WordPad has out check?

Similar Questions

• can you multi delete with out checking all of the boxes.

  Can u multi delete with out checking all of the boxes.

  This is for email, but it is almost global.
   
  To remove all the: select one and Ctrl + A will highlight all. -Delete.
   
  To delete a section: highlight the first one you want to remove. Scroll to last and click while holding down the SHIFT key. -Delete.
   
  To delete several messages that alternate: hold down the CTRL key while you click each message in order to highlight. -Delete.

• Hi, I have a PDF form that has multiple check boxes. Some boxes have values (off, yes) that others have just (Yes). How can I get the value of "Off" to all of the other boxes as well. Any help is greatly appreciated.

  Hi, I have a PDF form that has multiple check boxes. Some boxes have values (off, yes) that others have just (Yes). How can I get the 'Off' the value assigned to all the other boxes as well. Any help is greatly appreciated.

  'Off' is the default value of any box when it is not checked. It can not

  be changed.

• WordPad has taken over my computer, the icons and all!

  In attempting to change the default value of the unknown for a program that can open zip files, I tried to use WordPad, given that Windows 7 appears to have eliminated the Windows Explorer as default.  Suddenly, I realized everything in my bar tasks, and almost all of my programs are opened as WordPad, with what looked like hieroglyphics to text!  I ran and no infection, they came and I am wanting to do a restore of the system to yesterday, but that, too, opens as WordPad! This zip file has caused me too many problems and I was not able to figure out how to open again!  At this point, I'm afraid to do so, even if I had looked forward to receive the product.  Same MSE opens as WordPad, as does everything else.  I am able to open some sites only by choosing links in help!  So may of you brilliant technicians help me out somehow from this quagmire?

  Thank you very much!

  Windows 7

  THAT IS TO SAY 11

  The zip file contains a program, or just compressed files? Usually if a zip file contains a malware

  It does not infect your machine so that extract you it or run an executable that installs.

  -Notepad is usually the best option to open unknown files to read the text.

  A third program open source, Notepad ++ , it's even better.

  Hieroglyphs would likely be machine code, not text.

  -C' is weird that all file extensions appear to have changed to Wordpad. Maybe the zip file

  contains a number of files with commonly used file extensions, and all of them have changed.

  I'll waffle with what data I can offer still...

  -Try using the Startup Option - last good known Configuration

  (Click Start > restart and after Windows shuts but before it begins to restart start tapping)

  the F8 key. This will display the Boot Options menu).

  -If restore Boot Options didn't help, you may have to do some registry entries.

  It is also possible to restore default file with a command prompt extensions, or a lot

  file, but I don't know how to do this.

  by default-file-type-associations-restore

  - Or - maybe if you install 7 - zip (see below) you may be able to change the file association for zip files

  7 - zip, and perhaps the rest will come as a result (I dare not experience)?

  ------

  -When you use the Open or Open with options you must make sure to clear the check box

  next to - 'always use the selected program to open this kind of file '.

  This will stop with the open option to change the file Association for all files that use this extension.

  (eg - .txt, dll, exe, and so on).

  -Why MS made 'always use the selected program to open this kind of file '.   the default value is a mystery

  for me, as I very rarely want to change the file extension to always use a certain program, but there are many things that will try to open, and which are readable with Notepad.

  -------

  I use 7 - zip, which is very popular for extraction and compression of files.

  Download the msi version that fits your Win7 - 32 or 64-bit. Run the msi file to install.

  7-zip

  -------

  If you do not install 7 - zip - (windows Help and Support on the start menu)-

  - To extract a single file or folder, double-click the compressed folder to open it. Then, drag the file or folder the file is compressed to a new location.

  -To extract the entire contents of the compressed folder, right-click the folder, click on Extract all , and then follow the instructions.

• Instructions to remove the search engine do not work, the "delete" button remains grayed out check marks independently. Is there another way that actually works?

  The Firefox Support instructions below do not work in version 36. The button 'delete' is never gray State asset once the unwanted/s search engine are checked for removal. I tried one at a time and in groups, it does everything just as they suggest below.

  Delete a search engine

  You can remove search engines, that you don't need by performing the following steps on the search bar in the toolbar or on the page tab.

     Click the search engine icon and select Manage Search Engines... to open the search engines manager.
     To remove a search engine, select it from the list, and click Remove.
  

  If you accidentally delete a default search engine, click on restore default values to recover the default search engines.

     If you accidentally delete a search engine that you installed, you must re-install it.
  

