Similar Questions

• With the help of VMware ESX in a business continuity Plan

  I'm looking to set up a Plan for continuity of the business using Vmware ESX. I would like to install an outside site that will duplicate a few key servers. Does anyone have any ideas on how I can do this with ESX? Is it as simple as pushing Server snapshots to the offsite location? Any ideas...

  Thank you

  Scott

  Hello

  Welcome to the forums.

  I'm looking to set up a Plan for continuity of the business using Vmware ESX. I would like to install an outside site that will duplicate a few key servers. Does anyone have any ideas on how I can do this with ESX? Is it as simple as pushing Server snapshots to the offsite location? Any ideas...

  One thing to know is that a snapshot in terms of "VMware" is not a full copy of the disc, it is a file that contains the changes to the drive block since the snapshot was created. Snapshots of assistance in making backups of virtual machines running, but allowing the basic disk to copy while the data is written to the snapshot. Then, you're the snapshot.

  So how do DR/BC is having a good backup strategy using one of the available backup/replication tools.

  There are:

  Veeam Backup w/replication

  Vizioncore vRanger backup and vReplicator for replication connection

  EsXpress doctorate for backup (restorations of use for replication)

  There is also some SRM if your San is supported, etc.

  So there are a lot of options the question is how 'real time' you need the data. You could also use the replication SAN, Double Take, etc.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009, Analyst of DABCC
  ====
  Now available on Rough Cuts: ' VMware vSphere (TM) and Virtual Infrastructure Security: ESX security and virtual environment '
  Also available "VMWare ESX Server in the enterprise"
  SearchVMware Pro| Blue gears. Top virtualization security links| Security Round Table Podcast virtualization

• With the help of VMware CP in DMZ networks

  Hello

  I am familiar with the installation and configuration of the PC, but I have a requirement for a customer that the network consists of many DMZ networks, which are all protected by a firewall between them for safety reasons.

  Is there a way that CP can be configured for statistics before several data collectors, located within the DMZ networks to a central collector, related to the data warehouse?

  There is no way that my client can open the ports required for 'normal' data collection, and I was hoping that there would be some sort of SSL connection between the collector in the demilitarized zone and the main collector on the local network.

  The only other option would be to create a single data for each DMZ collector and record each as a separate company...

  You can do in case of problems. After you have created the company, you add can all collectors by going to the company-> save the database ID and click on the Add button. After the first synchronization, wait a few hours and create a project and associate all systems.

  I've done a few times for the same exact reason and it works fine.

  There is no built-in way to link collectors I know. I guess you could plan a robocopy to move each utbox files in a central shipping box, but it would be a pain.

  Dave

• With the help of VMware workstation 7 on Win 7 laptop

  Hi all

  Out of curiosity, someone at - it never try to install VMware workstation on Windows 7 with 4 GB of RAM (Intel® Core™ i5 - 520 M processor (3 m Cache, 2.40 GHz)

  I intend to run SharePoint server 2010 beta on this laptop for a demo and I was wondering if it is recommended or not?

  Thank you.

  Kind regards

  AWT

  I run WS 6.5 on a laptop of recent Dell game (1 year) with 4 GB of RAM with Windows 7 64-bit. In fact, I have 4 ESX and Vcenter that run in WS 6.5 for education. You need a 64-bit version of Windows to use 3 GB or more due to limitations of 32-bit Windows.

• Publish with the help of VMware thin App

  So far, I have:

  Created a package on the deployment server

  Moved the .exe to a folder named DeployMS at the root of C:\ on this server

  Machine for the MSword.exe and created a shortcut from a XP lance Word very well.

  So now, I copied ThinReg from the server to the XP Machine deployment

  and created a file locally beats on the C:\ of the xp machine that has:

  c:\Thinreg.exe/r/a ".
  & lt; Server name & gt; \DeployedMS\MSWord\Microsoft Office Word 2003.exe

  But the word is still not save.  No shortcut in the start menu, can not open .doc to the file. ect...

  Can someone tell me please in the right direction.

  The account has access to the location of the file on the server?

• With the help of Fusion Pro license to activate Win7 installation of VMWare Player

  According to http://www.vmware.com/products/fusion-professional/compare.html, Fusion Pro includes a license for the use of VMWare Player Plus. However, when you try to activate the Player Plus (reader-> help-> enter license key...) and enter the key, nothing happens. (The warning at the bottom of the screen that my evaluation license will expire in N days persists). Any help thrown my way is appreciated.

  Best,

  Adam

  I think this might be the post: trial license expired blocks of VMWare Workstation without drive

  I did an uninstall of the program and then started across the registry of rooting for any instance of vmware (Ctrl-F) and he nuking (not for the faint of heart).

  I think that what he did was to find the license key, who lives under a key 'VMWare, Inc.' (there are several of them) (note that it was not under the path mentioned in the thread above).

