WMV file blocking my first pro
I know that all the limitations of the wmv files in terms of editing and quality.
However, I need this one little clip that is be a WMV. file. (only 15 MB)
When I import it, it blocks my first pro.
all ideas
The reading is very different, as the edition. When reading, the reader has to decode the file, whereas with the edition, the NLE to first decode the file, and then create just an internal "proxey' to view, while it takes 'notes' on what you want to do with the data in the original file, export.
The Adobe programs are very picky when it comes to assets that interfere. Header information of files must be written correctly, and all aspects of the file must be created with the specifications. This format.
It is not uncommon to have PS gag on a JPEG to another program, but see other less strict programs, very well open it. With the AV files, it is also common to have VLC play it fine, where WMP and others just can't do. I use VLC or MediaPlayer Classic for most, and the two have VERY lenient, but they saw several files that plays very well in one, but the other crash.
Good luck
Hunt
Tags: Premiere
Similar Questions
-
Help, I can't open any of my files in adobe first pro cc 2014, using the 30 day trial of creative cloud, every time, I try to view my files, it crashes!
Hi Sheila,
Try this:
Before you import your files, go to file > project settings > General and change the rendering engine video software of Mercury playback engine only. Click OK, and then select Remove previews. Then import your files.
I would like to know if it works.
Thank you
Regalo
-
Canon XC10 MXF file import failure first Pro CS6
Does anyone know why can't import video MXF files from the Canon XC10 to first Pro CS6? I searched for a process / workflow that does not include having to use an mxf converter. I looked at a number of different suggestions on the web. I read the following article http://www.adobe.com/content/dam/Adobe/en/products/premiere/cs6/pdfs/adobe-premiere-pro-cs 6-canon-workflow - guide.pdf which indicates it should not be a problem with the import mxf to the first pro cs6. I also used the Canon XF Utility - once again unfortunately, I still got the message "the importer reported a generic error. Other Adobe applications, faced with this format include Prelude and Media Encoder.
I'm on Windows 10. I hope that someone in the community will have technical knowledge to help. Or maybe even staff Adobe might be able to offer suggestions. Thank you.
If you download the Canon XF Utility software,
You load the map and export in MXF format (that's all) on the hard disk.
Import in first. That's all.
Sorry can't find a page in English, but the softeware is available in different languages
-
* URGENT: * MEDIA IS offline for Mp4 files after update first Pro CC to 8.1
Hello
I've updated recently for first pro CC 2014 and I'm working on a project that is already overdue.
I had a few little problems, so I thought that after upgrading to the most recent version, all would be well.
I just started first and opened my project and had an error message like this guy
Premiere Pro CC 2014 seems corrupt projects created with earlier versions
Then I deleted the files preference and the project could be reopened.
But the MP4 files did not open and the MEDIA OFFLINE imagem
(and I have a LOT of MP4 files that worked absolutely fine before)
I tried to make the connection again, but it didn t work.
I tried to drag and drop files MP4, it didn t worked too. (media file is)
I renamed the folder ADOBE \user\appdata\local and roaming twice.
I tried to start with ALT SHIFT to remove preferences againa - didn t worked too.
I tried to reinstall Quicktime.
I tried to reinstall the K-Lite codec pack.
I REALLY need your help before the formatting and all from scratch.
Thank you and best regards.
Lucas Selbach
So if you came here looking for an answer, this is what worked for me:
(be told me voce quer uma resposta em Português)
-Exit all software adobe (including clouds)
-Remove the preference (adobe) folder in my documents.
-Rename the folder Adobe \userfolder\appdata\roaming and \userfolder\appdata\local to old.adobe
-Uninstall a codec package that you may have installed
-Uninstall first via Add/Remove programs
-Find *.xmp files and remove all the
-Rendered remove files from your project folder too.
-Restart the computer
-Use a registry utility to clean your computer of the tracks (I use Glary Utilities)
-Install the first Pro CC
-Restart the computer
-Install Quicktime 7
-Restart the computer
-Everything should be good now.
=)
Good luck!
Concerning
Lucas Selbach
Brasil
-
. ARI not taken file format supported first Pro CC
Hi all
I'm having some trouble with the ARRI Raw for first Pro CC plugin. I installed the plugin according to the instructions, but when I navigate to the .ari files in the media browser, there is a REAR logo instead of a thumbnail of the clip and when I try to open the clip in the source window, it tells me that the file format is not supported. Anyone can shed light on how to solve this problem?
