WLC 2504 with AP 1121 g

Similar Questions

• Cisco WLC 2504 with AIR-AP1131AG-A-K9

  Hello

  Can you help me for some info about AIR-AP1131AG-A-K9.

  I have a wlc 2504, but I don't know if the AIR-AP1131AG-A-K9-supported 2504 wlc.

  Can work this WLC 2504 with AIR-AP1131AG-A-K9 solution?

  If so, guide.

  Thank you very much

  Gezimv

  Check out this link. As long as you have software version 8.0.x 2504 version you can use 1131 AP with it. Nothing beyond software fate is more a series of support 1131.

  http://www.Cisco.com/c/en/us/TD/docs/wireless/compatibility/matrix/compatibility-matrix.html#56735

  HTH

  Rasika

  Pls note all useful responses *.

• Cisco WLC 2504 - Access Points do not reach the controller

  Hello world

  We bougth a Cisco WLC 2504 with two AIR-AP2702I-UXK9 Access Points. The problem is that the AP do not join the WLC.
  The output from 'show join ap stats' shows the following:

  (Cisco Controller) > view join ap stats summary all the

  Database Mac EthernetMac AP AP name IP address Status
  00:35: 1a: B1:A9:60 00:f2:8 b: f4:1 has: 9 c AP00f2.8bf4.1a9c 192.168.10.23 joined not
  00:35: 1a: C9:99:B0 00:f2:8 b: 77:b7:fc AP00f2.8b77.b7fc not joined 192.168.10.24

  (Cisco Controller) > show join ap 00:35:1 detailed stats to: b1:a9:60

  Synchronization phase statistics
  -For the synchronization request has received... Does not apply
  -For the synchronization completed... Does not apply

  Discovery phase statistics
  -Applications received discovered... 114
  -Answers success of discovery... 114
  -Discovery failure processing... 0
  -Purpose of the last unsuccessful attempt of discovery... Does not apply
  -Attempt to finally successful discovery time... 20:15:40.106 16 June
  -Discovery attempt ultimately unsuccessful time... Does not apply

  Join the live statistics
  -Join applications received... 57
  -Join sent successful responses... 57
  -Processing of the join request without success... 0
  -Purpose of the last unsuccessful attempt to join... Does not apply
  -Attempt to join finally managed time... 20:15:50.414 16 June
  -Join finally failed time... Does not apply

  Configuration phase statistics

  -Configuration requests... 114
  -Answers configuration successful... 0
  -Processing configuration failed... 57
  -Purpose of the last unsuccessful attempt to Setup... Invalid license in the application configuration
  -Attempt to finally successful configuration time... Does not apply
  -Time finally failed configuration attempt... 20:15:50.810 16 June

  Last the decryption of the AP details failure messages
  -Last message decryption failure reason... Does not apply

  Details of recent disconnection AP
  -Last AP connection failure reason... Does not apply
  -Last reason for disconnection AP... Unknown failure reason

  Latest summary join error
  -Type of error that occurred in the last... Application of configuration rejected LWAPP
  -Reason for the error that took place the last... Invalid license in the application configuration
  -Time which occurred the last error to join... 20:15:50.810 16 June

  Details of sign-out AP
  -Last AP connection failure reason... Does not apply
  Ethernet Mac: c 00:f2:8 b: f4:1 has: 9 Ip address: 192.168.10.23

  Would be grateful for the help.

  Best regards
  Marc

  Hi Marc,

  Make sure first that your controller has software code 8.0.x or above, if first better it. Here's the code recommended by TAC

  http://www.Cisco.com/c/en/us/support/docs/wireless/wireless-LAN-Controller-software/200046-TAC-recommended-AireOS.html

  Then, try the UX above deployment guide to begin. Under Advanced tab WLAN, you need to enable "of the first universal ap' in order to use this app provisioning & connect to the AP.

  If you have more than 1 AP, then you must start 1AP using this application. Other access points that you can feed them upward, while AP original is also powered, so they'll use protocal called NDP & start them automatically

  Let us know how it goes

  HTH

  Rasika

  Pls note all useful responses *.

