With the help of Photosmart 7350 with Win 7

Similar Questions

• Photosmart 7350 and Win 7

  I have a photosmart 7350 and Win 7 ultimate, I installed the other driver Deskjet 5550 by HP support, but still no joy. (this driver does not work on Vista)

  You can try to add a device and select windows update to search for additional drivers. After that windows update is running, you should see a set of drivers under Hewlett-Packard. In this list is a photosmart 7150. I have not tested this driver but the products look like enough to make it work.

  I would like to know if it works.

• With the help of Photosmart 7660 w / G5 mac OSX 10.5.8

  Hello I have recently connectedmy Photosmart 7660 on my G5 mac OSX 10.5.8 running. I made sure that I deleted all of the old files HP from my hard drive. I also unplugged my printer (and it turned off). I then powered back on my Mac, re-connected the printer and turned it on. Once the printer is on, I ran the new OSX software update that updated the photosmart software (installed etc.). Now my problem is when I print a document, I get an error message in the Middle staing impression that the print job was arrested. I don't know what I'm doing wrong. No matter what assistance [would be greatly appreciated. Thanks in advance.

  Basically, I did what you said now about the CTRL key and selecting Remove the hp printer (I had previously deleted all of the other old hp drivers etc.). Then I turned off the printer and it disconnected from my computer. Then I reconnected the printer and turned it on. Then I went to the apple icon and ran the software update. Then downloaded and installed the HP package through software update. Then, when you are prompted to set up / choose the appropriate model / driver I noticed before I skipped this step and just assumed that the installer would automatically choose the correct printer / driver. When I skipped this step already, I came across stop printing and not being able to see ink level etc. So this time I scroll through the list of printers / drivers and chose model 7660 closest number which was 7550 I also noticed that all the models in this range seem to use the same driver who was Gutenprint v5 1.3. so I thought it must be the correct driver for this printer hp group to address number. I've been running non-stop printing since then without any problems and I can also check and see my ink levels now. Hope this helps someone else with the same questions...

• With the help of several NIC in Win 7 - different subnet

  Can someone tell me the best way or the right way to configure two 2 Gigabit NIC in Windows 7 Ultimate?

  Map NETWORK 1 is currently used to access the INET and my FreeNAS server via a 192.168.0.x subnet. I would like to set up a 2nd NETWORK card to maintain a "static route" between this box (Win 7) and box of FreeNAS (OPT 1 is configured as a secondary NIC on the side of FreeNAS already).

  The static route will use the subnet 192.168.x.x with FreeNAS is 192.168.1.100 on the secondary card. The Win 7 box, I'm going to say... 192.168.1.3 for the static route NIC w / the same thing for GW and DNS.

  Is it possible that way, as mentioned above, or what I need to dig a little deeper. The static route will allow me to exploit the full potential (at least I hope) between 2 machines with regard to flow by a X-Over cable. This way I can put both sides higher than regular LAN depending on the parameters.

  I don't need to work, but rather a bit more than the flow of 20 MB/s when xfering large files recording studio. Yes... I know that FTP is not the best for xfering... I'm looking into SSH w/patch, SMB/CIFS or NFS

  Tim

  Your plan should work fine.  Specify a subnet mask of 255.255.255.0 on both network adapters to 192.168.0.x and 192.168.1.x different subnets.

  You do not need to specify GW and DNS on the secondary NETWORK, and you don't need to create a static route.

  To access the box of FreeNAS on secondary NETWORK map, use his IP (192.168.1.100), and not its NetBIOS name.
  Owner, Boulder computer Maven
  Most Microsoft Valuable Professional

• To create the distribution with the help of disk manager.

  Dear all, I m facing problem with blue screen error. And my all partitions is corrupted and I like repartition with the help of disk manager. Win xp bootable cd its not working. so pls help thank you & best regards

  Hi zubair.

  · What is the exact blue screen error you receive?

  · What happens when you try to boot from the CD?

  · You want to reinstall or restore the system?

  · Do you remember any changes made on your computer before the show?

  · Are you able to boot to the desktop?

  · You have saved the data?