I can open their fine in AE.
See you soon,.
Pete
A reinstallation of Office creative cloud and Premiere Pro solved my problem. I am able to view ari natively files now.
See you soon,.
Pete
-
Problem with importing audio files .mts in first pro cc 2015 project
When I play the video in preview the audio plays but does not appear when his sliding in the schedule of the project. I had not updated for first pro 2015 and tried and still no audio is displayed. I tried to remove the tray that the audio appears in and re import the images via the media browser and still no sound. I'm trying to start the final cut (after recording some new images in Cuba!) for a documentary that I worked on last year, so I would be very happy if someone could help me on this, its quite frustrating. Furthermore, I have imported .mts, pictures back in August for the same project and had no such problems. I use a 2012 end imac 3.2 ghz, 16 GB 1600 mhz
Thanks in advance a mil!
Charlie
Probably forgot to patch source audio track.
Adobe Premiere Pro help. Source patch and the targeting of the track
-
How can I make my AVCHD mov. files of work first pro?
I used the Panasonic HDC-SD60 for a short film for the work. This has on about 40 clamps with about 3 hours of footage however when I import files .mov from the audio media browser seems fine but the film is in a kind of slow-mo and out of sync. I want to change and make the post production using Adobe pro and AfterEffects first. However, the film seems to work in final cut X. There is no lag with playback on quicktime either. What is this project? I read on variable frame rates, it is seems more common among iPhones and tablets? Is this something that the panasonic do as well? Is there a solution? Or should I jump ship and settle for a somewhat more limited features of Final Cut?
Copy the card hard disk. Do not use iphoto or lightroom, but ingest directly in first via the media browser.
See how it will work.
-
5.5 k HD RED Dragon file problem in first Pro CC
Hello world!
I currently edit a project in first cc pro who turned on the new camera of RED Dragon.
First is incredibly impressive in the treatment of all the huge files and view them in the timeline panel.
However, I have found that some of our materials that are slaughtered in a resolution of 5.5 k HD (5376 x 3024 px) are not displayed in first at all.
I can import the files, I can watch their preferences as the balance of whites, duration and rate display etc.. BUT the first guard, showing me that the yellow banner 'Media pending' if its in the source monitor or timeline.
All other formats like 6 k, 5 k, k from 4.5 to display different rate work very well.
I don't know if it is because of this resolution, but that's the only difference to the other files that work very well and were recorded on the same disks a few minutes before that material 5.5 k.
After effects and RedCine X Pro work fine as well.
There may be a bug and I already reported it to Adobe. But maybe someone has already solved the problem and find a good job autour or something.
I downloaded a file k R3D 5.5 on WeTransfer, if you want to check: http://we.tl/AyokYi4dJw
OS: Windows 7, (6.1)
Graphics card: GeForce GTX 770 4 GB
CPU: Intel i7 4770 k
Premiere Pro (Version 7.2.1) CC
Thanks for your help!
Burak
The video works fine here with 7.2.2. on Windows 8.1.
-
Problem of blocking in first Pro CC edition
I have a draft edition blocking, source and target calendar is implemented according to the needs. I made the multicamera editing and saving the file. When I open the file saved, single track in the source file displayed in the target sequence. All the source sequence Flickr photos are visible, the file exactly as it was when the multicamera editing has been completed. It looks like a bug to me.
Steve Keller
Movies of differentials
Hi Steve, what version of Premiere Pro are you running?
Thank you
Kevin
-
Hello
I get to importer my Photoshop layers in first, but when I change them, the update does not automatically as before, not at all see!
Thank you for your help :-)
I saw it on occasion.
I use replace the images with the same file.
-
Nikon D4 video Files 'Stuttering' in first Pro CS5
I use a Nikon D4 filming for about a month. I have change a 15 in MacBook Pro Dual Quad 2.2MGh with 8 GB of RAM. I turned on a Nikon D3s and video files are 720 x 1280 at 24 p avi. The D4 is set at 720 x 1280 30 p .mov and are H.264. When I'm editing D4 files, I get a lot of stuttering and will not play in real time. Anyone encountered this? Do I need to encode my D4 for Apple Pro Res files for editing? If so, suggestions on a coder?
