With VFoglight 6.1 process monitoring

Similar Questions

• Here a process monitoring app office charge before explorer.exe

  Hello

  I was asked to find a way to load an office process monitoring process before explorer.exe

  Our monitoring application takes a few minutes to load, and we would like to speed up the process.

  It was suggested that replace us explorer.exe shell by default with our app.exe and as soon as it loads restoration explorer.exe shell

  Anyone have any ideas?

  RR

  Hi ReggieRichard,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the Sub forum.

  Link: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/threads

  With regard to:

  Samhrutha G S - Microsoft technical support.

• Linux process monitoring

  I just installed NMS.

  I want to follow some linux process, I can monitor basic server stuff and set alerts for up/down interface... I get the email alert.so it works fine...

  I read on the forum above to open this post...

  1 there is not an error or omission in the supervision of the State... and the current process monitor is Ok.

  2. I have the same problems as the 2 another post I found in this community...

  I set the alert to send an e-mail if the process is NOT running... but the process is running and I get the alert...

  I set the alert to send an e-mail if the bias is running... I stop the process and I get the warning that the process is running...

  I check the process with the command ps - ef too...

  I tried with centos and debian 607. same problem with both...

  is this a bug? NEM 6.8.24479 or am I missing something...?

  Hello

  We have already discovered this and Quest were recognized as a bug - BUG ID 2792 "alert message indicates that the process down when they are running. We have no date yet for a fix.

  Brian

• Including a new report of process monitor

  Hi all
  
  I was wondering is adding a new type of report on the Workbench under process monitor reports (default reports are: Process Monitor, Process Monitor with locks, all categories of process, process status period monitor range, process monitor sorted by location hierarchy) I might modify the information showed by this 'new report '.
  
  For example if I generate the process with locks monitor, it will display all only place that I have in my application, but I need this 'new report' to see the only some of these places filtered by an attribute, I supposs the correct way to do currently to locate and modify the script being called by the adapter to publish this report. The problem is that I can't find what is called script.
  
  I'm wrong and this publication process is done through a already compile library, a .dll file? If this is the case is anyway to replace this call?
  
  I hope I made my problem clear enough
  
  Thank you
  
  Published by: HFMColUser on 26 - it is a-2011 15:41

  Hello
  Log on to FDQM (FDM) work bench customer, and then click Reports tab.

  Copy the report you want to edit and paste (I prefer to do it this way, we will create all the problems in the existing reports)
  change the description of the report.

  Right-click on the report now. Definition of report clcik properties, tab click SQL on the top.

  Now add vpartcatpercartesian.partname like '% E '. so, you will get only the localities beginning with E in your report.

  Published by: PadmajaV on August 27, 2011 03:15

• LDAP configuration with vFoglight 6.5

  Im trying to configure LDAP services within our domain for use with vFoglight. My goal is to have a group operator and administrator group that uses our AD accounts instead of "local." I'm not sure if I have properly configure all LDAP settings. Can someone check my settings and let me know where can be the problem?

  Also under Administration > users & security management > user management > groups; The LDAP group button is grayed out. If the LDAP settings are correct this button will become live?

  Here are our settings:
  Account is anonymous. fake Unique name of the service account. Contoso . com\svc_acct password | **** LDAP query prefix | CN= Query LDAP suffix. OU = site, DC = corp, DC = contoso, DC = com The scopes to search for groups | UO = site, DC = corp, DC = contoso, DC = com The second space of group names. UO = site, DC = corp, DC = contoso, DC = com The third namespace group | "in white" The LDAP context for the user's search. UO = site, DC = corp, DC = contoso, DC = com Role attribute ID | name Is Role DN attribute | fake ID of user alias attribute | sAMAccountName ID of the attribute to search for groups | members Match the DN of the user. true JAAS LoginModule name | Security for JACQUES com.quest.nitro.service.security.auth.spi.NitroExtendedLdapLoginModule name field. FGL-web-console Group ID parent attribute | memberOf Attribute of the group to search for nested groups. members Maximum level of group nesting. 15 LDAP search time (milliseconds). 10 000 mode of research group | direct

  I hope that your problem has been resolved but support. You can also check our free training site: http://svgtraining.quest.com/ which has a video on the LDAP configuration.

• How can I get information from performance on disc with vFoglight 6.5 latency?

  Can someone tell me where I can get info from performance on disc with vFoglight 6.5 latency?

  There are also alarms that deal with the latency of disk. You are looking for a report or dashboard? Check the alarm Viewer and define a filter on the "latency". This will show you all the current latency time, then you can explore the host or logical unit number that is having the problem.

• Hello! I can't subscribe to creatively Cloud for photographers. When you subscribe to gives an error when you pay with the card: "order processing error occurred for more information, please contact the Customer Service by phone 8 800 333 36 63."

