with LCD projector broadcast traffic

Similar Questions

• Portege R500 - toggle the display of the laptop to LCD projector screen

  Hello - new here, urgent request. We have a meeting, and I use the Portege R500 for the first time with LCD projector which is also a Toshiba.

  How do the laptop screen display the projection screen? I thought it was function F5 (Fn + F5), but it does not work.

  Can anyone help?

  Hello

  Yes, you must use the FN + F5 to switch to the external monitor or external projector, etc.
  You must first connect the laptop with a projector, while both devices are turned off.
  After connecting the projector you could power the laptop.

  Then try to switch to external projector using the FN + F5 key combination

• The image of my Macbook Pro is upside down when projected through a LCD projector.  This isn't a problem of projector.  How can I fix it?

  When my new tri - LCD projectors installed office, they have been installed backwards so all images have been reversed.  Colleagues using Windows said they were able to operate their output with a few keystrokes, and somebody found one for my Macbook Pro (13-inch with screen Retina, end of 2012).  It wasn't so much a combination of keys, but a couple of dialog boxes have been opened and clicked a few things.  But it worked.

  Now, the spotlight have been rectified and colleagues using Windows have retoggled their laptops but can't remember how to reset my Macbook.  I think it's in the system preferences and screens, but I can't find anything either and link on the internet.  Help, please.

  Please press and hold the command-option key combination while clicking on the icon in the System Preferences window displays.

  ATTENTION: On some models, display rotation may cause the screen to go black. You can force a restart to recover.

• best technique for video playback through tri - LCD projectors

  I recently created a project of 15 minutes in CS4.  I burned to a DVD it and it plays smoothly on a computer and DVD player.  I had a room full of people and a laptop to play the DVD on the LCD projector and the video was stuttery - fast motion, motion to correct and vice versa.  It wasn't horrible, but I noticed it.  What is the best workflow for out highest qualtiy and better reading for projector?  I started with downsampled and HDV film he MPEG-DVD.  I customized the max 8 preset and target to 5.  Flash look and work better?  I don't know what brand and model, the projector was because it was mounted to the ceiling.  I noticed this problem once before on another projector, even laptop.

  Thank you

  Lisa

  The issue is most likely with your laptop to any part of your post production workflow.

  You may need a new laptop.

• Need help setting up with a projector.

  Hello
  I have a M30X & seem to be unable to set up for use with a projector. I can get it to show the theme of office & my pointer of the mouse on the projection screen, but nothing else. I don't see any program on the projection screen & I want to use it to make PowerPoint presentations. I tried all the basic tips including the wizard, but no luck! Help please.

  Hello Lizzie

  It's very strange that there is no possibility to see any program started on projector. As far as I know if PowerPoint contains some copy protected files, it is not possible to be shown.

• With Satellite Pro M-series LCD projector problems

  Hello

  I use a Toshiba Satellite Pro M series for more than a year. I would like an answer to a problem that I've had since I bought my laptop. When I use a LCD (beemer) projector to watch movies on the big screen, he seems to be a problem. When I choose to show my desktop on screen you there is no problem. When I open a video file, divx or just a DVD I can see the movie on the screen of my laptop, but I don't see on the projection screen. It is only black. When I choose the mode full screen, there is always the same prob. Very strange because when I chose the projector as 2nd screen and I slide the film into the second screen, I can see the movie on the projection screen. The only thing that I hate divx and mediaplayers readers when you select full screen on the second screen, the film jumps on the first screen (the one on my laptop). I tried all the codecs and other things. Nothing seems to work.

  Has anyone treats these problems before? Please let me know if anyone knows how to solve this problem.

  Kind regards
  Compton

  Hi refill,

  I thinnk it may be a driver configuration problem, but to solve it, I need to know what mobile phone do you use?

  Satellite Pro M?

  Also would be nice to know what operating system is runing (OS recovery or another image) and what version of driver display that you use!

  Goodbye Chris

• Need advice on the creation of a movie and a slide show to display with a projector

  I'll set up video and a slide show of photos for a meeting. I'll use the pictures of different sizes and quality. The projector is rented, so I can't practice with her, but I got the info about: 3 LCD, 1100 lumens, native resolution of 1024 x 768, 4:3 picture format, throw distance 5' 50 '. The audience will be about 100 people.