There is a work around on windows that can solve the problem. Try to rename to .mpg .mov clips.
I don't know for certain who work on a Mac, because I understand that Macs are not based on the extensions of files like Windows is.
-
the first Adobe elements corrupts the WMV files
Running Windows 7.
When you import WMV files into Adobe first Elements 4.0, half top of the image is black.
Adobe is reported as a problem with Windows XP and suggests to remove some updates.
But whence this permission Windows 7 users? Adobe is silent on this issue.
Adobe has a KB on this issue on Windows 7 and Windows XP.
After you apply the improvement kb2834904 kb2803821 Windows 7 or XP, WMV files imported into Adobe Premiere Pro, Adobe Premiere Elements, or After Effects look damaged on the screen. For example, they appear as a video half frame on import.Similarly, videos exported out of these products as WMV files appear corrupt.That covers it. -
Import .srt file in first pro cc and CS6
I'm trying to import file srt in first pro cc and CS6. Its not appearing is not in my preview window. I can see the file captioned on my calendar above my video clip, but the captions are not appearing on the preview window.
Post edited by: Kevin Monahan
In the latest version of the CC of the BODY, to import a. SRT will be the file be interpreted as a 708 1 file captioning service. If the value your monitors (via icon wench) CEA - 708, Service 1.
Body CS 6.0 does not support SRT files.
-
First Pro CC and the lack of audio tracks for .mts files
Hello guys,.
I used to edit my files .mts with first Pro CC with no problems until yesterday.
Now I import my file .mts (made with a Sony VG900), but the first does not recognize the audio tracks (which I hear fine with VLC).
I tried changing the extension in .m2ts, but he did not, I also tried to reinstall the first but, even once, it didn't work and I tried (I was desperate) to install the CS6 first just to check if the problem is maybe about the CC version. Guess what? It did not work...
I tried also to convert the file with the encoder in .mp4, but after the conversion, I can't hear the sound with VLC and, of course, this does not work on the first.
Don't you think it's a first question or a problem of file?
I used these same files for other videos (as a http://www.youtube.com/watch?v=H1X5vsZ-5yI) and I had no problem. Then I updated the first, I moved the files in the other folder, and the problem came to life.
Any idea?
(I'm waiting for my colleague to send me a new mts file just to check if I accidentally damaged the 'old').
See the solution for the problem of #1 in this doc: known issues in Premiere Pro CC 2017 (November 2016)
-
MTS reading accident first Pro CC
Hello users,.
I've upgraded to the latest version of first Pro CC. recently, I noticed that playing MTS files blocking my first session. A window appears that informed me that the application has encountered an error and needs to close.
Import MTS files brings no question. First only acts upward when I try to read them.
The MTS files worked in past iterations of first (5.5, 6) so I wonder when this problem appeared.
Thank you!
Hi Emoral7,
Please use the Adobe Forums;
Please try to follow this:
http://helpx.Adobe.com/Premiere-Pro/KB/audio-video-glitches-AVCHD.html
Happy editing,
Sandeep
Maybe you are looking for
-
Satellite U400-12R: Toshiba Power Saver does not appear in the taskbar in Win XP
I have some problems with the utility - Toshiba Power Saver on XP. After installation, the program is not displayed in the taskbar and when I stopped the operating system - it is an error with TPS. Windows xp sp2, the pilot of GST is taken from the o
-
I'm trying to help a friend install sp2 to vista Home premium. I tried all the tips I can find nothing on this forum (and google) does not. However, I can't find any post (or article) installation involving a failure of sp2 with 0x800705B3 error code
-
Each match are freezing after installing DirectX 11! Help me please?
Hello I'm leaving early. I bought Civ V and installed and also DirectX 11 with her. After that all the games on my computer freezes when I start it (incl.: Football Manager 2010 and Napoleon: Total War). I noticed that my graphics (ATI Radeon hd 3870
-
Available to shrink drive space is limited to 180 MB! Help, please
I want to create partition of my drive "C:\". "hard drive to install windows 8, so that when I went to shrink the drive to allocate the remaining space to a new partition, it shows only 180 MB of retractable space available! even though that my car h
-
Original title: error Login screen saver. When at the login screen Windows screen saver is not running. The circle of 'thinking' of the mouse pointer starts to turn, but it just goes back to the login screen. I created all 4 strings in the HKEY_USERS