write on the screen turned upward on the side?

Similar Questions

• The icon on the screen when I turn upward or down or the sound does not appear

  I don't know if this is the right topic for my problem...

  I have a pavilion dv6-3299en Nightingale. I uninstalled a few additional features, and then I had a very small problem.

  It; s not a lot but I want to be resolved.

  When I turn upwards or downwards the sound or turn off the power by pressing the buttons, there was an icon, a picture with the level of the sound that appeared, now it doesn't.

  Same thing when the sound is off, it shows not a picture with a red line... I hope you understand what I'm talking about.

  With mousepad without problem, when I doubleclick the corner up and to the left, an image which shows a Redline on it when it's OPI nothing when turned on.

  Hope you can help me. There is nothing important, but it is useful.

  Konstantina salvation,

  Which could well be the problem; Try the following.

  Download and install HP MediaSmart Music on the link below.

  FTP://ftp.HP.com/pub/SoftPaq/sp51001-51500/sp51027.exe

  Once installation is complete, restart the computer and then reinstall HP MediaSmart SmartMenu again.

  HP MediaSmart SmartMenu

  Yet once, after the installation, restart the computer and see if the volume OSD has reappeared.

  Kind regards

  DP - K

• my screen shows only write in the upper left corner and there is no icon showing the shipment.

  When I go to compose a new message or reply to one... the screen don't watch 'write' in the top left corner where there is usually the send icon. The send icon is not here or anywhere else on the screen, so I'm unable to send new messages or respond to all messages. Thank you

  Open a window of writing.
  Press the alt key to display the menu bar.
  Select display-toolbar, and then turn your toolbars
  Sending is on the Composition toolbar.

• Access code is lost as soon as the screen turns off

  When I turn my wrist after that my Apple Watch screen exploded, I need to enter the access code. I turn on the wrist, the screen turns off, I turn back, screen lights up, I need to re-enter the password. And so on and so forth. The watch does not maintain the code.

  I am white white, is not dense hairs on my wrist, no tattoos and I wear the watch very well on my skin.

  The funny thing is: it is a replacement watch, I got today. The other had the same problem, but this is probably because the bottom of the watch with the sensors fell, must have damaged the sensor cable. But this one is brand new.

  Hello

  Make sure the wrist detection is enabled:

  • On your iPhone, in the application of the watch, go to: My Watch (tab) > General > detection of wrist - turn on.

• letters on the screen turns weird

  Dear reader,

  Sometimes my letters on my screen turn sometimes bizarre. Whenever I select the, they turn back to normal. Could someone give me the solution for this problem? Please see this image: http://www.iaza.com/work/130414C/iaza12974180292400.png

  Try the pref gfx.content.azure.enabled set to false or if this does not help disable Direct2D by setting the pref gfx.direct2d.disabled true on the subject: config page and leave hardware acceleration enabled otherwise.

  • http://KB.mozillazine.org/about:config

  Alternatively, you can try to uninstall the update of Windows KB2670838 if you have this update.

  • http://support.Microsoft.com/kb/2670838
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Want TO M9X67AV: The screen turns off, the computer remains on

  My screen seems to have a loose fitting. It turns off when it is tilted back. Just a slight pressure to the back of it turns on again, and then turns off. I tilt it forward to keep it on. The computer stays on, just the screen turns white.

  Hi @HPEnvyuser1,

  Thank you for visiting the HP Forums!

  You have come to the right place to ask questions, find solutions and get help from others in the community!

  You said that your 17 Notebook t-n100 HP ENVY is having problems with the connections of LCD screen. Here a link to your manual page, 19 for service check the connections of the display screen.

  If you are in warranty, please call us.

  Please get back to me how that happens.

  You can say thank you easily by clicking on the Thumbs Up below!

  Thank you.

• Satellite M70 - 340 - the screen turns black after that charge BIOS

  Satellite M70 - 340 screen turns black after that BIOS loaded. Please help

  Hi Totius,

  This means after the Toshiba BIOS screen, nothing happens or you tried upgrading the BIOS? Maybe you can explain that it still a little more detail.

  The problem is in this case you can t a lot because this problem of material based on s.

  You can try to remove the battery and the AC adapter at least an hour. Then connect the two devices again and try to start your laptop.

• Equium A20 fell and the screen turns off always

  Hi, I was using my satellite A20 long (4 years). Never had any problems. Recently he fell and the screen turns off always.

  I can see the toshiba logo and the windows logo also when starting, and even I can enter the BIOS and change the boot order too... but as soon as windows load screen is black. I don't understand

  Anyone with the solution?

  Thanks in advance...

  Hello

  > but as soon as windows load screen is black. I can t understand
  This means that the display output has accidentally changed to an external.

  Have you checked if something would be visible on the second external monitor?
  Select this check box.

  In addition I advise to use the FN + F5 keys to check if you can switch the output back to the internal display.