  I found the solution, the surprisingly simple. Thanks to everyone for trying, but against all the recommendations after a new analysis of malware, virus and upgrade to the latest version released on March 5, 2015... Here is the fix:

  Left click on the dropdown search button, then left click on the "change search settings." Ignore completely the checkboxes as suggested by Mozilla. The text of the search engine you want to delete to highlight in blue in the Middle, click on the grey Out button below should become active. The only function of the boxes by the search engine will make them visible or not when using the search box in Firefox. The solutions proposed by others seems logical, but I learned more than 4 decades as a technician in computer science, opt for the simple solution first. Thank you all for your suggestions, this fix works for versions 36 and 36.0.01on Windows 7. I guess it should work for other OS also.

• Update and a new iphone software installs "your network timed out check your network settings.

  I need to download and the software update for my iphone and its half way done when it stops and I get this error screen that says that your network has expired, please check your network settings. Please someone tell me what to do

  Hello

  Check with iPhone Support.

  iPhone Support
  http://www.Apple.com/support/iPhone/

  I hope this helps.

• Computer froze while then restart using Yahoo, has started checking the files on the drive.

  Original title: is there a MicrosoftXP NTFS file system? If SO, is there a file 875?

  Working yahoo trying to open the file that was sent when the computer locked upand I had the switch works / stop. When I rebooted it came up on top of the page that opens, he Microsoft XP in the upper right corner with the logo but not color. She has also shown a verification program files on three washers on a message from a third party came this missing 875, after a short wait of the comuter open file. It is a real program under XP or is a person playing with the computer? I'm computer dumb and need all the help I can get.

  Hello

  It seems that the computer has started when you have turned on the computer running chkdsk.

  CHKDSK is a valid Microsoft XP program and it checks bad blocks on the disk.

  As Yahoo application was running at this time, the 875 file could be belongs to it & seems to be corrupted.

  For more information, refer to this link: How to make Windows XP disk error checking?

  I recommend you to reinstall the application that was running at this moment of time if they are not running properly.

  
  Reference: How do I change or remove a program in Windows XP?

  Hope the helps of information.

• COD installed via CodeModuleManager has "error checking".

  I searched the forums for all the threads on CodeModuleManager and creation of modules by program. I managed to gather enough information to get the code below, but it still does not have 100%. For brevity, I've deleted the error handling code.

  I can run my code below and it creates modules. I'm not trying to install over a previous installation, it comes to intall the app for the first time. However, the application that installs it will not work when I click on the application of the new icon (the app is signed). When I click on the newly installed application icon, I get this error message on the home screen (the application never starts). The message reads the following:

  Error at startup MyApp: Module 'MyApp' has verification errors.

  But if I reboot the device or the Simulator and click the icon of newly installed, it works without problem. The newly installed application has another point of entry that runs at startup which is for a process in the background in the application.

  When I try this code with a different and much smaller application that is just a simple file of COD it works and I can run the newly installed application immediately after installation.

  But when there are several cod brothers I noticed a few interesting releases in the debugger console. In the loop where I call CodeModuleManager.saveNewModule, I see the following output from the debugger

  CMM: Add MyApp (3972)
  AC: new CRC = 557
  CMM: Add MyApp-1 (4010)
  AC: new CRC = 558
  From level 7
  From MyApp
  Research installed codfiles alias "MyApp-2".
  Research uninstalled codfiles alias "MyApp-2".
  Module "MyApp-2' not found." Error at startup MyApp: Module ' MyApp-2' not found. "
  MIDlet PushRegistry startup
  MIDlet startup PushRegistry finished
  From net_rim_process_launcher
  Net_rim_process_launcher (156) started
  CMM: Add MyApp-2 (4013)
  AC: new CRC = 559

  Note that after that MyApp-1 is added that you see level 7 starts and triggers another startup auto entry point. But now MyApp-2 is not yet added, and he complains about not finding the MyApp-2 module.

  This message on MyApp-2 is related to me being able to run the newly installed application until I reboot? If not, is there any ideas on why I can't launch the new application immediately?