• a WLC 2504 does support mobility with WiSM1 on the 6500 Series group

  If a WLC 2504 supports the mobility with WiSM1 on the 6500 Series group.

  Model: WLC 2504
  Software version: 7.3.101.0

  Model: WiSM1
  Software version: 7.x.x.x

  Yes and no.

  Yes, mobility is supported.

  No, because I don't personally recommend inter-controleur of roaming.  It is true when you are dealing with 4400/WISN-1.  This is even truer when you WLC running two (or more) different codes.

• New authentication active directory on wlc 2504

  Hello

  There is problem with very often a new authentication for servers active directory. Every time only if:

  -loose client wlan/wifi because of the wifi hole or low RSSI

  -output of build for a while customer

  -wlan loose customer due to problem with homelessness (slow, not perfect)

  There is possibility to keep authenticated users? I had hope that options: sleep customer, max session timeout, max idle timeout

  help, but they do not work for me :(

  My access point (2702) are all in a group flexconnect. WLC 2504 (8.1.102.0). My security in WLAN config is:

  Layer2: wpa + wpa2, PSK

  Layer 3: web policy, authentication with LDAP servers + asleep on client

  I always try to improve the radio covers n fast roaming (11 k, r, v) but if someone leaves the area wifi, to do authenticated which is a little annoying...

  Thanks for any advice or an index

  Peter

  You want people who re - attach to your network for to re-authenticate.  It's a good thing.  We do not want people using the old credentials, or expose you to a security breach.

  This behavior is by design - and good.

• WLC 2504 HA N + 1 license

  Hi people,

  I am pondering whether it is possible to combine the role of ordinary WLC WLC HA N + 1 SKU.

  for example if I have 2 2504 with 15 AP respectively, I can make one of them HA N + 1? or I have to choose some WLC and make it completely separate HA N + 1?

  Hi Ruslan,

  Please see the below can be these wil help you.

  Click here: N + 1 HA overview

  Deployment Guide

  and

  https://supportforums.Cisco.com/discussion/11758901/ask-expert-high-Avai...

• Cisco WLC 2504 internal DHCP does not work properly

  Hi all

  I m trials with a Cisco WLC 2504 and some APs of 1832. I set up a DHCP scope on the interface of the controller with 2

  a large number of different configurations, but the DHCP protocol does not work and Don t Access Point to obtain an IP address. My first question: is it possible to do DHCP for Access Points or only for wireless clients?

  These are my interfaces:

  Interfaces

  

  Interface of the PA-Manager:

  Interfaces1

  

  Interfaces2

  

  My DHCP scope:

  Scope1 DHCP

  

  Portee2 DHCP

  

  Advanced DHCP:

  DHCP Scope3

  

  I forgot something? Is there anyone using DHCP for its access points?

  Thank you!

  Hello

  On Cisco WLC internal DHCP, you can add the option 43 to say where APs must register. In this case, they will try to resolve the DNS CISCO-CAPWAP-CONTROLLER or CISCO-LWAPP entry.

  Let me explain briefly how AP-Manager works on WLC:

  1. Boots of Access Point and sends a discovery request to the management interface of the controller using the intellectual property you configured as DHCP Option 43 (as described above, it can be resolved by the DNS entry)
  2. Controller, sends it a response discovered that contains the name of the system, addresses AP-Manager, the number of access points already connected to each interface AP-Manager and the overall capacity of the controller.
  3. Joints access point controller using the less loaded interface AP Manager.

  With this, every AP Manager must have a good configured interface and be connected to a different port, no LAG.

  I drop a post here sometimes there is which might help:

  https://supportforums.Cisco.com/document/118311/configuring-multiple-AP-...

  Thank you

  PS: Please do not forget to rate and score as correct answer if this answered your question

• WLC 2504 cannot access the GUI...

  Hi all

  I'm not sure what I did wrong, the 2504 itself has only 4 ports and no port management but I heard it's actually port 1 (even if there are no labels for this). That's what I've done so far to try to access the GUI:

  in CLI mode, I have

  (1) put AP managament address like 10.151.55.129 255.255.255.224.