  I have created several movies with slideshows which have been engraved on DVD for viewing on a TV, but I never did anything for projection on a screen using my laptop. It is my understanding that reduce the photos to a reduced video resolution quality because no matter what the resolution of digital photography, the video output will be 720 x 480. Given that the quality of the photos old movie 126 and 110 are very cheap to start, I was wondering if they would be better if I could show using Adobe Photoshop Elements' slideshow featured on my laptop and then switch to showing a Premiere of the movie file?

  I learned from my mistakes of slide show of film when the TV cut heads (outside the margin of safety). I'm sure there are a few pitfalls when using a projector, but I don't know what they are. Those with experience of projector could give me some advice? Thank you very much.

  With the source VHS film, SD (720 x 480 NTSC) will be as good as you can get. With this video, I'd do a DV project.

  This ARTICLE will give you some tips on analog to digital, but sounds like you have covered, with your camera miniDV on pass through.

  Now, one possibility could be high-rez this SD material and use it in an HD project, to the specifications. of the projector. However, some heavy research. Not sure about several things: PrE will work with this program. It will allow to match this 720 p projector, etc. ? A red giant a program/plugin, Magic Bullet InstantHD. I don't know these answers.

  For me, I was watching just to make a scale of my stills and DV project to that. Obviously, the resolution will be less than max for the projector.

  Good luck

  Hunt

• Satellite A100178/Geforce Go 7300 problem with LCD resolution 1680 * 1050?

  Hello

  I have a Toshiba A100178 pc (PSAA9). My question is about a new LCD from NEC P221W, that has a native resolution of 1680 * 1050. However, I can't put this resolution on my Toshiba A100178 machine (PSAA9).

  I have attached a CRT SONY earlier unfolding at 1600 * 1200 with no problem at all.

  It appears a Geforce Go driver (7300) issue when I google it. Somehow has the "lost" pilot the resolution 1680 * 1050. I tried some older versions of the driver (such as 179,48 most recent NVIDIA, 84.68 website to download from Toshiba site) without any help, the LCD insists clocked at 1280 * 1024. It is the highest resolution in display--> settings properties. Surely I would run my LCD to its optimal resolution.

  I also tried NVIDIA Control Panel--> change the resolution and create a customerize resolution of 1680 * 1050, but nothing's happened there either. I can't just create such a resolution.

  Any idea please? Thank you very much for your help!

  Bob

  about the list of the above problems, the machine is set in mode dual display...

• RS 232 communication with a projector

  Hello! I work in communication with my prjector. The controls are pretty simple, just PWR it for OFF\r PWR to turn off and LAMP? How many hours have the lamp worked \r to land the aircraft. So I just used the example of the writing/reading series with labview, but had a few problems.

  1º) it works but it keeps giving me an error, I can't handle. Is the current operation of visa wait time. I tried it here and all the people say something on the lines of commands, but I put them and set up in the port, so I don't really know how to handle this error. Another thing, it is how can I put \r or 0xD for my end of just the default write command?

  2º) how can I make my request just be an exe that you don't have to press ' EXECUTE ' always to use it?

  3º) my last question is to ask questions about how to manage this thing, I need to read used with the control LAMP lamp hours?, and projector will answer me with something like: LAMP = xxx. How to handle this response to send it via TCP/IP? Should I have to create a new variable or something? I mean, I just need with another application in order to power switch of the projector via tcp/ip and calling hours of lamps via TCP/IP, so I don't really know how to handle. Thanks for all the peoples and let me know if you need more information, I'm not native English sorry for my mistakes.

  Edit: I forgot to put my vi.

  1. you will obviously get a timeout when you send the commands that do not generate a frequency of the instrument. Only do a reading when you send the LAMP? interview and to automatically send \r, set the stop to "0 D" character.

  2. you have the app Builder to create an exe file. In order to make the VI automatically running, go to the properties of VI > execution and check "run then '.

  3. I do not understand. First, you talk about RS - 232 and now you want to convert this TCP/IP communication VI?

• Troubleshoot the switch 12 with a projector or VGA monitor Acer

  I connected my Acer Aspire switch 12 to a VGA monitor via a HDMI VGA adapter microphone. The switch 12 sees the second monitor, but seems unable to get a signal to start it. In this respect also disables my wireless and sometimes the mouse as well. I tried the VGA monitor with my MacBook and it works perfectly.