  Hello! I can't subscribe to creatively Cloud for photographers. When you subscribe to gives an error when you pay with the card: "order processing error occurred for more information, please contact the Customer Service by phone 8 800 333 36 63, when making a payment via PayPal: PAYMENT_CPG_SETTLE_FAILED. How to order?

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Adobe Premiere Elements 12: not compatible with EXECUTE-programm for my monitor detected an update is necessary.

  I got the message during the opening of a new project in Adobe Premiere elements 12: not compatible with EXECUTE-programm for my monitor detected an update is necessary. I tried several updates but windows7 does not detect an update. What can I do?

  Update your graphics driver.

• Cf11 crashes (application pool suffered a fatal miscommunication with the to Windows Process Activation Service)

  I have a cluster of 2 servers web IIS on Windows Server 2008 R2. They were executed on CF10 for over a year (if there are not two) without any problem. I've upgraded a server to CF11 and now this server crashes then CF10 servers still works fine.

  I see 4 instances of this error in the Windows event log:

  «A process serving application pool ' *' suffered fatal miscommunication with the to Windows Process Activation Service.» The process id was '4652'. The data field contains the error number. »

  Then finally:

  "Application pool ' *' is automatically disabled due to a series of failures in the process serving the application pool."

  Looking at the application pool in IIS administration, he is arrested. Reboot will solve, but it will eventually crash.

  What could be the problem?

  -Phil

  I didn't turn off logging, but in fact, he stopped recording since about 8:30 am PST, which is strange.

  I don't have the exact errors mentioned in the original post (again) but I am faced with the question that some applications take very long. I Failed Request Tracing active and show applications for simple static files such as .css taking 10 + seconds.

  -Phil

• Customize the FDM process monitor reports

  Hi all
  
  The FDM process monitor reports can be customized to the location of FDM group/hide/show, please suggest.
  
  Kind regards
  Sanjeev

  The reports are relatively easy to treat. Open the program client FDM (Workbench), expand the reports tab and then you can change the report from this point. I would recommend to copy the existing report and work on a copy in case where. If you have to write a report of basic skills (crystal reports / access reports), it should be fairly simple. If not, may take some studying to learn how to change the report. In addition, a query SQL/T-SQL basic writing ability would server you well too.

  The report used by FDM tool is Active Reports. They have online user guide; However, it is not terrible:

  http://www.datadynamics.com/help/ActiveReports6/arGETActiveReportsDesigner.html

• VMWare agent that runs on VCenter with Vfoglight 6.1

  Hello
  I'm getting following error in the log of the collector. Thus the Vcenter server does not appear in the console VFoglight.
  2010-06-21 17:25:14, 729 [9] ERROR Collector - OnStartWorker - Error in FoglightHost.OnStartWorker: {0}
  System.ServiceModel.AddressAlreadyInUseException: HTTP could not register URL http://+:8000/FoglightEngine/basicHttp/ , because TCP 8000 port is used by another application. ---> System.Net.HttpListenerException: the process cannot access the file because it is being used by another process
  at System.Net.HttpListener.AddAll)
  at System.Net.HttpListener.Start)
  at System.ServiceModel.Channels.SharedHttpTransportManager.OnOpen)
  -End of the exception stack trace internal-
  at System.ServiceModel.Channels.SharedHttpTransportManager.OnOpen)
  at System.ServiceModel.Channels.TransportManager.Open (TransportChannelListener channelListener)
  at System.ServiceModel.Channels.TransportManagerContainer.Open (SelectTransportManagersCallback selectTransportManagerCallback)
  at System.ServiceModel.Channels.TransportChannelListener.OnOpen (TimeSpan timeout)
  at System.ServiceModel.Channels.HttpChannelListener.OnOpen (TimeSpan timeout)
  at System.ServiceModel.Channels.CommunicationObject.Open (TimeSpan timeout)
  at System.ServiceModel.Dispatcher.ChannelDispatcher.OnOpen (TimeSpan timeout)
  at System.ServiceModel.Channels.CommunicationObject.Open (TimeSpan timeout)
  at System.ServiceModel.ServiceHostBase.OnOpen (TimeSpan timeout)
  at System.ServiceModel.Channels.CommunicationObject.Open (TimeSpan timeout)
  at System.ServiceModel.Channels.CommunicationObject.Open)
  at FoglightAgent.WinService.FoglightHost.OnStartWorker (Object sender, DoWorkEventArgs e)
  2010-06-21 17:25:14, 854 [9] INFO Collector - OnStartWorker - output FoglightHost.OnStartWorker
  And connector obvisouly fails with the following error.
  2010-06-21 17:25:45, 761 [recovery-collector settings] ERROR VirtualESXAgent.BaseCollector - CommunicationException: unable to extract the data from the collector collector settings: the purpose of the communication, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state. Make sure that the collection agent service is running
  2010-06-21 17:25:45, 776 [recovery-inventory] ERROR VirtualESXAgent.BaseCollector - CommunicationException: impossible to extract the data of inventory of the collector: the purpose of the communication, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state. Make sure that the collection agent service is running
  2010-06-21 17:25:45, 776 [5] ERROR VirtualESXAgent.Agent - inventory was empty on records, planning an update
  Kind regards
  Paresh

  The problem is that the port 8000 on the server running the VMware vFog agent. This is the port that the service Colectionneurs & connector communicate on.
  The configuration files need to be changed and the port changed to a port that is not taken.
  Foglightagent.WinService.exe.config
  
  
  
  Virtualagent.exe.config
  
  -Larry

• Can you help me with a configuration of dual monitor DVI?

