Workspace restores does not correctly - 11.1.2.1

Similar Questions

• Clip speed restores does not correctly

  I am changing a video clip in Photoshop CC. The original file is a. MOV shot on a Nikon D610. I'm trying to slow down a second clip 6 to 40%. The problem is that when I give it (for a mp4) video is slow, but ends after 6 seconds. Any suggestion would be appreciated. Let me know if more information would be helpful. Thank you!

  Check the length of your timeline. It is by default all the original item and may have to be postponed.

  Mylenium

• Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Scenario is,

  1. smart card reader is connected to the VM with card inserted in

  2 initiate a prompt suspension of the VM toolbar

  3. now to resume the virtual machine by using vmrun command into the host machine

  WS t vmrun start xxx.vmx

  Now, the recovery of VM but the smart card reader that was previously connected does not work properly in VM that is to say, sometimes after CV chip card reader driver is uninstalling and a few other times, chip connected to the drive is not available on a virtual computer

  My requirement is after power, smart card reader can stay connected to the virtual computer with the already installed driver and the smart card.

  Kindly help with this problem.

  Host operating system: Victoire 2012 R2

  The VM OS: win 10 x 64

  Thank you!!

  Dear all,

  I had a work around for this problem. By adding "usb.autoConnect.device0 ="0xVID:0xPID"" this statement to the VMX file, solves this problem, that is, whenever the VM is wake-up by clicking on the link CV or using vmrun commands, it connects the unit in question automatically and it is charging correctly with his driver. Obtaining smart card detected after sleep\hibernate with no problems.

  VID & PID is respective ID of the device that can be seen in the properties of the Device Manager "Device Instance path".

  For more information about this, visit VMware KB: automatic connection of USB devices to the virtual machine power on

  ~ Surendra

• Update KB976902 now the mouse doesn't work does not correctly

  I had the KB976902 recently updated on 2 of the 3 computers and 2 who got now have a mouse that does not correctly.  The computer number 3 does not have the update and still works fine.  All three are almost identical hardware and software and have legitimate versions of windows 7.

  The problem of the mouse made play almost almost impossible. Left click crashes, lag mouse click one or two times when I I try to do a restore from the left eventually drag a shortcut of the thing, I clicked on and don't know how or why.

  I did a restore on a single computer, but it did not help.

  Norton and McAfee applications are notorious for not to uninstall (or upgraded) themselves. Since you are not sure, I'll have to have executed two removal on all of the computers in question tools.

  NB: If a step said to reboot, reboot!

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file saved in # 1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  3B. right-click on the file saved in # 1 b above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  4 reset the IE8 advanced settings by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

  5. open Internet Explorer 32-bit (only!) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  6. restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My ipod does not correctly install when I plugged in now mobile USB keeps freezing

  My ipod does not correctly install when I plugged it into USB. Since then, my laptop keeps freezing / crashing.  Start repair found the problem mentioned but could not fix it and just send an error report.

  I tried restoring the system and installed the updates of windows, but I still have the problem. I reinstalled itunes and my AV is up to date, I can't find a solution.

  Hello

  1. are you confronted this question all the time or only when using the IPOD?

  2. What is the brand and model of the computer?

  3 Please, try to connect the Ipod to different USB ports in the back and the front of the tower and check if you face the same problem.

  Please follow the links below to solve the problem.
   
  Method 1
   
  Start your computer in a clean boot and check for conflicts with third-party software.
   
  Start your computer in a clean boot.

  
  http://support.Microsoft.com/kb/929135
   
  Note: Please follow step 7 of the article mentioned below to start the computer normally, after completing the necessary troubleshooting.
   
  Method 2

  Step 1

  What is safe mode?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-safe-mode

  Step 2

  Install this update and check if the problem is resolved.

  Update for Windows Vista (KB925528)
  
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=620

  Also try to update the latest version of the drivers your controllers USB host, on the manufacturers site.

  I hope this helps.

• System Restore does not work completely. Virus problem?

  When the System Restore dialog box asks me when I want to restore from I can not pass separating two to another. The instructions are to click on a date "BOLD", but most of the dates are "BOLD", (b) none of them are clickable outside today and (c) the back arrows for the previous month, while only clickable, do nothing.

  I think I have a virus or somesuch and wants to do a restore. Maybe the virus of going to stop.

  WXP SP3 Prof

  Viruses often attack the system restore because it's such a threat to them - which is certainly possible.  Unfortunately, all my anti-virus, anti-malware and anti-spyware solutions are for Vista (which is the Forum, you are in).  You must post this question in the appropriate forum where they have the information, procedures and links to help you.

  One thing, if the system restore does not work in normal mode, it sometimes will run in Mode safe then start safe mode and try it.

  In addition, if you use any Norton product, turn it off, then restart and try to restore again - Norton is known to cause problems with system restore.

  Sometimes, the problem can be solved by turning the restoration of the system off and then back on.  Unfortunately, a side effect of this is to lose all your restore points you want to restore this may not be such a good option to try (even if it can correct the underlying problem): http://support.microsoft.com/kb/310405/en-us.

  If none of the above works, please repost your question on the Forums of XP to: http://social.answers.microsoft.com/Forums/en-US/category/windowsxp where the XP experts will be happy to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• my system restore does not work, nothing is changed

  I have vista home premium and my system restore does not work no matter how, I try

  Hello

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• with firefox 43 yahoo and yahoo mail doesn't work does not correctly

  With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

  I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

  Thanks for the help!