• Gigaframe L81 - after 2-3 seconds, the LCD screen turns off

  Hello!

  I think, I missconfigurated my camera... I put the automatic light (auto light) options, then the LCD is turned off. OK, its light of day here, but how can she Cook?

  And - perhaps because of the thing said? -its LCD screen turns off every time, when I push the power on button. I'm tired of using the reset switch, but she has - at least, in the LCD - no effect.

  Device is reset, then lights up the screen, I see him starting, I can touch control "buttons" on the right side (I can see the blue lights), but after only 2-3 seconds, the LCD display turns off again.

  Although I can do anything on my camera - attach PC files, copy or dele (ordered from Windows) etc. I just don't see anything in the LCD screen.

  What's wrong?

  If it still does not work after resetting it, then it may be a hardware problem.

  I think that you will need for repair/replacement.

• On the Satellite A210-14 t LCD screen turns black randomly

  For several days, I have the problem, my lcd screen turns black all of a sudden, the 'photo' is just disappearing. but the backlight is still and the system is still running (which happens most of the time in battery mode)
  When I close the laptop, pc goes into stand-by mode and so I open the pc again and the screen works again
  But this isn't really a solution.
  What can I do? Fresh grafix drivers are installed.

  BTW:
  I use WinXP

  HM, how long do you want the machine. Maybe you should check the powersaver for battery operation parameters when the display is sharp because it can be a characteristic powersaver the screen turns off.

  If please check your powersaver settings and set the time when the screen turns off at maximum or turn it off, then check if the error appears again.

  Would appreciate the your part feedaback. :)

  Welcome them

• Re: NB200 - making noise and the screen turns white

  Hello

  My laptop makes the high pitched noise and the screen turns white. Please help with this question.

  Thank you

  Hello

  It is especially as this problem with the inverter. She is, die, and made a noise of pitch. Try to connect the external monitor and check if it is displayed.

  Welcome them

• After the stand-by mode screen turns green or the GET messy graphics - Satellite M100-165

  When I leave my phone for more than 20 minutes on the stand of mode and I try to turn it on again the screen turns green or the graphics be annoying.
  In order to work, I have to reset and turn it back on. Does anyone know what I can do about it?
  Thanks in advance.

  Hello

  This problem occurs since the first day? Is your unit a clean install of the OS to factory settings?

• Satellite 1800 - 752S - the screen turns off

  Hello world.
  I have a satellite 1800 - 752S.
  Since an ew months ithas a weird problem: the screen turns off. If I press and release the button the lid on what it is, but after that turns off again quickly. OT goes off sometimes immediately, sometimes after a few minutes, or even hours. Sometimes it provides be when I run out of battery and bothers me on AC, sometimes against. It works fine, after I turn sleep or hibernation several times, and after a reboot, it bothers me. I've updated his BIOS for the lates on this site, which would not help. I guess it's a hardware problem, because it's the same problem under Linux, and I tried to install different versions of drivers and windows (not only the one of the recovery CD). Anyone have the same problem before. Any help will be appreciated.
  Thank you very much
  Roman

  Hello

  I think you're right, it's a hardware problem. But to be sure, try connecting an external monitor. If it works without problem while laptops, screen turns off, then it must be a hardware failure.

  I guess it's a problem with the FL inverter. You have to give your machine a service partner Toshiba for repair.

  Good bye

• Anyway continue Voiceover if the screen turns off?

  Hello world

  I use Voiceover to read eBooks for me, but the voice-over goes out once the auto lock turns off the display.

  Is it possible to do the Voiceover to continue even if the screen turns off?

  Thanks for your help!

  Hi Dionysus17,

  AFAIK the only way to solve this problem is to disable the auto-lock on your iPad. To do this, go to settings > General > lock and from here you can choose when you want to stay for before your locks iPad screen.

  Hope this helps,

  Aaron

• Screen turns black during a short period of time and after 5 seconds on the Satellite A200-1DN

  Hey there
  I have a little problem with my computer, when I start a game, more games, age of empires 3, nfs most wanted, grand theft auto: vice city etc, the screen turns black during the game and then corrects itself after a few seconds, it becomes boring xtremely, especially when you are in the middle of something.
  After that the game closed in the lower right of the screen in the taskbar, a pop up appears saying my display driver has stopped responding, resulting in at least 5 different file names that have stopped responding.

  I have a Toshiba TFT screen with direct x 10(which might be the problem with the older games,i think!).
  Any help would be appreciated.
  My computer configuration is the graphics card with 1.5 GB of RAM, vista and intel 950 processor intel dual core.
  THX.

  Have you tried to play a game designed to run under Vista OS or you have noticed that play WXP games on your laptop preinstalled Vista. If possible, try to get the Vista game and test it again.

  I wonder if something goes wrong, while playing older games WXP on Vista platform.