  I also cleaned up C:\ProgramData\VMWare, which contained the cruft of various other software products VMware I had been assessed, but had uninstalled.

  Thanks for the help,

  Adam

• With the help of an operating system older Compaq is professional Windows. Internet Explorer connected very slowly. .

  With the help of an operating system older Compaq is professional Windows. Internet Explorer connected very slowly. SO I've reworded in safe mode with network and IE has worked very well. I installed Mozilla Firefox and then restarted in normal mode. Then Internet explorer would not connect. How to diagnose in safe mode. What does safe mode or safe mode with network do to help diagnose? Can someone help me solve this problem? Any help would be appreciated thanks in advance.

  Hi, Raymond J,.

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What type of internet connection do you use?

  ·         What security software do you use?

  Follow these methods.

  Method 1: As the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 2: Follow the steps in the article.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  How to reset the Protocol Internet (TCP/IP)

• With the help of Windown 10, not all pdf documents launch Adobe Reader DC.  As a result, I have not all normally available printing options.  How can I get Reader to open the default player.  I need to clear, step by step direcitons, please.  Thank you

  With the help of Windows 10, not all pdf documents launch Adobe Reader DC.  As a result, I have not all normally available printing options.  How can I get Reader to open the default player.  I need to clear, step-by-step instructions, please.  Thank you

  Hello

  Please visit the following link to set the reader as default PDF reader.

  Restoration of Adobe Acrobat Reader in the default PDF Viewer

  Concerning

  Sukrit diallo

• VMware Tools missing in the Installation of VMware Player 7

  Hi all

  If I try to install/upgrade to update VMware Tools after the Installation of VMware Player 7 no ISO will be connected to the virtual machine.

  I checked the directory of Installation of VMware Player for the ISOs of the tools but no ISOs are there.

  Can you help me out of this Situation or is it a missing element in the installer?

  Thank you

  Michael

  I just downloaded VMware-player - 7.0.0 - 2305329.exe and installed under Windows 7 x 64 and had no problems with it automatically detect installed VMware Tools to the guest operating system to be downloaded and successfully downloaded.  Having said that, have you tried? : Player > file > Preferences... > download now all components

  Maybe something is blocking you to download the VMware tools.

  You could also do it manually by using the following tools from VMware for VMware Player 7.0.0.

  • Tools-freebsd - 9.9.0.exe.tar
  • Tools-linux - 9.9.0.exe.tar
  • Tools-netware - 9.9.0.exe.tar
  • Tools-solaris - 9.9.0.exe.tar
  • Tools-winPre2k - 9.9.0.exe.tar
  • tools-windows - 9.9.0.exe.tar

  Unzip the file, then run the executable result and it will silently install the file without any indication that he actually did like this isn't really so planned how to do even if it works!

• Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Would you like to share why you must do a clean install?

  You can try the recovery of the internet (which will work if your older model has been updated to enable of): hold command + Option + R until you see a progress bar (take a while). It will connect you to the Apple servers. When you see the utility window, choose disk utility to erase your disk and when you're done, choose to reinstall OS X.

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  PS: Correction: I think not yours can be updated; in this case, you will need the original installation disks to wipe the drive and reinstall.

• ow change titles & dates of lots of pictures (like in iPhoto?) With the help of Mac 'Pages' on, 2008 aluminium MacBook running OSX El Capitan 10.11.4

  How to change titles & dates of lots of pictures (like in iPhoto?) With the help of Mac 'Pages' on, 2008 aluminium MacBook running OSX El Capitan 10.11.4

  With the help of Mac 'Pages '.

  A typing mistake?

  If it is and you mean Photos Date of Mac are modified by selecting the photos using the Image menu == > adjust the time and date of order and changes made to the metadata such as keywords, location, etc. are made by selecting the photos and find the info and registering metadata in the Info window

  These are detailed in the help topics of pictures - a good place to look for help on the Photos

  View and add information about the photos

  You can view and add information about your photos. For example, you can see the date and time a photo was taken, the information about the camera that took the photo and badges that indicate the status of the photo. You can assign titles and captions to photos, add or change the location of the photos and change the date and time for them information. You can select multiple photos in an instant and add or change information about them all at once.

  Open pictures for me

  View and add information about the photos

  To view or change information for the photos, you select one or more photos, and then open the information window.

