with a Wi - Fi access point

Similar Questions

• Diagnostics Windows network, the error reads 'Problem with wireless adapter or access point' and fails to solve the problem.

  «Problem with access point or wireless adapter»

  Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria

  HI Maria,

  ·         What operating system is installed on your computer?

  ·         You have installed the latest drivers for wireless network card?

  Follow the suggestions below for a possible solution:

  Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: See these articles for solve wireless problems:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if that helps.

• Unable to connect to Wi - Fi network - 'problem with wireless adapter or access point '.

  When I try to connect to the network Wi - Fi Home I get error like:- Windows cannot connect.

  When I click on solve problems I see error below :-'problem with wireless adapter or access point '.

  We reinstalled OS

  We rested the router

  We are able to connect to Wi - Fi in other laptops, notebook and mobile

  We have updated all the drivers of network also.

  Please help me solve the problem.

  Hi Niranjan,

  Thank you for your support. In fact, the problem is with the Router Configuration, because with any other router device, we are able to connect to Wi - Fi in the laptop.

  Thank you

• Unable to connect to wireless internet with error message: "problem with wireless adapter or access point.

  Original title: I am trying to connect to my WiFi.

  I am trying to connect to my wifi but it keep saying there is a "problem with wireless adapter or access point. I tried the steps that he told me to do but still no help.

  Hello

  Thanks for posting your question in the community of Microsoft Windows. I understand that you are facing problems with your wireless internet connection. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2. What is the brand and model of the computer?

  Method 1:

  Follow the steps in the link below.

  Of connection problems in Windows wireless and wired network: http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Follow the steps in the link below.

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 3:

  Follow the steps in the link below.

  How can I troubleshoot network card? :

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Latest drivers Atheros does not help with hotspot WiFi (or access point)?

  I updated the drivers from v7.7.0.288.0. It's the latest and probably the last pilot found in archive of drivers for the A200 support.

  I set up my WiFi Atheros in usual manner of Vista. The steps are described in most PC portals for the creation of an access point WiFi in Windows Vista.

  1 Control Panel
  2 network connections and sharing
  3. ad-hoc creation, the SSID, password etc.
  4. share the internet connection button.
  5 allow to other users on the network to use my internet
  6 access point is created and Windows indicates that the signal is "Excellent".

  Everything is simple and straightforward but my Android smartphones don't detect access point.
  So what is the fault?

  Driver details dated 03/09/2009 in the Page of Support Toshiba informed that the update of the wireless Lan driver is to 'connect to your wireless access Point or to another PC wireless using your wireless network card.

  [driver | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 8 & selFamily = 192 & selSeries = 236 & selProduct = 725 & STAS hortMod = 518 & language = 13 & selOS = 26 & selType = 97 & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 97 & page = 1 & ID = 54134 & DISO = 26 & driverLanguage = 42]

  COMPUTER geeks report that my Atheros AR5007EG is able to create the gateway under Win7. I think in the same way, it should work with Windows Vista SP2.

  http://www.itgeekdiary.com/Windows-7-as-an-Wi-Fi-access-point/

  I tried other portals Windows but all of them describe the same steps by creating ad hoc to access Windows Vista point.

  Any help is appreciated.

  Kind regards.

  Thanks for the comments!

• Problem with SG-200 and access point on VLAN

  I'm having some problems with the configuration of VLANS on the SG-200 and the WiFi access point. The access point (a TP-Link WA801N) is able to access the internet when it is plugged into a port that is on the default VLAN (1 PVID). If I plug it into one of the other VLAN then all clients connected to WiFi to lose access to the internet and can not access on the local VIRTUAL network devices. I've used this configuration with a Cisco WAP4410N of first generation.

  I'm not sure if it's something wrong with the way I configured the switch or a problem with the access point.

  The setup I have is:

  Modem/router ADSL (7800N billion)

  |

  -------------------Port 1--------------------

  |                                               |

  |               SG-200 08 |

  |                                               |

  ---3---port 8 - port

  |                    |

  Access point |

  (TP-Link WA801N).

  |

  SF - 100 D

  The port configurations are

  Port Mode PVID membership

  1 general 1 1U, 7U, 666U

  2 general 1 1U, 7U, 666U

  3 general 7 1U, 7U

  4 General 7 1U, 7U

  5 General 7 1U, 7U

  6 General 7 1U, 7U

  7 general 1U 666, 666U

  8 General 1U 666, 666U

  Iain,

  You have virtual local networks put in place on your router? The subnets that you use on each vlan? The router will give DHCP for each vlan?

  The SG200 isn't a fully managed layer 3 switch, it's just a "smart switch" so you can not actually be able to do simply only switch. A sg300 mode layer 3 would be able to do this because it is a fully managed switch.

  If the router is configured with the VLAN, vlan 1 unidentified, the rest the tag, the router-> SG200 port is trunking and the others as access ports on their vlan respective. Once the router is configured, this video contributor forum albums and Cisco employee David Hornstein is very useful to correctly configure the switch.