  You can check the links below: how to use disk management to configure basic disks in Windows XP:http://support.microsoft.com/kb/309000

  How to partition and format a hard disk using the Windows XP Setup program:http://support.microsoft.com/kb/313348

  Best practices for partitioning a hard drive:http://www.microsoft.com/windowsxp/using/setup/expert/tulloch_partition.mspx

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My HP Photosmart 7660 printer does not work with Win 7 Ultimate. Need help, where can I get the right driver?

  My HP Photosmart 7660 printer does not work with Win 7 Ultimate. Need help, where can I get the right driver?

  Visit the HP website and look.

• Do not launch Lightroom, right after the start screen. With the help of lightroom6 on Win 8.1.  Installed and worked for a week.

  Lightroom does not start, gets stack after the splash screen.

  With the help of lightroom6 on Win 8.1.

  Installed and worked for about a week, before it happened.

  David

  Hi assani

  Now it's working.

  After the restart I have asked me to update to lightroom, which I did.

  Now it's working.

  Thanks again, David

• Cannot print with Windows 7 and Photosmart 7350

  Hello. Recently, I converted my laptop to Windows 7 Home Premium OS. I have no problem printing to work with this computer of our HP LaserJet but when I enter the problem starts. I have a wireless home network with my Photosmart 7350 connected to my desktop computer that is still running XP. The wizard sees the printer and adds but cannot print a test page. He says that it is waiting, then the print job disappears. I downloaded the Vista driver for the printer. When I run the troubleshooter, it cannot determine the problem. No surprise as convenience stores rarely did help. I got around the problem by sending documents to the desktop so far and then print it from there, but it gets old. Any ideas?

  Please install the printer on Windows 7 by using the following steps:

  http://support.HP.com/us-en/document/c01796821

• With the help of old gear series noon on El Capitan

  I have a Vox Tonelab SE effects audio Board (around 2004), there the old serial midi on the back ports. I hung with the help of a USB MIDI interface cable. While the USB Midi interface to the show in Audio / Midi set upward and also in the profile system for USB port it does not detect the Vox Tonelab so no communication lunch.

  There is a POWERPC application called ToneLabSE SoundEditor which I downloaded and installed in the hope he would install a driver but I guess that this obviously doesn't work on INTEL in any case. Using Wine I can run the PC version, but still no communication via midi.

  Someone at - it ideas, would like to get this Panel communicating effects via MIDI.

  Thank you

  

  

  

  Solved! Using the WINE app I've run the version of the PC of ToneLab SE editor application. So pretty unintuitively by changing the serial midi to USB, SERIAL interface cables that went to the and out on the Tonelab SE. Now of the Se ToneLab editor I can write banks of programs to hardware Tonelab, but unable to empty the banks since the material Tonelab to software. My main desire was to use Expression pedals on the Tonelab as Midi Ableton controllers and some of the switches to the control of the Looper stomp. Now I can do it all. Hooray!

• Need help with Win XP Installation on Satellite A200

  Hello

  I tried to install Win XP on a new Satellite A200 - 1TJ model PSAE3, so I used the link that is given to me and downloaded the Intel storage utility Disk Manager. But it does not at all.

  I did these steps so far:

  -Insert the CD in Win XP (version 32 b) laptop, press F12 to boot from the CD and start the installation. After the installation has begun, I pressed F6.
  -After a few seconds, Windows XP asked me for some externel drivers, I have inserted the floppy disk with the drivers in my external floppy drive, pressed in and chose the 82801 HEM / HBM SATA AHCI for my laptop. (Yes, it's the right one, I tried with the driver of another, similar, but it works with the first)
  -Continue the Installation, Windows asked me to install Windows XP, press F8 to accept, and she continued.
  -The window to the right controller appeared, I have chosen to format and create partitions, stop the installation and everything repeated while Win Vista is not your HARD drive, but the driver is installed.
  -J' chose C:\ to install, press ENTER to accept and then the first Windows files had been copied on the HARD disk.

  - Then the installation stopped, asked me to insert the "Intel Storage Manager driver" to my floppy drive, in my opinion the right one was inserted, I pressed Enter to continue, but nothing has changed.

