WLC 2112 with AIR-LAP1252

Similar Questions

• Cisco WLC 2504 with AIR-AP1131AG-A-K9

  Hello

  Can you help me for some info about AIR-AP1131AG-A-K9.

  I have a wlc 2504, but I don't know if the AIR-AP1131AG-A-K9-supported 2504 wlc.

  Can work this WLC 2504 with AIR-AP1131AG-A-K9 solution?

  If so, guide.

  Thank you very much

  Gezimv

  Check out this link. As long as you have software version 8.0.x 2504 version you can use 1131 AP with it. Nothing beyond software fate is more a series of support 1131.

  http://www.Cisco.com/c/en/us/TD/docs/wireless/compatibility/matrix/compatibility-matrix.html#56735

  HTH

  Rasika

  Pls note all useful responses *.

• WLC 2504 with AP 1121 g

  Hey there,

  I have a problem, maybe you can help me.

  I want to join the FOLD of the AIR-AP1121G-E-K9 to a WLC 2504 with software version 7.4.x.

  In the compatibility matrix, I saw that it is only possible if the WLC has 7.0.x software version.

  So my questions are:

  1. Why is it needable to upgrade the 7.0.x to 7.4.x WLC?

  2. is it possible to join the AP1121G a WLC 2504 with 7.4.x version?

  3. What is the difference between version 7.0.x and 7.4.x

  I hope you can help me

  Yes.  That is right.  You need to downgrade the firmware of your WLC to 7.0.X to allow the APs 1100.

  Make sure that you back up your configuration before the downgrading of your firmware.

• apple mouse is bluetoothed with air of the ipad 2

  apple mouse is bluetoothed with air of the ipad 2

  N ° the iPad is not programmed to have a cursor.

• Android: Maintain 2 builds with Air 19 and 22 air

  Hi all

  I want to update our games with a 22 Air version so that all users will be able to play with N installed Android. At the same time, we would continue to support Android 2.x with Air 19.

  I've done that I have created a version of our application with the code with Air 22 x.x.20 version and a version with Air 19 x.x.10. My expectation was that Google would send all users with Android 4 or more recent version Air 22 and all users with the version of Android 2.x 19 Air. However, when I download the version x.x.10 of Google game I get the error message: all configurations that could receive x.x.10 receive x.x.20 instead. Which means that play Google does not identify the accumulation of Air 22 as incompatible on Android 2.x, is that correct?

  What needs to be done to support both versions?

  Thank you in advance.

  rewb0rn wrote:

  I should the minSdkVersion 14 for Android 4 value and more, correct?

  Yes, this should make the build, only available for devices running Android 4 +.

  rewb0rn wrote:

  But more important still, how do I find what targetSdkVersion is supported by the current Air SDK?

  I don't know if this is documented somewhere, however, I remember having seen devs problems AIR when you explicitly set the value of targetSdkVersion at 23. They ended by assigning the value 19. See this link for more information. I don't know if this problem is fixed in AIR SDK 22. You should not need to 23 but in order to make it work on Android 6 +.

• DONKEY with AIR 22 update no longer works

  Hello

  I have a DONKEY simple that file sharing.

  It was built with AIR 19.0 and Xcode 6.1.

  I want to update AIR 22, but you have successfully updated the iOS SDK, I have installed XCode 7.3, base SDK is 9.3 iOS and iOS deployment target is iOS 9.0.

  I have a platform.xml like that.

  <sdkVersion>9.0.0</sdkVersion>
      <linkerOptions>
          <option>-framework AudioToolbox</option>
          <option>-framework AVFoundation</option>
          <option>-framework CFNetwork</option>
          <option>-framework CoreFoundation</option>
          <option>-framework CoreGraphics</option>
          <option>-framework CoreLocation</option>
          <option>-framework CoreMedia</option>
          <option>-framework CoreVideo</option>
          <option>-framework Foundation</option>
          <option>-framework MobileCoreServices</option>
          <option>-framework OpenGLES</option>
          <option>-framework QuartzCore</option>
          <option>-framework Security</option>
          <option>-framework SystemConfiguration</option>
          <option>-framework UIKit</option>
          <option>-framework ImageIO</option>
          <option>-framework CoreTelephony</option>
      </linkerOptions>
  

  My code to share a file is, in objective-C, where the variable URL is a URL, the path to a local file

  @try {
     
              UIViewController * controler = [[[[UIApplication sharedApplication] windows] objectAtIndex:0] rootViewController];
             