  For me, it's a serious problem, I bought the switch to travel and give presentations in corporate meeting rooms, of which many are still equipped with legacy VGA projectors.

  As a low-power machine, is inherently impossible to connect to a monitor/projector VGA switch 12, or is the problem somewhere else?

  If I had to guess, I would say that the problem lies in the switching on of the conversion your HDMI cable VGA chip. I do not know the specs on the budget for food for the HDMI port, but it is probably marginal for the conduct of the conversion.

• Problems with lcd monitor

  I have an older comp with windows xp. I bought a new sony lcd with the intention to use it also for a super size moniter. I plugged with a RGB cable and was well at the first and soon my screen has a blue yellow cast. Thought is on TV so I exchanged it and the new one did the same. Any ideas?

  I have an older comp with windows xp. I bought a new sony lcd with the intention to use it also for a super size moniter. I plugged with a RGB cable and was well at the first and soon my screen has a blue yellow cast. Thought is on TV so I exchanged it and the new one did the same. Any ideas?

  One of the three things wrong:

  1. the monitor is defective.

  2. the video card is faulty.

  3. the cable linking the two is defective, or not tightly secured at both ends.

  Check the cable attachment being simpler, than the first.

• The configuration of the coast DMVPN speaks with higher bandwidth for traffic shaping

  Dear all,

  We have the unusual situation that on our sites talking DMVPN has a higher bandwidth (33 Mbps) that our

  DMVPN Hub Site.

  Therefore, we must apply to 10 Mbps on the interface of tunnel on the radius of traffic shaping.

  The following link describes only how to make an application in the form at the end of the hub, but not on the site of end spoke:

  http://www.Cisco.com/en/us/docs/iOS/sec_secure_connectivity/configuration/guide/sec_per_tunnel_qos.PDF

  How to proceed with this on the router spoke?

  Creating a service policy and applying then to the tunnel interface will do the job? Put in shape will be before or after encrypting the traffic?

  And then we would need to increase the buffer size of 1024 to something more replay window?

  The following example would work? We would apply the outbound policy to the Tunnel interface:

  class-map match-any CLASS_ANY

   match any 

  policy-map POLICY_SHAPE10MEG

   class CLASS_ANY

    shape average 10000000

  
  
  interface Tunnel 0
  
  service-policy output POLICY_SHAPE10MEG
  
  

  Thanks for your help,

  Thorsten

  I see on the hub strategy is applied successfully on the tunnel. The political POL_SHAPE10MEG is applied on the tunnel you wanted, this way the rays won't be able to consume even if the bandwidth of the hub it has higher bandwidth.

• Catch 22 - Port Trunk Configurations: how to combine identifiers VLAN native with DHCP (but allows traffic of VM)

  Catch 22 - Port Network Configurations: how to combine identifiers VLAN native with DHCP (but allow the virtual computer)

  I came across a Catch 22.  Maybe someone can restore the directly here.  I found a "witch hunt" for sure.

  It comes with the Ports of junction on the side of the switch of the ESX host network.

  Context:

  Ok. The Setup is a HP Blade C7000 enclosure.  I try to configure ports for switching to the blades.  ESX 3.5 U4 will be installed the BL460cs.  Installation is preferred method: revive unattended.  No problem with the syntax of Kick-Start,

  I am here, it's the side network.

  The problem:

  I find a major complication in that the switch ports must be configured for both traffic Service Console and VMkernel, more Virtual Machine since only two NICs by blade. Not best practices, but we have only two switches Cisco 3020 inside.  The two uplink physical NIC is paired in the same vSwitch.  (No iSCSI does fortunately).

  So the Catch 22 question is as follows:

  If the id VLAN native set up on the switch port, DHCP works of course and the VMware boot loader is able to grasp a binary / packets on the network (FTP Site) and install OK.  But after no installation, no communication with SC unless I set the VLAN id of the SC to '0 '.  The value "4" 0 does not communication, but "40" is the VLAN native.

