    Apple Inc. FaceTime HD camera (built-in)

    Apple Inc. Apple keyboard / Trackpad

    Computer, Inc. Apple IR receiver.

    Apple Inc. BRCM20702 hub.

    Apple Inc. Bluetooth USB host controller.

    Lightning information: (Does that mean?)

    Apple Inc. Thunderbolt_bus.

    Guardian: (Does that mean?)

    Mac App Store and identified developers

    Kernel extensions: (Does that mean?)

    / System/Library/Extensions

    com.Wacom.kext.pentablet [no charge] (5.3.6 - 10.9 SDK) [click for support]

    Startup items: (Does that mean?)

    TuxeraNTFSUnmountHelper: Path: / Library/StartupItems/TuxeraNTFSUnmountHelper

    Startup items are obsolete in OS X Yosemite

    Launch system officers: (Does that mean?)

    com.apple.CallHistoryPluginHelper.plist [killed]

    com.apple.CallHistorySyncHelper.plist [killed]

    com.apple.EscrowSecurityAlert.plist [killed]

    com.apple.Maps.pushdaemon.plist [killed]

    com.apple.SafariCloudHistoryPushAgent.plist [killed]

    com.Apple.cloudphotosd.plist [killed]

    com.Apple.CoreServices.appleid.authentication.plist [killed]

    com.Apple.icloud.fmfd.plist [killed]

    com.Apple.photolibraryd.plist [killed]

    com.Apple.telephonyutilities.callservicesd.plist [killed]

    [loading] com.paragon.NTFS.notify.plist [click to support]

    10 killed process lack of RAM

    Launch system demons: (Does that mean?)

    com.Apple.awdd.plist [killed]

    com.Apple.ctkd.plist [killed]

    com.Apple.ifdreader.plist [killed]

    com.Apple.nehelper.plist [killed]

    com.Apple.softwareupdated.plist [killed]

    com.Apple.wdhelper.plist [killed]

    6 killed process lack of RAM

    Launch officers: (Does that mean?)

    [loading] com.adobe.AAM.Updater - 1.0.plist [click to support]

    [operation] com.adobe.AdobeCreativeCloud.plist [click to support]

    [loading] com.oracle.java.Java - Updater.plist [click to support]

    [loading] com.paragon.updater.plist [click to support]

    [operation] com.wacom.pentablet.plist [click to support]

    Launch demons: (Does that mean?)

    [operation] com.adobe.adobeupdatedaemon.plist [click to support]

    [loading] com.adobe.agsservice.plist [click to support]

    [loading] com.adobe.fpsaud.plist [click to support]

    [loading] com.klieme.TMSHelper.plist [click to support]

    [loading] com.klieme.TimeMachineScheduler.plist [click to support]

    [operation] com.klieme.TimeMachineScheduler.wake.plist [click to support]

    [loading] com.noatime.root.plist [click to support]

    [loading] com.oracle.java.Helper - Tool.plist [click to support]

    [loading] com.oracle.java.JavaUpdateHelper.plist [click to support]

    [loading] com.rockysandstudio.WUHelper.plist [click to support]

    User launch officers: (Does that mean?)

    [loading] com.adobe.AAM.Updater - 1.0.plist [click to support]

    [loading] com.adobe.ARM. [...]. plist [click for support]

    [loading] com.google.keystone.agent.plist [click to support]

    [operation] com.spotify.webhelper.plist [click to support]

    [loading] com.valvesoftware.steamclean.plist [click to support]

    Items in user login: (Does that mean?)

    WD Quick View Application (/ Library/Application Support/WDSmartware/WDQuickView.app)

    Other applications: (Does that mean?)

    [loading]    QA2G25RMZ4.com.Wunderkinder.Wunderlist - helper

    [ongoing] com.adobe.Lightroom5.19912

    [operation] com.adobe.acc.AdobeDesktopService.85800.C8DB8C27-B43E-4D2C-9DCC-BB991669AA97

    [ongoing] com.Adobe.accmac.46040

    [ongoing] com.Apple.XPC.launchd.oneshot.0x10000012.Spotify

    [ongoing] com.Apple.XPC.launchd.oneshot.0x10000016.EtreCheck

    [ongoing] com.google.Chrome.26444

    [ongoing] com.wacom.ConsumerTouchDriver.84948

    [ongoing] com.wacom.TabletDriver.85516

    [ongoing] com.wdc.wdquickview.84096

    Plug-ins Internet: (Does that mean?)

    AdobeAAMDetect: Version: 3.0.0.0 - 10.9 SDK [click for support]

    FlashPlayer - 10.6: Version: 20.0.0.267 - 10.6 SDK [click for support]

    Default browser: Version: 600 - SDK 10.10

    AdobePDFViewerNPAPI: Version: 11.0.13 - 10.6 SDK [click for support]

    AdobePDFViewer: Version: 11.0.13 - 10.6 SDK [click for support]

    Flash Player: Version: 20.0.0.267 - 10.6 SDK [click for support]

    QuickTime Plugin: Version: 7.7.3

    Silverlight: Version: 5.1.30514.0 - 10.6 SDK [click for support]

    JavaAppletPlugin: Version: 31 to check the version of Java 8 update

    Safari extensions: (Does that mean?)