  Best,

  David

  Please evaluate the useful messages.

• Unable to connect via the wireless router "problem with wireless adapter or access point" _

  Hello

  I recently replaced my old Toshiba laptop with a new model of Toshiba Satellite L500/033HNX, it installed Windows 7.

  The problem is that I can't connect to my wireless network. I am currently connected via Ethernet cable to my Linksys router.

  I had help from my internet service provider, the installation correctly the problem not because of the connection.

  I had a Linksys online support, the router is a wireless, model - WAG54G ADSL gateway, is not the problem of all the correct settings and other devices can connect via my wireless network. I ran Dr. connectivity several times and it is always impossible to connect, "problem with the wireless adapter or access point.

  OK, you're my next hope to solve the problem can you HELP Please!

  Hi, JoelbX
  I want to thank very you much for your support and effort do to help me solve this problem, but we receive have been, and I don't want to waste any more of your valuable time, so I am the son of closing and deleting of Tring in Microsoft Answers.
  All the best
  Tring

• What would be the performance of these two 802.11n, router 802.11 g/b, when they are opereate under the mixed mode router with wireless 802.11n access point?

  ·         Range is increased to 802.11n device

  ·         Speed will increase for 802.11n device

  ·         Autonomy and performance will be increased by all the devices (802.11n, 802.11 g, 802 11b)

  Hi Sandeep,

  I suggest posting this question using the link below:

  Windows 7 IT PRO / networking

  calculation of the happy,

  B Eddie

• Access Point WAP200 is compatible with the injector WAPPOE12?

  Hello!!!

  I want to bring the power of an Access Point WAP200. I need to know if the WAPPOE12 injector is compatible with this kind of Access Point.
  I deployed 108 AP WAP200 in a wireless network and I want to know what type of power injectors, I use in this set.

  Thank you!!
  Best regards, Carlos

  Hi cramosfors. The search of the forums I found this.

  http://homecommunity.Cisco.com/T5/access-points/WAP200E-with-WAPPOE12/m-p/204398/highlight/true#M798...

• Problem with internet access point

  Hello, I saw that this question was asked before, but has never seen a solution to my problem, I will explain:

  I have like 5 months with this problem. I have a TP-LINK 300Mbps Wireless N Router, model No. TL-WR841ND. The fact is that when I plug in my router to the Modem, my wireless network seems to work fine, but when I try to connect to my computer or any other device to the network (mobile phones, playstation 3, tablets, etc.), I am unable to do so. On my laptop, I get the message: 'Problem with wireless adapter or access point', but the most confusing thing is that sometimes I can connect to the Internet via my network wireless without any problem.

  This time I decided to post my problem, because I'm tired of it. Sometimes it happens, sometimes it doesn't. Right now, I have two days without Internet connection (Via router), because my modem works properly.

  PS: I have another router (Linksys) and I can connect to this network, but I want to solve my problem with the TP-Link because the signal is stronger. Help!

  See links.

  How to install a TP-LINK wireless routers (Recommended)?

  http://www.TP-link.com/LK/article/?faqid=92

  Why can I not access the Internet after connecting the TP-LINK router to my modem.

  http://www.TP-link.com/LK/article/?faqid=138

  TP-Link FAQ.

  http://www.TP-link.com/LK/support/FAQ/?keywords=TL-WR841ND

• With the help of new access points with old WLC 4100; LWAPP layer 2 switching 3-tier

  Hi all

  We currently use two solutions Wiresless LAN - a 10 AP1230 access points-based autonomous (5 years) and a solution based on a Cisco WLC 4100 (4112, running 3.2) with 12 AP1010 LWAPP access points.

  First thing, we are considering to replace the stand-alone solution with the WLC one. However, I'm not sure if we can use the new access points such as the LAP1041N or the LAP1252G with our current 4100 WLC. Access reported data sheets 'Cisco Unified Wireless Network Software Release 7.0 or later version' 'software '. Does this mean that these access points can only be used with controllers running 7.0 or later?

  If we are unable to use the new access points with our current WLC and need to buy a new controller: can we use access points AP1010 current with a new WLC as the Cisco 4402?

  Second thing, it is that we want to expand the networks configured on the WLC 4100 to another site that is connected via VPN wireless. Wireless Setup guide indicates that the LWAPP mode can be changed from Layer 2 to 3 layers so that the access points can be configured with an IP address, which allows you to place access points basically anywhere as long as IP connectivity exists between the AP and the WLC.

  Y does it as described in a document with the change of mode LWAPP layer 2 to 3 layers? Or ist just the following steps (if I understand correctly):

  -Change the Mode of Transport LWAPP on the controller of layer 2 to 3 layers

  -Creation of a PA-manager interface with an IP address in the same subnet as the management interface (tried that, without changing LWAPP mode transport first and not was not possible - error)

  With regard to different sites:

  -Configure option DHCP 43 with the IP address of the WLC or DNS with CISCO-LWAPP - CONTROLLER.localdomain

  -Make sure that the interface ap - manager can reach points on the different site

  Is it really just as simple as that? All information about it is very appreciated!