• disc eject does not correctly persist

  I get several error messages that my external hard drive was not ejected correctly. I ejected it, turned off, unplugged and then reverse the process. Whenever my screen locks when I open it there are several messages not eject disks does not correctly.

  Restart your Mac, and then drag the disc on the desktop for the external drive to the trash.

• HP jet 7500 a desktop: office jet 7500 a print does not correctly

  Hello
  After you run the print doctor, cleaning and aligning the print heads that it is still print does not correctly. the first page comes out perfect so the print quality gets worse, with bits wilted and things missing. just print a page of print quality and black looks at all and the first steps of pink and yellow are strong, blue stripes and then 2nd very faded pink and yellow bar.
  any ideas?

  Hey watch this video of HP, how do I solve this https://www.youtube.com/watch?v=c422Q-EhMXI if this fixed your problem can you give me a point of congratulations. Thank you

• I have an index page that does not correctly load the css and css works on all other pages of the site.

  http://www.boulderridgecondos.com/ does not correctly load the css, but all other pages of the site loading the css correctly. There is nothing (that I can identify) between pages.
  http://www.boulderridgecondos.com/news.htm

  I guess something is wrong in the css, I inherited this site and have exceeded the css but can't find a problem that would cause this to happen.

  Any help or suggestion looking for something would be appreciated.

  This page is saved in UTF-16 format (Content-Type: text/html (UTF-16 BOM, litte-endian)) in your text editor. The CSS file is sent as ISO-8859-1. Firefox fun to see all the files in the same encoding. The other pages are send as ISO-8859-1 and so use the CSS file. You will need to re - save this page as ISO-8859-1 and download the corrected version.

• System Restore does not-how do to adjust settings

  System Restore does not work on my laptop.
  It did not work because the new toshiba set by phone for me when I bought it.
  But now I formatted it and its not working yet.

  Any help on how to adjust the settings.

  Hello

  It's very easy
  First you should check if the system restore is not disabled on your laptop.
  This can be checked in the control-> system-> System Restore tab panel.

  You have to uncheck the option called turning off the coast of the the system restore on all drives.
  Please check if there is enough free space on the two drives for the files in system restore.
  In the settings you must set the disk space to use to the maximum!

  After restarting again you should start the System Restore tool and should create a system restore point.

  Good luck

• Satellite A200 does not correctly reduce or increase the volume

  Hello

  Our Satellite A200 is having problems with its Volume control wheel.
  If I turn the wheel (on the left or in the past), it does not correctly to reduce or increase the volume level.
  He jumps rather the volume level in seemingly random directions (with a preference for the volume).
  Turn the wheel slowly improves responsiveness a little, but it remains quite impossible to increase or decrease the volume control that to be.

  BTW, I am well aware that the volume control wheel is a wheel of puls-encoder rather than ye olde potentiometer.

  -Can anyone you tell me where I can find the configuration that is responsible for this Volume control wheel?
  -Which driver/firmware is attached to the order of the volume control?
  -How can I determine if this is a hardware or software problem?

  Advice would be welcome.

  Stephan

  Hello

  There is no software or hardware problem.
  It is a new generation of volume control.

  First of all there is no mechanical limit turning right or left.
  In addition, this volume controller works a little different than the old volume controllers. The volume can be increased and decreased using the fixed rate

  By the way;
  > Can someone tell me where I can find the configuration that is responsible for this Volume control wheel?
  You can change the volume as in the sound settings that could be found in the control panel.
  > Which driver/firmware is attached to the order of the volume control?
  Audio driver controls the volume controller.
  > How can I determine if this is a hardware or software problem?
  There is no problem

• error code 259 does not correctly updated to sp62736.

  I have a Hp Pavilion 500-141ea im trying to update the IDT audio driver for windows 8, I supported SP sp62736, it passes through the installation procedure, then it stops and comes up with this error code 259 does not correctly updated, I even disabled etc still the same antivirus software.

  Any idea?

  Hi Apache1968,

  If everything works at the moment, with the exception of downloading then I would leave it as it is. The whole "don't mess with what works" thing.

  Thank you

• Why is one of my 4 5893 Modules doesn't work does not correctly?

  Hello

  This is the configuration of my HW and SW:

  LabView 2013 SP1

  1 x cRIO 9076

  4 x NI 9853 CAN Modules

  CAN0 - 1000 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  CAN1 - 500 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  I worked on a program for a test system, where each Module 9853 control two devices (CAN0 and CAN1), the same type of systems is controlled by other 9853 3 Modules in parallel.

  So basically, I use exactly the same functions for each module. So far, everything has worked correctly on module 1, but now that I started to test all other modules I have the problem that Module 3/CAN0 does not correctly read the information.

  While watching the FPGA façade, I see that each 10000ms one value is read, but only on that ONE module (frames are sent every 1ms from my unit)

  I tested the HW itself using the included examples and it works correctly, the only difference is that the example used only 2 Modules, one to send data and the other to receive it.

  I included my FPGA program as an image, I really don't think there is a problem with my RT SW, because all the other modules are working properly. Basically, my SW FPGA bed CAN Modules and puts the information in a FIFO, if there is an error (no information), it will make a loop once more and check again.

  Thanks for your help

  I solved the problem, it was an error of configuration on my side.

  The entry for Module3 CAN1 time-out was set up NOT as 0ms and 10000ms as I thought! , so that was my reading for DUT3 loop run only every 10000ms.