  • Open the Info window: Double-click a photo to view it, and then click the Info button in the toolbar or press on command I.
  • Add or change information: Change the following.
    • Title: Enter a name in the title field.
    • Description: In the Description field, type a caption.
    • Favorite: Click the Favorites button to mark the photo as a favorite. Click the button again to deselect.
    • Keywords: Enter the keywords in the keywords field. When you type, Photos suggest keywords that you have used before. Press enter when you have finished a keyword. To remove a keyword, select it and press DELETE.
    • Faces: Click on and type a name to identify a face. Click on several times, and then drag the identifier of the face different faces to identify many faces in a photo.
    • Location: Enter a location in the location field. When you type, Photos suggest places you can choose. To change a location, you can search a different location or change the location by dragging a PIN on the map. To remove location information, delete it or choose Image > location, then choose Remove location or back to the original location. You cannot assign a location if your computer is not connected to the Internet.

  Show titles, other metadata and badges

  Change the date and time of photo

  You can change the date and time associated with a picture. You can do this if you are traveling to a location in another time zone, and your camera affect your dates photos and periods that are correct for your House, but not the place you visited.

  1. Select the photos you want to edit.
  2. Choose Image > adjust Date and time.
  3. Enter the date and time you want in the modified field.
  4. Click a time zone on the map, if necessary.
  5. Click on adjust.

• With the help of 1.7.0_07 - b11 version JRE Java hotspot Client VM

  I can't use by net cooking system indicates error java and java download does not work with my system with windows 7 giant premium 64 bit computer laptop.

  REPRT ERROR:

  Java plug-in 10.7.2.11
  With the help of 1.7.0_07 - b11 version JRE Java hotspot Client VM
  Home Directory user = C:\Users/
  ----------------------------------------------------
  c: clear console window
  f: finalize objects on the finalization queue
  g: garbage collection
  h: display this help message
  l: dump classloader list
  m: print memory usage
  o: trigger logging
  q: Hide console
  r: reload the policy configuration
  s: dump system and deployment properties
  t: dump thread list
  v: dump thread stack
  x: delete the cache of class loaders
  0-5: set the trace level

  Hello

  1 are you facing this problem with a specific Web site?
  2 are you having the same problem on other browsers as well?
  Please follow the links below to solve the problem.
  Method 1
  How to troubleshoot script errors in Internet Explorer
  http://support.Microsoft.com/kb/308260
  Note: follow the steps as troubleshooting applies to JAVA issues.
  Step 2
  How to enable Java in my web browser?
  http://www.Java.com/en/download/help/enable_browser.XML
  Method 2
  If you still face problems, please uninstall and reinstall JAVA
  Remove all traces of the failure of the Java installation by uninstalling Java:
  
  http://www.Java.com/en/download/help/uninstall_java.XML
  Install Java
  http://www.Java.com/en/download/index.jsp
  I hope this helps.

• Allows users not able to connect to the server through Vmware Player Flex

  Hi all

  I created a Horizon Vmware server with Flex. Created Windows Image and saved the VM in the Flex web console. The configured policy and gives the right to some windows domain users to use this Image.

  I created a group called "Mirageadmin" and added two users in this group. Mirageadmin belongs to a group of Administrators local and also added to the Administrators group in the console of Mirage . These two users can connexiona Horizon flex web console.

  My problem is that when the user right connect to the server through Vmware Player Flex, its list of username or password is incorrect, please try again. But the user name and password is correct. Later one of the user added to the Mirgaeadmin group policy gives right I. While this user can connect to Flex server via Vmware Player.

  
  

  1 should. users entitled be part of the local administrator group of the Flex server?

  2. do I need to add these users right somewhere in the console of mirage?
  

  Thanks for supporting.

  Hi all

  Turn history on security locally should be set in the server included users who try to connect via Vmware Player.

  Our GPO has been tighten to allow only to administrators and users authenticated to allow log on locally. Adds a new GPO to enable a group of users to log on locally, which solve the problem.

• With the help of com 1

  I have VMware 7.1.6 build 744570. With the help of 'Virtual Machine Settings' and 'Add', I am able to create a serial port as "serial port 2" and "serial port 3", but I can't create port 1 (a.k.a. com1).

  Someone at - it ideas?

  By default, the tool ThinPrint VMware uses COM1.  He is the host printer can be used without having to install specific printer drivers in the comments.  I normally do not use ThinPrint so I just remove the printer settings of the virtual machine and then when I add a Serial Port, which he defined as COM1.

• With the help of ActiveSync

  I just got the Samsung Galaxy S4 and I'm looking to find an e-mail with the help of ActiveSync client; However, it is precarious with our administrators having the ability to remote wipe our personal devices. In short, with are all the other available similar policies and remote wipe sandboxed for this application? or apply to the device as a whole? There may be a white paper available to read more about this? Is there a free trial of this application to test the feature?

  Thank you

  Neil

  Hello

  The app is designed to comply with Android Device Policy Manager, so he's going to wipe the device when receiving the order of deletion from the server.

  Management of workspace on personal devices is supported in VMware Horizon Mobile products:

  http://www.VMware.com/products/desktop_virtualization/mobile/overview.html

  To the point, we don't have a free trial version.