    Facebook cleaner

    WOT

    SafariRestore

    EverNote Web Clipper

    Save in the Pocket

    SessionRestore

    Turn Off the Lights

    3rd party preference panes: (Does that mean?)

    Flash Player [click for support]

    Java [click for support]

    MacFUSE [click for support]

    NTFS - 3G [click for support]

    Paragon NTFS for Mac® OS X [click for support]

    Tuxera NTFS [click for support]

    Tablet chart [click for support]

    WDQuickView [click to support]

    Time Machine: (Does that mean?)

    Mobile backups: OFF

    Automatic backup: NON - automatic backup disabled

    Volumes to back up:

    Destinations:

    TimeMachineBackup [network]

    Total size: 1.98 TB

    Total number of backups: 0

    An older backup: -.

    Last backup: -.

    Size of backup drive: Excellent

    Size of backup TB 1.98 > (disk size 0 B X 3)

    Top of page process CPU: (Does that mean?)

    12% WindowServer

    12% com.apple.WebKit.WebContent (21)

    11% kernel_task

    5% adobe CEF Helper (3)

    4% spotify Helper (2)

    Top of page process of memory: (Does that mean?)

    Com.apple.WebKit.WebContent (21) 2.30 GB

    Kernel_task 975 MB

    180 MB Spotify Helper (2)

    115 MB Adobe Photoshop Lightroom 5

    Safari of 115 MB

    Virtual memory information: (Does that mean?)

    19 MB of free RAM

    7.98 used GB RAM (865 MB Cache)

    1.95 GB used Swap

    Diagnostic information: (Does that mean?)

    January 6, 2016, 01:09:24 ~/Library/Logs/DiagnosticReports/Adobe Photoshop Lightroom 5_2016-01-06-010924_ .crash [deleted]

    January 6, 2016, 12:03:58 AM /Library/Logs/DiagnosticReports/com.apple.AmbientDisplayAgent_2016-01-06-000358 _ [redacted] .crash

    January 6, 2016, 12:03:27 AM self-test - spent

    January 5, 2016, 11:13:23 ~/Library/Logs/DiagnosticReports/Notes_2016-01-05-111323_[redacted].crash

    January 5, 2016, 12:30:49 AM [redacted] ~/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-01-05-003049_ .crash

    January 4, 2016, 12:47:23 AM ~/Library/Logs/DiagnosticReports/Electron Helper_2016-01-04-004723_ [redacted] .crash

    Ashes of /Library/Logs/DiagnosticReports/PenTabletDriver_2016-01-04-000858_[redacted].cr 4 January 2016, 12:08:58 AM

    January 4, 2016, 12:08:49 AM /Library/Logs/DiagnosticReports/Kernel_2016-01-04-000849_[redacted].panic [click for more information]

    27 December 2015, 16:03:08 /Library/Logs/DiagnosticReports/Kernel_2015-12-27-160308_[redacted].panic [click for more information]

    16 December 2015, 14:52:58 /Library/Logs/DiagnosticReports/Kernel_2015-12-16-145258_[redacted].panic [click for more information]

    8 December 2015, 14:43:20 /Library/Logs/DiagnosticReports/Kernel_2015-12-08-144320_[redacted].panic [click for more information]

    Lack of RAM is hurt your performance based on the number of swaps.  Have you determined that the one RAM slot is defective or a RAM module has been/is perhaps the problem.

    Check if you have the panics of the kernel in you library.  If so, use these instructions to record and post a:

    https://support.Apple.com/en-us/HT201753

    Ciao.

  • SK2061: The wireless keyboard will not connect when the PC is turned on.

    My problem is, when I start the PC, (HPK-15 500, 319NA), wireless (SK2061) keyboard, does not connect. I have to shut down the PC so he can connect (no restart, you must stop it).  Have had the PC for 5 months and it has been published. Not changed the battery makes no difference.

    The internet statement States I shoud push the blue button until the USB receiver flashes. This PC does not have an external USB receiver, I guess it's built in! The mouse works OK.

    Hello @JimCar82,

    I read your post on how the wireless keyboard will not connect when the computer is turned on, and I'd be happy to help you in this case!

    Re-connect your keyboard to your desktop computer wireless, I advise you to follow the steps described in this document on the keyboard and wireless mouse troubleshooting. The USB receiver should be found at the back of the tower.

    Please re-post with the results of your troubleshooting, and I look forward to your response!

    Concerning

  • WARNING: another computer has the same IP address on this computer.

    Original title: another computer has the same IPaddy on this computer. I received your warning. What can I do to stop this?

    I saw a warning you that there is another computer that I have Paddy as this computer (mine). What is that it appeaedn I do to prevent this? Does that mean that someone is on my private etc. messages. ? Thank you. He has appeared in your Windows system event log. Isabel Q. padlock

    Hi Gabriel,

    You can try these steps and see if it helps.

    Step 1:

    You can try to run the network troubleshooter, and see if it helps.

    Windows wireless and wired network connection problems

    Step 2:

    Manually, you can release and renew the IP address of the client as follows:

    a. Click Start and type cmd and right click on cmd and select run as administrator.

    b. type ipconfig/release, and then press ENTER.

    c. type ipconfig / renew and then press ENTER.

    Hope this information is useful.

Maybe you are looking for