              UIActivityViewController *activityVC = [[UIActivityViewController alloc] initWithActivityItems:@[URL] applicationActivities:nil];
              //activityVC.excludedActivityTypes = @[UIActivityTypePrint, UIActivityTypeCopyToPasteboard, UIActivityTypeAssignToContact, UIActivityTypeSaveToCameraRoll]; //or whichever you don't need
             
             
              UIPopoverController *popup = [[UIPopoverController alloc] initWithContentViewController:activityVC];
              [popup presentPopoverFromRect:CGRectMake(0,0,0,0) inView:controler.view permittedArrowDirections:UIPopoverArrowDirectionAny animated:YES];
          }
          @catch (NSException *exception) {
              DISPATCH_STATUS_EVENT(context,"DEBUG_TRACE", (const uint8_t*) [exception.reason UTF8String]);
          }
  

  I have this error in execution: *-[__NSPlaceholderArray initWithObjects:count:]: attempt to insert nil objects [0] object

  UIPopoverController is obsolete now, I triied to update my code, as a result of this http://www.goxuni.com/672368-adding-a-share-button-to-an-objective-c-ios-app/

  And the result is:

  @try {
              UIViewController * controler = [[[[UIApplication sharedApplication] windows] objectAtIndex:0] rootViewController];
              
              
              NSArray *activityItems = @[URL];
              UIActivityViewController *activityViewControntroller = [[UIActivityViewController alloc] initWithActivityItems:activityItems applicationActivities:nil];
              activityViewControntroller.excludedActivityTypes = @[];
              
              activityViewControntroller.modalPresentationStyle = UIModalPresentationFullScreen;
              if (UI_USER_INTERFACE_IDIOM() == UIUserInterfaceIdiomPad)
              {
                  activityViewControntroller.popoverPresentationController.sourceView = controler.view;
                  activityViewControntroller.popoverPresentationController.sourceRect = CGRectMake(controler.view.bounds.size.width/2, controler.view.bounds.size.height/4, 0, 0);
              }
              [controler.self presentViewController:activityViewControntroller animated:true completion:nil];
              
          }
          @catch (NSException *exception) {
              DISPATCH_STATUS_EVENT(context,"DEBUG_TRACE", (const uint8_t*) [exception.reason UTF8String]);
          }
  

  The error is the same: *-[__NSPlaceholderArray initWithObjects:count:]: attempt to insert nil objects [0] object

  I really don't understand why it worked before, and now with new AIR SDK, Xcode new and new iOS SDK, it does not work.

  That's Ok with the last AIR 22 SDK

  Bug #4146925 - ANE compiled with AIR 22 no longer works

• portrait iPad with AIR problems

  Hello

  I need to develop an app for ipad, with portrait orientation. I set the resolution 768 x 1024 BUT publishing for AIR, I can't resize the stage, I can't see the bottom of the screen on my Mac book pro 13 "RETINA!

  

  usually, when I develop for SWF, I can stretch and resize the window, but I can't do it with AIR.

  ANY HELP?

  Massimo

  Select "full screen" in the air from the ios settings panel.

• How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader?

  How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader? I got an error that the version number needs to be updated. I created a new record in iTunes Connect with version 1.1 and I took ownership of my current app 1.1 in air for iOS section in Flash.

  Check your descriptor file to make sure that it shows the updated version, too.

• Very strange bug with AIR and native process (Windows 7, EXE)

  Hi all!

  The situation is:

  I did an Application AIR, inside which a native process - running EXE file.

  I use Flash CC as IDE and tried to use the compilation as EXE with AIR 2.6 and 3.6 - results are the same.

  So I insert inside a control if the nativeprocess is supported or not and the native process is supported all the time.

  When I come to install the application and run it - the first attempt is good - everything works as a must: internal EXE is called by my Application with the necessary parameters so long I need.

  However if I close the application, then if it run not new - internal EXE is not starting at all, depends on number of attempts to restart the application.

  Then only is to uninstall, install back and then you'll be a session more successful EXE-internal requests, until the forthcoming resumption of the application.

  That's all.

  I tried to "google it" but without success. The bug is probably very rare.

  Help me please?

  Update: compiling with the Flash IDE of CC, he works all the time with no problems.

  Update-2: when I run EXE installator, there will be a notification "same version is installed, etc.', then choose 'Run Now' - he also works without any problem.