  (2) I have activated the adminmode on port 1, which I assume is management port and enabling admin mode is the same as "no shut" on switches I guess; Here is the command I entered:

  (Cisco Controller) config > adminmode port 1 turn on

  (3) enabled HTTPS/HTTP through commands:

  (Cisco Controller) config > activate network secureweb

  (Cisco Controller) config > activate network web-auth secureweb

  (Cisco Controller) config > network webmode enable

  (4) I then reset system and verify that the changes took place to help display the synthesis network, as shown below. I also activated mgmt via dynamic interface to see if it makes a difference:

  RF-network name... TEST_WIFI

  Web Mode.................................... Enable

  Secure Web view... Enable

  Secure Web Mode Cipher-Option high... Disable

  Secure Web SSLv2 Cipher-Option Mode... Disable

  Secure Web Mode RC4 Cipher preference... Disable

  OCSP........................................ People with disabilities

  Responder OCSP URL...

  Secure Shell (ssh)... Enable

  Telnet...................................... Disable

  Transfer Ethernet multicast... Disable

  Transfer of broadcast Ethernet... Disable

  Multicast/Broadcast AP mode... Address multicast: 225.225.225.225

  IGMP snooping... People with disabilities

  IGMP timeout... 60 seconds

  Interval between IGMP queries... 20 seconds

  MLD snooping... People with disabilities

  MLD timeout... 60 seconds

  Interval between MLD queries... 20 seconds

  Period of inactivity of the user... 300 seconds

  ARP timeout... 300 seconds

  Cisco AP by default Master... Disable

  Join AP priority... Disable

  Mgmt interface wireless... Disable

  Mgmt Via dynamic Interface... Enable

  Filter MAC bridge Config... Enable

  Safety of bridge mode... EAP

  Mesh full sector DFS... Enable

  Relief of AP... Enable

  Support CMCC Auth Web... People with disabilities

  Web Auth redirect Ports... 80.1

  Web Proxy Auth Redirect... Disable

  Bypass-Web Auth Captive... Disable

  Web secure Web Auth... Enable

  Quick change SSID... People with disabilities

  Discovery of the AP - IP NAT only... Activated

  IP/MAC Addr binding Check... Activated

  Status of CCX-lite... Disable

  oeap-600-WLAN-dual... Disable

  oeap-600 local-network... Enable

  mDNS snooping... People with disabilities

  mDNS interval between requests. 15 minutes

  (5) I installed my PORTABLE NIC to be 10.151.55.20 255.255.255.224 and connected to port 1 on wlc 2504; but I can't ping 10.151.55.29 nor do I navigate to https://10.151.55.29/. The port appears upwards (the flashing green lights on port 1 and Portable NIC also Flash).

  Any help would be appreciated

  If your connection to your laptop direct to port 1, then you have untagged the management vlan. Now you have configured for vlan 10, you must set to vlan 0.

  You will then be able to ping to the management interface and connect to it through the user interface.

  Sent by Cisco Support technique iPhone App

• Don't WLC 2504 media HA or not?

  We have Cisco WLC 2504 (software version: 7.3.101.0) in our network and management access 10 points, we are now trying to build High Availability (HA) in the WLAN settings. So I need details that this existing platform is capable of supporting HA.

  Required clarification as follows.

  1 support WLC 2504 HA?
  2. If the AP is supported if a license is required to enable it.
  3. What is prerequisite software to enable it.
  4 Setup guide to enable HA

  Attached: existing WLC BOMs

  HA PA SSO:

  http://www.Cisco.com/en/us/products/ps10315/products_tech_note09186a0080bd3504.shtml

  HA N + 1

  http://www.Cisco.com/en/us/docs/wireless/technology/hi_avail/N1_HA_Overview.html

  AP high availability

  http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a008064a294.shtml

  Thank you

  Scott

  Help others by using the rating system and marking answers questions as 'response '.