  I just tried to use a WInXP unattended to pre-install the right drivers, but with this CD, the installation does not start. I also tried some drivers of Intel and Toshiba for the Intel Storage Manager, downlaoded all them and get to the disk, but it does not continue with the installation of Win XP.

  Maybe someone has another idea?

  You come in on this thread;
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=102243#102243

  The Intel Matrix Storage Manager is the right driver, well, looks like you made a mistake.

  You have formatted and created the partitions after the installation of the Intel Matrix Storage Manager. Please don t format the HARD drive, because in this case, you will lose the SATA driver!

  By the way; NLite software could help you to create a new XP and include the SATA drivers.

• How to set the power settings - Satellite Pro A10 with Win XP Pro

  I an A10 Pro of the Satellite with Win XP Pro installed and cannot access the power settings. When I go into the power settings in Windows, I get a msg telling me to use Toshiba Power Saver and Win power settings are grayed out.
  I installed pwrsav-spa10-xp-60007-.zip which tells me that it is installing the Toshiba Power Saver, but always Win power settings are greyed out and I can't find no separate application "Toshiba Power Saver".
  The BIOS shows ' version of BIOS ACPI = 1.30.
  Can someone advice how to change the power settings please?
  Thnx.

  Dave

  Hi Dave,.

  You have the "Toshiba common Modules" installed? They must first of all for many models of Toshiba, and power settings module is an add-on for that.

  If you do not have the appropriate restoration or the utility CD handy, the drivers can be downloaded from the Web from Toshiba website.

  I hope this helps, let us know how you go

  Weezle

• can I search with a photosmart 7350 printer?

  can I search with this printer?

  Hello

  The Photosmart 7350 is a printer only and not a multifunction device,

  This is why there is no ability to analysis provided by the device.

  You can find the specification of printer below:

  http://support.HP.com/us-en/document/bpy20818

  Kind regards

  Shlomi

• find, "with the cd on the bios boot < on apple PC with win xp.

  Password lost on cp family.  We do not find the boot from cd on the biops. It's a PC with win xp apple

  Hi haouatim,

  There is nothing indicating 'Boot from cd' in the bios. You will need to arrange the priority of disc to create your CD / DVD Drive as the first boot device.

  Leave the Windows XP cd in the drive and restart your computer. It will then display you the option «press any key to boot from CD...» ", and then you must press a key or the Enter key.

  Reference: http://www.ehow.com/how_6196502_set-bios-boot-cd-vista.html

  You will need to save your own installation of important data of the operating system that result formatting will destroy all your data from the partition of the said.

  I hope this helps.

• Since the new pc will be mo more loaded with win xp, can demote us ourselves?

  Since the new pc will be mo more loaded with win xp, can demote us ourselves?

  License wise you can license windows 7 legally allows you to downgrade if you wish, for compatibility reasons.

  It's the OEM to support OEM systems, so if you have any questions, then the supporting manufacturers cannot help if what the other poster said is true insofar as they will not support a drop in ratings more.

  XP mode is a very good concept, but it falls really flat in some areas.  Printer redirection is not reliable, you can't automatically USB devices like scanners attaches, communication between the Windows 7 host and guest of the XP mode is slow if you try to use a printer or shared folder to work around the problems of redirection.

  I have not found a viable solution for companies that use older scanning applications that don't working correctly in windows 7.

• My PC (win XP) can not get Internet through a Bluetooth adapter to the phone, same phone work with win 7 & vista.

  Original title: internet telephone

  My PC (win XP) can not get Internet through a Bluetooth adapter to the phone, same phone work with win 7 & vista

  Hello

  1. What is the brand and model of the phone and Bluetooth adapter?
  2. what exactly happens when you access the internet via your phone?

  Please provide more information. This will help us assist you better.

  How to ask a question

  http://support.Microsoft.com/kb/555375

  Also, please take a look at the below items that might help you.

  How to install and configure Bluetooth devices in Windows XP Service Pack 2

  How to troubleshoot Bluetooth detection and connectivity issues in Windows XP Service Pack 2

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]