  Well, I found the solution and the answer by myself and it is here please:

  In the case with the same situation above, you will need to add a single line in your AS3 code

  nativeProcessStartupInfo.workingDirectory = File.applicationDirectory;

  And you will be so happy

• With Air 3.4 for IOS, how iPhone 5 are they treated?

  I've developed an application with Air 3.4 for IOS and it seems that the iPhone 5 automatically centers the application using the settings of the iPhone 4 960 x 640, rather than 1136 x 640. Is this correct? I have full-screen enabled in the settings of my 3.4 Air.

  If you include the splash [email protected] image, which would be a 640 x 1136 (your boot of landscape image rotates 90 degrees), it is enough for the iPhone 5 knowledge to fill the entire screen.

  However, if you have downloaded the app to iTunesConnect then, it would probably fail. This is because the standard AIR 3.4 ADT.jar file does not use iOS SDK 6.0. You can move using AIR 3.5 (http://www.adobe.com/devnet/air/air-sdk-download.html), or by getting the patched the ADT.jar file version (see this thread: http://forums.adobe.com/thread/1073656, in particular the "correct" answer upward).

  Once you have built with either 3.5 air, or used the ADT.jar of AIR 3.4 patched version, and you have the picture of [email protected] included, everything should be good.

• Compatible devices with air?

  Hello

  I saw a table of supported devices in the center of development, with air, but it does not any iOS device, just Android, apple is not on the list. ALL iOS devices are compatible? or just some versions?

  Thank you!

  The requirements for AIR on iOS are

  iPod Touch 4th generation, iPhone 3GS or 4, iPad

  OS 4 or later version

• Large (or really good... or even just good) games developed with air?

  Someone at - it links, articles or video clips, games, or applications developed in the AIR? Apps only I was able to find coverage of

  are those created by Bowler Hat games. They are perfectly respectable, but I'm curious to see what others have managed to do with air.

  This thread has some http://forums.adobe.com/thread/894327?tstart=30 examples

  Maybe the guys at Adobe should put a gallery or something together?

• Writing xml config with AIR

  Greetings!

  I know that this is possible. I can't think of a way to do that is very smooth, however. For the application, the user will enter data that will be stored in a config file to another Java application that is waiting for the file to be created (both on the same machine with air). Can someone tell me a simple example?

  The config itself is big enough and I'll probably use several viewstats to get all the information. Any help or advice are appricated!

  Build your user interface XML object and then write with the AIR API file wrigin.

• Newbie: faced with AIR-LAP1242

  I bought an AIR-LAP1242AG-E-K9 cisco and I can't do a thing with it. I have an another cisco AP which is an AIR-AP1242AG-E-K9 and who has a web interface and the CLI commands work. What does the 'L' in real terms? I know it is a synonym of light but I put an ip address in the LAP1242 but I can't no matter what web interface to the top and I just want to use the device as a wireless access point network have I bought a lemon?

  Tony,

  the 'L' does indeed stand for light; This means that, in order for this access point to the function must be connected to a Cisco of Lan controller (WLC) wireless. In light mode all the configuration is done on the WLC, AP is a bit like a dumb terminal. If your AP behaves exactly as it should be, as there is no web interface.  If you want to use this AP as your existing one, you need to convert to IOS and put an autonomous access point.

  To do this you will need and IOS Image for this AP, a TFTP server and follow the instructions in this link

  http://www.Cisco.com/en/us/docs/wireless/access_point/1240/installation/guide/124h_c3.html#wp1038660

  I hope this helps... Feel free to write it down.

  Thank you

  Kayle

• 1552e can be used as bridge .11n with AIR-ANT5117S-N?

  Hi all. Need help in the selection of wireless bridges.

  We need connect 2 remote buildings by a plant using bridges wireless outdoor, point-to-multipoint configuration. Distance between them is about 900 meters. Bandwidth is critical, so .11n is the best solution I'm sugest.

  Can we use 1552E as bridges .11n offline?

  Sector AIR-ANT5117S-N 17dBi antenna is compatible with this AP to .11n? I want to say that we're having to use the 3 antennas.

  Thank you very much.

  Hi, Maxim,.

  1550 series back does not support autonomous... its MESH and CAPWAP and need WLC to work...

  Opt for 1250 APs in stand-alone mode and then use fill between them over N... As far as I KNOW, I guess the speed N that Bridging is took supported but not recommended! Let me know if this answers your question!

  Please do not forget to note the useful messages!

  Concerning

  SUrendra