• SG 300 and WLC 2504

  Someone in the community all managed to connect a controller wireless lan to a 300 SG? I know that the WLC 2504 needs to be connected to a switch L3, but also a gigabit ethernet port. I plan on upgrading the firmware of the SG300 to version 1.3.5.58. Since the 1st version seems to have some problems using L3 switching.

  Thank you

  -Bill

  The biggest drawback for most people is the VLAN tagging. The switch in many ways is like a switch in IOS, but it is not simply a switch of IOS.

  Just keep in mind that if you make a layer 3 VLAN (assigned IP address to the VLAN), if sure the default VLAN has first of all a static IP address then go to make interfaces VLAN additional.

  config t

  int vlan 1

  IP address 192.168.1.254/24 or anything else you want.

  Continue to add the IP address and VLAN

  config t

  database of VLAN

  VLAN 100

  int vlan 100

  IP address x.x.x.x /xx

  Then you can make the trunks, etc. for VLAN desired.

  config t

  int gi0/1

  switchport trunk allowed vlan add 100<- this="" will="" make="" the="" port="" vlan="" 1="" untagged,="" vlan="" 100="">

  Most people transitioning to this switch get caught up on these 2 things for some reason most any.

  If you need help to set up the switch, you can always call the HWC, they have 24 hour support (without contract) or you can always feel free to hit me up (free support too)

  -Tom
  Please mark replied messages useful

• WLAN how can I use with Cisco WLC 2504

  I have two companies co-implantant and to decrease costs would like to implement a single Cisco WLC and separate traffic with the VLAN. I see that the controllers of the series Cisco WLC 2500 min supported number of WLAN: 5 and max: 75. That means actually? When I create more than 3 WLAN on a controller, the best practices page advises me against the use of more than 3 WLAN. Is it good to have more than 3 Wireless LANs, and what are the penalties to do?

  5 and 75 are the number of points WLC can support access light weight.

  By default, 2504 can manage up to 5 access points. You can increase this number up to 75 by adding the new license.

  Also, it can support up to 16 different WLANs (SSID)

  FC

• Recommended configuration of WLC 2504 SSID with AD

  Hello

  I would ask, what oyou d think that is now the best practices and recommended solution how to configure SSDID on 2504 WLC for the following scenario. I'm new to WLC and would like to secure network.

  -any type of customer must be supported (08/07/10 win, mac, linux, iOS, android, windows mobile)

  -authentication on Win 2012 R2 NPS as RADIUS

  -any requirement of certificate client (we don't want PKI configuration for now), we want to just WLC certificate as an authentication point

  is enough [WPA2] [Auth (802. 1 X + CCKM)] who will have radius configured?

  Thank you

  Well Yes, check these

  http://www.Cisco.com/c/en/us/support/docs/wireless-mobility/WLAN-Securit...

  http://www.Cisco.com/c/en/us/TD/docs/wireless/controller/4-2/configurati...

  Eat local point concerns small size as a small office deployments.

• Dynamic management of the mobile AP management interface to another dynamic interface (WLC 2504)

  Situation/configuration is the following:

  -2504 WLC (8.1.131) with a total of 22 AP is connected.

  -Several WLAN active each with its own interface (dynamic)

  -L' (static) management interface is the option "Activate the dynamic management of AP" enabled.

  -The four physical interfaces of the WLC remain TROLLING configured.

  What is the problem:

  In the current configuration, the management interface is in the same vlan as the AP we now want to move the management interface to a different VLAN, but keep the AP in the vlan current. The idea is to move the management interface to its new vlan and disable "enable dynamic management of AP". Then, create a new interface (dynamic) in the same vlan as of AP and select 'turn on the dynamic management of AP' on this interface. Configure it as it is no problem but is does not work. The AP will record is no longer with the WLC.

  Is there something I may be missing why this does not work?

  Richard.

  Yes, that's the gist of it.

  I recommend always making a capture packets if only just for educational purposes and to see how this works in action. I found it interesting when I did in the lab here.

• WLC 5760 with AP1121G

  Guys,

  I ve got a thing who me it s kinda weird. I m trying to make a working group with wlc 5760 and an 1100 AP mode standalone, but all I get it s this error to the AP.