  / edit: I would also like to know if the 1260 series access point are backward compatible with 802. 11B. Whereas it is stated in 1040 and 1250 for example series data sheets, it is not particularly mentioned in 1260 data sheet.

  Thank you

  Michael

  Well, let's start with the simple question/answer

  With regard to different sites:

  -Configure option DHCP 43 with the IP address of the WLC or DNS with CISCO-LWAPP - CONTROLLER.localdomain

  -Make sure that the interface ap - manager can reach points on the different site

  Yes, it's as simple as that.

  As for other issues, looks like you would be better served with a forklift upgrade.  New controllers and new AP.

  Now, the AP 1230/1240/1250. all work on the 4.2, 1140 code starts with 5.2 and 1040/3500/1260 are 7.0

  The AP 1000 series is not supported after 4.2 code.

  Refer to here for the complete list of the AP and taken codes supported:

  http://www.Cisco.com/en/us/docs/wireless/controller/release/notes/crn7.0.html#wp610751

  From what I see, the 4100 is not supported after the train of 3.2.

  So, it really depends on what you are trying to accomplish with the upgrade.  If you are looking for a 80.211n support, you really want to be 5.2 or better, we had some problems with MRR + 40 Mhz channels, 4.2, 5 GHz band only.

• HP Officejet pro 8100 cannot wifi access point?

  Yesterday, my HP Officejet pro 8100 arrived and I try to connect via wifi. I thought that it need access to infrastructure to print via wifi.

  When I turned on the printer I osserved that he create a stand-alone gateway with SSID: HP-Setup-7 a-Officejet Pro with IPv4 server address, etc...

  I was very happy and I printed a page with my smartphone samsung s4 directly connected printer access point (no wifi direct wifi except standard).

  Has been held today has changed, but I can't use printer with its own point of access, but only with an external wifi access point.

  Can someone help me, please? It could be a hardware problem?

  Thank you

  Luca

  P.S. to the webserver I checked 'connectivity point of access' (di accesso instradamento wireless in Italian Punto) is checked.

  Hello lucait

  You are right that the Hp Officejet PRo 8100 is a single function printer which does not directly optional wireless. You can always do what you want to do, but you will need a router to connect the printer to a network, and from there you can use the network routers or set up the feature ePrint for your portable devices.

  I hope this solves your post. Thanks again for the display on the HP Forums. It has been a pleasure. Have a great day!

• new WRT54G2 access point see an Internet cable modem connection

  I probably set p 10 points of access router WRT over the years.

  Linksys actually used to have a phone number of direct support in the past.

  Anyway, I'll put up a new point of access (WRT54G2 V1.5) and went through all the steps, but the Internet connection was not detected during installation.

  I am borrowing a modem Optonline (CableVision) that I am/was with my Apple Airport access point, so I know that the Internet connection is good/live.

  Any help would be appreciated?

  Thank you

  Ralph

  After a connection has dropped with the Linksys Chat, after two hours, I understood where the technician of cat was directed and started messing around with MAC cloning. The problem was that I use on a daily basis an Apple Air Port Extreme and I have been putting just the Linksys router as a test before I sent it to a friend.
  None of the MAC addresses of all the computers I use does not work. Finally, I tried the MAC address using the Aple Air Port and then I had an Internet connection!

  Ralph

• Problem with access point or wireless adapter

  Hello world

  tried to connect to my WiFi, but the convenience store detects that the problem with access point or wireless adapter.
  The drivers are up-to-date and functioning normally. There were discussions on BIOS but I don't know if I would be able to complete the task without bricking your laptop.

  Is there any online support?

  Hi smert

  Your message is not really useful.
  Why? Because no one knows all the details of the laptop, wireless network card system...
  So please would you be kind enough to provide more details.

  But despite the missing information, I recommend:
  (1) reset your router WLan
  (2) check the connection to the WiFi unsecured. (of course for testing purposes)
  (3) check the different (WPA/WPA2 AES, TKIP) encryption

• WiFi HP ENVY 4500 with several Access Points - same SSIS Configuration

  Hello

  We just got a HP ENVY 4500.  I have a main homenetwork with a wifi Modem/Router and an old router acting as an Access Point to the floor to extend coverage.

  Both have the same SSID and password and are set to different channels.

  My HP ENVY 4500 fails to connect when the Access Point is lit.

  It will connect with it.

  Once connected, I can turn on the PA and all is well.

  The two router an AP using WPA-PSK/WPA2-PSK encriptación

  The router (that it connects to) should have a better sgnal when both are on, so I do not understand why they need the AP to be turned off to connect.

  Any thoughts people?

  Eserim

  I think he has always had problems with several access points.  Try this, what ever AP is closest to the printer, set it to channel 1.  Then try channel 11.  Try now.