  If id configuring VLAN native retired from the Switch port, DHCP will not work and host does not have IP address during the VMware boot process.  This is as expected as traffic without label is not assigned an eligible

  VLAN, so no comms.

  The Port of the Switch configuration:

  interface GigabitEthernet0/16

  SERVERNAME description

  switchport trunk encapsulation dot1q

  switchport trunk vlan native 40

  switchport trunk allowed vlan 40-254

  switchport mode trunk

  switchport nonegotiate

  Speed 1000

  No cdp enable

  spanning tree portfast trunk

  end

  Summary

  OK, let's summarize where things are and if possible please attach responses to their digital identity.

  (1) is there a way to delete the VLAN tagging altogether side ESX host? Not only the id '0 '. The problem is with clearly with the VLAN native defined as "40".  If "40" IDs specified on the Group of ports for the Service Console, no joy, no comms. If the id of '0' value, capable of ping gateway and communicate on the network.

  (2) what is the problem with the definition of VLAN native as "40" when the config for the switch port is set as VLAN native "40"?  Or if it was a problem?  Both parameters clearly do not work together.

  (3) a switch receiving a unmarked frame it will assign to the VLAN Trunk native. Ok. Trunking bases and why I need a VLAN specified on the port for DHCP native work.  But it seems that since the id VLAN is set manually even as VLAN native, closed communications and no traffic as possible.

  (4) executives made tag 802. 1 q VLAN native?  I think that it is not and this could well be the problem. Since the id VLAN "40" is not labeled, but try to score the side host vSwitch port group.

  Please let me know your thoughts, community and how in general, we are approaching 2 NIC ESX configurations.

  When trunking multiple VLANs, you either have a default VLAN is nothing is tagged, or you don't.  That's what the vlan native to you, it defines which VLAN would be used if no tag is visible on the packets traversing the network.  For servers, if you are marking, then everything has to tag, if you're not marking at the server level, then the port must be either an access port or a VLAN native or default must be set.  I also don't keep your service console the same network as your vm.  Keep this isolated for the security of the network.  If you isolate this VLAN, you can separate and use a single IP address for installation and one for post construction.

  Or, you can provide an IP address during the build.

  -KjB

  VMware vExpert

• Flash Builder ADEP connection with LCD screens project

  I installed Flash Builder to talk about BlazeDS, but never at LCD screens in the context of a request of the ADEP.

  I am particularly interested in this area of my project properties:

  

  What should I do to get my build connected to the ADEP LCD screens?

  Thanks in advance!

  Here's my quick start for people with experience in Blaze DS or LCDs. Instructions are based on documentation... it's just a quick start to get you up and running quickly.

  The part you are looking for is the create a Flash Builder project for the echo service customer . This pulls in the configuration files when you create the project of the ADEP.

  http://blogs.Adobe.com/kmossman/files/2011/10/ADEP-data-services-quick-start.PDF

  Post edited by: Kurt Mossman

• Download a file using a php script when running applications with LCD screens

  Hello! I'm developing an application in Flex 2 / Java - running on the LCD / JRun server.
  
  I'm trying to add downloading features. I use a script php to the download section.
  
  First, I'm just trying to put the script in the application directory. Does not work.
  After that I created an apache server where I put a small web site with my script. He tells me that my file is downloaded correctly, but I can't find the file. The apache log I don't give no errors.
  
  Can someone help me?

  Originally, I had problems w / the file placed in C:/whatever.ext b/c I was not using relative paths.

  This is the code I use:
  --------------------------------

  $MAXIMUM_FILESIZE = 1024 * 1024 * 2; 2 MB
  $newFileLoc = '. '. "/ wherever/file.jpg.

  If ($_FILES ['Filedata'] ['size'])<= $maximum_filesize)="">

  move_uploaded_file ($_FILES ['Filedata'] ['tmp_name'], ".") / temporary / ". $_FILES ['Filedata'] ['name']);"

  Rename ("./temporary/". $_FILES ['Filedata'] ['name'], $newFileLoc);
  chmod ($newFileLoc, 0777);

  }

  ---------------------------

  Editing of this article by Adobe:

  http://livedocs.Adobe.com/flex/201/html/wwhelp/wwhimpl/common/html/wwhelp.htm?context=live Docs_Book_Parts & file = 17_Networking_and_communications_173_6.html