  I went through a few weeks of effort with it and seeking a

  final solution... I have an i7 Mini - 2012 model.  Two identical

  Acer S241HL LED monitors.  I need the same video display DVI on both

  screens.  A single monitor, close proximity to the Mini... about 1-2 feet...

  The other over a distance of 25 feet.

  It worked with a HDMI > DVI adapter to a Tripp Lite DVI splitter

  For more than a year... then became intermittent.  I tried a different separator,

  an Auralek - it worked fine about a week and then stopped.  Looks like

  dispatchers to stop sending any signal wake-up is necessary after a

  period of time where the computer or monitors have been turned off and then

  No video signal on the power of return.    Have tested all cables,

  recycled, reset everything that can be reset etc... with Mini and

  monitors...  Have had the same problem using Thunderbolt > DVI adapter.

  BTW, this works ok using a MiniDisplayPort > splitter VGA, but I want to

  Resolution DVI.

  Bottom line, is there a known reliable separator or any other approach

  It is relatively bulletproof to achieve...?  I found a

  another device by Sewell who is basically a different dispatcher amplified-

  who says someone worked "better" than the Tripp Lite...

  It appears on diagnostic tests, there is nothing wrong with the

  On the Mini HDMI port. Both monitors work fine individually

  When it is connected directly to the port DVI btw.

  I hope someone can help.

  Thank you!

  Mike

  VGA must have resolutions more than DVI, what ground had VGA?

• I use an iMac with a wrong as a monitor graphics card?

  The graphics card on my iMac went wrong.  The logic board is OK and works otherwise OK.  Can I use the iMac with the graphics card bad as a second monitor in target disk Mode or use it as a monitor for a mac mini? The bad iMac is a model 2011 (of course!) with HDMI ports and Thunderbolt.

  I think you mean that the Display Mode target and any connection to the screen will have to pass by the graphics card. Whereas if you replace the bad graphics card, don't.

• How to solve a major conflict of Firefox with the double LG Smart monitor control screen running.

  PC: Dell Dimension E510 with MS windows XP Professional, Version 2002, Service Pack 3

       Intel(R), Pentium (R) D CPU 2.8 GHz, 1.0 GB Ram.
  

  I have a new 23 "LG monitor (23EN43T). Software to manage LG displays on the screen is called double Smart Solution, which works very well except with Firefox! Firefox screen goes immediately to more than 100% of the space on the screen. I can't even leave Firefox without using Ctrl + Alt + Delete. Then, I uninstalled and reinstalled Firefox, but it does not solve the problem.

   To get around this problem I have to use Internet Explorer.
  

  Firefox may be restoring the last used window dimensions based on a non-plus-relevant monitor configuration. You can try to delete a settings file and see if Firefox detects better your installation at the next reboot.

  With Firefox closed, open your current folder of the (AKA Firefox profile) on Firefox settings. Paste this in the search box on the start menu or in the address bar of Windows Explorer:

  %APPDATA%\Mozilla\Firefox\Profiles
  

  If you find more than one folder, open the one that has been recently updated.

  Rename localstore.rdf to something like localstore.old (in case you want to recover it later)

  Restart Firefox. It is positioned more logically?

  In addition, you should be able to leave "blind" Firefox using these key combinations:

  • ALT + F4 (General combination 'close this window' on Windows)
  • ALT + F, then X (hotkey for File > Exit)

• Problem with the Toshiba recovery process

  Hi guys,.

  I had some problems with my laptop and decided to return to the factory settings. But during the process, because of a few mistakes that I didn't understand, formatting process was broken and I guess that the recovery in my hard drive section was damaged. So, I could not use boot from the hard drive. Becacuse Toshiba did not give me recovery disk when I bought it, I had to boot the pc with cracked windows. I never use illegal software, but I had to do this temporarily. In any case now Toshiba has sold me an extra price, thank you Toshiba!

  Today, I had the cargo, and Toshiba Turkey sent two recovery disks. In the first disc, there are preinst.swm files under the ZZIMAGES folder. And in the second disc, there are some files named as bin, efi, planfolder, boot, sources etc.

  What should I know? Hot to go back to my original windows? And how can I do a recovery of these two DVD recovery usb drive?

  Thank you, best regards better.

  Any help pls?