  String[] codUrls = new String[] {    "http://www.example.com/MyApp.cod,    "http://www.example.com/MyApp-1.cod,    "http://www.example.com/MyApp-2.cod ");
  
  CodeModuleGroup codeModuleGroup = new CodeModuleGroup("MyApp");codeModuleGroup.setCopyright("2009 MyCompany");codeModuleGroup.setDescription("MyApp for BlackBerry");codeModuleGroup.setVendor("MyCompany");codeModuleGroup.setVersion("1.0.0");
  
  //limit first module to 60KB since it must be under 64KB as mentioned in docsint firstModuleMaxSize = 1024 * 60;
  
  HttpConnection httpConn = null;InputStream inputStream = null;
  
  int[] newModuleHandles = new int[codUrls.length];
  
  for (int i = 0 ; i < codUrls.length ; i++){    httpConn = (HttpConnection) Connector.open(codUrls[i], Connector.READ_WRITE, true);    httpConn.setRequestMethod(HttpConnection.GET);    int responseCode = httpConn.getResponseCode();    if (responseCode == HttpConnection.HTTP_OK)    {        int responseLength = (int) httpConn.getLength();        byte[] responseBytes = new byte[responseLength];        int bytesRead = inputStream.read(responseBytes); intputStream.close(); httpConn.close();        if (bytesRead > firstModuleMaxSize)        {            //write the first part            newModuleHandles[i] = CodeModuleManager.createNewModule(bytesRead, responseBytes, firstModuleMaxSize);            //write the rest            CodeModuleManager.writeNewModule(newModuleHandles[i], firstModuleMaxSize, responseBytes, firstModuleMaxSize, bytesRead - firstModuleMaxSize);        }        else        {     //less than 60KB so write it all in one module            newModuleHandles[i] = CodeModuleManager.createNewModule(bytesRead, responseBytes, bytesRead);        }    }}
  
  for (int i = 0 ; i < codUrls.length ; i++){    if (newModuleHandles[i] != 0)    {        CodeModuleManager.saveNewModule(newModuleHandles[i], true);    }}
  
  for (int i = 0 ; i < codUrls.length ; i++){    if (newModuleHandles[i] != 0)    {        String modName = CodeModuleManager.getModuleName(newModuleHandles[i]);        System.out.println("adding module " + modName);    codeModuleGroup.addModule(modName);    }}
  
  codeModuleGroup.store();
  

  It does not work because you are breaking modules in parties to the arbitrary limit (64 k) and then recording these pieces using the CodeModuleManager API as if they were modules.

  Things to keep in mind:

  * A COD file can contain one or more modules. If it contains several modules, then the COD file is just a ZIP file without compression and each module is a file entry in the ZIP file.

  * The CodeModuleManager API works on modules instead of COD files.

  Therefore, you need to need to get the COD modules or files and stream then one by one and without breaking any which module to pieces at CodeModuleManager. You could achieve this by ensuring that you download are simple-module-COD-files (e.g., unpack the composite cod on the web server), or you can download a COD file and then unzip it into modules on the device (uses more memory).

  PS You are unable to read the entry correctly HTTP: method (byte []) read from the input stream only is not guaranteed to read all the data that you have asked, so, on top of the arbitrary question above with modules into pieces, you couldn't even read the modules in its entirety. You will need to loop until you have read everything you wanted, or until the input stream is closed prematurely.

• After one of the recent Firefox update the touchpad MAC cannot pinch and press (zoom) material has been checked, any ideas?

  seyit irgend einem the last Firefox update works die zoom-Funktion of touchpads to MACs nicht mehr nur bei Seiten im browser Firefox however!

  Some actions have been removed in versions of Firefox 4 +.

  You can restore the zoom feature by changing the related values of downtown on the topic: config page.

  • Browser.Gesture.Pinch.in -> cmd_fullZoomReduce
  • Browser.Gesture.Pinch.in.Shift-> cmd_fullZoomReset
  • Browser.Gesture.Pinch.out-> cmd_fullZoomEnlarge
  • Browser.Gesture.Pinch.out.Shift-> cmd_fullZoomReset
  • Browser.Gesture.Pinch.Latched-> false

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed also show "BOLD" (user set).
  • Preferences can be reset to the default value using the context menu if they are set of users
  • Preferences can be changed via the context menu: Edit (string or integer) or toggle (Boolean)

• Update error 80073712 windows code says that he has never checked for updates update failed on 22-08-08

  When I click on windows update after checking for awhile, I have error code 80073712 impossible to verify updates

  http://support.Microsoft.com/kb/957310

  «Error message when you try to install updates on the Microsoft Update or Windows Update Web site: «0 x 80073712 "»

  To resolve this problem, use the following methods in the order in which they are presented.

  Back to top

  Method 1: Run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

     For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:

     947821 (http://support.microsoft.com/kb/947821/) Description of the update readiness tool for Windows Vista system
  2. Try to install updates again.

  Note After running the tool, the Checksur.log file is stored in the following location:

  %SystemRoot%\Logs\CBS

  In a default installation of Windows Vista, is the Windows directory.

  If this method does not resolve the problem, go to method 2.