  * 18:45:05.639 1 Oct: % DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: WPAIE not found and required

  * 18:46:03.639 1 Oct: % DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: Rcvd response of the channel 11 8861 0c68.03ea.4073

  * 18:47:47.639 1 Oct: % DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: combining

  configurations are:

  SSID dot11 TEST

  open authentication

  authentication wpa key management

  WPA - psk ascii 7 1416000E0F0C2379747960

  interface Dot11Radio0

  no ip address

  no ip route cache

  encryption ciphers aes - ccm mode

  SSID TEST

  base speed - 1.0 2.0 basic basic-5, 5 6.0 9.0 basic-11, 0 12.0 18.0 24.0 36.0 48.0 54.0

  station-role workgroup bridge

  Bridge-Group 1

  Bridge-Group 1 covering-disabled people

  and on the WLC 5760,

  WLAN TEST 7 TEST

  No ssid broadcast

  customer vlan 7

  no security wpa akm dot1x

  Security wpa psk key set ascii 0 arechi2013 akm

  session-timeout 1800

  no downtime

  Sho wlan name TEST

  Security

  802.11 authentication: open system

  The static WEP keys: disabled

  802. 1 X: disabled

  Wi - Fi Protected Access (WPA/WPA2): enabled

  WPA (SSN IE): disabled

  WPA2 (RSN IE): enabled

  TKIP encryption algorithm: disabled

  AES encryption algorithm: enabled

  Management key auth

  802. 1 x: disabled

  PSK: enabled

  CCKM: disabled

  CKIP: disabled

  Can someone help me?

  1121 are not supported.  Here's a matrix showing which is taken in charge and what is not.

  http://www.Cisco.com/en/us/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html#wp98682

  Thank you

  Scott

  Help others by using the rating system and marking answers questions as 'response '.

• WLC 2504 UPGRADE AND LAP 2702

  Hello.

  We are going to upgrade a WLC: AIR-CT2504-15-K9 for free: 8.0.120

  This is a new installation and we will install 15 TOUR of this model: AIR-CAP2702E-A-K9.

  We went through the compatibility matrix and release WLC 8.0.120 correspond to LAP: 15.3 (3) JA4.

  the upgrade mention WLC process which, after the upgrade of the WLC, completed the upgrade of the TOUR begins automatically, so I have a few question:

  1. I need to plug all the way AROUND (15 LAP´s) to the cable network so they can be automatically upgraded?
  2. This release is selected automatically during the TOUR?
  3. Y at - it a GUI WLC option where I indicate where the exit for LAP (15.3 (3) JA4?)
  4. I tried to download version 8.0.120 for 2504 WLC but need a Partnert Lincense. Would you mind giving a link where I can download this version?
  5. We assume that, above all, he must perform a communication between the WLC with TOWER (15) using the current version, is this true?
  6. If the 2504 WLC and LAP 2702 have different (different version of matrix compatilibilty) is it possible to upgrade the version of the TOUR? can they communicate with each other so we can proceed with the upgrade?

  Thank you in advance your response earlier.

  Attn.

  Roger Majo

  Hi Roger,

  Please find below the details of my side which will be useful for you.

  I need to plug all the way AROUND (15 LAP´s) to the cable network so they can be automatically upgraded? Yes... Or whenever you connect to the network access point it will automatically connect to WLC through DHCP option

  This release is selected automatically during the TOUR? Controller of which is running

  Y at - it a GUI WLC option where I indicate where the exit for LAP (15.3 (3) JA4? > Show ap image all the )

  I tried to download version 8.0.120 for 2504 WLC but need a Partnert Lincense. Would you mind giving a link where I can download this version? Contact account executive-paper license (check you have valid Support Cisco)

  We assume that, above all, need a communication between the WLC with TOWER (15) using the current version, is - that true? No need... AP will automatically for the last reason that is available in the controller

  If the 2504 WLC and LAP 2702 have different (different version of matrix compatilibilty) is it possible to upgrade the version of the TOUR? Can they communicate with each other so we can proceed with the upgrade? Explained earlier

  Thank you

  Sam