  Back to top

  Method 2: Install Windows Vista Service Pack 1 if you have not yet installed Windows Vista Service Pack 1 (SP1), visit the Microsoft Download Center and then download and install Service Pack 1. To do this, follow these steps:

  1. Quit all programs, and then click on the following link:
     http://www.Microsoft.com/downloads/details.aspx?FamilyId=f559842a-9c9b-4579-b64a-09146a0ba746&displaylang=en (http://www.microsoft.com/downloads/details.aspx?FamilyID=f559842a-9c9b-4579-b64a-09146a0ba746&DisplayLang=en)

     Note Click the option to download on the download page, click Save, and then save the download to your desktop. When the download process is complete, click run to install the SP1.

  2. Restart the computer.
  3. Try to download the updates again.

  If you can't always install updates, go to method 3.

  Back to top

  Method 3: Perform a repair of Windows Vista installation when you perform a repair installation, which restores the current installation of Windows Vista to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows Vista.

  To perform a repair of Windows Vista installation, follow these steps:

  1. Restart the computer.
  2. Insert the Windows Vista DVD into the DVD drive of the computer.

     Note If Windows does not automatically detect the DVD, click on Start, type: \setup.exe in the Search box, and then click configuration in the list programs. Then, click install now.

  3. Click connect to get the latest updates for installation (recommended).
  4. Insert the product key if you are prompted to do so.
  5. Click to accept the Microsoft software license agreement.
  6. On the screen which type of installation you want , click upgrade.
  7. Once the installation is complete, restart the computer, and then try again to install updates.

  See you soon.

  Mick Murphy - Microsoft partner

• I have problems with my computer with the time remaining after I reset the clock and made sure it was on the correct time zone and summer time has been check the battery has also been replaced

  and it will not keep the exact time it will keep accelerate at least 5 minutes or more.

  I don't know what else to do about it. You can someone help me?

  I still find myself make too many assumptions.
  First of all, I guess your derivative of clock occurs during the time when the computer is running and not during the period where it is off (or immediately early)?
  Second, I'm assuming that when you run the command "w32tm/Resync" above, the clock made it back to the correct time and no errors were reported?
  Third, you say that your clock drift 5 minutes or more, but you do not tell us how long this gain occurs.  It is two times more win if you wait twice as long to check?  Is the gain gradual or sudden?  Keep he wins or if he stops wins once it arrives before?

  Conditions of default for a computer connected non-member of the field, the time will be updated network-time only at the start and then once a week.  If you are winning too much too quickly, you can adjust how many times your computer asks for time.  Computers in the domain must be more precise and one every hour for a default time synchronization.  You can set your W32tm to that of a computer in the domain to resynchronize your computer more often (SpecialPollInterval).  Here are two articles that describe the clock settings:

  "How to synchronize the time with the time service Windows in Windows XP"
    <>http://support.Microsoft.com/kb/307897 >
  "Time Windows Services tools and settings.
    <>http://TechNet.Microsoft.com/en-us/library/cc773263%28V=WS.10%29.aspx >

  HTH,
  JW

• WordPad has taken over my computer

  WordPad opens all my files and desktop shortcuts I can't even open the windows Explorer opens a kind of computerspeak even when I try to change my default programs

  [Transferred from Internet Explorer]

  See http://www.winhelponline.com/articles/105/1/File-association-fixes-for-Windows-Vista.html

• OfficeJet 6500 has more - check print alignment too high

  I can't find a way to align my checks in the printer. They are too strong impression on the form.

  Hi MMSINC,.

  You could try printing that check it with the option to print value quality draft Mode.  See Page 30  Who help me?

• When a box has been checked (onclick event) HTTP post?

  Is it possible to make a post http for each event onclick on the boxes?

  I need to display data with parameters to an API or something that can be sent in an HTTP post.

  OK, just wanted to make sure. Take a look at the Net.HTTP object. It has a single method, application, which allows to you providing a HTTP request such as GET, POST, etc. But read the documentation, there are some serious limitations on this method. The a key being i.e. must be run from a script to the folder level.

  Alternatively, you can use the app.launchURL () method to open a web page. The user will need to enable it, if.

• Calling a SQL function which has Out parameters

  Hello people,
  I don't know if it's feasible, but here's my scenrio at hand. I have a database function that accepts a few parameters AND OUTPUT parameters. I want one Out to display in my select statement parameters. Is this possible?
  
  Thank you

  No you can not use a function with out parameters in sql statements.

  If possible do the function of this return value, use it in select. (imean instead of the parameter, OUT out which parameter through the BACK)

  G.